Qing Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qing Hu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Haijun Wang
School of Ocean Engineering and Technology, Sun Yat-sen University, Zhuhai, China
2 shared publications - Jianjun Zhang
School of Ocean Engineering and Technology, Sun Yat-sen University & Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), Zhuhai 519000, China
2 shared publications - Yanqing Jia
School of Ocean Engineering and Technology, Sun Yat-Sen University, Zhuhai 519000, China
2 shared publications - Chao Li
Ocean College, Zhejiang University, Zhoushan, China
1 shared publication - Dabin Lin
School of Optoelectronic Engineering, Xi’an Technological University, Xi’an 710032, China
1 shared publication - Danling Tang
Guangdong Remote Sensing Center for Marine Ecology and Environment Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou) Guangzhou China
1 shared publication
Latest Publications
- Open Access
Dynamic Beam Control-Based Neighbor Discovery Protocol for Underwater Acoustic Networks with Multi-Parallel Transceiver
Neighbor discovery in underwater acoustic networks (UANs) faces challenges such as high propagation delay and limited spectrum resources. This study proposes a dynamic beam control-based multi-parallel transceiver neighbor discovery protocol (DBCB), which improves node discovery efficiency by dynamically matching transmission beams and optimizing spatiotemporal frequency resource allocation. During node initialization, the master node broadcasts omnidirectionally to quickly capture coarse-grained neighbor parameters. After obtaining these parameters, the master node dynamically allocates orthogonal frequency bands for directional multi-beam validation and optimizes beam alignment, resource allocation, and topology stability through real-time feedback. The protocol adaptively optimizes transmission power and continues the discovery task, while nodes that remain undiscovered for extended periods automatically adjust their receiving gain. The adaptive power control mechanism adjusts the transmission power based on node distance and azimuth, enabling the protocol to maintain low power consumption and enhance interference resilience. Simulation results show that the DBCB protocol outperforms similar neighbor discovery protocols based on directional transmission-reception (DTR) and random two-way (RTW) mechanisms, with improvements of 7.84% and 28.17% in average discovery rate, and reductions of 28.13% and 59.06% in average discovery delay, respectively. The anechoic tank experiment demonstrates that multi-beam parallel transmission effectively improves underwater node discovery efficiency, with simulation results aligning with experimental data, confirming the stability and high efficiency of the system.
Open AccessDynamic Beam Control-Based Neighbor Discovery Protocol for Underwater Acoustic Networks with Multi-Parallel Transceiver
Neighbor discovery in underwater acoustic networks (UANs) faces challenges such as high propagation delay and limited spectrum resources. This study proposes a dynamic beam control-based multi-parallel transceiver neighbor discovery protocol (DBCB), which improves node discovery efficiency by dynamically matching transmission beams and optimizing spatiotemporal frequency resource allocation. During node initialization, the master node broadcasts omnidirectionally to quickly capture coarse-grained neighbor parameters. After obtaining these parameters, the master node dynamically allocates orthogonal frequency bands for directional multi-beam validation and optimizes beam alignment, resource allocation, and topology stability through real-time feedback. The protocol adaptively optimizes transmission power and continues the discovery task, while nodes that remain undiscovered for extended periods automatically adjust their receiving gain. The adaptive power control mechanism adjusts the transmission power based on node distance and azimuth, enabling the protocol to maintain low power consumption and enhance interference resilience. Simulation results show that the DBCB protocol outperforms similar neighbor discovery protocols based on directional transmission-reception (DTR) and random two-way (RTW) mechanisms, with improvements of 7.84% and 28.17% in average discovery rate, and reductions of 28.13% and 59.06% in average discovery delay, respectively. The anechoic tank experiment demonstrates that multi-beam parallel transmission effectively improves underwater node discovery efficiency, with simulation results aligning with experimental data, confirming the stability and high efficiency of the system.
- Open Access
- 16 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1615
High-Resolution Imaging of Targets Using Broadband Acoustic Orbital Angular Momentum Waves and Modal-Domain Focusing Beamforming
Applying the acoustic orbital angular momentum (AOAM) wave for underwater imaging can yield richer differential target echo information, a consequence of its spiral wavefront phase and multiple mutually orthogonal modes. In broadband AOAM wave imaging, the resolution of conventional beamforming is very low. Although sub-band processing can improve resolution, it cannot handle coherent signal sources. To further enhance the resolution of broadband AOAM wave underwater imaging and address the imaging issue of coherent signals in practice, this paper proposed a modal-domain focusing beamforming method. This paper initially established the echo signal model of broadband AOAM waves based on a uniform circular array. This was followed by the derivation of the beam output signal model. Finally, a new modal-domain focusing transformation matrix was constructed. Numerical results show that the proposed method reduces the background level of the beam pattern to −86dB in simple coherent target source imaging, compared with −40dB for sub-band methods and −70dB for plane wave focusing processing. Furthermore, under different noise conditions, the proposed method achieves high-resolution imaging of complex structures and good imaging of details.
- 16 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1615
Open AccessHigh-Resolution Imaging of Targets Using Broadband Acoustic Orbital Angular Momentum Waves and Modal-Domain Focusing Beamforming
Applying the acoustic orbital angular momentum (AOAM) wave for underwater imaging can yield richer differential target echo information, a consequence of its spiral wavefront phase and multiple mutually orthogonal modes. In broadband AOAM wave imaging, the resolution of conventional beamforming is very low. Although sub-band processing can improve resolution, it cannot handle coherent signal sources. To further enhance the resolution of broadband AOAM wave underwater imaging and address the imaging issue of coherent signals in practice, this paper proposed a modal-domain focusing beamforming method. This paper initially established the echo signal model of broadband AOAM waves based on a uniform circular array. This was followed by the derivation of the beam output signal model. Finally, a new modal-domain focusing transformation matrix was constructed. Numerical results show that the proposed method reduces the background level of the beam pattern to −86dB in simple coherent target source imaging, compared with −40dB for sub-band methods and −70dB for plane wave focusing processing. Furthermore, under different noise conditions, the proposed method achieves high-resolution imaging of complex structures and good imaging of details.
- Top Cited PapersOpen Access
Recent Progress in Flexible Piezoelectric Tactile Sensors: Materials, Structures, Fabrication, and Application
Flexible tactile sensors are widely used in aerospace, medical and health monitoring, electronic skin, human–computer interaction, and other fields due to their unique advantages, thus becoming a research hotspot. The goal is to develop a flexible tactile sensor characterized by outstanding sensitivity, extensive detection range and linearity, elevated spatial resolution, and commendable adaptability. Among several strategies like capacitive, piezoresistive, and triboelectric tactile sensors, etc., we focus on piezoelectric tactile sensors because of their self-powered nature, high sensitivity, and quick response time. These sensors can respond to a wide range of dynamic mechanical stimuli and turn them into measurable electrical signals. This makes it possible to accurately detect objects, including their shapes and textures, and for them to sense touch in real time. This work encapsulates current advancements in flexible piezoelectric tactile sensors, focusing on enhanced material properties, optimized structural design, improved fabrication techniques, and broadened application domains. We outline the challenges facing piezoelectric tactile sensors to provide inspiration and guidance for their future development.
Top Cited PapersOpen AccessRecent Progress in Flexible Piezoelectric Tactile Sensors: Materials, Structures, Fabrication, and Application
Flexible tactile sensors are widely used in aerospace, medical and health monitoring, electronic skin, human–computer interaction, and other fields due to their unique advantages, thus becoming a research hotspot. The goal is to develop a flexible tactile sensor characterized by outstanding sensitivity, extensive detection range and linearity, elevated spatial resolution, and commendable adaptability. Among several strategies like capacitive, piezoresistive, and triboelectric tactile sensors, etc., we focus on piezoelectric tactile sensors because of their self-powered nature, high sensitivity, and quick response time. These sensors can respond to a wide range of dynamic mechanical stimuli and turn them into measurable electrical signals. This makes it possible to accurately detect objects, including their shapes and textures, and for them to sense touch in real time. This work encapsulates current advancements in flexible piezoelectric tactile sensors, focusing on enhanced material properties, optimized structural design, improved fabrication techniques, and broadened application domains. We outline the challenges facing piezoelectric tactile sensors to provide inspiration and guidance for their future development.
- 1 February 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 155 (2) , 1240-1252
High resolution imaging of acoustic orbital angular momentum wave based on orthogonal matching tracking
The orbital angular momentum (OAM) wave has shown great potential for improving radar imaging and underwater communication performance due to its helical wavefront phase and infinite orthogonal modes. However, there are currently no known applications of this technology in underwater imaging. In this paper, we employed acoustic OAM wave for underwater imaging and established transceiver signal models using the uniform circular array. We concurrently achieved two-dimensional imaging of azimuth and elevation angles, which differs from radar imaging. We proposed a matching process for the echo signal in the modal domain, the OAM wave beam image's sidelobe decreased by 7.9 dB in the elevation direction and 6.1 dB in the azimuth direction compared to the plane wave, with the mainlobe decreased by 0.2° in the elevation direction and 0.4° in the azimuth direction. Furthermore, this paper introduced OAM wave high-resolution image reconstruction based on the orthogonal matching pursuit (OMP) algorithm. Finally, we implemented broadband acoustic OAM wave for underwater imaging and introduced an image reconstruction method based on the modal domain OMP algorithm. Simulation results demonstrate that the use of OAM wave in underwater imaging is feasible, and the proposed scheme can achieve high-resolution imaging.
- 1 February 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 155 (2) , 1240-1252
High resolution imaging of acoustic orbital angular momentum wave based on orthogonal matching tracking
The orbital angular momentum (OAM) wave has shown great potential for improving radar imaging and underwater communication performance due to its helical wavefront phase and infinite orthogonal modes. However, there are currently no known applications of this technology in underwater imaging. In this paper, we employed acoustic OAM wave for underwater imaging and established transceiver signal models using the uniform circular array. We concurrently achieved two-dimensional imaging of azimuth and elevation angles, which differs from radar imaging. We proposed a matching process for the echo signal in the modal domain, the OAM wave beam image's sidelobe decreased by 7.9 dB in the elevation direction and 6.1 dB in the azimuth direction compared to the plane wave, with the mainlobe decreased by 0.2° in the elevation direction and 0.4° in the azimuth direction. Furthermore, this paper introduced OAM wave high-resolution image reconstruction based on the orthogonal matching pursuit (OMP) algorithm. Finally, we implemented broadband acoustic OAM wave for underwater imaging and introduced an image reconstruction method based on the modal domain OMP algorithm. Simulation results demonstrate that the use of OAM wave in underwater imaging is feasible, and the proposed scheme can achieve high-resolution imaging.
- Open Access
- 24 November 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (12) , 2226
Depth Spatial Characterization of Marine Environmental Noise in the Zengmu Basin
Based on the measured data obtained from an array of optical fiber hydrophones, this paper analyzes and interprets the depth spatial spectrum characteristics, correlation characteristics, and vertical directionality of marine environmental noise in the Zengmu Basin. The analysis is conducted within the frequency range of 20 Hz to 2500 Hz. Additionally, the statistical characteristics of the probability density distribution of environmental noise in the Zengmu Basin were studied and analyzed. The findings indicate that the predominant ambient noise in the low-frequency range (less than 400 Hz) in the Zengmu Basin is primarily attributed to distant sources, commonly identified as ship radiation noise. In the high-frequency band (greater than 400 Hz), the marine ambient noise is primarily derived from the sea surface, predominantly in the form of wind-generated noise. In the frequency range of 25–1600 Hz, examined in this study, the power spectral density exhibits an average decrease of over 3 dB and a maximum decrease of over 5 dB with each doubling of frequency. When the frequency is below 400 Hz, there is a higher vertical spatial correlation to ambient noise. The vertical directivity of the noise energy is horizontal, meaning that it is perpendicular to the vertical array direction. Additionally, the probability distribution of the noise level approximately follows the Burr distribution. When the frequency exceeds 400 Hz, there is a low vertical spatial correlation to noise. The vertical directivity of environmental noise exhibits distinct grooves in the horizontal direction, and the probability distribution of the noise spectrum level generally follows a normal distribution.
- 24 November 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (12) , 2226
Open AccessDepth Spatial Characterization of Marine Environmental Noise in the Zengmu Basin
Based on the measured data obtained from an array of optical fiber hydrophones, this paper analyzes and interprets the depth spatial spectrum characteristics, correlation characteristics, and vertical directionality of marine environmental noise in the Zengmu Basin. The analysis is conducted within the frequency range of 20 Hz to 2500 Hz. Additionally, the statistical characteristics of the probability density distribution of environmental noise in the Zengmu Basin were studied and analyzed. The findings indicate that the predominant ambient noise in the low-frequency range (less than 400 Hz) in the Zengmu Basin is primarily attributed to distant sources, commonly identified as ship radiation noise. In the high-frequency band (greater than 400 Hz), the marine ambient noise is primarily derived from the sea surface, predominantly in the form of wind-generated noise. In the frequency range of 25–1600 Hz, examined in this study, the power spectral density exhibits an average decrease of over 3 dB and a maximum decrease of over 5 dB with each doubling of frequency. When the frequency is below 400 Hz, there is a higher vertical spatial correlation to ambient noise. The vertical directivity of the noise energy is horizontal, meaning that it is perpendicular to the vertical array direction. Additionally, the probability distribution of the noise level approximately follows the Burr distribution. When the frequency exceeds 400 Hz, there is a low vertical spatial correlation to noise. The vertical directivity of environmental noise exhibits distinct grooves in the horizontal direction, and the probability distribution of the noise spectrum level generally follows a normal distribution.
- 24 April 2023
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 557
Coupling coefficient analysis of composite bar: A new idea for the design of multi-resonant longitudinal transducer
- 24 April 2023
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 557
Coupling coefficient analysis of composite bar: A new idea for the design of multi-resonant longitudinal transducer
- Open Access
- 28 November 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (12) , 1826
Differential Evolution Algorithm-Aided Time-Varying Carrier Frequency Offset Estimation for OFDM Underwater Acoustic Communication
Orthogonal frequency division multiplexing (OFDM) is the preferred scheme for high-speed communication in the field of underwater acoustic communication. However, it is very sensitive to the carrier frequency offset (CFO). This study used a time-varying CFO estimation method aided by the differential evolution (DE) algorithm to accurately estimate the CFO of an OFDM system. This method was based on the principle that the received OFDM signal with inter-carrier interference could be considered by a Multi Carrier-code division multiple access (MC-CDMA) system on the receiver side because MC-CDMA is a technology that combines OFDM and code division multiple access (CMDA). Because it is suitable for solving problems where there are dependencies between adjacent variables, the DE algorithm was used to capture the varying CFO values on the adjacent blocks. The spreading code of the MC-CDMA was obtained based on the estimated CFO values, which were elements in the DE solutions. Then the received signal was reconstructed. The Root-Mean-Square Error between the reconstructed and actual received signals was used as the cost function, and the CFO was estimated using the DE algorithm because of its powerful parallel search capability. The simulation results showed that the proposed method had a high estimation accuracy. Compared with other intelligent optimization algorithms such as the genetic algorithm and simulated annealing mutated-genetic algorithm, the time-varying CFO estimation performance of the DE algorithm was better because of its unique ability to solve problems with dependencies between adjacent variables. Specifically, under the condition of a high signal-to-noise ratio, the improvement of estimation accuracy reaches 36.13%, and the Bit Error Rate of demodulation is thus reduced by 75%, compared with the reference algorithms. In addition, the proposed method also has good applicability to modulation methods. For phase-shift keying and quadrature amplitude modulation, in particular, the proposed method not only achieved high-precision time-varying CFO estimation values, but also reduced the demodulation deterioration caused by noise.
- 28 November 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (12) , 1826
Open AccessDifferential Evolution Algorithm-Aided Time-Varying Carrier Frequency Offset Estimation for OFDM Underwater Acoustic Communication
Orthogonal frequency division multiplexing (OFDM) is the preferred scheme for high-speed communication in the field of underwater acoustic communication. However, it is very sensitive to the carrier frequency offset (CFO). This study used a time-varying CFO estimation method aided by the differential evolution (DE) algorithm to accurately estimate the CFO of an OFDM system. This method was based on the principle that the received OFDM signal with inter-carrier interference could be considered by a Multi Carrier-code division multiple access (MC-CDMA) system on the receiver side because MC-CDMA is a technology that combines OFDM and code division multiple access (CMDA). Because it is suitable for solving problems where there are dependencies between adjacent variables, the DE algorithm was used to capture the varying CFO values on the adjacent blocks. The spreading code of the MC-CDMA was obtained based on the estimated CFO values, which were elements in the DE solutions. Then the received signal was reconstructed. The Root-Mean-Square Error between the reconstructed and actual received signals was used as the cost function, and the CFO was estimated using the DE algorithm because of its powerful parallel search capability. The simulation results showed that the proposed method had a high estimation accuracy. Compared with other intelligent optimization algorithms such as the genetic algorithm and simulated annealing mutated-genetic algorithm, the time-varying CFO estimation performance of the DE algorithm was better because of its unique ability to solve problems with dependencies between adjacent variables. Specifically, under the condition of a high signal-to-noise ratio, the improvement of estimation accuracy reaches 36.13%, and the Bit Error Rate of demodulation is thus reduced by 75%, compared with the reference algorithms. In addition, the proposed method also has good applicability to modulation methods. For phase-shift keying and quadrature amplitude modulation, in particular, the proposed method not only achieved high-precision time-varying CFO estimation values, but also reduced the demodulation deterioration caused by noise.
- Open Access
A Dual Channel Medium Access Control (MAC) Protocol for Underwater Acoustic Sensor Networks Based on Directional Antenna
Medium access control (MAC) protocol is an important link for achieving networks function in any wireless networks; an efficient and reliable MAC protocol is crucial for an effective underwater acoustic sensor networks (UASNs). Significant differences between UASNs and terrestrial sensor networks (TSNs) render the traditional MAC protocols applied on land inapplicable underwater. Existing MAC protocols for UASNs use the omnidirectional antenna, which wastes energy, restricts the network’s coverage range, and brings about unnecessary interferences in neighbor nodes. This paper proposes a dual channel MAC protocol for UASNs based on directional antenna (DADC-MAC), which increases the network coverage range, efficiently utilizes space, and reduces node interference compared to the omnidirectional antenna. The DADC-MAC protocol divides the channel into a data transmission channel and busy prompt message channel; the node uses the former to transmit the control frame and DATA package while the sending node and receiving node use the latter channel to inform the neighbor nodes of on-going communications to prevent DATA package collision. A neighbor discovery mechanism and directional network allocation vector are applied to resolve hidden terminal and deafness problems. Simulation results show that the DADC-MAC protocol could improve network throughput and reduce end-to-end delay, is efficient, performs well, and is well suited to both symmetrical and asymmetrical UASNs topology.
Open AccessA Dual Channel Medium Access Control (MAC) Protocol for Underwater Acoustic Sensor Networks Based on Directional Antenna
Medium access control (MAC) protocol is an important link for achieving networks function in any wireless networks; an efficient and reliable MAC protocol is crucial for an effective underwater acoustic sensor networks (UASNs). Significant differences between UASNs and terrestrial sensor networks (TSNs) render the traditional MAC protocols applied on land inapplicable underwater. Existing MAC protocols for UASNs use the omnidirectional antenna, which wastes energy, restricts the network’s coverage range, and brings about unnecessary interferences in neighbor nodes. This paper proposes a dual channel MAC protocol for UASNs based on directional antenna (DADC-MAC), which increases the network coverage range, efficiently utilizes space, and reduces node interference compared to the omnidirectional antenna. The DADC-MAC protocol divides the channel into a data transmission channel and busy prompt message channel; the node uses the former to transmit the control frame and DATA package while the sending node and receiving node use the latter channel to inform the neighbor nodes of on-going communications to prevent DATA package collision. A neighbor discovery mechanism and directional network allocation vector are applied to resolve hidden terminal and deafness problems. Simulation results show that the DADC-MAC protocol could improve network throughput and reduce end-to-end delay, is efficient, performs well, and is well suited to both symmetrical and asymmetrical UASNs topology.