Kun Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kun Zhang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Weijin Kong
Shandong Jiaotong University
14 shared publications- Weijin Kong
College of Physics Science, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, People’s Republic of China
7 shared publications Feng Xia
Qingdao University
6 shared publicationsYan Liu
Qingdao University
6 shared publicationsChiyu Zhang
5 shared publicationsShixia Li
Qingdao University
5 shared publications
Latest Publications
- 9 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44407
Femtosecond laser direct writing of tapered waveguides in Tm:YAP crystals
We report on the design and fabrication of three-dimensional tapered depressed-cladding waveguides in Tm:YAlO 3 (Tm:YAP) crystals via femtosecond laser direct writing. By engineering a large input facet that gradually tapers down to a compact output core, these waveguides enable effective control over modal behavior. Three types of tapered configurations with reduction factors of 4:1, 3:1, and 2:1 have been demonstrated, all of which support single-mode propagation at the wavelength of 795 nm, 1064 nm and 4μm. The three-dimensional (3D) refractive index distributions of these tapered depressed-cladding waveguides were mapped, confirming negative refractive index changes within the laser-induced tracks. The beam simulation results illustrate the modal evolution process. Furthermore, the micro-modifications induced by laser irradiation have been investigated through confocal fluorescence measurements. The intrinsic luminescence features of Tm 3+ ions are well preserved within the waveguide regions. This work provides an effective method for fabricating compact 3D tapered waveguides in anisotropic crystals via femtosecond laser direct writing, holding significant potential for applications in miniature solid-state lasers.
- 9 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44407
Femtosecond laser direct writing of tapered waveguides in Tm:YAP crystals
We report on the design and fabrication of three-dimensional tapered depressed-cladding waveguides in Tm:YAlO 3 (Tm:YAP) crystals via femtosecond laser direct writing. By engineering a large input facet that gradually tapers down to a compact output core, these waveguides enable effective control over modal behavior. Three types of tapered configurations with reduction factors of 4:1, 3:1, and 2:1 have been demonstrated, all of which support single-mode propagation at the wavelength of 795 nm, 1064 nm and 4μm. The three-dimensional (3D) refractive index distributions of these tapered depressed-cladding waveguides were mapped, confirming negative refractive index changes within the laser-induced tracks. The beam simulation results illustrate the modal evolution process. Furthermore, the micro-modifications induced by laser irradiation have been investigated through confocal fluorescence measurements. The intrinsic luminescence features of Tm 3+ ions are well preserved within the waveguide regions. This work provides an effective method for fabricating compact 3D tapered waveguides in anisotropic crystals via femtosecond laser direct writing, holding significant potential for applications in miniature solid-state lasers.
- 8 June 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (10) , C24
Maximum extrinsic chirality driven by C points far from the Γ point
Bound states in the continuum (BICs) exhibit remarkable topological properties and can significantly enhance the interaction between light and chiral matter. By breaking the in-plane C 2 symmetry, pairs of circularly polarized states could spawn from the eliminated BICs. In this work, we propose a planar metasurface featuring a high Q -factor and maximum chirality simultaneously, driven by C points far from the Γ point. Through a comparative analysis of ellipticity maps under different structural parameters, we demonstrate that as the C points move farther away from the Γ point, the regions with high ellipticity expand in momentum space, resulting in a broader range of incident angles over which CD exceeds 0.9. Four perforated structures are further designed to validate this conclusion. Moreover, the metasurface enables continuous tuning of CD from −0.99 to 0.99 by independently adjusting the incident and azimuthal angles. The metasurface exhibits promising sensing performance in various environments with different refractive indices, maintaining relatively stable CD with a maximum sensitivity of 89 nm/RIU. This study provides a feasible strategy for designing high- Q chiral metasurfaces and offers platforms for chiral sensing, detection, and switching applications.
- 8 June 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (10) , C24
Maximum extrinsic chirality driven by C points far from the Γ point
Bound states in the continuum (BICs) exhibit remarkable topological properties and can significantly enhance the interaction between light and chiral matter. By breaking the in-plane C 2 symmetry, pairs of circularly polarized states could spawn from the eliminated BICs. In this work, we propose a planar metasurface featuring a high Q -factor and maximum chirality simultaneously, driven by C points far from the Γ point. Through a comparative analysis of ellipticity maps under different structural parameters, we demonstrate that as the C points move farther away from the Γ point, the regions with high ellipticity expand in momentum space, resulting in a broader range of incident angles over which CD exceeds 0.9. Four perforated structures are further designed to validate this conclusion. Moreover, the metasurface enables continuous tuning of CD from −0.99 to 0.99 by independently adjusting the incident and azimuthal angles. The metasurface exhibits promising sensing performance in various environments with different refractive indices, maintaining relatively stable CD with a maximum sensitivity of 89 nm/RIU. This study provides a feasible strategy for designing high- Q chiral metasurfaces and offers platforms for chiral sensing, detection, and switching applications.
- 30 March 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (13) , 135507
Environmental-adaptable near perfect chirality with ultra-high Q-factor based on BIC metasurface
Metasurfaces based on bound states in the continuum (BICs) present a promising opportunity for chiral responses with high quality factors ( Q -factors). Although some significant progress has been made in BIC-based chiral metasurfaces, most studies are primarily focused on intrinsic chirality and unpredictable extrinsic chirality, whose chiral behaviors are sensitive to the refractive index of the environment. In this work, we propose a strategy to design metasurface with near perfect chirality and ultrahigh Q -factor simultaneously in various environments, where the incident angle corresponding to the extrinsic chirality can be accurately predicted by the position of C -point. The chirality is attained by successively introducing the geometric perturbation to break the in-plane C 2 symmetry, and employing oblique incidence to break the out-of-plane mirror symmetry of the whole system. To verify the validity of the design approach, specific metasurface in terahertz band is constructed. As the surrounding refractive index changes in a wide range, the chirality can be optimized by the incident angle to achieve circular dichroism close to 1. Consequently, metasurface with near perfect chirality and high Q -factor can be obtained based on this design strategy, whose chiral response exhibits excellent environmental adaptability. This work provides a feasible pathway toward chiral pharmaceutical analysis and chiral molecule detection in various scenarios.
- 30 March 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (13) , 135507
Environmental-adaptable near perfect chirality with ultra-high Q-factor based on BIC metasurface
Metasurfaces based on bound states in the continuum (BICs) present a promising opportunity for chiral responses with high quality factors ( Q -factors). Although some significant progress has been made in BIC-based chiral metasurfaces, most studies are primarily focused on intrinsic chirality and unpredictable extrinsic chirality, whose chiral behaviors are sensitive to the refractive index of the environment. In this work, we propose a strategy to design metasurface with near perfect chirality and ultrahigh Q -factor simultaneously in various environments, where the incident angle corresponding to the extrinsic chirality can be accurately predicted by the position of C -point. The chirality is attained by successively introducing the geometric perturbation to break the in-plane C 2 symmetry, and employing oblique incidence to break the out-of-plane mirror symmetry of the whole system. To verify the validity of the design approach, specific metasurface in terahertz band is constructed. As the surrounding refractive index changes in a wide range, the chirality can be optimized by the incident angle to achieve circular dichroism close to 1. Consequently, metasurface with near perfect chirality and high Q -factor can be obtained based on this design strategy, whose chiral response exhibits excellent environmental adaptability. This work provides a feasible pathway toward chiral pharmaceutical analysis and chiral molecule detection in various scenarios.
- 29 January 2026
- Published by Elsevier in Photonics and Nanostructures - Fundamentals and Applications
- Vol. 70
Interlayer topological edge states and converters based on trilayer valley photonic crystals
- 29 January 2026
- Published by Elsevier in Photonics and Nanostructures - Fundamentals and Applications
- Vol. 70
Interlayer topological edge states and converters based on trilayer valley photonic crystals
- 28 December 2025
- Published by Elsevier in Optical Materials
- Vol. 172
Femtosecond laser direct writing of dual-wavelength waveguide lasers in Nd:YAP crystal
- 28 December 2025
- Published by Elsevier in Optical Materials
- Vol. 172
Femtosecond laser direct writing of dual-wavelength waveguide lasers in Nd:YAP crystal
- 18 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7235-7238
Tailoring polarization singularities in degenerate bands through structural symmetry and magnetic field
Polarization singularities have attracted considerable interest in photonic crystals (PhCs) due to their high quality factor and selective response to circularly polarized light. In this work, we propose a strategy to manipulate the evolution of polarization singularities within degenerate bands in the magneto-optical PhC slab, by breaking geometric symmetry through unit structures and time-reversal symmetry through magnetic field. For C 6 symmetry, the magnetic field lifts the degeneracy of bound states in the continuum (BICs), resulting in chiral BICs with opposite chirality. Reducing the symmetry to C 3 , an at-Γ parabolic point and six off-Γ circularly polarized points (C-points) are observed. Applying the magnetic field, the parabolic point splits into four new C-points that subsequently undergo pairwise merging and annihilation with the pre-existing ones as the field strength increases, illustrating rich topological dynamics. Upon reduction to C 2 symmetry, an at-Γ BIC and two off-Γ Dirac points are observed. Under the external magnetic field, the Dirac points evolve into two couples of C-points, where the surrounding highly circularly polarized states are simultaneously controlled by the field strength. In addition, flexible and on-demand modulation of the polarization singularities can be achieved by rotating the unit structure to break mirror symmetry and changing the magnetic field. Our work establishes the tuning approach of polarization singularities based on multiple symmetry-breaking, which enables effective chiroptical manipulation.
- 18 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7235-7238
Tailoring polarization singularities in degenerate bands through structural symmetry and magnetic field
Polarization singularities have attracted considerable interest in photonic crystals (PhCs) due to their high quality factor and selective response to circularly polarized light. In this work, we propose a strategy to manipulate the evolution of polarization singularities within degenerate bands in the magneto-optical PhC slab, by breaking geometric symmetry through unit structures and time-reversal symmetry through magnetic field. For C 6 symmetry, the magnetic field lifts the degeneracy of bound states in the continuum (BICs), resulting in chiral BICs with opposite chirality. Reducing the symmetry to C 3 , an at-Γ parabolic point and six off-Γ circularly polarized points (C-points) are observed. Applying the magnetic field, the parabolic point splits into four new C-points that subsequently undergo pairwise merging and annihilation with the pre-existing ones as the field strength increases, illustrating rich topological dynamics. Upon reduction to C 2 symmetry, an at-Γ BIC and two off-Γ Dirac points are observed. Under the external magnetic field, the Dirac points evolve into two couples of C-points, where the surrounding highly circularly polarized states are simultaneously controlled by the field strength. In addition, flexible and on-demand modulation of the polarization singularities can be achieved by rotating the unit structure to break mirror symmetry and changing the magnetic field. Our work establishes the tuning approach of polarization singularities based on multiple symmetry-breaking, which enables effective chiroptical manipulation.
- 1 November 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (11) , 115946
Design and optimization of acoustic absorber with ultra–broadband below 1000 Hz
Although existing studies have realized broadband absorption in different frequency ranges, achieving high-efficiency absorption across the entire 100 Hz to 1000 Hz band remains a challenge. In this work, we propose a coupled spiral porous lining metamaterial (SPLM) with air slits and attached porous material, exhibiting ultra-broadband sound absorption below 1000 Hz. The absorption coefficient of the SPLM can be calculated based on dual-porosity theory, whose accuracy is rigorously verified through simulations and experiments. Combining the theoretical model with the genetic algorithm, the coupled SPLM is automatically optimized, achieving a balance between increasing energy loss and decreasing resonant frequency by adjusting the coupling strength among the unit structures. The optimized structure achieves the absorption coefficient above 0.8 in the range from 82 Hz to 1000 Hz, with an average absorption coefficient of 0.86 and a relative bandwidth of 170%. This work provides a practical and generalizable strategy for the tailored optimization of ultra-broadband acoustic metamaterials at low frequencies, which can also be extended to other target frequency bands.
- 1 November 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (11) , 115946
Design and optimization of acoustic absorber with ultra–broadband below 1000 Hz
Although existing studies have realized broadband absorption in different frequency ranges, achieving high-efficiency absorption across the entire 100 Hz to 1000 Hz band remains a challenge. In this work, we propose a coupled spiral porous lining metamaterial (SPLM) with air slits and attached porous material, exhibiting ultra-broadband sound absorption below 1000 Hz. The absorption coefficient of the SPLM can be calculated based on dual-porosity theory, whose accuracy is rigorously verified through simulations and experiments. Combining the theoretical model with the genetic algorithm, the coupled SPLM is automatically optimized, achieving a balance between increasing energy loss and decreasing resonant frequency by adjusting the coupling strength among the unit structures. The optimized structure achieves the absorption coefficient above 0.8 in the range from 82 Hz to 1000 Hz, with an average absorption coefficient of 0.86 and a relative bandwidth of 170%. This work provides a practical and generalizable strategy for the tailored optimization of ultra-broadband acoustic metamaterials at low frequencies, which can also be extended to other target frequency bands.
- 6 November 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (12) , 2819-2829
Multi-scenario refractive index sensor based on merging BIC in an all-dielectric metasurface
In recent years, bound states in the continuum (BICs) in the all-dielectric metasurfaces have attracted considerable attention due to the low radiation loss and large quality factor (Q-factor). In this study, we design a highly sensitive refractive index sensor working in multi-scenario based on merging quasi-BIC in the silicon nitride metasurface. By adjusting the thickness of the metasurface and keeping the structural symmetry, nine BICs distributed in momentum space form the merging BIC at the Γ point with significantly enhanced Q-factor. The transmission spectra of the metasurface sensor disperse with the refractive index in multi-scenario. The modulation depth of the Fano resonance spectrum can exceed 99.9%. The sensitivity and figure of merit of the refractive index sensor based on the merging quasi-BIC can reach 41.35 nm/RIU and 13,389.1 RIU-1 for gas, 59.05 nm/RIU and 8,415.9 RIU-1 for blood, and 66.08 nm/RIU and 8,845.8 RIU-1 for cerebrospinal fluid, respectively. Furthermore, we investigate the influence of the structural deviations on the Q-factor, which of the merging quasi-BIC maintains higher than that of the isolated quasi-BIC. Our work offers a method for designing high-sensitivity sensors working in multi-scenarios, which may hold significant potential for enhancing device performance in gas and biological detection.
- 6 November 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (12) , 2819-2829
Multi-scenario refractive index sensor based on merging BIC in an all-dielectric metasurface
In recent years, bound states in the continuum (BICs) in the all-dielectric metasurfaces have attracted considerable attention due to the low radiation loss and large quality factor (Q-factor). In this study, we design a highly sensitive refractive index sensor working in multi-scenario based on merging quasi-BIC in the silicon nitride metasurface. By adjusting the thickness of the metasurface and keeping the structural symmetry, nine BICs distributed in momentum space form the merging BIC at the Γ point with significantly enhanced Q-factor. The transmission spectra of the metasurface sensor disperse with the refractive index in multi-scenario. The modulation depth of the Fano resonance spectrum can exceed 99.9%. The sensitivity and figure of merit of the refractive index sensor based on the merging quasi-BIC can reach 41.35 nm/RIU and 13,389.1 RIU-1 for gas, 59.05 nm/RIU and 8,415.9 RIU-1 for blood, and 66.08 nm/RIU and 8,845.8 RIU-1 for cerebrospinal fluid, respectively. Furthermore, we investigate the influence of the structural deviations on the Q-factor, which of the merging quasi-BIC maintains higher than that of the isolated quasi-BIC. Our work offers a method for designing high-sensitivity sensors working in multi-scenarios, which may hold significant potential for enhancing device performance in gas and biological detection.
- 23 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (15) , 4334-4337
Flatbands in a bilayer surface plasmon crystal at a large twist angle due to interlayer strong coupling
The twisted bilayer system provides an excellent platform for the study of flatbands. In this work, we propose a bilayer hexagonal boron nitride (h-BN)-like surface plasmon crystal at a large twist angle of 38.213° due to the interlayer strong coupling, in which the adjacent pillars are in different radii. We numerically and theoretically calculate the band structure while tuning the pillar radius ratio (PRR) and the interlayer separation distance. As a result, both increasing the PRR and decreasing the separation distance contribute to the transition from weak coupling to strong coupling, leading to the flatbands with slow velocity and large density of state. Consequently, the in-layer geometry as well as the separation distance offers the degree of freedom to achieve flatbands in the bilayer surface plasmon crystal. Our work provides a fundamental understanding of the band structure of the twisted bilayer photonic system, which enriches the methods to obtain flatbands at a large twist angle.
- 23 July 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (15) , 4334-4337
Flatbands in a bilayer surface plasmon crystal at a large twist angle due to interlayer strong coupling
The twisted bilayer system provides an excellent platform for the study of flatbands. In this work, we propose a bilayer hexagonal boron nitride (h-BN)-like surface plasmon crystal at a large twist angle of 38.213° due to the interlayer strong coupling, in which the adjacent pillars are in different radii. We numerically and theoretically calculate the band structure while tuning the pillar radius ratio (PRR) and the interlayer separation distance. As a result, both increasing the PRR and decreasing the separation distance contribute to the transition from weak coupling to strong coupling, leading to the flatbands with slow velocity and large density of state. Consequently, the in-layer geometry as well as the separation distance offers the degree of freedom to achieve flatbands in the bilayer surface plasmon crystal. Our work provides a fundamental understanding of the band structure of the twisted bilayer photonic system, which enriches the methods to obtain flatbands at a large twist angle.
- 31 October 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (23) , 41969-41979
Switchable multi-functional broadband polarization converter in terahertz band
In this work, we propose a multi-functional broadband terahertz polarization converter based on graphene-VO2 hybrid metamaterial, which can switch between transmissive linear-to-linear conversion and reflective linear-to-circular conversion. The function of the metamaterial can be controlled by both the temperature and the Fermi energy of the graphene. At 298K, the metamaterial converts the y-polarized wave into x-polarized wave in 0.39-1.22THz. In the meanwhile, changing the Fermi energy of graphene, the converted polarization angle can be tuned from 90° to 45°. Increasing the temperature to 358K, the incident linearly polarized wave is reflected into circularly polarized wave. On this condition, tuning the Fermi energy, the metamaterial can separately convert the linear polarization wave into left-circularly polarized wave in 1.57-2.74THz and right-circularly polarized wave in 1.13-1.59THz. Such a switchable multi-functional broadband polarization converter may achieve potential applications in compact terahertz devices and integrated terahertz circuits.
- 31 October 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (23) , 41969-41979
Switchable multi-functional broadband polarization converter in terahertz band
In this work, we propose a multi-functional broadband terahertz polarization converter based on graphene-VO2 hybrid metamaterial, which can switch between transmissive linear-to-linear conversion and reflective linear-to-circular conversion. The function of the metamaterial can be controlled by both the temperature and the Fermi energy of the graphene. At 298K, the metamaterial converts the y-polarized wave into x-polarized wave in 0.39-1.22THz. In the meanwhile, changing the Fermi energy of graphene, the converted polarization angle can be tuned from 90° to 45°. Increasing the temperature to 358K, the incident linearly polarized wave is reflected into circularly polarized wave. On this condition, tuning the Fermi energy, the metamaterial can separately convert the linear polarization wave into left-circularly polarized wave in 1.57-2.74THz and right-circularly polarized wave in 1.13-1.59THz. Such a switchable multi-functional broadband polarization converter may achieve potential applications in compact terahertz devices and integrated terahertz circuits.