Maria T. S. da Fonseca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Maria T. S. da Fonseca has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Ana Paula Trindade Rocha
Universidade Federal de Campina Grande, Agricultural Engineering Academic Unit, Campina Grande, Paraíba, Brazil
3 shared publications - Josivanda Palmeira Gomes
Centro de Tecnologia e Recursos Naturais, Federal University of Campina Grande, Campina Grande 58429-900, PB, Brazil
3 shared publications - Newton Carlos Santos
Department of Food Engineering Federal University of Campina Grande Campina Grande Paraíba Brazil
3 shared publications - Anna Emanuelle Soares Tomé
Laboratory of Biomass Processing, Food Engineering Department, Federal University of Campina Grande, 882-Universitário, Campina Grande 58429-900, PB, Brazil
2 shared publications - Fábio G. Teles
Department of Food Engineering, Federal University of Campina Grande, Campina Grande 58429-900, Paraíba, Brazil
2 shared publications - Railene Hérica Carlos Rocha Araújo
Academic Unit of Food Engineering, Center for Technology and Natural Resources, Federal University of Campina Grande, Campina Grande 58429-900, PB, Brazil
2 shared publications
Latest Publications
- Open Access
- 23 July 2025
- Published by MDPI AG in Polysaccharides
- Vol. 6 (3) , 64
Development and Application of Biodegradable Pectin/Carboxymethylcellulose Films with Cinnamon Essential Oil and Cold Plasma Modification for Chicken Meat Preservation
The present study aimed to develop biodegradable films formulated with pectin/carboxymethyl cellulose (CMC) and cinnamon essential oil, investigating the effects of CP treatment time on the properties of the films. The developed films were used as packaging to evaluate the shelf life of chicken meat. Biodegradable films were produced from a film-forming solution containing pectin/CMC, glycerol (30%), and cinnamon essential oil (2%). All formulations included the essential oil, and the control group corresponded to the film that was not subjected to CP treatment. The CP treatments were applied at 22.5 L/min, 20 kV, and 80 kHz for 10, 20, and 30 min. The results showed that increasing CP treatment time led to a progressive reduction in apparent viscosity, indicating improved homogeneity of the polymer system. Hydrophobicity increased with treatment time, as shown by a higher contact angle (from 51.15° to 62.38°), resulting in lower water solubility. Mechanical properties were also enhanced, with tensile strength rising from 3.29 MPa to 6.74 MPa after 30 min of CP. Biodegradability improved with treatment time, reaching 99.51% mass loss after 15 days for the longest exposure. Films produced from the solution treated for 30 min (FCP30) were most effective in extending the shelf life of chicken breast fillets, reducing lipid oxidation (TBARS: 61.9%), peroxide content (58.7%), and microbial spoilage (TVB-N: 59.2%) compared to the untreated film. Overall, the results highlight the importance of CP treatment time as a key factor in enhancing film performance, supporting its application in sustainable active packaging.
- 23 July 2025
- Published by MDPI AG in Polysaccharides
- Vol. 6 (3) , 64
Open AccessDevelopment and Application of Biodegradable Pectin/Carboxymethylcellulose Films with Cinnamon Essential Oil and Cold Plasma Modification for Chicken Meat Preservation
The present study aimed to develop biodegradable films formulated with pectin/carboxymethyl cellulose (CMC) and cinnamon essential oil, investigating the effects of CP treatment time on the properties of the films. The developed films were used as packaging to evaluate the shelf life of chicken meat. Biodegradable films were produced from a film-forming solution containing pectin/CMC, glycerol (30%), and cinnamon essential oil (2%). All formulations included the essential oil, and the control group corresponded to the film that was not subjected to CP treatment. The CP treatments were applied at 22.5 L/min, 20 kV, and 80 kHz for 10, 20, and 30 min. The results showed that increasing CP treatment time led to a progressive reduction in apparent viscosity, indicating improved homogeneity of the polymer system. Hydrophobicity increased with treatment time, as shown by a higher contact angle (from 51.15° to 62.38°), resulting in lower water solubility. Mechanical properties were also enhanced, with tensile strength rising from 3.29 MPa to 6.74 MPa after 30 min of CP. Biodegradability improved with treatment time, reaching 99.51% mass loss after 15 days for the longest exposure. Films produced from the solution treated for 30 min (FCP30) were most effective in extending the shelf life of chicken breast fillets, reducing lipid oxidation (TBARS: 61.9%), peroxide content (58.7%), and microbial spoilage (TVB-N: 59.2%) compared to the untreated film. Overall, the results highlight the importance of CP treatment time as a key factor in enhancing film performance, supporting its application in sustainable active packaging.
- Open Access
Ozone Aeration Enhance Flowability, Structure, and Antioxidant Activity in Blueberry Pulp Powder
Spray drying (SD) is widely used for fruit powder production, but hygroscopic compounds can affect flowability and cause stickiness. This study evaluated rice protein and rice starch as encapsulating agents during SD of blueberry pulp (BPP and BPS, respectively), combined with ozone aeration (BPP-O3 and BPS-O3), focusing on physical, morphological, structural, and bioactive properties, as well as 56-day stability. The process yield was 55.26% (BPP) and 52.5% (BPS) (p < 0.05). All microparticles had low moisture (<5.03%) and water activity (<0.21%). BPP had higher phenolic (308.60 mg GAE/100 g) and anthocyanin content (85.26 mg/100 g), while BPS had more flavonoids (33.84 mg CE/100 g). Ozone treatment increased solubility (89.10–91.27%) and reduced hygroscopicity (9.25–10.06%). Morphological analysis revealed that BPP produced smaller, uniform particles (11.70 µm), whereas BPS generated larger (16.67 µm) and more agglomerated particles. Ozone improved sphericity, reduced agglomeration, and enhanced flow properties. FT-IR analysis indicated no new functional groups but a reduction in absorbance bands. Ozone also enhanced the stability of bioactive compounds, reducing anthocyanin and flavonoid degradation over 56 days. Overall, BPP-O3 is a promising approach for producing functional powders with enhanced stability and physical properties, suitable for food applications.
Open AccessOzone Aeration Enhance Flowability, Structure, and Antioxidant Activity in Blueberry Pulp Powder
Spray drying (SD) is widely used for fruit powder production, but hygroscopic compounds can affect flowability and cause stickiness. This study evaluated rice protein and rice starch as encapsulating agents during SD of blueberry pulp (BPP and BPS, respectively), combined with ozone aeration (BPP-O3 and BPS-O3), focusing on physical, morphological, structural, and bioactive properties, as well as 56-day stability. The process yield was 55.26% (BPP) and 52.5% (BPS) (p < 0.05). All microparticles had low moisture (<5.03%) and water activity (<0.21%). BPP had higher phenolic (308.60 mg GAE/100 g) and anthocyanin content (85.26 mg/100 g), while BPS had more flavonoids (33.84 mg CE/100 g). Ozone treatment increased solubility (89.10–91.27%) and reduced hygroscopicity (9.25–10.06%). Morphological analysis revealed that BPP produced smaller, uniform particles (11.70 µm), whereas BPS generated larger (16.67 µm) and more agglomerated particles. Ozone improved sphericity, reduced agglomeration, and enhanced flow properties. FT-IR analysis indicated no new functional groups but a reduction in absorbance bands. Ozone also enhanced the stability of bioactive compounds, reducing anthocyanin and flavonoid degradation over 56 days. Overall, BPP-O3 is a promising approach for producing functional powders with enhanced stability and physical properties, suitable for food applications.
- Open Access
Probiotication of Plum Pulp and Conditions Effects Freeze-Drying in Cell Viability, Functional Properties and Antioxidant Activity
This study investigated the effects of fermenting plum pulp with Bifidobacterium animalis ssp. lactis (BAL) on its physicochemical and bioactive properties, as well as the optimization of the freeze-drying (FD) process to develop a fruit-based probiotic delivery system. Fermentation significantly reduced the pH and total acidity of the pulp, achieving a cell viability of 11 log CFU/mL. The FD process was optimized using a factorial design, with maltodextrin concentration (3, 5, and 7%) and freezing temperature (−150, −100, and −50 °C) as variables. The P2 experiment, which used 7% maltodextrin and freezing at −150 °C, showed the best results in terms of yield (25.67%), cell viability (8 log CFU/g), and probiotic survival rate (97.66%). Samples P5, P6, and P7, prepared with 5% maltodextrin and freezing at −100 °C, exhibited the highest levels of bioactive compounds and antioxidant activity (p < 0.05). During 28 days of storage, all samples maintained cell viability without significant logarithmic reduction. In summary, probiotic plum powders offer an excellent plant-based alternative for probiotic consumption, providing safe levels of beneficial bacteria and bioactive compounds with antioxidant action, meeting health and nutrition needs.
Open AccessProbiotication of Plum Pulp and Conditions Effects Freeze-Drying in Cell Viability, Functional Properties and Antioxidant Activity
This study investigated the effects of fermenting plum pulp with Bifidobacterium animalis ssp. lactis (BAL) on its physicochemical and bioactive properties, as well as the optimization of the freeze-drying (FD) process to develop a fruit-based probiotic delivery system. Fermentation significantly reduced the pH and total acidity of the pulp, achieving a cell viability of 11 log CFU/mL. The FD process was optimized using a factorial design, with maltodextrin concentration (3, 5, and 7%) and freezing temperature (−150, −100, and −50 °C) as variables. The P2 experiment, which used 7% maltodextrin and freezing at −150 °C, showed the best results in terms of yield (25.67%), cell viability (8 log CFU/g), and probiotic survival rate (97.66%). Samples P5, P6, and P7, prepared with 5% maltodextrin and freezing at −100 °C, exhibited the highest levels of bioactive compounds and antioxidant activity (p < 0.05). During 28 days of storage, all samples maintained cell viability without significant logarithmic reduction. In summary, probiotic plum powders offer an excellent plant-based alternative for probiotic consumption, providing safe levels of beneficial bacteria and bioactive compounds with antioxidant action, meeting health and nutrition needs.
- Open Access
- 3 December 2015
- Published by Grupo Verde de Agroecologia e Abelhas in Revista Verde de Agroecologia e Desenvolvimento Sustentável
- Vol. 10 (5) , 49-54
Avaliação física, físico-química e sensorial de cookies enriquecidos com farinha de açaí
Os biscoitos apresentam grande consumo, longa vida de prateleira e boa aceitação, e nos dias atuais têm sido formulados com a intenção de torná-los mais nutritivos para a melhoria da qualidade da dieta dos consumidores. O açaí apresenta alto teor de antocianinas e alto valor energético, sendo rico em fibras, vitamina E, proteínas, minerais e ácidos graxos essenciais como Ômega-6 e Ômega-9. O objetivo deste estudo foi elaborar biscoitos tipo cookies utilizando diferentes concentrações de farinha de açaí, avaliar suas características físicas, físico-químicas e a sua aceitação sensorial. A partir de uma formulação padrão, foram adicionados 100 g (FA), 80 g (FB) e 60 g (FC) de farinha de açaí totalizando três amostras. Avaliaram-se os biscoitos quando à umidade, cinzas, pH, acidez, cor e textura. Os testes sensoriais foram realizados com 50 julgadores não treinados, utilizando uma escala hedônica para avaliação dos atributos bem como o teste de intenção de compra. Não houve diferença significativa entre as diferentes formulações de cookies quando ao conteúdo de cinzas e para o parâmetro de textura fraturabilidade. A formulação A apresentou um valor muito elevado no parâmetro dureza (28,81 N) e uma coloração muito escura (L* 43,97). Os resultados da análise sensorial demonstraram satisfatória a aceitação do cookies com farinha de açaí, apresentado escores acima de 6,0 em relação a todos os atributos. A formulação B apresentou melhor escore para a intenção de compra e foi caracterizado pelos parâmetros sabor e aroma na análise de componentes principais, apresentando os melhores resultados para os parâmetros estudados. Evaluation of physical, physico-chemical and sensory of cookies with added acai flour Abstract: The cookies have great consumption, long shelf life and good acceptance, and nowadays have been formulated with the intention of making them more nutritious for improving the quality of the diet of consumers. Acai has a high content of anthocyanins and high energy value, being rich in fiber, vitamin E, protein, minerals and essential fatty acids like Omega-6 and Omega-9. The purposes of the present study was to create formulations of cookies by using different concentrations of flour acai, as well as to investigate their physical, physicochemical characteristics and sensory acceptance. From a standard formulation, was added 100 g (FA), 80 g (FB) and 60 g (FC) flour acai totaling three samples. We evaluated the cookies as to their moisture, ash, pH, acidity, color and texture. The sensory tests were conducted with 50 non-trained panelists, and a hedonic scale was used to evaluate the overall acceptance and attributes, purchase attidute was also investigated. There was no significant difference among the different formulations of cookies, where the contents of ash and the parameter fracturability texture. Formulation A showed a very high value in hardness parameter (28.81 N) and a very dark color (L* 43.97). The results of sensory evaluation showed satisfactory acceptance of cookies with acai flour, presented scores above 6.0 for all the attributes. The formulation B had higher scores for purchase intent and was characterized by flavor and aroma parameters in the principal component analysis and showed better results for the studied parameters.
- 3 December 2015
- Published by Grupo Verde de Agroecologia e Abelhas in Revista Verde de Agroecologia e Desenvolvimento Sustentável
- Vol. 10 (5) , 49-54
Open AccessAvaliação física, físico-química e sensorial de cookies enriquecidos com farinha de açaí
Os biscoitos apresentam grande consumo, longa vida de prateleira e boa aceitação, e nos dias atuais têm sido formulados com a intenção de torná-los mais nutritivos para a melhoria da qualidade da dieta dos consumidores. O açaí apresenta alto teor de antocianinas e alto valor energético, sendo rico em fibras, vitamina E, proteínas, minerais e ácidos graxos essenciais como Ômega-6 e Ômega-9. O objetivo deste estudo foi elaborar biscoitos tipo cookies utilizando diferentes concentrações de farinha de açaí, avaliar suas características físicas, físico-químicas e a sua aceitação sensorial. A partir de uma formulação padrão, foram adicionados 100 g (FA), 80 g (FB) e 60 g (FC) de farinha de açaí totalizando três amostras. Avaliaram-se os biscoitos quando à umidade, cinzas, pH, acidez, cor e textura. Os testes sensoriais foram realizados com 50 julgadores não treinados, utilizando uma escala hedônica para avaliação dos atributos bem como o teste de intenção de compra. Não houve diferença significativa entre as diferentes formulações de cookies quando ao conteúdo de cinzas e para o parâmetro de textura fraturabilidade. A formulação A apresentou um valor muito elevado no parâmetro dureza (28,81 N) e uma coloração muito escura (L* 43,97). Os resultados da análise sensorial demonstraram satisfatória a aceitação do cookies com farinha de açaí, apresentado escores acima de 6,0 em relação a todos os atributos. A formulação B apresentou melhor escore para a intenção de compra e foi caracterizado pelos parâmetros sabor e aroma na análise de componentes principais, apresentando os melhores resultados para os parâmetros estudados. Evaluation of physical, physico-chemical and sensory of cookies with added acai flour Abstract: The cookies have great consumption, long shelf life and good acceptance, and nowadays have been formulated with the intention of making them more nutritious for improving the quality of the diet of consumers. Acai has a high content of anthocyanins and high energy value, being rich in fiber, vitamin E, protein, minerals and essential fatty acids like Omega-6 and Omega-9. The purposes of the present study was to create formulations of cookies by using different concentrations of flour acai, as well as to investigate their physical, physicochemical characteristics and sensory acceptance. From a standard formulation, was added 100 g (FA), 80 g (FB) and 60 g (FC) flour acai totaling three samples. We evaluated the cookies as to their moisture, ash, pH, acidity, color and texture. The sensory tests were conducted with 50 non-trained panelists, and a hedonic scale was used to evaluate the overall acceptance and attributes, purchase attidute was also investigated. There was no significant difference among the different formulations of cookies, where the contents of ash and the parameter fracturability texture. Formulation A showed a very high value in hardness parameter (28.81 N) and a very dark color (L* 43.97). The results of sensory evaluation showed satisfactory acceptance of cookies with acai flour, presented scores above 6.0 for all the attributes. The formulation B had higher scores for purchase intent and was characterized by flavor and aroma parameters in the principal component analysis and showed better results for the studied parameters.