Vitalii Savchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Vitalii Savchenko has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Laptiev
Taras Shevchenko National University of Kyiv
8 shared publications - Valentyn Sobchuk
Taras Shevchenko National University of Kyiv
4 shared publications - Alla Kobozieva
Одеський національний морський університет
3 shared publications - Oleg Barabash
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications - Anatolii Salii
The National Defense University of Ukraine named after Ivan Chernyakhovsky
2 shared publications - Bohdan Stepanchenko
Educational and Scientific Institute of Cybersecurity and Information Protection, State University of Information and Communication Technologies, Solomyanska Street 7, 03110 Kyiv, Ukraine
2 shared publications
Latest Publications
- Open Access
Application of Impulsive SIRQ Models for the Development of Forecasting and Cyberattack Mitigation Scenarios
This paper proposes an impulsive SIRQ model for the analysis of computer network resilience against malware propagation and distributed denial-of-service (DDoS) attacks. The model extends classical epidemic frameworks by combining the continuous-time dynamics of malicious object spreading with discrete control actions corresponding to mass updates, node isolation, and access control policies. A qualitative analysis of the resulting system of impulsive differential equations is performed. The basic reproduction number , identified as a threshold parameter characterizing the intensity of attack propagation, and sufficient conditions for the global asymptotic stability of the infection-free state are established. It is shown that, under periodic impulsive control, the infection-free state can be stabilized with respect to the target population coordinates even when . An exponential decay estimate for the total active threat is derived, guaranteeing the asymptotic extinction of the infected and quarantined node populations. The proposed approach provides quantitative criteria for the effectiveness of impulsive cyber defense strategies and offers a theoretical foundation for the design of adaptive multi-layer protection systems for critical information infrastructures. Practical interpretation of the results illustrates the dependence of the critical impulsive control period on the model parameters and demonstrates the applicability of the approach to cybersecurity strategy design.Open AccessApplication of Impulsive SIRQ Models for the Development of Forecasting and Cyberattack Mitigation Scenarios
This paper proposes an impulsive SIRQ model for the analysis of computer network resilience against malware propagation and distributed denial-of-service (DDoS) attacks. The model extends classical epidemic frameworks by combining the continuous-time dynamics of malicious object spreading with discrete control actions corresponding to mass updates, node isolation, and access control policies. A qualitative analysis of the resulting system of impulsive differential equations is performed. The basic reproduction number , identified as a threshold parameter characterizing the intensity of attack propagation, and sufficient conditions for the global asymptotic stability of the infection-free state are established. It is shown that, under periodic impulsive control, the infection-free state can be stabilized with respect to the target population coordinates even when . An exponential decay estimate for the total active threat is derived, guaranteeing the asymptotic extinction of the infected and quarantined node populations. The proposed approach provides quantitative criteria for the effectiveness of impulsive cyber defense strategies and offers a theoretical foundation for the design of adaptive multi-layer protection systems for critical information infrastructures. Practical interpretation of the results illustrates the dependence of the critical impulsive control period on the model parameters and demonstrates the applicability of the approach to cybersecurity strategy design. - Open Access
- 26 February 2026
- Published by MDPI AG in Preprints.org
Application of Impulsive SIRQ Models for the Development of Forecasting and Cyberattack Mitigation Scenarios
This paper proposes an impulsive SIRQ model for the analysis of computer network resilience against malware propagation and distributed denial-of-service (DDoS) attacks. The model extends classical epidemic frameworks by combining continuous-time dynamics of malicious object spreading with discrete control actions corresponding to mass updates, node isolation, and access control policies. A qualitative analysis of the resulting system of impulsive differential equations is performed. The basic reproduction number R0 identified as a threshold parameter characterizing the intensity of attack propagation, and sufficient conditions for the global asymptotic stability of the infection-free regime are established. It is shown that, under periodic impulsive control, the infection-free state can be stabilized with respect to the target population coordinates even when R0< 1. An exponential decay estimate for the total active threat is derived, guaranteeing the asymptotic extinction of the infected and quarantined node populations. The proposed approach provides quantitative criteria for the effectiveness of impulsive cyber-defense strategies and offers a theoretical foundation for the design of adaptive multi-layer protection systems for critical information infrastructures.
- 26 February 2026
- Published by MDPI AG in Preprints.org
Open AccessApplication of Impulsive SIRQ Models for the Development of Forecasting and Cyberattack Mitigation Scenarios
This paper proposes an impulsive SIRQ model for the analysis of computer network resilience against malware propagation and distributed denial-of-service (DDoS) attacks. The model extends classical epidemic frameworks by combining continuous-time dynamics of malicious object spreading with discrete control actions corresponding to mass updates, node isolation, and access control policies. A qualitative analysis of the resulting system of impulsive differential equations is performed. The basic reproduction number R0 identified as a threshold parameter characterizing the intensity of attack propagation, and sufficient conditions for the global asymptotic stability of the infection-free regime are established. It is shown that, under periodic impulsive control, the infection-free state can be stabilized with respect to the target population coordinates even when R0< 1. An exponential decay estimate for the total active threat is derived, guaranteeing the asymptotic extinction of the infected and quarantined node populations. The proposed approach provides quantitative criteria for the effectiveness of impulsive cyber-defense strategies and offers a theoretical foundation for the design of adaptive multi-layer protection systems for critical information infrastructures.
- 4 October 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 28-38
Modeling the Localization of Hidden Radio Transmitters Using Redundant Multi-Antenna Measurements
Today, the world is experiencing a sharp increase in the volume of industrial espionage. To counteract unauthorized information leakage, companies are forced to install expensive hardware of constant monitoring of the radio spectrum, which monitor radio transmitters activity in the certain area. In such hardware, the location of hidden transmitters is determined using appropriate software. Such software works well enough with the minimum required number of measurements, but in large complex buildings the minimum number of measurements may not be enough. Therefore, it is necessary to create a model for developing software to work with redundant measurements. The purpose of this study is to develop a model for determining hidden radio transmitters for a multi-position monitoring hardware taking into account information redundancy. To achieve the goal of the study, the article develops an algorithm for determining the coordinates of the transmitter by the redundant sample of distance measurements based on the Gauss-Newton method. The localization accuracy was investigated using a model based on the Least Squares Method. The main results of the study confirm the developed model effectiveness and show the dependence of localization accuracy on the number and geometry of the location of receiving antennas in the building. It was confirmed that the highest localization accuracy is achieved in the center of the tetrahedron formed by the receiving antennas. The practical value of the study is the possibility of creating automated monitoring complexes with specified localization accuracy parameters within specific building areas.
- 4 October 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 28-38
Modeling the Localization of Hidden Radio Transmitters Using Redundant Multi-Antenna Measurements
Today, the world is experiencing a sharp increase in the volume of industrial espionage. To counteract unauthorized information leakage, companies are forced to install expensive hardware of constant monitoring of the radio spectrum, which monitor radio transmitters activity in the certain area. In such hardware, the location of hidden transmitters is determined using appropriate software. Such software works well enough with the minimum required number of measurements, but in large complex buildings the minimum number of measurements may not be enough. Therefore, it is necessary to create a model for developing software to work with redundant measurements. The purpose of this study is to develop a model for determining hidden radio transmitters for a multi-position monitoring hardware taking into account information redundancy. To achieve the goal of the study, the article develops an algorithm for determining the coordinates of the transmitter by the redundant sample of distance measurements based on the Gauss-Newton method. The localization accuracy was investigated using a model based on the Least Squares Method. The main results of the study confirm the developed model effectiveness and show the dependence of localization accuracy on the number and geometry of the location of receiving antennas in the building. It was confirmed that the highest localization accuracy is achieved in the center of the tetrahedron formed by the receiving antennas. The practical value of the study is the possibility of creating automated monitoring complexes with specified localization accuracy parameters within specific building areas.
- 30 September 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 94-108
Application of Graph Theory to Ensure the Reliability of Steganographic Message Perception in the Creation of a Covert Communication Channel
The rapid advancement of information technologies and the pervasive digitalization of all areas of human activity have made the protection of digital information a critically important issue in modern society. Steganography has emerged as one of the most promising and effective approaches to information security. Among the key requirements for a steganographic system is the reliability of steganographic message perception. However, many existing methods do not systematically meet this requirement and are not designed to operate effectively with randomly selected containers. The purpose of this work is to improve the qualitative and quantitative indicators of the reliability of perception of a steganographic message generated by an arbitrary steganographic algorithm. Also, ensuring the possibility of operation of a steganographic message in conditions of a random container, without any modifications to the algorithm, by developing a method for selecting blocks of a digital image container for introducing additional information into them. The goal was achieved through the reasonable use of a specific oriented graph, which is associated with the image, for dividing container blocks into classes with the same indicators of the contribution of the high-frequency component. The most important result of the work is a theoretically substantiated definition of the block parameter, which gives an integral quantitative characteristic of its high-frequency component the normalized separation of the maximum singular value of the block. The practical significance of the obtained results lies in the development of an algorithmic implementation of the proposed method for selecting blocks for steganographic transformation, which allows improving, when applied, both qualitative (established by subjective ranking) and quantitative (estimated using the peak signal-to-noise ratio) indicators of the reliability of perception of a steganographic message generated by an arbitrary steganographic method.
- 30 September 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 94-108
Application of Graph Theory to Ensure the Reliability of Steganographic Message Perception in the Creation of a Covert Communication Channel
The rapid advancement of information technologies and the pervasive digitalization of all areas of human activity have made the protection of digital information a critically important issue in modern society. Steganography has emerged as one of the most promising and effective approaches to information security. Among the key requirements for a steganographic system is the reliability of steganographic message perception. However, many existing methods do not systematically meet this requirement and are not designed to operate effectively with randomly selected containers. The purpose of this work is to improve the qualitative and quantitative indicators of the reliability of perception of a steganographic message generated by an arbitrary steganographic algorithm. Also, ensuring the possibility of operation of a steganographic message in conditions of a random container, without any modifications to the algorithm, by developing a method for selecting blocks of a digital image container for introducing additional information into them. The goal was achieved through the reasonable use of a specific oriented graph, which is associated with the image, for dividing container blocks into classes with the same indicators of the contribution of the high-frequency component. The most important result of the work is a theoretically substantiated definition of the block parameter, which gives an integral quantitative characteristic of its high-frequency component the normalized separation of the maximum singular value of the block. The practical significance of the obtained results lies in the development of an algorithmic implementation of the proposed method for selecting blocks for steganographic transformation, which allows improving, when applied, both qualitative (established by subjective ranking) and quantitative (estimated using the peak signal-to-noise ratio) indicators of the reliability of perception of a steganographic message generated by an arbitrary steganographic method.
- Open Access
- 19 September 2025
- Published by University of Defence in Advances in Military Technology
- Vol. 20 (2) , 497-510
Research on the Parameters of Jet-Abrasive Devices for Battlefield Gun Barrel Restoration
This article investigates a jet-abrasive installation with a device for cleaning gun barrels, developed for field conditions. The possibility of efficient cleaning of artillery barrel surfaces without the need for stationary conditions is evaluated, which is crucial for maintaining the combat readiness of equipment during intensive combat operations. A special guiding device holding multiple sandblasting nozzles is used, ensuring an optimal flow of the air-abrasive mixture and improving the processing efficiency. The conducted experiments show the significant impact of the nozzle geometry on surface treatment parameters, demonstrating that the use of a special device enhances both the economic efficiency and processing speed. The study emphasizes the importance of developing technologies that reduce the time spent on restoration work while ensuring the effectiveness of cleaning procedures in the field.
- 19 September 2025
- Published by University of Defence in Advances in Military Technology
- Vol. 20 (2) , 497-510
Open AccessResearch on the Parameters of Jet-Abrasive Devices for Battlefield Gun Barrel Restoration
This article investigates a jet-abrasive installation with a device for cleaning gun barrels, developed for field conditions. The possibility of efficient cleaning of artillery barrel surfaces without the need for stationary conditions is evaluated, which is crucial for maintaining the combat readiness of equipment during intensive combat operations. A special guiding device holding multiple sandblasting nozzles is used, ensuring an optimal flow of the air-abrasive mixture and improving the processing efficiency. The conducted experiments show the significant impact of the nozzle geometry on surface treatment parameters, demonstrating that the use of a special device enhances both the economic efficiency and processing speed. The study emphasizes the importance of developing technologies that reduce the time spent on restoration work while ensuring the effectiveness of cleaning procedures in the field.
- 1 January 2025
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 3 (27) , 522-533
METHODS FOR ASSESSING INFORMATION SECURITY IN COMMUNICATION NETWORKS
The article considers methodological approaches to determining and assessing information security indicators in modern security systems. The authors focus on the complexity of the process of selecting indicators to assess the level of security, which requires taking into account a wide range of factors. These include the characteristics of protected components, destabilizing environmental influences, protection mechanisms, and the time aspect, which plays a key role in predicting the effectiveness of protective measures. A generalized approach to constructing an integral indicator is proposed, which allows for a comprehensive assessment of the state of information security. This approach is based on the formation of a system of vectors that include initial characteristics, complex security indicators, security parameters, and weighting factors. This method provides the ability to take into account various aspects of security and their relationships. For the practical application of security assessment models, three main methodological approaches are distinguished: empirical, theoretical, and combined theoretical-empirical. Practical recommendations are given for the effective application of assessment models. In particular, the need to involve highly qualified specialists who are able to adequately interpret the data obtained is emphasized. It is important to consider the behavior of indicators when changing input data, which allows predicting the system's response to new threats. To select the optimal variant of the protection system, it is proposed to use a modified minimax criterion. This approach allows taking into account the set of private quality criteria and provides the best value among the worst normalized indicators. This method provides a balance between various aspects of security, helping to find the optimal solution when designing and evaluating information protection systems. The proposed methodological approaches and practical recommendations are of great importance for increasing the effectiveness of information protection systems. They allow not only to assess the current state of security, but also to predict possible risks, which is important for ensuring the long-term stability of information systems.
- 1 January 2025
- Published by Borys Grinchenko Kyiv University in Cybersecurity: Education, Science, Technique
- Vol. 3 (27) , 522-533
METHODS FOR ASSESSING INFORMATION SECURITY IN COMMUNICATION NETWORKS
The article considers methodological approaches to determining and assessing information security indicators in modern security systems. The authors focus on the complexity of the process of selecting indicators to assess the level of security, which requires taking into account a wide range of factors. These include the characteristics of protected components, destabilizing environmental influences, protection mechanisms, and the time aspect, which plays a key role in predicting the effectiveness of protective measures. A generalized approach to constructing an integral indicator is proposed, which allows for a comprehensive assessment of the state of information security. This approach is based on the formation of a system of vectors that include initial characteristics, complex security indicators, security parameters, and weighting factors. This method provides the ability to take into account various aspects of security and their relationships. For the practical application of security assessment models, three main methodological approaches are distinguished: empirical, theoretical, and combined theoretical-empirical. Practical recommendations are given for the effective application of assessment models. In particular, the need to involve highly qualified specialists who are able to adequately interpret the data obtained is emphasized. It is important to consider the behavior of indicators when changing input data, which allows predicting the system's response to new threats. To select the optimal variant of the protection system, it is proposed to use a modified minimax criterion. This approach allows taking into account the set of private quality criteria and provides the best value among the worst normalized indicators. This method provides a balance between various aspects of security, helping to find the optimal solution when designing and evaluating information protection systems. The proposed methodological approaches and practical recommendations are of great importance for increasing the effectiveness of information protection systems. They allow not only to assess the current state of security, but also to predict possible risks, which is important for ensuring the long-term stability of information systems.
- Open Access
- 30 June 2024
- Published by University of Defence in Advances in Military Technology
- Vol. 19 (1) , 149-164
Time Aspect of Insider Threat Mitigation
The article reveals the problem of mitigating an insider threat by creating a time-balanced security system in an organization. Based on Markov chain, the authors propose a basic model of interaction in an “organization – insider” system. The article analytically defines a ratio between the time of an insider attack and the time during which the organization’s security system can neutralize it. The authors propose a concept of a multi-level system of organization protection, which takes into account the involved resources and practical skills of employees, as well as security services. At the end of the article, it is concluded that the proposed concept of the organization’s protection system will be effective against potential insider attacks.
- 30 June 2024
- Published by University of Defence in Advances in Military Technology
- Vol. 19 (1) , 149-164
Open AccessTime Aspect of Insider Threat Mitigation
The article reveals the problem of mitigating an insider threat by creating a time-balanced security system in an organization. Based on Markov chain, the authors propose a basic model of interaction in an “organization – insider” system. The article analytically defines a ratio between the time of an insider attack and the time during which the organization’s security system can neutralize it. The authors propose a concept of a multi-level system of organization protection, which takes into account the involved resources and practical skills of employees, as well as security services. At the end of the article, it is concluded that the proposed concept of the organization’s protection system will be effective against potential insider attacks.
- Open Access
- 29 June 2023
- Published by Private Company Technology Center
MODELS OF SOCIO-CYBER-PHYSICAL SYSTEMS SECURITY
The development of technologies and computing resources has not only expanded the range of digital services in all spheres of human activity, but also determined the range of targeted cyber attacks. Targeted attacks are aimed at destroying not only the business structure, but also its individual components that determine critical business processes. The continuity of such business processes is a critical component of any company, organization or enterprise of any form of ownership, which has a critical impact on making a profit or organizing production processes. The proposed concept of determining the security level of critical business processes is based on the need to use multiloop information security systems. This makes it possible to ensure the continuity of critical business processes through a timely objective assessment of the level of security and the timely formation of preventive measures. This approach is based on the proposed rules for determining the reach of a given security level, based on assessments of the integrity, availability and confidentiality of information arrays, as well as computer equipment for different points of the organization's business processes. The issues of applying situational management methods to ensure the safe functioning of objects of socio-cyberphysical systems, logical and transformational rules that form the foundation for building a situational type cybersecurity management system are considered. One of the main tasks of systems of this type is described – the task of replenishing the description of the situation. The use of pseudophysical logics, various types of pseudophysical logics, the method of their construction and their interconnection are proposed. Particular attention is paid to causal pseudophysical logic, as the least developed for the purposes of ensuring cybersecurity. The formation of smart technologies, as a rule, uses the wireless standards of communication channels IEEE 802.11X, IEEE 802.15.4, IEEE 802.16, which use only authentication protocols and privacy mechanisms that are formed on the basis of symmetric algorithms. In the conditions of the post-quantum period (the appearance of a full-scale quantum computer), the stability of such algorithms is questioned. Such systems, as a rule, are formed on the basis of the synthesis of socio-cyber-physical systems and cloud technologies, which simplifies the implementation of Advanced Persistent Threat attacks, both on the internal loop of control systems and on the external one. The proposed creation of multi-circuit information protection systems allows for an objective assessment of the flow state of the system as a whole and the formation of preventive measures against cyber threats. In the thied chapter, models of probable threats and information protection in public networks are proposed. The most general model of the formal description of the protection system is the model of the security system with full overlap, in which a complete list of protection objects and threats to information is determined, and means of ensuring security are determined from the point of view of their effectiveness and contribution to ensuring the security of the entire telecommunications system. It is also shown that the combination of four models (M1, M2, M3, M4) in various variants provides wide opportunities for modeling various known types of threats and their implementation. However, in connection with the continuity of the process of developing new and improving existing methods and means of implementing threats, it is necessary to use such approaches to ensuring information protection that allow detecting and preventing threats of unknown types and carrying out dynamic correction of protection behavior, adapting it to specific application conditions. The M5 basic model is described, which enables continuous refinement of threat classes and response measures, and continuous training of the adaptive component of the CSI, which, in turn, detects and prevents threats of unknown types. The M6 basic model is introduced with the aim of obtaining higher security due to the presence of a special module of internal diagnostics that diagnoses the entire protection system, decides on the correction of the SHI behavior algorithm, and makes it possible to achieve SHI fault tolerance; a special module that diagnoses the communication channel with subsequent changes in the level of protection, allows to achieve the adaptability of the SHI. The fourth chapter is deal with the development of cryptographic primitives based on cellular automata. The definition of a cellular automaton is given and the elementary rules of intercellular interaction are described. A number of generators of pseudorandom binary sequences have been developed based on a combination of elementary rules of intercellular interaction, as well as cell interaction according to a rule of our own development. In the “cryptographic sponge” architecture, a cryptographic hashing function with a shuffling function based on cellular automata was developed and its statistical characteristics and avalanche effect were investigated. A block cipher in the SP-network architecture is constructed, in which cellular automata are used to deploy the key, and the encryption process is based on elementary procedures of replacement and permutation. Substitution blocks are used from the well-known AES cipher, a description of a stream cipher is given, where a personal computer keyboard and mouse are used as the initial entropy. Random data received from the specified devices is processed by a proprietary hashing function based on a "cryptographic sponge". All developed cryptographic functions and primitives demonstrated good statistical characteristics and avalanche properties. The fifth chapter proposes a methodology for analyzing the quality of the mechanism for validating the identified vulnerabilities of a corporate network,...
- 29 June 2023
- Published by Private Company Technology Center
Open AccessMODELS OF SOCIO-CYBER-PHYSICAL SYSTEMS SECURITY
The development of technologies and computing resources has not only expanded the range of digital services in all spheres of human activity, but also determined the range of targeted cyber attacks. Targeted attacks are aimed at destroying not only the business structure, but also its individual components that determine critical business processes. The continuity of such business processes is a critical component of any company, organization or enterprise of any form of ownership, which has a critical impact on making a profit or organizing production processes. The proposed concept of determining the security level of critical business processes is based on the need to use multiloop information security systems. This makes it possible to ensure the continuity of critical business processes through a timely objective assessment of the level of security and the timely formation of preventive measures. This approach is based on the proposed rules for determining the reach of a given security level, based on assessments of the integrity, availability and confidentiality of information arrays, as well as computer equipment for different points of the organization's business processes. The issues of applying situational management methods to ensure the safe functioning of objects of socio-cyberphysical systems, logical and transformational rules that form the foundation for building a situational type cybersecurity management system are considered. One of the main tasks of systems of this type is described – the task of replenishing the description of the situation. The use of pseudophysical logics, various types of pseudophysical logics, the method of their construction and their interconnection are proposed. Particular attention is paid to causal pseudophysical logic, as the least developed for the purposes of ensuring cybersecurity. The formation of smart technologies, as a rule, uses the wireless standards of communication channels IEEE 802.11X, IEEE 802.15.4, IEEE 802.16, which use only authentication protocols and privacy mechanisms that are formed on the basis of symmetric algorithms. In the conditions of the post-quantum period (the appearance of a full-scale quantum computer), the stability of such algorithms is questioned. Such systems, as a rule, are formed on the basis of the synthesis of socio-cyber-physical systems and cloud technologies, which simplifies the implementation of Advanced Persistent Threat attacks, both on the internal loop of control systems and on the external one. The proposed creation of multi-circuit information protection systems allows for an objective assessment of the flow state of the system as a whole and the formation of preventive measures against cyber threats. In the thied chapter, models of probable threats and information protection in public networks are proposed. The most general model of the formal description of the protection system is the model of the security system with full overlap, in which a complete list of protection objects and threats to information is determined, and means of ensuring security are determined from the point of view of their effectiveness and contribution to ensuring the security of the entire telecommunications system. It is also shown that the combination of four models (M1, M2, M3, M4) in various variants provides wide opportunities for modeling various known types of threats and their implementation. However, in connection with the continuity of the process of developing new and improving existing methods and means of implementing threats, it is necessary to use such approaches to ensuring information protection that allow detecting and preventing threats of unknown types and carrying out dynamic correction of protection behavior, adapting it to specific application conditions. The M5 basic model is described, which enables continuous refinement of threat classes and response measures, and continuous training of the adaptive component of the CSI, which, in turn, detects and prevents threats of unknown types. The M6 basic model is introduced with the aim of obtaining higher security due to the presence of a special module of internal diagnostics that diagnoses the entire protection system, decides on the correction of the SHI behavior algorithm, and makes it possible to achieve SHI fault tolerance; a special module that diagnoses the communication channel with subsequent changes in the level of protection, allows to achieve the adaptability of the SHI. The fourth chapter is deal with the development of cryptographic primitives based on cellular automata. The definition of a cellular automaton is given and the elementary rules of intercellular interaction are described. A number of generators of pseudorandom binary sequences have been developed based on a combination of elementary rules of intercellular interaction, as well as cell interaction according to a rule of our own development. In the “cryptographic sponge” architecture, a cryptographic hashing function with a shuffling function based on cellular automata was developed and its statistical characteristics and avalanche effect were investigated. A block cipher in the SP-network architecture is constructed, in which cellular automata are used to deploy the key, and the encryption process is based on elementary procedures of replacement and permutation. Substitution blocks are used from the well-known AES cipher, a description of a stream cipher is given, where a personal computer keyboard and mouse are used as the initial entropy. Random data received from the specified devices is processed by a proprietary hashing function based on a "cryptographic sponge". All developed cryptographic functions and primitives demonstrated good statistical characteristics and avalanche properties. The fifth chapter proposes a methodology for analyzing the quality of the mechanism for validating the identified vulnerabilities of a corporate network,...
- Open Access
- 24 February 2023
- Published by State University "Kyiv Aviation Institute" in Ukrainian Information Security Research Journal
- Vol. 24 (3) , 128-136
УДОСКОНАЛЕННЯ МЕТОДУ ПІДВИЩЕННЯ ЗАВАДОСТІЙКОСТІ СИСТЕМ ВИЯВЛЕННЯ СИГНАЛІВ ЗАСОБІВ НЕГЛАСНОГО ЗДОБУТТЯ ІНФОРМАЦІЇ
In the process of detection and recognition of signals of random signals, which can be signals of digital means of covert information acquisition, an urgent issue is the improvement of immunity. The article examines the features of using low-pass filters. Low-pass filters with quadratic and linear dependence of the response on the input signal. The principle of operation of filters is that the process of summation is performed. At the same time, the useful signal is summarized coherently, and the interference signal is summed up incoherently. The useful signal increases and the interference signal decreases. When a rectangular pulse is applied to the input of the linear and quadratic filters, which imitates the signals of modern digital means of covert information acquisition, the parameters of the output signals necessary for further use are determined: mathematical expectation, correlation coefficient, dispersion, root mean square deviation, ratio of values signals to the amount of interference in temporal and spectral view. Calculated winning ratio. This coefficient shows the efficiency of using low-pass filters. Graphs of the envelope voltage at the output of an ideal bandpass filter when a rectangular pulse of different duration is applied to the input– a signal that can be a signal of covert information acquisition means. Modeling of the filtering process with different correlation coefficients was carried out. The simulation results confirmed the possibility of identifying the signal of means of covert information acquisition by the method of determining the two-dimensional probability density of the interference signal against the background of the general signal. The process of improving the immunity of the system as a whole is being studied. The improvement of the signal detection method was carried out due to the use of low-frequency narrow-band filters in the process of signal processing, which allows to achieve a 23% increase in the immunity of the system for identifying and recognizing signals of digital means of covert information acquisition.
- 24 February 2023
- Published by State University "Kyiv Aviation Institute" in Ukrainian Information Security Research Journal
- Vol. 24 (3) , 128-136
Open AccessУДОСКОНАЛЕННЯ МЕТОДУ ПІДВИЩЕННЯ ЗАВАДОСТІЙКОСТІ СИСТЕМ ВИЯВЛЕННЯ СИГНАЛІВ ЗАСОБІВ НЕГЛАСНОГО ЗДОБУТТЯ ІНФОРМАЦІЇ
In the process of detection and recognition of signals of random signals, which can be signals of digital means of covert information acquisition, an urgent issue is the improvement of immunity. The article examines the features of using low-pass filters. Low-pass filters with quadratic and linear dependence of the response on the input signal. The principle of operation of filters is that the process of summation is performed. At the same time, the useful signal is summarized coherently, and the interference signal is summed up incoherently. The useful signal increases and the interference signal decreases. When a rectangular pulse is applied to the input of the linear and quadratic filters, which imitates the signals of modern digital means of covert information acquisition, the parameters of the output signals necessary for further use are determined: mathematical expectation, correlation coefficient, dispersion, root mean square deviation, ratio of values signals to the amount of interference in temporal and spectral view. Calculated winning ratio. This coefficient shows the efficiency of using low-pass filters. Graphs of the envelope voltage at the output of an ideal bandpass filter when a rectangular pulse of different duration is applied to the input– a signal that can be a signal of covert information acquisition means. Modeling of the filtering process with different correlation coefficients was carried out. The simulation results confirmed the possibility of identifying the signal of means of covert information acquisition by the method of determining the two-dimensional probability density of the interference signal against the background of the general signal. The process of improving the immunity of the system as a whole is being studied. The improvement of the signal detection method was carried out due to the use of low-frequency narrow-band filters in the process of signal processing, which allows to achieve a 23% increase in the immunity of the system for identifying and recognizing signals of digital means of covert information acquisition.