VNValeriy Novokhatniy

Valeriy Novokhatniy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Valeriy Novokhatniy has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    THE NEED FOR DEVELOPING BOREHOLE WATER SUPPLY SYSTEMS IN SMALL TOWNS AND SETTLEMENTS OF POLTAVA REGION

    by V. Novokhatniy, I. Usenko, S. Sadovyi, D. Gakh

    Poltava Region is geographically located above the center of the Dnipro-Donets Artesian Basin (DDAB), which lies within the sedimentary cover of the Dnipro-Donets Depression. Four aquifers are used for water supply: the Poltava, Kharkiv, Buchac-Kaniv, and Cenomanian–Lower Cretaceous aquifers. Several small towns and settlements in Poltava Region use groundwater from the Kharkiv and Buchac-Kaniv aquifers for centralized water supply. The Kharkiv aquifer has a limited yield, but the water is of high quality. The Buchac-Kaniv aquifer, while sufficiently productive, contains elevated levels of fluoride — up to 4 mg/dm³, exceeding the maximum permissible concentration of 1.5 mg/dm³. Consumption of such water leads to fluorosis among the population. To address the issue of providing the population with high-quality drinking water, three options were considered (using the town of Myrhorod as a case study). The first option was physicochemical water treatment to remove excess fluoride. However, the proposed methods were deemed unacceptable due to the potential toxic effects of residual aluminum in the treated water. The second option involved blending additional high-quality water from the Kharkiv aquifer in clean water reservoirs with fluoride-rich water from the Buchac-Kaniv aquifer. Calculations showed that fluoride concentration could only be reduced to 1.85–2.06 mg/dm³. Additionally, this would require drilling 14 new wells and decommissioning 8 existing ones. This option was rejected as both ineffective and economically unviable. The third option proposed the development of a decentralized borehole water supply system based on the high-quality groundwater from the Kharkiv aquifer. This borehole system is designed to supplement the centralized supply. The advantages of this approach include: elimination of fluorosis in the population; free access to safe drinking water for residents; provision of additional drinking water sources during martial law or emergencies; 24/7 availability of drinking water; improved reliability of water supply to the population. The main drawbacks are the need for substantial capital investment, maintenance and repair costs, and somewhat reduced convenience compared to in-home centralized supply. A representative example of such a system is Kyiv’s borehole water supply network, where more than 200 public boreholes have been constructed. Residents have free access to potable water at any time and use it extensively for both drinking and cooking. The borehole water supply system based on the Kharkiv aquifer is a radical solution for combating fluorosis in small towns and settlements across the central part of Poltava Region. This system is not intended as a replacement for centralized water supply, but rather as a valuable complement to it.

  • Open Access

    Approbation of the express penetration method for assessing the strength of sedimentary cohesive rocks

    by Yuriy Vynnykov, Andrii Bondar, Anna Liashenko, Valeriy Novokhatniy, Мaryna Rybalko

    The advantages of express methods of penetration and probing for evaluating the mechanical parameters of cohesive sedimentary rocks over traditional methods of testing them in single-plane displacement devices, odometers, and stabilometers are analyzed, such as: complete independence from the applied force and cone immersion depth; simplicity and reliability of the equipment; high reliability of results, etc. The methodology and results of 185 sets of penetration-shear tests of various clay rocks, from sandy loams to clays, are presented. Their results were used to determine the strength indicators of cohesive rocks (angle of internal friction and specific adhesion). Through statistical processing of experimental data, it was confirmed that for the water-saturated state of clay rocks there is an almost functional relationship between the penetration index and the porosity coefficient.

  • Open Access

    ENERGY SAVING THROUGH IMPROVED TOPOLOGY OF THE CITY WATER NETWORK

    by V. Novokhatniy, O. Matyash, I. Usenko

    This article compares the operation of the existing water supply system in the city Kremenchuk, Poltava region, namely the giving-distributive complex (GDC), which includes the main water network and the pumping station of the 2-nd lift, with the GDC, in which the topological structure has been improved by introducing a new section of the network. During the operation of the GDC, the tasks of repairing or replacing pipes of individual sections the water network constantly arise. At the same time, attention should also be paid to the topological structure of the water network during its reconstruction. The need to improve the topological structure is clearly seen after performing hydraulic calculations and building piezometric maps. For comparison, piezometric maps need to build before and after the reconstruction of the water network. At the nodal points of the network, a geodetic mark, free pressure and piezometric mark are shown. Considering that water moves from a larger piezometric mark to a smaller one, the directions of water movement and water network nodes with minimal free pressures are determined. At the same time, flaws in the topological structure are found on the piezomap, which should be eliminated in order to increase its dependebility. It is known that dependebility includes 3 components: reliability, maintainability and durability. Durability is ensured by the choice of pipe material during design. If we take into account simultaneously reliability and maintainability, then a complex indicator should be used, namely, the availability factor Ka. It estimates the probability that at any given time the section of water network is in working condition. According to the topological structure, the water network of the city should be looped and have more connections between nodes. But in practice, this principle can not always be maintained, given the planning structure of the streets the city. Graphical representation of hydraulic calculations using piezomaps allows you to identify overloaded sections of the water network and increase its dependebility. When improving the topological structure, it is necessary to use the prof. Novokhatniy principle, namely, new sections must be introduced so that they unite the existing nodes of the existing water network. Hydraulic calculations have shown that by improving the topological structure of the water network the city Kremenchuk, the annual energy saving is about 452 thousand kWh, which corresponds to a saving of about UAH 2.7 million per year (at the cost of electricity 6 UAH per 1 kWh). Keywords: water supply system, giving-distributive complex, water network, topology, energy saving.

  • Reliability Comparison Method of Rural Settlements Water-Supply

    by Valeriy Novokhatniy, Oleksander Matyash, Gulnar Feyziyeva, Sergiy Sadovyi


  • IMPROVEMENT OF THE MAIN WATER NETWORK FOR MIDDLE CITY

    by V. Novokhatniy, V. Usenko, O. Matyash, S. Sadovy

    In systems of centralized water supply, the givining-distribution complex (GDC) has the highest cost, including pumping stations, water pipes and water supply networks: main, street, intra-quarter. The economic efficiency of the operation of this complex directly depends on the technical condition of the facilities and equipment. But over time, the technical characteristics of both pumping units and pipelines deteriorate due to wear. Therefore, it is necessary to periodically check their technical characteristics, as well as evaluate the topological characteristics of the water network in the process of its development. This requires regulatory documents and research by specialists in this field of technical sciences. This paper presents an example of such an approach for the givining-distribution complex of the water supply system the medium-sized city Borispol (65 thousand inhabitants) of the Kiev region. To set the throughput of the main water network, hydraulic calculations were performed on a computer using the HIDRO program. It has been established that the main water network has sufficient capacity, as evidenced by the constructed piezometric maps. It has been established that the topological structure of the water network is imperfect. To improve the structure, it is proposed to loop the network by introducing an additional section. This section is introduced in parallel to two existing dead-ends. This improvement made it possible to reduce the pressure at pumping stations by 2.4 m and obtain an annual energy saving of 19.57 thousand kWh. Due to the commissioning of an additional section, a new network ring was formed and the reliability of water supply to a number water consumers increased more than 5.6 times. The indicated increase in the reliability of water supply is due to the fact that this section is introduced in parallel with 2 existing dead-end sections.

  • RELIABILITY OF WATER TREATMENT FACILITIES ACCORDING TO OPERATING DATA

    by V. Novokhatniy, S. Kostenko, O. Matyash, S. Sadoviy

    The centralized water supply system from the water source to the consumer includes 3 main complexes: water intake, water treatment and supply and distribution. The reliability of water supply in the area depends on the reliability of each of these complexes, which, in turn, consist of a number of structures. The paper develops the developed principle of assessing the reliability of water treatment plants (WPP) by quantitative indicators of the quality of treated water. The assessment of the reliability of the current WPP was performed to reflect its work, which implements the "black box" model. That is, some process parameters have one value at the input and other values at the output. The disadvantage of this method is that it is impossible to assess the reliability if the process does not occur. In addition, it is impossible to assess the reliability of the BOC for another set of individual structures. And the advantage is the sufficient simplicity of calculating the reliability indicator. Data on the purification of the Dnieper water at the Kremenchug WPP in terms of turbidity and chromaticity are used. Graphs of average variable indicators of turbidity and chromaticity of Dnieper water at the entrance of the WPP and graphs of exceedances of maximum permissible concentrations of treated water are constructed. The main indicator of reliability for municipal water supply facilities is the coefficient of readiness of KD, and the basic indicators of reliability are the average operating time for failure T and the average recovery time of the TR. The possibility of calculating the coefficients KD downtime and KR readiness in case of exceeding the MPC treated water is shown. After analyzing the graphs of water quality indicators, it was determined that the greatest turbidity and chromaticity of the Dnieper water is observed in the autumn.


  • The Influence of Oxygen Regime on Aerotank-Displacer with Fixed Biocenosis Operation

    by Andriy Karahiaur, Tamara Airapetian, Valeriy Novokhatniy, Oleksandr Matyash


  • Principle of Equireliability at the Internal Water-Supply System Design

    by Valeriy Novokhatniy, Oleksander Matyash, Sergiy Kostenko, Stepan Epoian


  • Open Access

    INCREASING OF THE RELIABILITY CITY'S WATER SUPPLY SYSTEM THROUGH ZONING

    by О. Matyash, V. Novokhatniy

    The article analyzes the topical issue of assessing the reliability of water supply in Kremenchuk, Poltava region, in the zoning of the water supply system. The scheme of the integrated water supply system of Kremenchuk was built to calculate reliability, which reflects the movement of water from the source to the consumers and the main structures of the water supply system. The work of the water supply system of Kremenchuk and its structure is analyzed. In terms of reliability, it is concluded that water pipes are the least reliable element. The statistics on the failures of the water supply systems of the city of Kremenchuk are analyzed. The calculations showed that the actual failure rate for steel pipes d = 1100 mm of water pipes in Kremenchug is 2 failures per 10 km of steel pipe per year, which is 2 times higher than foreign and domestic data. The reliability assessment of both the integrated and district water supply system of Kremenchuk was performed on the failure of water supply systems for both separately connected individual elements. Comparative analysis of reliability of the integrated and district water supply system of Kremenchuk without fail has shown that the zoning significantly increases the reliability of water supply in the Kryukivsky district, and the reliability of water supply of the Avtozavodsky district remains unchanged. In the integrated system in the Kryukiv district, the parameter of the flow of failures was 1/year, that is, about 3 times a year a break in water supply is possible. In the district system, both systems operate independently, which is why everything remains unchanged in the Avtozavodsky district, and the failure flow parameter for the Kryukivsky district is significantly reduced and is: 1/year, which corresponds to a water supply interruption of about once every 2.5 years. Thus, zoning can increase the reliability of water supply in the Kryukovsky district of Kremenchuk approximately 8 times. Keywords: the water supply system, reliability, dependability, zoning.