Daniel Pereira
Daniel Pereira has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Ildefonso Marin-Montesinos
University of Aveiro
6 shared publications - Mariana Sardo
Department of Chemistry, CICECO, University of Aveiro, Aveiro, Portugal
6 shared publications - Luís Mafra
University of Aveiro
5 shared publications - Armando Maestro
Material Physics Center
2 shared publications Bjørnar Arstad
SINTEF industry, Forskningsveien 1, Oslo, Norway, NO-0373
2 shared publicationsIldefonso Marin-Montesinos
Department of Chemistry
2 shared publications
Latest Publications
- Open Access
- 9 September 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (37) , 27214-27225
Concentration-Dependent Modes of Melittin-Induced Membrane Destabilization: An Integration of Experimental and Computational Tools
Melittin is a well-known antimicrobial peptide whose mechanism of action is still not entirely understood. In this study, we combine complementary experimental techniques with molecular dynamics simulations to determine melittin-membrane interactions at different scales. Using 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE): 1,2-dipalmitoyl-sn-glycero-3-phospho-(1’-rac-glycerol) (DPPG) membranes that mimic the Escherichia coli inner membrane, this integrative approach reveals a clear transition in melittin’s mode of action with increasing peptide loading. At low concentrations, melittin primarily perturbs the membrane interface, inducing modest surface expansion and subtle lipid reorganization. At higher concentrations, the membrane response shifts toward increased hydration, lipid disorder, membrane thinning, and morphological remodeling. Simulations support these observations, linking concentration-dependent membrane responses to enhanced lipid mobility and stronger effects on anionic DPPG. Melittin, therefore, affects the membrane in a concentration-dependent manner, transitioning from surface-bound carpet-like permeabilization at low loading to transient pore formation and membrane reorganization at higher concentrations.
- 9 September 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (37) , 27214-27225
Open AccessConcentration-Dependent Modes of Melittin-Induced Membrane Destabilization: An Integration of Experimental and Computational Tools
Melittin is a well-known antimicrobial peptide whose mechanism of action is still not entirely understood. In this study, we combine complementary experimental techniques with molecular dynamics simulations to determine melittin-membrane interactions at different scales. Using 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE): 1,2-dipalmitoyl-sn-glycero-3-phospho-(1’-rac-glycerol) (DPPG) membranes that mimic the Escherichia coli inner membrane, this integrative approach reveals a clear transition in melittin’s mode of action with increasing peptide loading. At low concentrations, melittin primarily perturbs the membrane interface, inducing modest surface expansion and subtle lipid reorganization. At higher concentrations, the membrane response shifts toward increased hydration, lipid disorder, membrane thinning, and morphological remodeling. Simulations support these observations, linking concentration-dependent membrane responses to enhanced lipid mobility and stronger effects on anionic DPPG. Melittin, therefore, affects the membrane in a concentration-dependent manner, transitioning from surface-bound carpet-like permeabilization at low loading to transient pore formation and membrane reorganization at higher concentrations.
- Open Access
- 24 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Electrostatic templating and the dynamics of physisorbed CO2 ordering in CALF-20
Reducing CO2 emissions requires adsorbents combining high selectivity with large capacity, however the molecular origins leading to such properties remain poorly understood. Physisorbents are desirable for their low regeneration energy but they often lack the selectivity needed for efficient large-scale CO2 separation. While physisorbed guest molecules in porous media are typically modeled as disordered fluids, CALF-20 is known to impart some order in the CO2 adsorbed phase. Here, we use solid-state NMR to resolve the dynamics underlying this ordering: as CO2 loading increases, the adsorbed phase undergoes a pressure-driven transition from rapid, isotropic tumbling to a rigid, orientationally locked state in which CO2 molecules align with the alternating electrostatic potential of the pore surface. GCMC and DFT simulations link this electrostatic templating to specific host-guest interactions and reproduce its pressure-dependent evolution. This cooperative, loading-dependent stabilization is accessible only to guests bearing a sufficiently strong electric quadrupole moment to couple with the template, providing a molecular basis for the framework's marked CO2/N2 selectivity. Comparison with structurally related frameworks indicates that electrostatic templating extends beyond CALF-20 to other materials with complementary pore electrostatics, pointing to a design principle for tailoring adsorbent selectivity to a guest's electronic signature.
- 24 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectrostatic templating and the dynamics of physisorbed CO2 ordering in CALF-20
Reducing CO2 emissions requires adsorbents combining high selectivity with large capacity, however the molecular origins leading to such properties remain poorly understood. Physisorbents are desirable for their low regeneration energy but they often lack the selectivity needed for efficient large-scale CO2 separation. While physisorbed guest molecules in porous media are typically modeled as disordered fluids, CALF-20 is known to impart some order in the CO2 adsorbed phase. Here, we use solid-state NMR to resolve the dynamics underlying this ordering: as CO2 loading increases, the adsorbed phase undergoes a pressure-driven transition from rapid, isotropic tumbling to a rigid, orientationally locked state in which CO2 molecules align with the alternating electrostatic potential of the pore surface. GCMC and DFT simulations link this electrostatic templating to specific host-guest interactions and reproduce its pressure-dependent evolution. This cooperative, loading-dependent stabilization is accessible only to guests bearing a sufficiently strong electric quadrupole moment to couple with the template, providing a molecular basis for the framework's marked CO2/N2 selectivity. Comparison with structurally related frameworks indicates that electrostatic templating extends beyond CALF-20 to other materials with complementary pore electrostatics, pointing to a design principle for tailoring adsorbent selectivity to a guest's electronic signature.
- Open Access
- 10 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Electrostatic templating and the dynamics of physisorbed CO2 ordering in CALF-20
Reducing CO2 emissions requires adsorbents combining high selectivity with large capacity, however the molecular origins leading to such properties remain poorly understood. Physisorbents are desirable for their low regeneration energy but they often lack the selectivity needed for efficient large-scale CO2 separation. While physisorbed guest molecules in porous media are typically modeled as disordered fluids, CALF-20 is known to impart some order in the CO2 adsorbed phase. Here, we use solid-state NMR to resolve the dynamics underlying this ordering: as CO2 loading increases, the adsorbed phase undergoes a pressure-driven transition from rapid, isotropic tumbling to a rigid, orientationally locked state in which CO2 molecules align with the alternating electrostatic potential of the pore surface. GCMC and DFT simulations link this electrostatic templating to specific host-guest interactions and reproduce its pressure-dependent evolution. This cooperative, loading-dependent stabilization is accessible only to guests bearing a sufficiently strong electric quadrupole moment to couple with the template, providing a molecular basis for the framework's marked CO2/N2 selectivity. Comparison with structurally related frameworks indicates that electrostatic templating extends beyond CALF-20 to other materials with complementary pore electrostatics, pointing to a design principle for tailoring adsorbent selectivity to a guest's electronic signature.
- 10 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectrostatic templating and the dynamics of physisorbed CO2 ordering in CALF-20
Reducing CO2 emissions requires adsorbents combining high selectivity with large capacity, however the molecular origins leading to such properties remain poorly understood. Physisorbents are desirable for their low regeneration energy but they often lack the selectivity needed for efficient large-scale CO2 separation. While physisorbed guest molecules in porous media are typically modeled as disordered fluids, CALF-20 is known to impart some order in the CO2 adsorbed phase. Here, we use solid-state NMR to resolve the dynamics underlying this ordering: as CO2 loading increases, the adsorbed phase undergoes a pressure-driven transition from rapid, isotropic tumbling to a rigid, orientationally locked state in which CO2 molecules align with the alternating electrostatic potential of the pore surface. GCMC and DFT simulations link this electrostatic templating to specific host-guest interactions and reproduce its pressure-dependent evolution. This cooperative, loading-dependent stabilization is accessible only to guests bearing a sufficiently strong electric quadrupole moment to couple with the template, providing a molecular basis for the framework's marked CO2/N2 selectivity. Comparison with structurally related frameworks indicates that electrostatic templating extends beyond CALF-20 to other materials with complementary pore electrostatics, pointing to a design principle for tailoring adsorbent selectivity to a guest's electronic signature.
- Open Access
- 30 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (19) , 12964-12977
Deciphering CO2 Adsorption Mechanisms at the Atomic Scale in Cellulose and Chitosan Aerogels
Biopolymer-based aerogels have emerged as promising CO2 adsorbents for large-scale implementation due to their abundance, renewability, and low cost. However, the CO2 capture mechanisms of these materials remain poorly understood. In this study, we exploit the structural similarity between cellulose and chitosan to investigate how surface chemistry governs the CO2 adsorption mechanisms using a combination of solid-state nuclear magnetic resonance (ssNMR) spectroscopy and density functional theory (DFT) modeling. We reveal that cellulose aerogels adsorb CO2 exclusively via physisorption, whereas chitosan aerogels exhibit both physisorption and chemisorption. Chemical shift analysis, supported by DFT calculations, identifies two chemisorbed species in chitosan: carbamic acid (159.0 ppm) and ammonium carbamate (164.5 ppm). Additionally, ssNMR relaxation measurements reveal three distinct physisorbed CO2 states (solid, liquid, and gas-like) in both aerogels. By systematically tailoring the amine density (i.e., the interchain distance) in chitosan, we elucidate its influence on the CO2 chemisorption speciation. Based on well-established principles of polysaccharide chemistry, we engineered a blended cellulose dialdehyde–chitosan aerogel with reduced amino group density. In this material, only the carbamic acid peak was observed, demonstrating that ammonium carbamate formation requires closely spaced amino groups. These findings highlight the critical role of surface functional groups and amine density in dictating the CO2 adsorption pathways. Our study provides valuable atomic level insights into the structure–function relationships of biopolymer-based sorbents, facilitating their optimized design for CO2 capture technologies.
- 30 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (19) , 12964-12977
Open AccessDeciphering CO2 Adsorption Mechanisms at the Atomic Scale in Cellulose and Chitosan Aerogels
Biopolymer-based aerogels have emerged as promising CO2 adsorbents for large-scale implementation due to their abundance, renewability, and low cost. However, the CO2 capture mechanisms of these materials remain poorly understood. In this study, we exploit the structural similarity between cellulose and chitosan to investigate how surface chemistry governs the CO2 adsorption mechanisms using a combination of solid-state nuclear magnetic resonance (ssNMR) spectroscopy and density functional theory (DFT) modeling. We reveal that cellulose aerogels adsorb CO2 exclusively via physisorption, whereas chitosan aerogels exhibit both physisorption and chemisorption. Chemical shift analysis, supported by DFT calculations, identifies two chemisorbed species in chitosan: carbamic acid (159.0 ppm) and ammonium carbamate (164.5 ppm). Additionally, ssNMR relaxation measurements reveal three distinct physisorbed CO2 states (solid, liquid, and gas-like) in both aerogels. By systematically tailoring the amine density (i.e., the interchain distance) in chitosan, we elucidate its influence on the CO2 chemisorption speciation. Based on well-established principles of polysaccharide chemistry, we engineered a blended cellulose dialdehyde–chitosan aerogel with reduced amino group density. In this material, only the carbamic acid peak was observed, demonstrating that ammonium carbamate formation requires closely spaced amino groups. These findings highlight the critical role of surface functional groups and amine density in dictating the CO2 adsorption pathways. Our study provides valuable atomic level insights into the structure–function relationships of biopolymer-based sorbents, facilitating their optimized design for CO2 capture technologies.
- Open Access
- 7 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (7) , 3302-3310
Enhancing CO2 Capture Via Fast Microwave-Assisted Synthesis of the CALF-20 Metal–Organic Framework
Metal-organic frameworks (MOFs) are promising porous materials for CO2 adsorption due to their high surface area, tunable properties, and selective adsorption capabilities. The recently reported Calgary Framework 20 (CALF-20) MOF has very appealing CO2 capture properties: high uptake capacity; low regeneration energy; durability (>450 000 cycles) under steam and wet acid gases; simple and scalable synthesis. This study investigates the microwave (MW)-assisted synthesis of CALF-20, which reduces reaction time 12-fold while enhancing the synthesis yield to 97%. Structural analysis confirmed that MW-synthesized CALF-20 retains its crystallographic structure and shows improved CO2 capture performance, exhibiting higher adsorption capacity (∼20% higher), selectivity, and lower regeneration energy. This method provides a rapid and efficient alternative for producing the CALF-20 adsorbent for CO2 capture and separation applications.
- 7 February 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (7) , 3302-3310
Open AccessEnhancing CO2 Capture Via Fast Microwave-Assisted Synthesis of the CALF-20 Metal–Organic Framework
Metal-organic frameworks (MOFs) are promising porous materials for CO2 adsorption due to their high surface area, tunable properties, and selective adsorption capabilities. The recently reported Calgary Framework 20 (CALF-20) MOF has very appealing CO2 capture properties: high uptake capacity; low regeneration energy; durability (>450 000 cycles) under steam and wet acid gases; simple and scalable synthesis. This study investigates the microwave (MW)-assisted synthesis of CALF-20, which reduces reaction time 12-fold while enhancing the synthesis yield to 97%. Structural analysis confirmed that MW-synthesized CALF-20 retains its crystallographic structure and shows improved CO2 capture performance, exhibiting higher adsorption capacity (∼20% higher), selectivity, and lower regeneration energy. This method provides a rapid and efficient alternative for producing the CALF-20 adsorbent for CO2 capture and separation applications.
- Open Access
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (16) , 17956-17965
Valorization of Crab Shells as Potential Sorbent Materials for CO2 Capture
This study delves into the potential advantage of utilizing crab shells as sustainable solid adsorbents for CO2 capture, offering an environmentally friendly alternative to conventional porous adsorbents, such as zeolites, silicas, metal–organic frameworks (MOFs), and porous carbons. The investigation focuses on crab shell waste, which exhibits inherent natural porosity and N-bearing groups, making them promising candidates for CO2 physisorption and chemisorption applications. Selective deproteinization and demineralization treatments were used to enhance textural properties while preserving the natural porous structure of the crab shells. The impact of deproteinization and demineralization treatments on CO2 adsorption and speciation at the atomic scale, via solid-state NMR, and correlated findings with textural properties and biomass composition were investigated. The best-performing sample exhibits a surface area of 36 m2/g and a CO2 adsorption capacity of 0.31 mmol/g at 1 bar and 298 K, representing gains of ∼3.5 and 2, respectively, compared to the pristine crab shell. These results underline the potential of fishing industry wastes as a cost-effective, renewable, and eco-friendly source to produce functional porous adsorbents.
- 12 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (16) , 17956-17965
Open AccessValorization of Crab Shells as Potential Sorbent Materials for CO2 Capture
This study delves into the potential advantage of utilizing crab shells as sustainable solid adsorbents for CO2 capture, offering an environmentally friendly alternative to conventional porous adsorbents, such as zeolites, silicas, metal–organic frameworks (MOFs), and porous carbons. The investigation focuses on crab shell waste, which exhibits inherent natural porosity and N-bearing groups, making them promising candidates for CO2 physisorption and chemisorption applications. Selective deproteinization and demineralization treatments were used to enhance textural properties while preserving the natural porous structure of the crab shells. The impact of deproteinization and demineralization treatments on CO2 adsorption and speciation at the atomic scale, via solid-state NMR, and correlated findings with textural properties and biomass composition were investigated. The best-performing sample exhibits a surface area of 36 m2/g and a CO2 adsorption capacity of 0.31 mmol/g at 1 bar and 298 K, representing gains of ∼3.5 and 2, respectively, compared to the pristine crab shell. These results underline the potential of fishing industry wastes as a cost-effective, renewable, and eco-friendly source to produce functional porous adsorbents.
- Open Access
- 28 June 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (27) , 10384-10389
One-Shot Resin 3D-Printed Stators for Low-Cost Fabrication of Magic-Angle Spinning NMR Probeheads
Additive manufacturingsuch as three-dimensional (3D)-printinghas revolutionized the fast and low-cost fabrication of otherwiseexpensive NMR parts. High-resolution solid-state NMR spectroscopydemands rotating the sample at a specific angle (54.74 & DEG;) insidea pneumatic turbine, which must be designed to achieve stable andhigh spinning speeds without mechanical friction. Moreover, instabilityof the sample rotation often leads to crashes, resulting in costlyrepairs. Producing these intricate parts requires traditional machining,which is time-consuming, costly, and relies on specialized labor.Herein, we show that 3D-printing can be used to fabricate the sampleholder housing (stator) in one shot, while the radiofrequency (RF)solenoid was constructed using conventional materials available inelectronics stores. The 3D-printed stator, equipped with a homemadeRF coil, showed remarkable spinning stability, yielding high-qualityNMR data. At a cost below 5 euro, the 3D-printed stator representsa cost reduction of over 99% compared to repaired commercial stators,illustrating the potential of 3D-printing for mass-producing affordablemagic-angle spinning stators.
- 28 June 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (27) , 10384-10389
Open AccessOne-Shot Resin 3D-Printed Stators for Low-Cost Fabrication of Magic-Angle Spinning NMR Probeheads
Additive manufacturingsuch as three-dimensional (3D)-printinghas revolutionized the fast and low-cost fabrication of otherwiseexpensive NMR parts. High-resolution solid-state NMR spectroscopydemands rotating the sample at a specific angle (54.74 & DEG;) insidea pneumatic turbine, which must be designed to achieve stable andhigh spinning speeds without mechanical friction. Moreover, instabilityof the sample rotation often leads to crashes, resulting in costlyrepairs. Producing these intricate parts requires traditional machining,which is time-consuming, costly, and relies on specialized labor.Herein, we show that 3D-printing can be used to fabricate the sampleholder housing (stator) in one shot, while the radiofrequency (RF)solenoid was constructed using conventional materials available inelectronics stores. The 3D-printed stator, equipped with a homemadeRF coil, showed remarkable spinning stability, yielding high-qualityNMR data. At a cost below 5 euro, the 3D-printed stator representsa cost reduction of over 99% compared to repaired commercial stators,illustrating the potential of 3D-printing for mass-producing affordablemagic-angle spinning stators.
- Open Access
- 10 May 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 227, 113341
Engineering phosphatidylinositol-4,5-bisphosphate model membranes enriched in endocytic cargo: A neutron reflectometry, AFM and QCM-D structural study
- 10 May 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 227, 113341
Open AccessEngineering phosphatidylinositol-4,5-bisphosphate model membranes enriched in endocytic cargo: A neutron reflectometry, AFM and QCM-D structural study
- Open Access
Structure of DPPC Monolayers at the Air/Buffer Interface: A Neutron Reflectometry and Ellipsometry Study
Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine, known as DPPC, at the air/water interface are extensively used as model systems of biomembranes and pulmonary surfactant. The properties of these monolayers have been mainly investigated by surface pressure–area isotherms coupled with different complementary techniques such as Brewster angle microscopy, for example. Several attempts using neutron reflectometry (NR) or ellipsometry have also appeared in the literature. Here, we report structural information obtained by using NR and ellipsometry on DPPC monolayers in the liquid condensed phase. On one side, NR can resolve the thickness of the aliphatic tails and the degree of hydration of the polar headgroups. On the other side, ellipsometry gives information on the refractive index and, therefore, on the physical state of the monolayer. The thickness and surface excess obtained by multiple-angle-of-incidence ellipsometry (MAIE) is compared with the results from NR measurements yielding a good agreement. Besides, a novel approach is reported to calculate the optical anisotropy of the DPPC monolayer that depends on the orientation of the aliphatic chains. The results from both NR and ellipsometry are also discussed in the context of the existing results for DPPC monolayers at the air/water interface. The differences observed are rationalized by the presence of buffer molecules interacting with phospholipids.
Open AccessStructure of DPPC Monolayers at the Air/Buffer Interface: A Neutron Reflectometry and Ellipsometry Study
Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine, known as DPPC, at the air/water interface are extensively used as model systems of biomembranes and pulmonary surfactant. The properties of these monolayers have been mainly investigated by surface pressure–area isotherms coupled with different complementary techniques such as Brewster angle microscopy, for example. Several attempts using neutron reflectometry (NR) or ellipsometry have also appeared in the literature. Here, we report structural information obtained by using NR and ellipsometry on DPPC monolayers in the liquid condensed phase. On one side, NR can resolve the thickness of the aliphatic tails and the degree of hydration of the polar headgroups. On the other side, ellipsometry gives information on the refractive index and, therefore, on the physical state of the monolayer. The thickness and surface excess obtained by multiple-angle-of-incidence ellipsometry (MAIE) is compared with the results from NR measurements yielding a good agreement. Besides, a novel approach is reported to calculate the optical anisotropy of the DPPC monolayer that depends on the orientation of the aliphatic chains. The results from both NR and ellipsometry are also discussed in the context of the existing results for DPPC monolayers at the air/water interface. The differences observed are rationalized by the presence of buffer molecules interacting with phospholipids.
- 1 January 1995
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 31 (1) , 144-147
Heterodyne frequency measurements of FIR laser lines around 1.2 and 1.6 THz
We present the frequency measurements of 14 Far-Infrared (FIR) laser lines. We use the heterodyne technique of mixing FIR laser transitions and microwave radiation on a MIM point contact diode to determine the FIR frequencies. The main motivation was to measure the frequency of laser lines of meterological interest, around the 1.6 and 1.2 THz regions. We also present 15 new FIR laser lines we found while performing the frequency measurements, with wavelengths ranging from 90 mum to 819.2 mum. All of them are characterized in wavelength, polarization, intensity, working pressure and absorption offset
- 1 January 1995
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 31 (1) , 144-147
Heterodyne frequency measurements of FIR laser lines around 1.2 and 1.6 THz
We present the frequency measurements of 14 Far-Infrared (FIR) laser lines. We use the heterodyne technique of mixing FIR laser transitions and microwave radiation on a MIM point contact diode to determine the FIR frequencies. The main motivation was to measure the frequency of laser lines of meterological interest, around the 1.6 and 1.2 THz regions. We also present 15 new FIR laser lines we found while performing the frequency measurements, with wavelengths ranging from 90 mum to 819.2 mum. All of them are characterized in wavelength, polarization, intensity, working pressure and absorption offset