Hairen Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hairen Wang has a total of 169 co-authors. Here are the top co-authors by number of shared publications:
Ming Liang
National Optical Astronomy Observatory (NSF’s National Optical-Infrared Astronomy Research Laboratory)
7 shared publications- Hongfei Zhang
University of Science and Technology of China
6 shared publications - Lulu Fan
University of Science and Technology of China
6 shared publications Yingxi Zuo
Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing 210023, People’s Republic of China
6 shared publications- Bin Li
Purple Mountain Observatory, Chinese Academy of Sciences
5 shared publications - Ji-An Jiang
University of Science and Technology of China
5 shared publications
Latest Publications
- Open Access
- 6 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A88
Astrometric calibration for mosaic CCDs: A full field of view joint solution approach
Context . Astrometric calibration of mosaic CCDs can be performed either through a full field of view (FoV) joint solution (JS), which solves all CCDs simultaneously, or through a per CCD solution (PS), which calibrates each CCD independently. At present, the PS is the most commonly adopted approach, although it is not necessarily optimal. On the one hand, the projection point, plate scale, and distortion derived from the PS do not fully represent the true optical properties of the telescope, and their impact on astrometric precision remains unclear. On the other hand, accurate full-FoV joint pixel coordinates (JPCs), a unified coordinate system for all CCDs derived from the JS, are essential for subsequent data processing, such as full-FoV stellar flat-field fitting and sky background modeling. Aims . This work aims to develop a full-FoV joint astrometric calibration method for mosaic CCDs and assess whether it offers superior astrometric precision over the PS. Additionally, we seek to test the stability of JPC to validate the CCD mosaic geometry measured in the laboratory. Methods . We propose a joint astrometric calibration method for mosaic CCDs that employs an alternating minimization algorithm to iteratively solve for both the mosaic geometry between each CCD and the plate model. An accurate plate model is critical for the JS. We used simulations based on the typical distortion-corrected optical design to find the proper plate model. Results . Simulations show that even with only 0.1% distortion, conventional third- and fourth-order x, y polynomial models are insufficient for fitting the plate model. The JS plate model must include radial terms of the form r = x 2 + y 2 . We tested the proposed JS method using data from the Wide Field Survey Telescope (WFST). The results demonstrate that the JS achieves slightly better astrometric precision than the PS. After averaging the positional residuals over all the included exposures as a function of pixel position, an unmodeled distortion of ∼15 mas emerged, likely due to the discontinuity in the distortion pattern across the four-corner CCDs. The relative translation and rotation precisions between CCDs reach 0.056 pixels and 1.37, respectively. Moreover, CCD gap sizes derived from the JPCs are consistent with measurements from the laboratory. Conclusions . We developed a joint astrometric calibration method for mosaic CCDs. Our results indicate that radial terms are essential in the plate model for wide FoV telescopes with distortion-corrected design. The averaged 2D positional residual map reveals small-scale unmodeled discontinuity in the distortion pattern across CCDs, highlighting the complexity of high-precision astrometric calibration of mosaic CCDs. The mosaic geometry derived from the joint calibration aligns well with measurements from the laboratory, confirming the robustness and precision of our method. This work provides a new perspective on the astrometric calibration of mosaic CCDs.
- 6 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A88
Open AccessAstrometric calibration for mosaic CCDs: A full field of view joint solution approach
Context . Astrometric calibration of mosaic CCDs can be performed either through a full field of view (FoV) joint solution (JS), which solves all CCDs simultaneously, or through a per CCD solution (PS), which calibrates each CCD independently. At present, the PS is the most commonly adopted approach, although it is not necessarily optimal. On the one hand, the projection point, plate scale, and distortion derived from the PS do not fully represent the true optical properties of the telescope, and their impact on astrometric precision remains unclear. On the other hand, accurate full-FoV joint pixel coordinates (JPCs), a unified coordinate system for all CCDs derived from the JS, are essential for subsequent data processing, such as full-FoV stellar flat-field fitting and sky background modeling. Aims . This work aims to develop a full-FoV joint astrometric calibration method for mosaic CCDs and assess whether it offers superior astrometric precision over the PS. Additionally, we seek to test the stability of JPC to validate the CCD mosaic geometry measured in the laboratory. Methods . We propose a joint astrometric calibration method for mosaic CCDs that employs an alternating minimization algorithm to iteratively solve for both the mosaic geometry between each CCD and the plate model. An accurate plate model is critical for the JS. We used simulations based on the typical distortion-corrected optical design to find the proper plate model. Results . Simulations show that even with only 0.1% distortion, conventional third- and fourth-order x, y polynomial models are insufficient for fitting the plate model. The JS plate model must include radial terms of the form r = x 2 + y 2 . We tested the proposed JS method using data from the Wide Field Survey Telescope (WFST). The results demonstrate that the JS achieves slightly better astrometric precision than the PS. After averaging the positional residuals over all the included exposures as a function of pixel position, an unmodeled distortion of ∼15 mas emerged, likely due to the discontinuity in the distortion pattern across the four-corner CCDs. The relative translation and rotation precisions between CCDs reach 0.056 pixels and 1.37, respectively. Moreover, CCD gap sizes derived from the JPCs are consistent with measurements from the laboratory. Conclusions . We developed a joint astrometric calibration method for mosaic CCDs. Our results indicate that radial terms are essential in the plate model for wide FoV telescopes with distortion-corrected design. The averaged 2D positional residual map reveals small-scale unmodeled discontinuity in the distortion pattern across CCDs, highlighting the complexity of high-precision astrometric calibration of mosaic CCDs. The mosaic geometry derived from the joint calibration aligns well with measurements from the laboratory, confirming the robustness and precision of our method. This work provides a new perspective on the astrometric calibration of mosaic CCDs.
- Open Access
- 5 November 2026
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 1011 (2) , L50
WFST Follow-up of S251112cm: Searching for an Optical Counterpart to a Subsolar-mass Compact-binary Merger Candidate
Electromagnetic counterparts to gravitational-wave (GW) sources probe the properties, environments, and evolution of compact-object mergers. S251112cm belongs to an emerging class of GW candidates with possible subsolar-mass components. We present an optical counterpart search for S251112cm with the Wide Field Survey Telescope (WFST). The observations began 20.2 hr after the GW trigger and continued for 3 nights, covering approximately 780 deg 2 and 51% of the localization probability in the updated skymap. We searched for newly emerging, rapidly evolving, off-nuclear optical transients and identified four candidates whose host-galaxy distances are broadly consistent with the GW distance estimate. However, all four evolve substantially more slowly than AT 2017gfo, ruling out an AT 2017gfo-like origin and disfavoring their association with S251112cm as rapidly evolving kilonova counterparts. Combining WFST and DECam observations increases the covered localization probability to approximately 67%. Conditional on the counterpart lying within this footprint, we constrain a grid of binary-neutron-star kilonova models. For viewing angles θ obs < 60 ∘ , with the other parameters fixed to the best-fitting values for AT 2017gfo, models with dynamical ejecta mass M dyn ≳ 0.01 M ⊙ or wind ejecta mass M wind ≳ 0.05 M ⊙ are disfavored over most of the covered GW probability. Beyond kilonova models, our phenomenological analysis constrains rapidly evolving optical transients with T rise,1/2 ≤ 2 days to peak absolute magnitudes fainter than approximately −13 mag. To our knowledge, WFST provides the strongest optical constraints to date in the northern sky on possible rapidly evolving counterparts to this new class of GW candidates involving subsolar-mass compact objects. The comparable depths and complementary sky coverage of WFST and DECam extend these constraints across a larger fraction of the localization region at similar sensitivity.
- 5 November 2026
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 1011 (2) , L50
Open AccessWFST Follow-up of S251112cm: Searching for an Optical Counterpart to a Subsolar-mass Compact-binary Merger Candidate
Electromagnetic counterparts to gravitational-wave (GW) sources probe the properties, environments, and evolution of compact-object mergers. S251112cm belongs to an emerging class of GW candidates with possible subsolar-mass components. We present an optical counterpart search for S251112cm with the Wide Field Survey Telescope (WFST). The observations began 20.2 hr after the GW trigger and continued for 3 nights, covering approximately 780 deg 2 and 51% of the localization probability in the updated skymap. We searched for newly emerging, rapidly evolving, off-nuclear optical transients and identified four candidates whose host-galaxy distances are broadly consistent with the GW distance estimate. However, all four evolve substantially more slowly than AT 2017gfo, ruling out an AT 2017gfo-like origin and disfavoring their association with S251112cm as rapidly evolving kilonova counterparts. Combining WFST and DECam observations increases the covered localization probability to approximately 67%. Conditional on the counterpart lying within this footprint, we constrain a grid of binary-neutron-star kilonova models. For viewing angles θ obs < 60 ∘ , with the other parameters fixed to the best-fitting values for AT 2017gfo, models with dynamical ejecta mass M dyn ≳ 0.01 M ⊙ or wind ejecta mass M wind ≳ 0.05 M ⊙ are disfavored over most of the covered GW probability. Beyond kilonova models, our phenomenological analysis constrains rapidly evolving optical transients with T rise,1/2 ≤ 2 days to peak absolute magnitudes fainter than approximately −13 mag. To our knowledge, WFST provides the strongest optical constraints to date in the northern sky on possible rapidly evolving counterparts to this new class of GW candidates involving subsolar-mass compact objects. The comparable depths and complementary sky coverage of WFST and DECam extend these constraints across a larger fraction of the localization region at similar sensitivity.
- Open Access
- 6 July 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 712, A85
Search for L4 Earth Trojan asteroids with the 2.5-meter Wide Field Survey Telescope
Earth Trojan asteroids (ETAs) are a mysterious population, and dynamically stable ETAs — if primordial — could be "living fossils" of the early Solar System. To date, there are only two known ETAs, and both are temporary ETAs. The aim of our survey is to discover new temporary or stable ETAs; in the absence of detections, we derive upper limits on the population of stable ETAs. We conducted the largest wide-area survey of the Earth's L4 Lagrange point region so far using the Wide Field Survey Telescope. We covered about 236.74 deg2, which corresponds to 33.24% of the probability coverage for sky regions where dynamically stable L4 ETAs are likely to reside. No new ETAs were detected in our survey. We place a cumulative upper limit of N(H<19.1) łesssim 19 on the stable population of objects larger than ∼520 m (for an assumed albedo of 0.15). This represents the most stringent constraint on the ETA population to date.
- 6 July 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 712, A85
Open AccessSearch for L4 Earth Trojan asteroids with the 2.5-meter Wide Field Survey Telescope
Earth Trojan asteroids (ETAs) are a mysterious population, and dynamically stable ETAs — if primordial — could be "living fossils" of the early Solar System. To date, there are only two known ETAs, and both are temporary ETAs. The aim of our survey is to discover new temporary or stable ETAs; in the absence of detections, we derive upper limits on the population of stable ETAs. We conducted the largest wide-area survey of the Earth's L4 Lagrange point region so far using the Wide Field Survey Telescope. We covered about 236.74 deg2, which corresponds to 33.24% of the probability coverage for sky regions where dynamically stable L4 ETAs are likely to reside. No new ETAs were detected in our survey. We place a cumulative upper limit of N(H<19.1) łesssim 19 on the stable population of objects larger than ∼520 m (for an assumed albedo of 0.15). This represents the most stringent constraint on the ETA population to date.
- Open Access
- 16 March 2026
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 1000 (1) , L20
Illuminating the Mass Gap through a Deep Optical Constraint on the Neutron Star Merger Candidate S250206dm
The gravitational wave (GW) event S250206dm, as the first well-localized neutron star (NS) merger candidate potentially located in the mass gap, presented a unique opportunity to probe the electromagnetic signatures from such a system. Here we report a deep, multiband search with the new 2.5 m Wide Field Survey Telescope (WFST), covering ∼64% of the localization region up to a 5 σ limiting magnitude of 23 mag. In total, 12 potential candidates have been identified, but none of them are likely related to S250206dm. This nondetection provides the most stringent constraint to date on any associated kilonova. Crucially, an AT 2017gfo-like event at 269 Mpc can be excluded only by WFST observations. Based on ejecta mass limits, a NS-black hole with a large mass ratio ( Q ≳ 3.2) is disfavored. This optically derived constraint on the mass ratio reaches, for the first time, a precision comparable to that inferred from the GW signal. This work presents the best observation of this type of event until now, and demonstrates the power of rapid, deep follow-up observations to constrain the properties of compact binary progenitors, offering key insights into the constituents of the mass gap.
- 16 March 2026
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 1000 (1) , L20
Open AccessIlluminating the Mass Gap through a Deep Optical Constraint on the Neutron Star Merger Candidate S250206dm
The gravitational wave (GW) event S250206dm, as the first well-localized neutron star (NS) merger candidate potentially located in the mass gap, presented a unique opportunity to probe the electromagnetic signatures from such a system. Here we report a deep, multiband search with the new 2.5 m Wide Field Survey Telescope (WFST), covering ∼64% of the localization region up to a 5 σ limiting magnitude of 23 mag. In total, 12 potential candidates have been identified, but none of them are likely related to S250206dm. This nondetection provides the most stringent constraint to date on any associated kilonova. Crucially, an AT 2017gfo-like event at 269 Mpc can be excluded only by WFST observations. Based on ejecta mass limits, a NS-black hole with a large mass ratio ( Q ≳ 3.2) is disfavored. This optically derived constraint on the mass ratio reaches, for the first time, a precision comparable to that inferred from the GW signal. This work presents the best observation of this type of event until now, and demonstrates the power of rapid, deep follow-up observations to constrain the properties of compact binary progenitors, offering key insights into the constituents of the mass gap.
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 5292-5307
A State-Threshold Sliding Mode Control With Improved Extended State Observer for PMSM Speed Control
This paper proposes a novel state-threshold-based sliding mode reaching law integrated with an improved extended state observer (IESO). The method aims to enhance the dynamic response performance of a permanent magnet synchronous motor (PMSM) under load disturbances and model mismatch. First, a state-threshold-based reaching law (STRL) is developed for sliding mode control (SMC). This threshold-based strategy allows the proposed STRL to respond rapidly to large disturbances while maintaining high sensitivity to small disturbances. This design effectively suppresses control chattering and enhances system robustness against disturbances. Then, an IESO is designed to estimate the total disturbances to further enhance dynamic response capability. The IESO can also reduce the impact of sensor noise by estimating the disturbances and adaptively adjusting the observer gain based on estimated disturbances. By integrating the advantages of STRL and IESO, the proposed STRL + IESO method enhances disturbance rejection capability and preserves a rapid dynamic response. Experimental validation on the PMSM speed control loop confirms its effectiveness, showing improved robustness and faster convergence.
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 5292-5307
A State-Threshold Sliding Mode Control With Improved Extended State Observer for PMSM Speed Control
This paper proposes a novel state-threshold-based sliding mode reaching law integrated with an improved extended state observer (IESO). The method aims to enhance the dynamic response performance of a permanent magnet synchronous motor (PMSM) under load disturbances and model mismatch. First, a state-threshold-based reaching law (STRL) is developed for sliding mode control (SMC). This threshold-based strategy allows the proposed STRL to respond rapidly to large disturbances while maintaining high sensitivity to small disturbances. This design effectively suppresses control chattering and enhances system robustness against disturbances. Then, an IESO is designed to estimate the total disturbances to further enhance dynamic response capability. The IESO can also reduce the impact of sensor noise by estimating the disturbances and adaptively adjusting the observer gain based on estimated disturbances. By integrating the advantages of STRL and IESO, the proposed STRL + IESO method enhances disturbance rejection capability and preserves a rapid dynamic response. Experimental validation on the PMSM speed control loop confirms its effectiveness, showing improved robustness and faster convergence.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (7) , 4133-4142
Toward a Phase Adaptive Stabilization System for Next-Generation Single-Dish Sub-mm Telescope II: Closed-Loop Measurement and Correction, Long-Term Measurement Without Systematic Errors
The phase adaptive stabilization system (PASS), functioning as an adaptive optics system of radio frequency (RF), is a key technology for achieving the next generation of single-dish submillimeter-wave (sub-mm) telescopes. However, PASS has not yet achieved a closed loop of measurement and correction in real-time. Furthermore, the presence of systematic errors hinders the system’s practical implementation. Here we have successfully established a closed-loop PASS both in laboratory and outfield. The PASS has been experimentally proven to be sufficiently accurate to measure and correct, in real-time, reflective-surface deformations to the level of 10 $\rm \mu m$ , which represents the best experimental result to date. Moreover, a clever way to eliminate systematic errors has been proposed. The experimental results demonstrate that the PASS is able to measure and correct reflective-surface deformations without systematic errors for a long period of time. In summary, a serious barrier to the PASS’s practical implementation has been removed.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (7) , 4133-4142
Toward a Phase Adaptive Stabilization System for Next-Generation Single-Dish Sub-mm Telescope II: Closed-Loop Measurement and Correction, Long-Term Measurement Without Systematic Errors
The phase adaptive stabilization system (PASS), functioning as an adaptive optics system of radio frequency (RF), is a key technology for achieving the next generation of single-dish submillimeter-wave (sub-mm) telescopes. However, PASS has not yet achieved a closed loop of measurement and correction in real-time. Furthermore, the presence of systematic errors hinders the system’s practical implementation. Here we have successfully established a closed-loop PASS both in laboratory and outfield. The PASS has been experimentally proven to be sufficiently accurate to measure and correct, in real-time, reflective-surface deformations to the level of 10 $\rm \mu m$ , which represents the best experimental result to date. Moreover, a clever way to eliminate systematic errors has been proposed. The experimental results demonstrate that the PASS is able to measure and correct reflective-surface deformations without systematic errors for a long period of time. In summary, a serious barrier to the PASS’s practical implementation has been removed.
- Open Access
- 21 November 2024
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 976 (2) , L20
GRB 240529A: A Tale of Two Shocks
Thanks to the rapidly increasing time-domain facilities, we are entering a golden era of research on gamma-ray bursts (GRBs). In this Letter, we report our observations of GRB 240529A with the Burst Optical Observer and Transient Exploring System, the 1.5 m telescope at Observatorio de Sierra Nevada, the 2.5 m Wide Field Survey Telescope of China, the Large Binocular Telescope, and the Telescopio Nazionale Galileo. The prompt emission of GRB 240529A shows two comparable energetic episodes separated by a quiescence time of roughly 400 s. Combining all available data on the GRB Coordinates Network, we reveal the simultaneous apparent X-ray plateau and optical rebrightening around 103–104 s after the burst. Rather than the energy injection from the magnetar as widely invoked for similar GRBs, the multiwavelength emissions could be better explained as two shocks launched from the central engine separately. The optical peak time and our numerical modeling suggest that the initial bulk Lorentz factor of the later shock is roughly 50, which indicates that the later jet should be accretion driven and have a higher mass loading than a typical one. The quiescence time between the two prompt emission episodes may be caused by the transition between different accretion states of a central magnetar or black hole, or the fallback accretion process. A sample of similar bursts with multiple emission episodes in the prompt phase and sufficient follow-up could help to probe the underlying physics of GRB central engines.
- 21 November 2024
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 976 (2) , L20
Open AccessGRB 240529A: A Tale of Two Shocks
Thanks to the rapidly increasing time-domain facilities, we are entering a golden era of research on gamma-ray bursts (GRBs). In this Letter, we report our observations of GRB 240529A with the Burst Optical Observer and Transient Exploring System, the 1.5 m telescope at Observatorio de Sierra Nevada, the 2.5 m Wide Field Survey Telescope of China, the Large Binocular Telescope, and the Telescopio Nazionale Galileo. The prompt emission of GRB 240529A shows two comparable energetic episodes separated by a quiescence time of roughly 400 s. Combining all available data on the GRB Coordinates Network, we reveal the simultaneous apparent X-ray plateau and optical rebrightening around 103–104 s after the burst. Rather than the energy injection from the magnetar as widely invoked for similar GRBs, the multiwavelength emissions could be better explained as two shocks launched from the central engine separately. The optical peak time and our numerical modeling suggest that the initial bulk Lorentz factor of the later shock is roughly 50, which indicates that the later jet should be accretion driven and have a higher mass loading than a typical one. The quiescence time between the two prompt emission episodes may be caused by the transition between different accretion states of a central magnetar or black hole, or the fallback accretion process. A sample of similar bursts with multiple emission episodes in the prompt phase and sufficient follow-up could help to probe the underlying physics of GRB central engines.
- Open Access
GRB 240529A: A Tale of Two Shocks
Thanks to the rapidly increasing time-domain facilities, we are entering a golden era of research on gamma-ray bursts (GRBs). In this Letter, we report our observations of GRB 240529A with the Burst Optical Observer and Transient Exploring System, the 1.5-meter telescope at Observatorio Sierra Nevada, the 2.5-meter Wide Field Survey Telescope of China, the Large Binocular Telescope, and the Telescopio Nazionale Galileo. The prompt emission of GRB 240529A shows two comparable energetic episodes separated by a quiescence time of roughly 400 s. Combining all available data on the GRB Coordinates Network, we reveal the simultaneous apparent X-ray plateau and optical re-brightening around $10^3-10^4$ s after the burst. Rather than the energy injection from the magnetar as widely invoked for similar GRBs, the multi-wavelength emissions could be better explained as two shocks launched from the central engine separately. The optical peak time and our numerical modeling suggest that the initial bulk Lorentz factor of the later shock is roughly 50, which indicates that the later jet should be accretion-driven and have a higher mass loading than a typical one. The quiescence time between the two prompt emission episodes may be caused by the transition between different accretion states of a central magnetar or black hole, or the fall-back accretion process. A sample of similar bursts with multiple emission episodes in the prompt phase and sufficient follow-up could help to probe the underlying physics of GRB central engines.Open AccessGRB 240529A: A Tale of Two Shocks
Thanks to the rapidly increasing time-domain facilities, we are entering a golden era of research on gamma-ray bursts (GRBs). In this Letter, we report our observations of GRB 240529A with the Burst Optical Observer and Transient Exploring System, the 1.5-meter telescope at Observatorio Sierra Nevada, the 2.5-meter Wide Field Survey Telescope of China, the Large Binocular Telescope, and the Telescopio Nazionale Galileo. The prompt emission of GRB 240529A shows two comparable energetic episodes separated by a quiescence time of roughly 400 s. Combining all available data on the GRB Coordinates Network, we reveal the simultaneous apparent X-ray plateau and optical re-brightening around $10^3-10^4$ s after the burst. Rather than the energy injection from the magnetar as widely invoked for similar GRBs, the multi-wavelength emissions could be better explained as two shocks launched from the central engine separately. The optical peak time and our numerical modeling suggest that the initial bulk Lorentz factor of the later shock is roughly 50, which indicates that the later jet should be accretion-driven and have a higher mass loading than a typical one. The quiescence time between the two prompt emission episodes may be caused by the transition between different accretion states of a central magnetar or black hole, or the fall-back accretion process. A sample of similar bursts with multiple emission episodes in the prompt phase and sufficient follow-up could help to probe the underlying physics of GRB central engines. - 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Toward a Phase Adaptive Stabilization System for Next-Generation Single-Dish Sub-mm Telescope Part—I: Multipath Phase Measurements Based on Ultrastable Microwave Signal Distribution
Large-aperture, single-dish, submillimeter-wave (sub-mm) telescopes are important to our understanding of the universe, but it is a long-term outstanding challenge to make the single-dish sub-mm telescopes larger while keeping a high accuracy of their surfaces. A bottleneck in the context of the size and the operating wavelengths of such telescopes is the deterioration of wavefront errors (phase shift) due to the deformation of reflective surfaces. Here proposed is a phase adaptive stabilization system (PASS), functioning as adaptive optics system of radio frenquency, an essential tool for overcoming the challenge, which is based on a state-of-the-art ultra-stable microwave signal distribution (UMSD) technology. The UMSD system with a phase drift of less than 11 fsec rms over 600 sec, is specially proposed for the PASS, which is an innovation. The results of outfield experiments have shown that the PASS is sufficiently accurate to measure the changes in the excess path length down to the level of 20 μm, which is the highest accuracy reported up to now. Our study marks a major step towards the phase adaptive stabilization system.
- 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Toward a Phase Adaptive Stabilization System for Next-Generation Single-Dish Sub-mm Telescope Part—I: Multipath Phase Measurements Based on Ultrastable Microwave Signal Distribution
Large-aperture, single-dish, submillimeter-wave (sub-mm) telescopes are important to our understanding of the universe, but it is a long-term outstanding challenge to make the single-dish sub-mm telescopes larger while keeping a high accuracy of their surfaces. A bottleneck in the context of the size and the operating wavelengths of such telescopes is the deterioration of wavefront errors (phase shift) due to the deformation of reflective surfaces. Here proposed is a phase adaptive stabilization system (PASS), functioning as adaptive optics system of radio frenquency, an essential tool for overcoming the challenge, which is based on a state-of-the-art ultra-stable microwave signal distribution (UMSD) technology. The UMSD system with a phase drift of less than 11 fsec rms over 600 sec, is specially proposed for the PASS, which is an innovation. The results of outfield experiments have shown that the PASS is sufficiently accurate to measure the changes in the excess path length down to the level of 20 μm, which is the highest accuracy reported up to now. Our study marks a major step towards the phase adaptive stabilization system.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (1) , 225-235
Modeling and Analysis of the Active Surface System for the Large Single-Dish Sub-mm Telescope
Enlarging antenna diameter while maintaining accurate reflective surface is important in the development of next-generation single-dish sub-mm telescopes. In this paper, we propose an emulation and optimization method for the active surface system (EOMASS) for large single-dish sub-mm telescopes. The proposed method involves three main steps: (1) building an active surface system model (ASSM) based on the whole finite element model of the large single-dish sub-mm telescope, which includes main reflector, realistic adjustment models of actuators, backup structure and so on; (2) emulating the reflective surface deformation compensation under gravity based on the initial distribution of the actuators with the ASSM, in consideration of the manufacturing error of panels; and (3) further optimizing the number and distribution of actuators based on the illumination function, and predicting the performance of the sub-mm antenna due to the limited number of faulty actuators. As an application example, a 60 m single-dish sub-mm telescope is analyzed under gravity with the proposed EOMASS. The results demonstrate that the proposed EOMASS is an effective and advanced method, providing a feasible precision design of the active surface system for a large single-dish sub-mm telescope.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (1) , 225-235
Modeling and Analysis of the Active Surface System for the Large Single-Dish Sub-mm Telescope
Enlarging antenna diameter while maintaining accurate reflective surface is important in the development of next-generation single-dish sub-mm telescopes. In this paper, we propose an emulation and optimization method for the active surface system (EOMASS) for large single-dish sub-mm telescopes. The proposed method involves three main steps: (1) building an active surface system model (ASSM) based on the whole finite element model of the large single-dish sub-mm telescope, which includes main reflector, realistic adjustment models of actuators, backup structure and so on; (2) emulating the reflective surface deformation compensation under gravity based on the initial distribution of the actuators with the ASSM, in consideration of the manufacturing error of panels; and (3) further optimizing the number and distribution of actuators based on the illumination function, and predicting the performance of the sub-mm antenna due to the limited number of faulty actuators. As an application example, a 60 m single-dish sub-mm telescope is analyzed under gravity with the proposed EOMASS. The results demonstrate that the proposed EOMASS is an effective and advanced method, providing a feasible precision design of the active surface system for a large single-dish sub-mm telescope.