Sebastian Prepeliţă
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sebastian Prepeliţă has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Javier Gómez Bolaños
Department of Signal Processing and Acoustics, Aalto University 2 , P.O. Box 13000, FI-00076 Aalto Espoo, Finland
3 shared publications- Julie Meyer
Department of Engineering, King's College London 1 , WC2R 2LS London
3 shared publications Ravish Mehra
Facebook Reality Labs 3 , 8747 Willows Road, Redmond, Washington 98052, USA
3 shared publications- Ali Khajeh-Saeed
Reality Labs Research at Meta, Redmond, WA, USA
2 shared publications Lauri Savioja
Department of Computer Science, Aalto University, Otaniementie 17, P.O. Box 15500, FI-00076 Aalto, Finland
2 shared publications- Lauri Savioja
Department of Computer Science, Acoustics Laboratory, Aalto University, Espoo, Finland
2 shared publications
Latest Publications
- 26 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech and Language Processing
- Vol. PP, 1-15
Binaural Signal Matching with Wearable Arrays for Near-Field Sources and Directional Focus
This paper investigates the performance of Binaural Signal Matching (BSM) methods for near-field sound reproduction using a wearable glasses-mounted microphone array. BSM is a flexible, signal-independent approach for binaural rendering with arbitrary arrays, but its conventional formulation assumes far-field sources. In our previous work, we proposed a near-field extension of BSM (NF-BSM) that incorporates distance-dependent modeling and showed improved performance over far-field BSM using analytic data, though degradation persisted for sources very close to the array. In this study, we extend that analysis by using realistic simulated data of near-field Head-Related Transfer Functions (HRTFs) and Acoustic Transfer Functions (ATFs) of the array, accounting for listener head rotation and evaluating binaural cues such as interaural level and time differences (ILD and ITD). A key contribution is the introduction of a Field of View (FoV) weighting, designed to emphasize perceptually relevant directions and improve robustness under challenging conditions. Results from both simulation and a listening test confirm that NF-BSM outperforms traditional far-field BSM in near-field scenarios, and that the proposed NF-FoV-BSM method achieves the best perceptual and objective quality among all tested methods, particularly at close source distances and under head rotation. These findings highlight the limitations for far-field models in near-field sources and demonstrate that incorporating source distance and directional weighting can significantly improve binaural reproduction performance for wearable spatial audio systems.
- 26 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Audio, Speech and Language Processing
- Vol. PP, 1-15
Binaural Signal Matching with Wearable Arrays for Near-Field Sources and Directional Focus
This paper investigates the performance of Binaural Signal Matching (BSM) methods for near-field sound reproduction using a wearable glasses-mounted microphone array. BSM is a flexible, signal-independent approach for binaural rendering with arbitrary arrays, but its conventional formulation assumes far-field sources. In our previous work, we proposed a near-field extension of BSM (NF-BSM) that incorporates distance-dependent modeling and showed improved performance over far-field BSM using analytic data, though degradation persisted for sources very close to the array. In this study, we extend that analysis by using realistic simulated data of near-field Head-Related Transfer Functions (HRTFs) and Acoustic Transfer Functions (ATFs) of the array, accounting for listener head rotation and evaluating binaural cues such as interaural level and time differences (ILD and ITD). A key contribution is the introduction of a Field of View (FoV) weighting, designed to emphasize perceptually relevant directions and improve robustness under challenging conditions. Results from both simulation and a listening test confirm that NF-BSM outperforms traditional far-field BSM in near-field scenarios, and that the proposed NF-FoV-BSM method achieves the best perceptual and objective quality among all tested methods, particularly at close source distances and under head rotation. These findings highlight the limitations for far-field models in near-field sources and demonstrate that incorporating source distance and directional weighting can significantly improve binaural reproduction performance for wearable spatial audio systems.
- Open Access
- 31 October 2024
- Published by Elsevier in Applied Acoustics
- Vol. 228
On the accuracy of finite-difference time-domain simulations of head-related transfer functions as a function of model complexity
- 31 October 2024
- Published by Elsevier in Applied Acoustics
- Vol. 228
Open AccessOn the accuracy of finite-difference time-domain simulations of head-related transfer functions as a function of model complexity
- 3 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ACM Transactions on Audio, Speech, and Language Processing
- Vol. 31 (23299290) , 2579-2591
Verification on Head-Related Transfer Functions of a Snowman Model Simulated Using the Finite-Difference Time-Domain Method
Although finite-difference time-domain (FDTD) simulations are extensively used in acoustics, studies assessing the reliability and the accuracy of the implemented method are scarce. Moreover, the operational validity of a simulation method is context-dependent. Motivated by the context of head-related transfer function (HRTF) prediction, this work presents a verification procedure for FDTD-simulated HRTFs from a simplified model of a human head and torso which comprises two spheres and is known as the snowman model. The analytic solution required by the code verification is computed with the multipole reexpansion technique and used to compute convergence rate estimates. A solution verification process follows in which asymptotic predictions are computed. Results from the code verification show scattered convergence rates which attained the expected first-order accuracy at frequencies below 1 kHz when a linear regression model was used as the estimation procedure. Results from the solution verification show that the asymptotic predictions are accurate up to 10 kHz, after which bias is observed. Assessing the accuracy of the employed solution verification procedure revealed that the absolute difference between the $\log$ -magnitude of the asymptotic predictions and this of the analytic solution is within 1 dB up to 11589 Hz across the HRTF directions considered.
- 3 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ACM Transactions on Audio, Speech, and Language Processing
- Vol. 31 (23299290) , 2579-2591
Verification on Head-Related Transfer Functions of a Snowman Model Simulated Using the Finite-Difference Time-Domain Method
Although finite-difference time-domain (FDTD) simulations are extensively used in acoustics, studies assessing the reliability and the accuracy of the implemented method are scarce. Moreover, the operational validity of a simulation method is context-dependent. Motivated by the context of head-related transfer function (HRTF) prediction, this work presents a verification procedure for FDTD-simulated HRTFs from a simplified model of a human head and torso which comprises two spheres and is known as the snowman model. The analytic solution required by the code verification is computed with the multipole reexpansion technique and used to compute convergence rate estimates. A solution verification process follows in which asymptotic predictions are computed. Results from the code verification show scattered convergence rates which attained the expected first-order accuracy at frequencies below 1 kHz when a linear regression model was used as the estimation procedure. Results from the solution verification show that the asymptotic predictions are accurate up to 10 kHz, after which bias is observed. Assessing the accuracy of the employed solution verification procedure revealed that the absolute difference between the $\log$ -magnitude of the asymptotic predictions and this of the analytic solution is within 1 dB up to 11589 Hz across the HRTF directions considered.
- Open Access
- 1 June 2022
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 2 (6) , 062401
Finite-difference time-domain simulations: Verification on head-related transfer functions of a rigid sphere model
This paper presents a verification procedure for finite-difference time-domain-simulated head-related transfer functions (HRTFs) from a simplified model of a human head, a sphere. The analytic solution required by the code verification is computed with the multipole reexpansion technique and used to estimate convergence rates. A solution verification process follows in which asymptotic predictions are computed. For the HRTFs considered and employed grids, results show that the convergence rates attain the expected first-order accuracy at lower frequencies, after which scattered estimates are observed. Results also reveal that the asymptotic predictions are accurate up to 10 kHz, after which bias is observed.
- 1 June 2022
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 2 (6) , 062401
Open AccessFinite-difference time-domain simulations: Verification on head-related transfer functions of a rigid sphere model
This paper presents a verification procedure for finite-difference time-domain-simulated head-related transfer functions (HRTFs) from a simplified model of a human head, a sphere. The analytic solution required by the code verification is computed with the multipole reexpansion technique and used to estimate convergence rates. A solution verification process follows in which asymptotic predictions are computed. For the HRTFs considered and employed grids, results show that the convergence rates attain the expected first-order accuracy at lower frequencies, after which scattered estimates are observed. Results also reveal that the asymptotic predictions are accurate up to 10 kHz, after which bias is observed.
- Open Access
- 1 July 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 148 (1) , 153-166
Numerical simulations of near-field head-related transfer functions: Magnitude verification and validation with laser spark sources
Despite possessing an increased perceptual significance, near-field head-related transfer functions (nf-HRTFs) are more difficult to acquire compared to far-field head-related transfer functions. If properly validated, numerical simulations could be employed to estimate nf-HRTFs: the present study aims to validate the usage of wave-based simulations in the near-field. A thorough validation study is designed where various sources of error are investigated and controlled. The present work proposes the usage of a highly-omnidirectional laser-induced breakdown (LIB) of air as an acoustic point source in nf-HRTF measurements. Despite observed departures from the linear regime of the LIB pressure pulse, the validation results show that asymptotically-estimated solutions to a lossless model (wave-equation and rigid boundaries) agree in magnitude with the LIB-measured nf-HRTF of a rigid head replica approximately within 1–2 dB up to about 17 kHz. Except a decreased reliability in notch estimation, no significant shortcoming of the continuous model is found relative to the measurements below 17 kHz. The study also shows the difficulty in obtaining accurate surface boundary impedance values for accurate validation studies.
- 1 July 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 148 (1) , 153-166
Open AccessNumerical simulations of near-field head-related transfer functions: Magnitude verification and validation with laser spark sources
Despite possessing an increased perceptual significance, near-field head-related transfer functions (nf-HRTFs) are more difficult to acquire compared to far-field head-related transfer functions. If properly validated, numerical simulations could be employed to estimate nf-HRTFs: the present study aims to validate the usage of wave-based simulations in the near-field. A thorough validation study is designed where various sources of error are investigated and controlled. The present work proposes the usage of a highly-omnidirectional laser-induced breakdown (LIB) of air as an acoustic point source in nf-HRTF measurements. Despite observed departures from the linear regime of the LIB pressure pulse, the validation results show that asymptotically-estimated solutions to a lossless model (wave-equation and rigid boundaries) agree in magnitude with the LIB-measured nf-HRTF of a rigid head replica approximately within 1–2 dB up to about 17 kHz. Except a decreased reliability in notch estimation, no significant shortcoming of the continuous model is found relative to the measurements below 17 kHz. The study also shows the difficulty in obtaining accurate surface boundary impedance values for accurate validation studies.
- Open Access
- 1 May 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 147 (5) , 3631-3645
Pinna-related transfer functions and lossless wave equation using finite-difference methods: Validation with measurements
Nowadays, wave-based simulations of head-related transfer functions (HRTFs) lack strong justifications to replace HRTF measurements. The main cause is the complex interactions between uncertainties and biases in both simulated and measured HRTFs. This paper deals with the validation of pinna-related high-frequency information in the ipsilateral directions-of-arrival, computed by lossless wave-based simulations with finite-difference models. A simpler yet related problem is given by the pinna-related transfer function (PRTF), which encodes the acoustical effects of only the external ear. Results stress that PRTF measurements are generally highly repeatable but not necessarily easily reproducible, leading to critical issues in terms of reliability for any ground truth condition. On the other hand, PRTF simulations exhibit an increasing uncertainty with frequency and grid-dependent frequency changes, which are here quantified analyzing the benefits in the use of a unique asymptotic solution. In this validation study, the employed finite-difference model accurately and reliably predict the PRTF magnitude mostly within ±1 dB up to ≈8 kHz and a space- and frequency-averaged spectral distortion within about 2 dB up to ≈ 18 kHz.
- 1 May 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 147 (5) , 3631-3645
Open AccessPinna-related transfer functions and lossless wave equation using finite-difference methods: Validation with measurements
Nowadays, wave-based simulations of head-related transfer functions (HRTFs) lack strong justifications to replace HRTF measurements. The main cause is the complex interactions between uncertainties and biases in both simulated and measured HRTFs. This paper deals with the validation of pinna-related high-frequency information in the ipsilateral directions-of-arrival, computed by lossless wave-based simulations with finite-difference models. A simpler yet related problem is given by the pinna-related transfer function (PRTF), which encodes the acoustical effects of only the external ear. Results stress that PRTF measurements are generally highly repeatable but not necessarily easily reproducible, leading to critical issues in terms of reliability for any ground truth condition. On the other hand, PRTF simulations exhibit an increasing uncertainty with frequency and grid-dependent frequency changes, which are here quantified analyzing the benefits in the use of a unique asymptotic solution. In this validation study, the employed finite-difference model accurately and reliably predict the PRTF magnitude mostly within ±1 dB up to ≈8 kHz and a space- and frequency-averaged spectral distortion within about 2 dB up to ≈ 18 kHz.
- Open Access
- 1 November 2019
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 146 (5) , 3629-3645
Pinna-related transfer functions and lossless wave equation using finite-difference methods: Verification and asymptotic solution
A common approach when employing discrete mathematical models is to assess the reliability and credibility of the computation of interest through a process known as solution verification. Present-day computed head-related transfer functions (HRTFs) seem to lack robust and reliable assessments of the numerical errors embedded in the results which makes validation of wave-based models difficult. This process requires a good understanding of the involved sources of error which are systematically reviewed here. The current work aims to quantify the pinna-related high-frequency computational errors in the context of HRTFs and wave-based simulations with finite-difference models. As a prerequisite for solution verification, code verification assesses the reliability of the proposed implementation. In this paper, known and manufactured formal solutions are used and tailored for the wave equation and frequency-independent boundary conditions inside a rectangular room of uniform acoustic wall-impedance. Asymptotic estimates for pinna acoustics are predicted in the frequency domain based on regression models and a convergence study on sub-millimeter grids. Results show an increasing uncertainty with frequency and a significant frequency-dependent change among computations on different grids.
- 1 November 2019
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 146 (5) , 3629-3645
Open AccessPinna-related transfer functions and lossless wave equation using finite-difference methods: Verification and asymptotic solution
A common approach when employing discrete mathematical models is to assess the reliability and credibility of the computation of interest through a process known as solution verification. Present-day computed head-related transfer functions (HRTFs) seem to lack robust and reliable assessments of the numerical errors embedded in the results which makes validation of wave-based models difficult. This process requires a good understanding of the involved sources of error which are systematically reviewed here. The current work aims to quantify the pinna-related high-frequency computational errors in the context of HRTFs and wave-based simulations with finite-difference models. As a prerequisite for solution verification, code verification assesses the reliability of the proposed implementation. In this paper, known and manufactured formal solutions are used and tailored for the wave equation and frequency-independent boundary conditions inside a rectangular room of uniform acoustic wall-impedance. Asymptotic estimates for pinna acoustics are predicted in the frequency domain based on regression models and a convergence study on sub-millimeter grids. Results show an increasing uncertainty with frequency and a significant frequency-dependent change among computations on different grids.
- Open Access
- 1 May 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 139 (5) , 2489-2504
Influence of voxelization on finite difference time domain simulations of head-related transfer functions
The scattering around the human pinna that is captured by the Head-Related Transfer Functions (HRTFs) is a complex problem that creates uncertainties in both acoustical measurements and simulations. Within the simulation framework of Finite Difference Time Domain (FDTD) with axis-aligned staircase boundaries resulting from a voxelization process, the voxelization-based uncertainty propagating in the HRTF-captured sound field is quantified for one solid and two surface voxelization algorithms. Simulated results utilizing a laser-scanned mesh of Knowles Electronics Manikin for Acoustic Research (KEMAR) show that in the context of complex geometries with local topology comparable to grid spacing such as the human pinna, the voxelization-related uncertainties in simulations emerge at lower frequencies than the generally used accuracy bandwidths. Numerical simulations show that the voxelization process induces both random error and algorithm-dependent bias in the simulated HRTF spectral features. Frequencies fr below which the random error is bounded by various dB thresholds are estimated and predicted. Particular shortcomings of the used voxelization algorithms are identified and the influence of the surface impedance on the induced errors is studied. Simulations are also validated against measurements.
- 1 May 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 139 (5) , 2489-2504
Open AccessInfluence of voxelization on finite difference time domain simulations of head-related transfer functions
The scattering around the human pinna that is captured by the Head-Related Transfer Functions (HRTFs) is a complex problem that creates uncertainties in both acoustical measurements and simulations. Within the simulation framework of Finite Difference Time Domain (FDTD) with axis-aligned staircase boundaries resulting from a voxelization process, the voxelization-based uncertainty propagating in the HRTF-captured sound field is quantified for one solid and two surface voxelization algorithms. Simulated results utilizing a laser-scanned mesh of Knowles Electronics Manikin for Acoustic Research (KEMAR) show that in the context of complex geometries with local topology comparable to grid spacing such as the human pinna, the voxelization-related uncertainties in simulations emerge at lower frequencies than the generally used accuracy bandwidths. Numerical simulations show that the voxelization process induces both random error and algorithm-dependent bias in the simulated HRTF spectral features. Frequencies fr below which the random error is bounded by various dB thresholds are estimated and predicted. Particular shortcomings of the used voxelization algorithms are identified and the influence of the surface impedance on the induced errors is studied. Simulations are also validated against measurements.