Viktoriia Malysheva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Viktoriia Malysheva has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Karyna Danova
O.M. Beketov National University of Urban Economy in Kharkiv
18 shared publications - L. Kolybelnikova
O.M. Beketov National University of Urban Economy in Kharkiv
8 shared publications - Nataliia Popovych
Poltava State Agrarian University
6 shared publications H. Sobolieva
O.M. Beketov National University of Urban Economy in Kharkiv
4 shared publications- Oleg Bogatov
Kharkiv National Automobile and Highway University
4 shared publications - Olha Nikitchenko
O.M. Beketov National University of Urban Economy in Kharkiv
4 shared publications
Latest Publications
- Open Access
- 23 March 2026
- Published by O.M.Beketov National University of Urban Economy in Kharkiv
- Vol. 1 (196) , 297-302
ACCOUNTING FOR THE DUNNING–KRUGER EFFECT IN OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT USING THE SPAR-H METHOD
Human error accounts for more than 70% of industrial incidents, highlighting the critical role of cognitive and behavioral factors in occupational health and safety (OHS). Among these factors, cognitive distortions significantly influence risk perception, decision-making, and compliance with safety procedures. This paper investigates the possibility of integrating the Dunning–Kruger effect—a metacognitive bias characterized by the overestimation of one’s competence by low performers and the underestimation by high performers—into occupational risk assessment procedures using the SPAR-H (Standardized Plant Analysis Risk-Human Reliability) method. The study analyzes contemporary research in occupational psychology, safety management, and human reliability analysis (HRA) to substantiate the relevance of cognitive biases in industrial safety contexts. Particular attention is paid to situations where employees with insufficient competence demonstrate excessive confidence, disregard safety regulations, underestimate hazards, or make inadequate operational decisions. Such manifestations represent hidden systemic risks that are not always captured by traditional competency assessment approaches focused primarily on formal qualifications and compliance indicators. The structural components of the SPAR-H method are examined to determine their potential for incorporating cognitive distortion parameters. It is demonstrated that Performance Shaping Factors (PSFs), particularly PSF4 (experience and training) and PSF7 (fitness for duty, including psychological condition), provide a methodological basis for reflecting manifestations of overconfidence within the Human Error Probability (HEP) calculation. However, SPAR-H does not contain explicit indicators for measuring overconfidence or metacognitive inaccuracy. Therefore, the paper proposes supplementing PSF7 evaluation procedures with quantitative discrepancy measures comparing self- assessment and objectively measured competence (gap tests), as well as structured behavioral diagnostics. The results indicate that integrating cognitive bias assessment into SPAR-H enhances the sensitivity and realism of risk evaluation models, especially in high-risk sectors such as energy, construction, and transport. Accounting for the Dunning–Kruger effect contributes to more accurate estimation of operator reliability, supports evidence-based safety management decisions, and strengthens preventive strategies aimed at reducing accident probability. It is concluded that systematic consideration of metacognitive distortions within HRA frameworks represents a promising direction for improving occupational risk management methodologies and increasing the overall effectiveness of OHS management systems.
- 23 March 2026
- Published by O.M.Beketov National University of Urban Economy in Kharkiv
- Vol. 1 (196) , 297-302
Open AccessACCOUNTING FOR THE DUNNING–KRUGER EFFECT IN OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT USING THE SPAR-H METHOD
Human error accounts for more than 70% of industrial incidents, highlighting the critical role of cognitive and behavioral factors in occupational health and safety (OHS). Among these factors, cognitive distortions significantly influence risk perception, decision-making, and compliance with safety procedures. This paper investigates the possibility of integrating the Dunning–Kruger effect—a metacognitive bias characterized by the overestimation of one’s competence by low performers and the underestimation by high performers—into occupational risk assessment procedures using the SPAR-H (Standardized Plant Analysis Risk-Human Reliability) method. The study analyzes contemporary research in occupational psychology, safety management, and human reliability analysis (HRA) to substantiate the relevance of cognitive biases in industrial safety contexts. Particular attention is paid to situations where employees with insufficient competence demonstrate excessive confidence, disregard safety regulations, underestimate hazards, or make inadequate operational decisions. Such manifestations represent hidden systemic risks that are not always captured by traditional competency assessment approaches focused primarily on formal qualifications and compliance indicators. The structural components of the SPAR-H method are examined to determine their potential for incorporating cognitive distortion parameters. It is demonstrated that Performance Shaping Factors (PSFs), particularly PSF4 (experience and training) and PSF7 (fitness for duty, including psychological condition), provide a methodological basis for reflecting manifestations of overconfidence within the Human Error Probability (HEP) calculation. However, SPAR-H does not contain explicit indicators for measuring overconfidence or metacognitive inaccuracy. Therefore, the paper proposes supplementing PSF7 evaluation procedures with quantitative discrepancy measures comparing self- assessment and objectively measured competence (gap tests), as well as structured behavioral diagnostics. The results indicate that integrating cognitive bias assessment into SPAR-H enhances the sensitivity and realism of risk evaluation models, especially in high-risk sectors such as energy, construction, and transport. Accounting for the Dunning–Kruger effect contributes to more accurate estimation of operator reliability, supports evidence-based safety management decisions, and strengthens preventive strategies aimed at reducing accident probability. It is concluded that systematic consideration of metacognitive distortions within HRA frameworks represents a promising direction for improving occupational risk management methodologies and increasing the overall effectiveness of OHS management systems.
- Open Access
- 28 February 2026
- Published by Ukrainian Scientific Community in Journal of Scientific Papers "Social development and Security"
- Vol. 16 (1) , 255-263
Правові та соціально-економічні механізми державного управління безпекою працівників з інвалідністю в контексті міжнародної інтеграції
Мета роботи. Наукове обґрунтування та розроблення інтегрованої моделі оцінювання ефективності правових і соціально-економічних механізмів державного управління охороною праці працівників з інвалідністю з урахуванням міжнародних підходів, вимог цивільної безпеки, готовності до надзвичайних ситуацій і організації домедичної допомоги. Метод дослідження. Системний підхід, методи аналізу та узагальнення наукових джерел, порівняльний аналіз міжнародного досвіду, індикаторний підхід та метод інтегрального оцінювання ефективності державної політики. Результати дослідження. Обґрунтовано необхідність інтеграції правових, соціально-економічних, інституційних і організаційних механізмів реагування в єдину систему державного управління. Запропоновано інтегровану модель оцінювання ефективності, що включає чотири функціональні блоки: правовий, соціально-економічний, інституційний та блок реагування і домедичної допомоги. Розроблено систему індикаторів, методику формування інтегрального показника та шкалу його інтерпретації, що забезпечує можливість кількісної оцінки ефективності державної політики, порівняльного аналізу регіонів і галузей та визначення пріоритетів фінансування заходів інклюзивної безпеки. Теоретична цінність дослідження. Розвиток теоретичних підходів до державного управління охороною праці шляхом обґрунтування концепції інтеграції інклюзивності, реагування на надзвичайні ситуації та домедичної допомоги в єдину систему оцінювання ефективності. Запропонована модель розширює наукові уявлення про системну оцінку результативності державної політики у сфері безпеки праці. Практична цінність дослідження. Запропонований підхід може бути використаний для стратегічного моніторингу ефективності державного управління, удосконалення нормативно-правової бази, підвищення інституційної спроможності органів державного нагляду, обґрунтування інвестицій у заходи безпеки та формування інклюзивного трудового середовища. Цінність дослідження. Створено комплексну модель оцінювання ефективності державної політики, яка вперше системно поєднує правові, соціально-економічні, інституційні та операційні механізми реагування та розглядає домедичну допомогу як структурний компонент державного управління. Обмеження дослідження. Обмеження пов’язані з концептуальним характером моделі, необхідністю її апробації на емпіричних даних різних регіонів і галузей, а також уточнення вагових коефіцієнтів індикаторів у процесі практичного застосування. Тип статті. Емпірична.
- 28 February 2026
- Published by Ukrainian Scientific Community in Journal of Scientific Papers "Social development and Security"
- Vol. 16 (1) , 255-263
Open AccessПравові та соціально-економічні механізми державного управління безпекою працівників з інвалідністю в контексті міжнародної інтеграції
Мета роботи. Наукове обґрунтування та розроблення інтегрованої моделі оцінювання ефективності правових і соціально-економічних механізмів державного управління охороною праці працівників з інвалідністю з урахуванням міжнародних підходів, вимог цивільної безпеки, готовності до надзвичайних ситуацій і організації домедичної допомоги. Метод дослідження. Системний підхід, методи аналізу та узагальнення наукових джерел, порівняльний аналіз міжнародного досвіду, індикаторний підхід та метод інтегрального оцінювання ефективності державної політики. Результати дослідження. Обґрунтовано необхідність інтеграції правових, соціально-економічних, інституційних і організаційних механізмів реагування в єдину систему державного управління. Запропоновано інтегровану модель оцінювання ефективності, що включає чотири функціональні блоки: правовий, соціально-економічний, інституційний та блок реагування і домедичної допомоги. Розроблено систему індикаторів, методику формування інтегрального показника та шкалу його інтерпретації, що забезпечує можливість кількісної оцінки ефективності державної політики, порівняльного аналізу регіонів і галузей та визначення пріоритетів фінансування заходів інклюзивної безпеки. Теоретична цінність дослідження. Розвиток теоретичних підходів до державного управління охороною праці шляхом обґрунтування концепції інтеграції інклюзивності, реагування на надзвичайні ситуації та домедичної допомоги в єдину систему оцінювання ефективності. Запропонована модель розширює наукові уявлення про системну оцінку результативності державної політики у сфері безпеки праці. Практична цінність дослідження. Запропонований підхід може бути використаний для стратегічного моніторингу ефективності державного управління, удосконалення нормативно-правової бази, підвищення інституційної спроможності органів державного нагляду, обґрунтування інвестицій у заходи безпеки та формування інклюзивного трудового середовища. Цінність дослідження. Створено комплексну модель оцінювання ефективності державної політики, яка вперше системно поєднує правові, соціально-економічні, інституційні та операційні механізми реагування та розглядає домедичну допомогу як структурний компонент державного управління. Обмеження дослідження. Обмеження пов’язані з концептуальним характером моделі, необхідністю її апробації на емпіричних даних різних регіонів і галузей, а також уточнення вагових коефіцієнтів індикаторів у процесі практичного застосування. Тип статті. Емпірична.
- Open Access
- 26 December 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 214,p. 57-63
IMPROVEMENT OF THE ULTRASOUND PULSE METHOD IN THE RESEARCH OF CONCRETE IN CONSTRUCTION FACILITIES DAMAGED BY MILITARY ACTIONS TO ENSURE THEIR OPERATIONAL TECHNOLOGICAL SAFETY
During the war, more than 160,000 buildings were damaged as a result of military operations in Ukraine, including 125 railway stations. This determines the importance of the task of restoring damaged construction sites. The primary important stage of restoration work is the inspection of such sites. At the same time, the necessary volume of work is established, as well as capital costs for its restoration. In most such sites, reinforced concrete structures are important components, the reliability of the structure as a whole depends on the condition of the concrete. Therefore, the quality of restoration, economic costs for restoration also depend on the accuracy and reliability of the results of the concrete inspection. In Ukraine, a methodological basis has been developed for the System for Ensuring the Reliability and Safety of Construction Sites. According to the provisions of the System, suitability, in our case, for restoration work is established through compliance with the technical condition of the structures. The conditions of compliance are also determined by regulatory documents. For the examination and study of the characteristics of concrete in structures, the ultrasonic pulse method is determined, along with others. The main advantages of this method are: the possibility of studying the characteristics of concrete in almost any part of the structure, the necessary accuracy and reliability of the measurement results. The main disadvantage of devices that implement this method is the impossibility of conducting measurements in the case of operating construction machines, during the operation of which elastic vibrations are excited in the concrete under study. This is due to the fact that by their physical nature such extraneous vibrations are similar to ultrasonic ones. As a result of superimposing extraneous vibrations on ultrasonic ones, both the reliability and accuracy of the measurement results may decrease. Based on the need to adhere to the schedule of restoration work carried out under the current state of war, it is undesirable to stop them for the duration of the study of concrete. Existing ultrasonic measuring devices produced both in Ukraine and in foreign countries do not have protection against extraneous elastic vibrations. In order to ensure the conduct of concrete research using the ultrasonic method in conditions of operating construction equipment, an improved device has been developed that is free from such a drawback.
- 26 December 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 214,p. 57-63
Open AccessIMPROVEMENT OF THE ULTRASOUND PULSE METHOD IN THE RESEARCH OF CONCRETE IN CONSTRUCTION FACILITIES DAMAGED BY MILITARY ACTIONS TO ENSURE THEIR OPERATIONAL TECHNOLOGICAL SAFETY
During the war, more than 160,000 buildings were damaged as a result of military operations in Ukraine, including 125 railway stations. This determines the importance of the task of restoring damaged construction sites. The primary important stage of restoration work is the inspection of such sites. At the same time, the necessary volume of work is established, as well as capital costs for its restoration. In most such sites, reinforced concrete structures are important components, the reliability of the structure as a whole depends on the condition of the concrete. Therefore, the quality of restoration, economic costs for restoration also depend on the accuracy and reliability of the results of the concrete inspection. In Ukraine, a methodological basis has been developed for the System for Ensuring the Reliability and Safety of Construction Sites. According to the provisions of the System, suitability, in our case, for restoration work is established through compliance with the technical condition of the structures. The conditions of compliance are also determined by regulatory documents. For the examination and study of the characteristics of concrete in structures, the ultrasonic pulse method is determined, along with others. The main advantages of this method are: the possibility of studying the characteristics of concrete in almost any part of the structure, the necessary accuracy and reliability of the measurement results. The main disadvantage of devices that implement this method is the impossibility of conducting measurements in the case of operating construction machines, during the operation of which elastic vibrations are excited in the concrete under study. This is due to the fact that by their physical nature such extraneous vibrations are similar to ultrasonic ones. As a result of superimposing extraneous vibrations on ultrasonic ones, both the reliability and accuracy of the measurement results may decrease. Based on the need to adhere to the schedule of restoration work carried out under the current state of war, it is undesirable to stop them for the duration of the study of concrete. Existing ultrasonic measuring devices produced both in Ukraine and in foreign countries do not have protection against extraneous elastic vibrations. In order to ensure the conduct of concrete research using the ultrasonic method in conditions of operating construction equipment, an improved device has been developed that is free from such a drawback.
- Open Access
- 19 September 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 4 (192) , 381-385
ANALYSIS OF PERSONNEL BEHAVIORAL CHARACTERISTICS IN THE CONTEXT OF ASSESSING EVACUATION EFFICIENCY
In today's environment, with climate change, an increase in natural disasters, as well as man-made hazards and increased military threats, the issue of ensuring the safety of workers during emergencies has become particularly urgent. This requires the implementation of evacuation strategies that are not only technically reliable, but also adapted to real conditions and sensitive to the human factor. Recent studies demonstrate a wide range of modern approaches to assessing the effectiveness of evacuation. Enterprises and organizations use computer modeling, real evacuation training and digital tracking technologies (RFID, UWB). However, such methods are often based on averaged or normative behavioral assumptions, without taking into account individual psychological reactions, social dynamics and decision-making in stressful situations. Along with technical modeling, the importance of behavioral analysis and "soft data" is growing. “Soft data” refers to qualitative and subjective information, including observations, interviews, surveys, video recordings, and AI-based behavioral analytics. Incorporating such data allows researchers to capture real-world responses to critical situations, identify hidden risks, and better explain delays, panic, or deviations from established evacuation routes. This study emphasizes the integration of quantitative parameters (time, distance, flow density) with qualitative indicators (stress level, leadership, compliance, group behavior) into a combined integral indicator of evacuation effectiveness. Such an integrative approach allows for a more holistic assessment of safety and provides opportunities for adaptive planning. The study results emphasize that taking into account behavioral characteristics significantly increases the realism and applicability of evacuation scenarios. The proposed methodology can help in designing safer buildings, improve personnel training, and improve decision-making algorithms in emergency management systems. Thus, the research results contribute not only to the academic discourse, but also to the practical improvement of occupational safety and emergency preparedness.
- 19 September 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 4 (192) , 381-385
Open AccessANALYSIS OF PERSONNEL BEHAVIORAL CHARACTERISTICS IN THE CONTEXT OF ASSESSING EVACUATION EFFICIENCY
In today's environment, with climate change, an increase in natural disasters, as well as man-made hazards and increased military threats, the issue of ensuring the safety of workers during emergencies has become particularly urgent. This requires the implementation of evacuation strategies that are not only technically reliable, but also adapted to real conditions and sensitive to the human factor. Recent studies demonstrate a wide range of modern approaches to assessing the effectiveness of evacuation. Enterprises and organizations use computer modeling, real evacuation training and digital tracking technologies (RFID, UWB). However, such methods are often based on averaged or normative behavioral assumptions, without taking into account individual psychological reactions, social dynamics and decision-making in stressful situations. Along with technical modeling, the importance of behavioral analysis and "soft data" is growing. “Soft data” refers to qualitative and subjective information, including observations, interviews, surveys, video recordings, and AI-based behavioral analytics. Incorporating such data allows researchers to capture real-world responses to critical situations, identify hidden risks, and better explain delays, panic, or deviations from established evacuation routes. This study emphasizes the integration of quantitative parameters (time, distance, flow density) with qualitative indicators (stress level, leadership, compliance, group behavior) into a combined integral indicator of evacuation effectiveness. Such an integrative approach allows for a more holistic assessment of safety and provides opportunities for adaptive planning. The study results emphasize that taking into account behavioral characteristics significantly increases the realism and applicability of evacuation scenarios. The proposed methodology can help in designing safer buildings, improve personnel training, and improve decision-making algorithms in emergency management systems. Thus, the research results contribute not only to the academic discourse, but also to the practical improvement of occupational safety and emergency preparedness.
- Open Access
- 4 July 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 3 (191) , 586-590
ANALYSIS OF INPUT PARAMETERS FOR MODELING THE MOVEMENT OF PERSONS WITH DISABILITIES IN THE CONTEXT OF ENSURING PERSONNEL SAFETY
Involving people with disabilities in the labor market is not only ethical, but also economically justified way to solve the problem of human resource shortage. At the same time, providing workplaces to people with disabilities is associated with increased risks in the context of the safety of employees on the territory of the enterprise both in normal conditions and in the event of an emergency. That is why a special inclusive working environment should be created for representatives of vulnerable groups of employees, which takes into account their special needs. Given the fact that there are many possible combinations of limitations in the life activities of people with disabilities, it is advisable to use agent-oriented modeling to study these features. This approach allows to realistically model the actions of employees with disabilities, taking into account their individual characteristics (speed, reaction, need for assistance, etc.) and interaction with elements of the production environment (obstacles, width of aisles, evacuation routes, etc.). It is advisable to consider the problem of modeling the movement of people with disabilities in two directions: the movement of people with disabilities in the process of performing work tasks in order to analyze the efficiency, convenience and safety of routes in the workplace, identify delays, overloading of passages; and movement for evacuation in the event of an emergency in order to identify critical areas and the risk of blockage. In both cases, it is important to assess the risks, on the basis of which measures to increase the safety level will be developed in the future. The article analyzes the input parameters for agent-oriented modeling of the movement of people with disabilities in the conditions of the production environment during the normal operation of the enterprise and in the event of an emergency in order to develop measures to increase the safety level of personnel with disabilities in production. It is proposed to divide the parameters into two groups: parameters that characterize the features of a person's disability (agent parameters) and environmental parameters that affect the ability of a disabled employee to move around production premises and affect the effectiveness of his activities under the conditions of the normal operation of the enterprise and in the event of an emergency. For the selected parameters, formulas for risk assessment are proposed, which will allow forming an information base for further making management decisions to increase the safety level of employees with disabilities.
- 4 July 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 3 (191) , 586-590
Open AccessANALYSIS OF INPUT PARAMETERS FOR MODELING THE MOVEMENT OF PERSONS WITH DISABILITIES IN THE CONTEXT OF ENSURING PERSONNEL SAFETY
Involving people with disabilities in the labor market is not only ethical, but also economically justified way to solve the problem of human resource shortage. At the same time, providing workplaces to people with disabilities is associated with increased risks in the context of the safety of employees on the territory of the enterprise both in normal conditions and in the event of an emergency. That is why a special inclusive working environment should be created for representatives of vulnerable groups of employees, which takes into account their special needs. Given the fact that there are many possible combinations of limitations in the life activities of people with disabilities, it is advisable to use agent-oriented modeling to study these features. This approach allows to realistically model the actions of employees with disabilities, taking into account their individual characteristics (speed, reaction, need for assistance, etc.) and interaction with elements of the production environment (obstacles, width of aisles, evacuation routes, etc.). It is advisable to consider the problem of modeling the movement of people with disabilities in two directions: the movement of people with disabilities in the process of performing work tasks in order to analyze the efficiency, convenience and safety of routes in the workplace, identify delays, overloading of passages; and movement for evacuation in the event of an emergency in order to identify critical areas and the risk of blockage. In both cases, it is important to assess the risks, on the basis of which measures to increase the safety level will be developed in the future. The article analyzes the input parameters for agent-oriented modeling of the movement of people with disabilities in the conditions of the production environment during the normal operation of the enterprise and in the event of an emergency in order to develop measures to increase the safety level of personnel with disabilities in production. It is proposed to divide the parameters into two groups: parameters that characterize the features of a person's disability (agent parameters) and environmental parameters that affect the ability of a disabled employee to move around production premises and affect the effectiveness of his activities under the conditions of the normal operation of the enterprise and in the event of an emergency. For the selected parameters, formulas for risk assessment are proposed, which will allow forming an information base for further making management decisions to increase the safety level of employees with disabilities.
- Open Access
- 2 April 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (189) , 441-446
APPLICATION OF SWOT ANALYSIS IN FORMING A STAFF MENTAL HEALTH MANAGEMENT SYSTEM
In today's realities, there is a steady trend towards an increase of psycho-emotional tension among the population: the pandemic, and then the war in Ukraine, created a constant sense of danger and instability, which negatively affects people's mental health and has a negative socio-economic impact. Mental health is a concept that emphasizes the importance of mental and emotional well-being in the context of ensuring overall safety both at the individual level and within a particular organization and society as a whole. Psychosocial risks in the production environment conditions can lead to professional burnout, a decrease in the level of professional performance, which is a consequence of working in conditions of high stress, significant emotional or mental stress and other factors. Mental health, in turn, significantly affects the behavior of employees, their ability to effectively perform tasks, as well as the ability to make decisions to ensure their own safety and the safety of others. The purpose of the article is to analyze the possibilities of SWOT analysis for developing or improving a personnel mental health management system based on the formulation of a set of qualitative and quantitative indicators. Based on the analysis of factors that affect the psycho-emotional state of employees, as well as the possibilities of SWOT analysis for studying issues of health care and personnel support, the use of key performance indicators (KPI) is proposed, which allows not only qualitatively, but also quantitatively assess the effectiveness and efficiency of the personnel mental health management system. Performance indicators are assigned to each of the SWOT analysis categories: strengths, weaknesses, opportunities, threats. Examples of setting goals and methods for measuring the degree of their achievement that can be used are also given. To form a personnel mental health management system, the company must develop its own KPI regulations, which will indicate the goals of implementing KPIs, to whom they apply; a list of KPIs with a precise description and calculation methods; KPI measurement methods; responsible persons; frequency of research; mechanisms for adjusting indicators. This approach allows the company to create an effective strategy to improve the mental health of employees, which has a positive impact on safety in the workplace.
- 2 April 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (189) , 441-446
Open AccessAPPLICATION OF SWOT ANALYSIS IN FORMING A STAFF MENTAL HEALTH MANAGEMENT SYSTEM
In today's realities, there is a steady trend towards an increase of psycho-emotional tension among the population: the pandemic, and then the war in Ukraine, created a constant sense of danger and instability, which negatively affects people's mental health and has a negative socio-economic impact. Mental health is a concept that emphasizes the importance of mental and emotional well-being in the context of ensuring overall safety both at the individual level and within a particular organization and society as a whole. Psychosocial risks in the production environment conditions can lead to professional burnout, a decrease in the level of professional performance, which is a consequence of working in conditions of high stress, significant emotional or mental stress and other factors. Mental health, in turn, significantly affects the behavior of employees, their ability to effectively perform tasks, as well as the ability to make decisions to ensure their own safety and the safety of others. The purpose of the article is to analyze the possibilities of SWOT analysis for developing or improving a personnel mental health management system based on the formulation of a set of qualitative and quantitative indicators. Based on the analysis of factors that affect the psycho-emotional state of employees, as well as the possibilities of SWOT analysis for studying issues of health care and personnel support, the use of key performance indicators (KPI) is proposed, which allows not only qualitatively, but also quantitatively assess the effectiveness and efficiency of the personnel mental health management system. Performance indicators are assigned to each of the SWOT analysis categories: strengths, weaknesses, opportunities, threats. Examples of setting goals and methods for measuring the degree of their achievement that can be used are also given. To form a personnel mental health management system, the company must develop its own KPI regulations, which will indicate the goals of implementing KPIs, to whom they apply; a list of KPIs with a precise description and calculation methods; KPI measurement methods; responsible persons; frequency of research; mechanisms for adjusting indicators. This approach allows the company to create an effective strategy to improve the mental health of employees, which has a positive impact on safety in the workplace.
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 29-36
A mechanized assembly for erecting soil-cement barriers to protect agricultural lands from low-active waste during flood
The object of this study is the process of constructing a waterproof underground barrier from local soil using loess loam and medium-sized sand as an example. The values of waterproofing of soil cements on different types of soil and the norms of net labor consumption corresponding to them were obtained. The research solves the task of protecting agricultural lands in the areas of geological burials of low-level radioactive waste. Configuration of a mechanized drilling mixing assembly for installing a waterproof barrier in the field has been proposed. Waterproofness of soil cement on clay and sandy soils was determined experimentally. The corresponding norms of the net consumption of time for manufacturing the barrier in these soils have been determined. Units of the mechanized assembly are repairable, utilize widely available materials, parts, and mechanisms. As a result of studies on the labor intensity of the installation of soil cement, a net labor rate was established, which varies from 35 to 52 min/m3 depending on the type of soil. The corresponding values of waterproofness, which ranged from W6 to W14, were determined, which substantiates the possibility of effective functioning of soil-cement underground barriers. Options for the structural solution for impenetrable barriers have been offered. The values of the obtained net time rates are explained by the high degree of mechanization of the technological process and the use of local materials. A distinctive feature of the results is the emphasis on the data collection on the time consumption of machines and mechanisms, the characteristics of local soils under production conditions, and the use of local materials. The assembly implies using affordable and repairable units that can be serviced right in the field. Given this, the manufacturability of the proposed process was defined, confirmed by time-keeping studies. The realm of practical application of the reported results are sites within flat areas with sandy or loess bases. Barrier solutions are designed exclusively for geological waste storage facilities under the conditions of a high level of groundwater and the presence of a waterproof layer at the base
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 29-36
Open AccessA mechanized assembly for erecting soil-cement barriers to protect agricultural lands from low-active waste during flood
The object of this study is the process of constructing a waterproof underground barrier from local soil using loess loam and medium-sized sand as an example. The values of waterproofing of soil cements on different types of soil and the norms of net labor consumption corresponding to them were obtained. The research solves the task of protecting agricultural lands in the areas of geological burials of low-level radioactive waste. Configuration of a mechanized drilling mixing assembly for installing a waterproof barrier in the field has been proposed. Waterproofness of soil cement on clay and sandy soils was determined experimentally. The corresponding norms of the net consumption of time for manufacturing the barrier in these soils have been determined. Units of the mechanized assembly are repairable, utilize widely available materials, parts, and mechanisms. As a result of studies on the labor intensity of the installation of soil cement, a net labor rate was established, which varies from 35 to 52 min/m3 depending on the type of soil. The corresponding values of waterproofness, which ranged from W6 to W14, were determined, which substantiates the possibility of effective functioning of soil-cement underground barriers. Options for the structural solution for impenetrable barriers have been offered. The values of the obtained net time rates are explained by the high degree of mechanization of the technological process and the use of local materials. A distinctive feature of the results is the emphasis on the data collection on the time consumption of machines and mechanisms, the characteristics of local soils under production conditions, and the use of local materials. The assembly implies using affordable and repairable units that can be serviced right in the field. Given this, the manufacturability of the proposed process was defined, confirmed by time-keeping studies. The realm of practical application of the reported results are sites within flat areas with sandy or loess bases. Barrier solutions are designed exclusively for geological waste storage facilities under the conditions of a high level of groundwater and the presence of a waterproof layer at the base
- Open Access
- 7 June 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 3 (184) , 204–208
MANAGEMENT DECISION-MAKING ON THE EMPLOYMENT OF A PERSON WITH A DISABILITY, CONSIDERING OCCUPATIONAL SAFETY ISSUES
The total number of people with disabilities in the world tends to grow, so the problem of ensuring the employment of this category of workers is relevant for any country in the world. In Ukraine, before the war, the number of people with disabilities was more than 2.7 million. Since the beginning of the military aggression of the Russian Federation against Ukraine, the number of people with disabilities has been increasing every day, which leads to complications in the socio-economic situation in the country and requires the implementation of urgent measures aimed at raising the effectiveness of social, in particular, labour integration of this population category. Despite the advantages for the development of the company, the employment of persons with disabilities in real-life workplaces involves difficulties caused by the need to take into account individual needs and implement measures for reasonable adaptation in the workplace. Considering this, an employer has to understand how employing persons with disabilities will affect the company. When making this decision, the issue of ensuring the safety of work for this category of employees is also essential. The article examines the approach to creating an information base for forming an employer’s management decision regarding the employment of a person with a disability using the desirability function of E. Harrington. Technical, economic, legal, and other factors can be decision-making criteria. The article proposes to use such criteria as the necessary volume of adaptation measures regarding the workplace of an employee with a disability, the level of performance of production tasks, and the level of safety of work performance. As a result, the equation of the desirability functions of the individual criteria under consideration was obtained, according to which it is possible to derive a generalised desirability function, enabling the employer to make reasonable decisions regarding the possibility of providing a workplace for a person with a disability. The study’s results will help improve the efficiency of employment of people with disabilities. Keywords: disability, workplace, labour process, decision, safety.
- 7 June 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 3 (184) , 204–208
Open AccessMANAGEMENT DECISION-MAKING ON THE EMPLOYMENT OF A PERSON WITH A DISABILITY, CONSIDERING OCCUPATIONAL SAFETY ISSUES
The total number of people with disabilities in the world tends to grow, so the problem of ensuring the employment of this category of workers is relevant for any country in the world. In Ukraine, before the war, the number of people with disabilities was more than 2.7 million. Since the beginning of the military aggression of the Russian Federation against Ukraine, the number of people with disabilities has been increasing every day, which leads to complications in the socio-economic situation in the country and requires the implementation of urgent measures aimed at raising the effectiveness of social, in particular, labour integration of this population category. Despite the advantages for the development of the company, the employment of persons with disabilities in real-life workplaces involves difficulties caused by the need to take into account individual needs and implement measures for reasonable adaptation in the workplace. Considering this, an employer has to understand how employing persons with disabilities will affect the company. When making this decision, the issue of ensuring the safety of work for this category of employees is also essential. The article examines the approach to creating an information base for forming an employer’s management decision regarding the employment of a person with a disability using the desirability function of E. Harrington. Technical, economic, legal, and other factors can be decision-making criteria. The article proposes to use such criteria as the necessary volume of adaptation measures regarding the workplace of an employee with a disability, the level of performance of production tasks, and the level of safety of work performance. As a result, the equation of the desirability functions of the individual criteria under consideration was obtained, according to which it is possible to derive a generalised desirability function, enabling the employer to make reasonable decisions regarding the possibility of providing a workplace for a person with a disability. The study’s results will help improve the efficiency of employment of people with disabilities. Keywords: disability, workplace, labour process, decision, safety.
- Open Access
- 5 April 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (182) , 210–214
A METHODOLOGY FOR ASSESSING THE RISK OF INJURY AT THE WORKPLACE OF EMPLOYEES WITH DISABILITIES
The modern approach to ensuring the occupational safety of workers in Ukraine should rely on a risk-oriented approach. Essential requirements for risk assessment methods are a sufficient level of informativeness, reliability of results, and the ability to adapt them to the conditions in which the methods will apply. In particular, it concerns the assessment of injury risks at workplaces of representatives of vulnerable groups of workers—primarily elderly workers and workers with disabilities. Difficulties in assessing workplace injury risks for vulnerable groups of workers limit the development of occupational inclusion at a time when promoting the employment of people with disabilities has become a key priority for governments around the world. The article aims to develop a methodology for assessing risks at the workplaces of employees with disabilities one can use to evaluate the level of risk at enterprises, particularly in small and medium-sized businesses. When determining the injury risks to employees of vulnerable groups, one should account for both the individual characteristics of the employee and the characteristics of the workplace and work process. The input information is the conclusions of the medical experts regarding the types and degrees of impact of life restrictions, as well as the value of individual risk according to the company’s field of activity. The analysis of the workplace, planned for the employment of a person with a disability, of the technological process, and the surrounding working environment follows the factors the company forms based on their internal and external context. Comparing the result with the limit value of the risk is necessary to decide on the possibility of performing work tasks by the employee and the need to take additional safety measures. When choosing a risk threshold against which to compare the assessment result, the company must consider its goals for achieving the required level of safety. Thus, this technique allows one to carry out a comprehensive assessment of the level of risk at the disabled employee’s workplace, which will contribute to increasing the level of occupational safety and professional integration of persons with disabilities. Keywords: risk, disability, workplace, labour process, injuries.
- 5 April 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (182) , 210–214
Open AccessA METHODOLOGY FOR ASSESSING THE RISK OF INJURY AT THE WORKPLACE OF EMPLOYEES WITH DISABILITIES
The modern approach to ensuring the occupational safety of workers in Ukraine should rely on a risk-oriented approach. Essential requirements for risk assessment methods are a sufficient level of informativeness, reliability of results, and the ability to adapt them to the conditions in which the methods will apply. In particular, it concerns the assessment of injury risks at workplaces of representatives of vulnerable groups of workers—primarily elderly workers and workers with disabilities. Difficulties in assessing workplace injury risks for vulnerable groups of workers limit the development of occupational inclusion at a time when promoting the employment of people with disabilities has become a key priority for governments around the world. The article aims to develop a methodology for assessing risks at the workplaces of employees with disabilities one can use to evaluate the level of risk at enterprises, particularly in small and medium-sized businesses. When determining the injury risks to employees of vulnerable groups, one should account for both the individual characteristics of the employee and the characteristics of the workplace and work process. The input information is the conclusions of the medical experts regarding the types and degrees of impact of life restrictions, as well as the value of individual risk according to the company’s field of activity. The analysis of the workplace, planned for the employment of a person with a disability, of the technological process, and the surrounding working environment follows the factors the company forms based on their internal and external context. Comparing the result with the limit value of the risk is necessary to decide on the possibility of performing work tasks by the employee and the need to take additional safety measures. When choosing a risk threshold against which to compare the assessment result, the company must consider its goals for achieving the required level of safety. Thus, this technique allows one to carry out a comprehensive assessment of the level of risk at the disabled employee’s workplace, which will contribute to increasing the level of occupational safety and professional integration of persons with disabilities. Keywords: risk, disability, workplace, labour process, injuries.
- 4 December 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (180) , 202–206
THE PDCA CYCLE IN THE CONTEXT OF REDUCING PSYCHO-EMOTIONAL TENSION IN THE WORKPLACE
The necessity to ensure work safety begins with an understanding of the risks that exist in the enterprise and can lead to injury, deterioration of the health of employees, and accidents. Such risks may include physical, chemical, biological, and psychosocial hazards. The negative consequences of the psycho-emotional tension of employees consist of a decrease in the level of concentration of attention, increased fatigue, deterioration in the perception and memorisation of information, and a decrease in work efficiency. Some serious consequences of the excessive psycho-emotional tension of the employee are an increasing risk of accidents during the performance of work tasks, an increased time absence at work due to illness, a decrease in the quality of the work performed, loss of motivation, and others. The article analyses the possibilities of using the PDCA Cycle methodology to eliminate psycho-emotional tension in the workplace. We revealed the dangerous psycho-emotional factors in the workplace and provided examples of using each stage of the PDCA Cycle to reduce their impact on employees and ensure safe indicators of working conditions. The PDCA cycle can be implemented as a mean of improving the management and normalisation of safe work conditions, using the main idea of the model—the continuous improvement of safety indicators, through a step-by-step cycle: planning, execution, inspection, and action. The Deming circle allows us to systematically identify, analyse and solve problems related to psycho-emotional tension in the workplace, as well as to constantly improve processes in order to prevent the emergence of new stress factors. The application of this approach will provide effective control over psycho-emotional risks, reduce their impact on the health and safety of employees, improve overall production productivity, and is also a valuable tool for evaluating the effectiveness of the safety management system at the enterprise and for making decisions on improving working conditions. Keywords: the PDCA Cycle, psycho-emotional tension, work conditions, planning, implementing, improvement.
- 4 December 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (180) , 202–206
THE PDCA CYCLE IN THE CONTEXT OF REDUCING PSYCHO-EMOTIONAL TENSION IN THE WORKPLACE
The necessity to ensure work safety begins with an understanding of the risks that exist in the enterprise and can lead to injury, deterioration of the health of employees, and accidents. Such risks may include physical, chemical, biological, and psychosocial hazards. The negative consequences of the psycho-emotional tension of employees consist of a decrease in the level of concentration of attention, increased fatigue, deterioration in the perception and memorisation of information, and a decrease in work efficiency. Some serious consequences of the excessive psycho-emotional tension of the employee are an increasing risk of accidents during the performance of work tasks, an increased time absence at work due to illness, a decrease in the quality of the work performed, loss of motivation, and others. The article analyses the possibilities of using the PDCA Cycle methodology to eliminate psycho-emotional tension in the workplace. We revealed the dangerous psycho-emotional factors in the workplace and provided examples of using each stage of the PDCA Cycle to reduce their impact on employees and ensure safe indicators of working conditions. The PDCA cycle can be implemented as a mean of improving the management and normalisation of safe work conditions, using the main idea of the model—the continuous improvement of safety indicators, through a step-by-step cycle: planning, execution, inspection, and action. The Deming circle allows us to systematically identify, analyse and solve problems related to psycho-emotional tension in the workplace, as well as to constantly improve processes in order to prevent the emergence of new stress factors. The application of this approach will provide effective control over psycho-emotional risks, reduce their impact on the health and safety of employees, improve overall production productivity, and is also a valuable tool for evaluating the effectiveness of the safety management system at the enterprise and for making decisions on improving working conditions. Keywords: the PDCA Cycle, psycho-emotional tension, work conditions, planning, implementing, improvement.