Jiangtao Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jiangtao Su has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Jun Liu
Hangzhou Dianzi University
3 shared publications - Haijun Gao
Ministry of Education Key Laboratory of RF Circuits and Systems, Hangzhou Dianzi University, Hangzhou 310018, China
2 shared publications - Jie Wang
Hangzhou Dianzi University
2 shared publications - Lingling Sun
Hangzhou Dianzi University
2 shared publications - Xiwei Huang
Hangzhou Dianzi University
2 shared publications - Bin You
Hangzhou Dianzi University
1 shared publication
Latest Publications
- Open Access
- 30 August 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (9) , 1005
Characteristics Prediction and Optimization of GaN CAVET Using a Novel Physics-Guided Machine Learning Method
This paper presents a physics-guided machine learning (PGML) approach to model the I–V characteristics of GaN current aperture vertical field effect transistors (CAVET). By adopting the method of transfer learning and the shortcut structure, a physically guided neural network model is established. The shallow neural network with as the basis function is combined with a hypernetwork that dynamically generates its weight parameters. The influence of transconductance is added to the loss function. This model can synchronously predict the output and transfer characteristics of the device. Under the condition of small samples, the prediction error is controlled within 5%, and the value reaches above 0.99. The proposed PGML approach outperforms conventional approaches, ensuring physically meaningful and robust predictions for device optimization and circuit-level simulations.- 30 August 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (9) , 1005
Open AccessCharacteristics Prediction and Optimization of GaN CAVET Using a Novel Physics-Guided Machine Learning Method
This paper presents a physics-guided machine learning (PGML) approach to model the I–V characteristics of GaN current aperture vertical field effect transistors (CAVET). By adopting the method of transfer learning and the shortcut structure, a physically guided neural network model is established. The shallow neural network with as the basis function is combined with a hypernetwork that dynamically generates its weight parameters. The influence of transconductance is added to the loss function. This model can synchronously predict the output and transfer characteristics of the device. Under the condition of small samples, the prediction error is controlled within 5%, and the value reaches above 0.99. The proposed PGML approach outperforms conventional approaches, ensuring physically meaningful and robust predictions for device optimization and circuit-level simulations. - Open Access
- 30 June 2024
- Published by MDPI AG in Biosensors
- Vol. 14 (7) , 327
Biosensor with Microchannel for Broadband Dielectric Characterization of Nanoliter Cell Suspensions up to 110 GHz
Cell dielectric property measurement holds significant potential for application in cell detection and diagnosis due to its label-free and noninvasive nature. In this study, we developed a biosensor designed to measure the permittivity of liquid samples, particularly cell suspensions at the nanoliter scale, utilizing microwave and millimeter wave coplanar waveguides in conjunction with a microchannel. This biosensor facilitates the measurement of scattering parameters within a frequency domain ranging from 1 GHz to 110 GHz. The obtained scattering parameters are then converted into dielectric constants using specific algorithms. A cell capture structure within the microchannel ensures that cell suspensions remain stable within the measurement zone. The feasibility of this biosensor was confirmed by comparison with a commercial Keysight probe. We measured the dielectric constants of three different cell suspensions (HepG2, A549, MCF-7) using our biosensor. We also counted the number of cells captured in multiple measurements for each cell type and compared the corresponding changes in permittivity. The results indicated that the real part of the permittivity of HepG2 cells is 0.2–0.8 lower than that of the other two cell types. The difference between A549 and MCF-7 was relatively minor, only 0.2–0.4. The fluctuations in the dielectric spectrum caused by changes in cell numbers during measurements were smaller than the differences observed between different cell types. Thus, the sensor is suitable for measuring cell suspensions and can be utilized for label-free, noninvasive studies in identifying biological cell suspensions.
- 30 June 2024
- Published by MDPI AG in Biosensors
- Vol. 14 (7) , 327
Open AccessBiosensor with Microchannel for Broadband Dielectric Characterization of Nanoliter Cell Suspensions up to 110 GHz
Cell dielectric property measurement holds significant potential for application in cell detection and diagnosis due to its label-free and noninvasive nature. In this study, we developed a biosensor designed to measure the permittivity of liquid samples, particularly cell suspensions at the nanoliter scale, utilizing microwave and millimeter wave coplanar waveguides in conjunction with a microchannel. This biosensor facilitates the measurement of scattering parameters within a frequency domain ranging from 1 GHz to 110 GHz. The obtained scattering parameters are then converted into dielectric constants using specific algorithms. A cell capture structure within the microchannel ensures that cell suspensions remain stable within the measurement zone. The feasibility of this biosensor was confirmed by comparison with a commercial Keysight probe. We measured the dielectric constants of three different cell suspensions (HepG2, A549, MCF-7) using our biosensor. We also counted the number of cells captured in multiple measurements for each cell type and compared the corresponding changes in permittivity. The results indicated that the real part of the permittivity of HepG2 cells is 0.2–0.8 lower than that of the other two cell types. The difference between A549 and MCF-7 was relatively minor, only 0.2–0.4. The fluctuations in the dielectric spectrum caused by changes in cell numbers during measurements were smaller than the differences observed between different cell types. Thus, the sensor is suitable for measuring cell suspensions and can be utilized for label-free, noninvasive studies in identifying biological cell suspensions.
- Open Access
- 25 December 2023
- Published by MDPI AG in Micromachines
- Vol. 15 (1) , 46
Review of RF Device Behavior Model: Measurement Techniques, Applications, and Challenges
This review presents a concise overview of RF (radio frequency) power transistor behavior models, which is crucial for optimizing RF performance in high-frequency applications like wireless communication, radar, and satellites. The paper highlights the significance of accurate modeling in understanding transistor behavior and traces the evolution of behavior modeling techniques. Different behavior modeling strategies, such as LUT (look-up table) based models, polynomial equation-based models, and machine learning based models, are discussed along with their unique characteristics and modeling challenges. The review explores the difference between behavior models and the conventional empirical or physics-based modeling approaches, addressing the challenges of the accurate characterization of transistors at high frequencies and power levels. This paper concludes with an outlook of emerging trends, such as physical models combined with behavior models, shaping the future of RF power transistor modeling for more efficient communication systems.
- 25 December 2023
- Published by MDPI AG in Micromachines
- Vol. 15 (1) , 46
Open AccessReview of RF Device Behavior Model: Measurement Techniques, Applications, and Challenges
This review presents a concise overview of RF (radio frequency) power transistor behavior models, which is crucial for optimizing RF performance in high-frequency applications like wireless communication, radar, and satellites. The paper highlights the significance of accurate modeling in understanding transistor behavior and traces the evolution of behavior modeling techniques. Different behavior modeling strategies, such as LUT (look-up table) based models, polynomial equation-based models, and machine learning based models, are discussed along with their unique characteristics and modeling challenges. The review explores the difference between behavior models and the conventional empirical or physics-based modeling approaches, addressing the challenges of the accurate characterization of transistors at high frequencies and power levels. This paper concludes with an outlook of emerging trends, such as physical models combined with behavior models, shaping the future of RF power transistor modeling for more efficient communication systems.
- Open Access
- 3 November 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (11) , 2058
RF Characterization of GaAs HBT under Load Mismatch with Reverse Wave Injection Technique
RF PAs need to be reliable enough to protect them from damage under load mismatch conditions. This paper investigated the characteristics of GaAs heterojunction bipolar transistors (HBTs) under load mismatch conditions using a novel reverse wave injection technique to realize large VSWR ruggedness measurement with the circle centered at 50 Ohm and optimal impedance separately to analyze the device in real applications. With a real-time waveform measurement system, the RF voltage and current waveform information can be acquired, which provide a more-accurate view of what is occurring at the current generator plane of the HBT device. Thereby, the potential failure mechanisms and load impedance can be identified to design the most-suitable PA circuits in communication systems.
- 3 November 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (11) , 2058
Open AccessRF Characterization of GaAs HBT under Load Mismatch with Reverse Wave Injection Technique
RF PAs need to be reliable enough to protect them from damage under load mismatch conditions. This paper investigated the characteristics of GaAs heterojunction bipolar transistors (HBTs) under load mismatch conditions using a novel reverse wave injection technique to realize large VSWR ruggedness measurement with the circle centered at 50 Ohm and optimal impedance separately to analyze the device in real applications. With a real-time waveform measurement system, the RF voltage and current waveform information can be acquired, which provide a more-accurate view of what is occurring at the current generator plane of the HBT device. Thereby, the potential failure mechanisms and load impedance can be identified to design the most-suitable PA circuits in communication systems.
- Open Access
- 25 April 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (5) , 932
Design and Implementation of Broadband Hybrid 3-dB Couplers with Silicon-Based IPD Technology
Heterogeneous integration (HI) is a rapidly developing field aimed at achieving high-density integration and miniaturization of devices for complex practical radio frequency (RF) applications. In this study, we present the design and implementation of two 3 dB directional couplers utilizing the broadside-coupling mechanism and silicon-based integrated passive device (IPD) technology. The type A coupler incorporates a defect ground structure (DGS) to enhance coupling, while type B employs wiggly-coupled lines to improve directivity. Measurement results demonstrate that type A achieves <−16.16 dB isolation and <−22.32 dB return loss with a relative bandwidth of 60.96% in the 6.5–12.2 GHz range, while type B achieves <−21.21 dB isolation and <−23.95 dB return loss in the first band at 7–13 GHz, <−22.17 dB isolation and <−19.67 dB return loss in the second band at 28–32.5 GHz, and <−12.79 dB isolation and <−17.02 dB return loss in the third band at 49.5–54.5 GHz. The proposed couplers are well suited for low cost, high performance system-on-package radio frequency front-end circuits in wireless communication systems.
- 25 April 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (5) , 932
Open AccessDesign and Implementation of Broadband Hybrid 3-dB Couplers with Silicon-Based IPD Technology
Heterogeneous integration (HI) is a rapidly developing field aimed at achieving high-density integration and miniaturization of devices for complex practical radio frequency (RF) applications. In this study, we present the design and implementation of two 3 dB directional couplers utilizing the broadside-coupling mechanism and silicon-based integrated passive device (IPD) technology. The type A coupler incorporates a defect ground structure (DGS) to enhance coupling, while type B employs wiggly-coupled lines to improve directivity. Measurement results demonstrate that type A achieves <−16.16 dB isolation and <−22.32 dB return loss with a relative bandwidth of 60.96% in the 6.5–12.2 GHz range, while type B achieves <−21.21 dB isolation and <−23.95 dB return loss in the first band at 7–13 GHz, <−22.17 dB isolation and <−19.67 dB return loss in the second band at 28–32.5 GHz, and <−12.79 dB isolation and <−17.02 dB return loss in the third band at 49.5–54.5 GHz. The proposed couplers are well suited for low cost, high performance system-on-package radio frequency front-end circuits in wireless communication systems.
- Open Access
- 24 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (2) , 305
Modeling the Effects of Threading Dislocations on Current in AlGaN/GaN HEMT
The aim of this paper is to model the effects of threading dislocations on both gate and drain currents of AlGaN/GaN high electron mobility transistors (HEMTs). The fraction of filled traps increases with the threading dislocations, while the trapping effects cause a decrease in drain current and an increase in gate leakage current. To model the drain current drop, the two simplified RC subcircuits with diodes are proposed to capture the charge trapping/detrapping characteristics. The trap voltages Vg_trap and Vd_trap generated by RC networks are fed back into the model to capture the effects of traps on drain current. Considering acceptor-decorated dislocations, we present a novel Poole–Frenkel (PF) model to precisely describe the reverse leakage gate current, which plays a dominant role in the gate leakage current. The proposed model, which uses physical parameters only, is implemented in Verilog-A. It is in excellent agreement with the experimental data.
- 24 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (2) , 305
Open AccessModeling the Effects of Threading Dislocations on Current in AlGaN/GaN HEMT
The aim of this paper is to model the effects of threading dislocations on both gate and drain currents of AlGaN/GaN high electron mobility transistors (HEMTs). The fraction of filled traps increases with the threading dislocations, while the trapping effects cause a decrease in drain current and an increase in gate leakage current. To model the drain current drop, the two simplified RC subcircuits with diodes are proposed to capture the charge trapping/detrapping characteristics. The trap voltages Vg_trap and Vd_trap generated by RC networks are fed back into the model to capture the effects of traps on drain current. Considering acceptor-decorated dislocations, we present a novel Poole–Frenkel (PF) model to precisely describe the reverse leakage gate current, which plays a dominant role in the gate leakage current. The proposed model, which uses physical parameters only, is implemented in Verilog-A. It is in excellent agreement with the experimental data.
- Open Access
- 12 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2240
Multiphysics Analysis and Optimal Design of Compressible Micro-Interconnect for 2.5D/3D Heterogeneous Integration
Compressible Micro-Interconnect (CMI) shows tremendous potential in 2.5D/3D heterogeneous integration due to its outstanding performance in integration, electrical isolation, and thermal management. In this work, an optimal design approach for CMIs is developed based on a coupling framework of multiphysics simulation and particle swarm optimization (PSO). In the framework, the mechanical simulation was conducted firstly to obtain the stress distributions as CMI switched from the initial state to the working position. The contact resistance between CMI and the top pad was modeled and quantitively analyzed. Subsequently, the PSO method was utilized to implement the structural optimization of CMI to improve the performance. Multiphysics simulations of both the original and optimized CMIs were carried out and compared. With the implementation of the optimized CMIs, the contact resistance dropped from 155.3 mΩ to 108.8 mΩ, which brought significant improvement in both DC voltage drop and self-heating effect. The influence of the self-heating effect on the electrical performance of CMI is also discussed qualitatively.
- 12 September 2021
- Published by MDPI AG in Electronics
- Vol. 10 (18) , 2240
Open AccessMultiphysics Analysis and Optimal Design of Compressible Micro-Interconnect for 2.5D/3D Heterogeneous Integration
Compressible Micro-Interconnect (CMI) shows tremendous potential in 2.5D/3D heterogeneous integration due to its outstanding performance in integration, electrical isolation, and thermal management. In this work, an optimal design approach for CMIs is developed based on a coupling framework of multiphysics simulation and particle swarm optimization (PSO). In the framework, the mechanical simulation was conducted firstly to obtain the stress distributions as CMI switched from the initial state to the working position. The contact resistance between CMI and the top pad was modeled and quantitively analyzed. Subsequently, the PSO method was utilized to implement the structural optimization of CMI to improve the performance. Multiphysics simulations of both the original and optimized CMIs were carried out and compared. With the implementation of the optimized CMIs, the contact resistance dropped from 155.3 mΩ to 108.8 mΩ, which brought significant improvement in both DC voltage drop and self-heating effect. The influence of the self-heating effect on the electrical performance of CMI is also discussed qualitatively.
- Open Access
- 27 January 2021
- Published by Frontiers Media SA in Frontiers in Physics
- Vol. 8
Realization of Accurate Load Impedance Characterization for On-Wafer TRM Calibration
In this paper, the uncertainty and the impact of imperfect load calibration standard for on-wafer Through-Reflect-Match calibration method are analyzed with the help of 3D electromagnetic simulations. Based on the finding that load impedance can lead to significant errors in calibration, an automatic algorithm to determine the complex impedance of the load standard is proposed. This method evaluates the resistance as well as the parasitic inductance introduced by the misalignment of the probe tip to the substrate pad at mm-wave frequencies or the non-precize load standard. The proposed algorithm was verified by practical measurement, and the results show that by incorporating actual load impedance into the calibration algorithm, the deviations of RF measurement results are greatly suppressed.
- 27 January 2021
- Published by Frontiers Media SA in Frontiers in Physics
- Vol. 8
Open AccessRealization of Accurate Load Impedance Characterization for On-Wafer TRM Calibration
In this paper, the uncertainty and the impact of imperfect load calibration standard for on-wafer Through-Reflect-Match calibration method are analyzed with the help of 3D electromagnetic simulations. Based on the finding that load impedance can lead to significant errors in calibration, an automatic algorithm to determine the complex impedance of the load standard is proposed. This method evaluates the resistance as well as the parasitic inductance introduced by the misalignment of the probe tip to the substrate pad at mm-wave frequencies or the non-precize load standard. The proposed algorithm was verified by practical measurement, and the results show that by incorporating actual load impedance into the calibration algorithm, the deviations of RF measurement results are greatly suppressed.
- Open Access
- 28 May 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 898
128.76–129.56 GHz Fundamental Voltage Control Oscillator in 65 nm CMOS
This paper presented a fundamental voltage control oscillator (VCO), and its operating frequency ranged from 128.76 GHz to 129.56 GHz. A differential low negative coupling shield switch (DLNCSS) inductor was proposed and analyzed, which helped to improve the tuning range and phase noise of the presented VCO. Meanwhile, an improved transformer-coupled resonant tank, which consisted of DLNCSS inductor and differential varactor using the common-cathode structure, was used to improve the phase noise of the proposed VCO further. This presented VCO was designed and fabricated by using 65 nm CMOS process, which occupied a compact area of 0.23 mm2, including all testing pads. The measurement results showed that this VCO consumed 11.2 mW from a 1.4 V supply and had the tuning range of 0.8 GHz. The output power ranged from −11.8 dBm to −10.6 dBm in its operating frequency band. The post-layout simulation showed that the phase noise at 1 MHz was better than −82 dBc/Hz.
- 28 May 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 898
Open Access128.76–129.56 GHz Fundamental Voltage Control Oscillator in 65 nm CMOS
This paper presented a fundamental voltage control oscillator (VCO), and its operating frequency ranged from 128.76 GHz to 129.56 GHz. A differential low negative coupling shield switch (DLNCSS) inductor was proposed and analyzed, which helped to improve the tuning range and phase noise of the presented VCO. Meanwhile, an improved transformer-coupled resonant tank, which consisted of DLNCSS inductor and differential varactor using the common-cathode structure, was used to improve the phase noise of the proposed VCO further. This presented VCO was designed and fabricated by using 65 nm CMOS process, which occupied a compact area of 0.23 mm2, including all testing pads. The measurement results showed that this VCO consumed 11.2 mW from a 1.4 V supply and had the tuning range of 0.8 GHz. The output power ranged from −11.8 dBm to −10.6 dBm in its operating frequency band. The post-layout simulation showed that the phase noise at 1 MHz was better than −82 dBc/Hz.
- 29 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 11 (6) , 1478-1487
A Surface Acoustic Wave Pumped Lensless Microfluidic Imaging System for Flowing Cell Detection and Counting
The future point-of-care diagnostics requires miniaturizing the existing bulky and expensive bioanalysis instruments, where lab-on-CMOS-chip-based technology can provide a promising solution. In this paper, we presented a surface acoustic wave (SAW) pumped lensless microfluidic imaging system for flowing cell detection and counting. Different from the previous lensless systems, which employ external bulky syringe pump for cell driven, the developed system directly integrates the SAW pump on the CMOS image sensor chip to drive the cell-containing microfluid. Moreover, an efficient temporal-differencing-based motion detection algorithm is proposed for continuous flowing cell detection and counting. Experimental results show that the SAW pump can drive the cells to flow at different driven powers, and also can keep the channel temperature below 40 °C so as not to harm the cells. The human bone marrow stromal cells flowing in the microfluidic channel can be automatically detected and counted with a low statistical error rate of −6.53%. The developed system thereby is competitive for point-of-care cell detection and counting application.
- 29 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 11 (6) , 1478-1487
A Surface Acoustic Wave Pumped Lensless Microfluidic Imaging System for Flowing Cell Detection and Counting
The future point-of-care diagnostics requires miniaturizing the existing bulky and expensive bioanalysis instruments, where lab-on-CMOS-chip-based technology can provide a promising solution. In this paper, we presented a surface acoustic wave (SAW) pumped lensless microfluidic imaging system for flowing cell detection and counting. Different from the previous lensless systems, which employ external bulky syringe pump for cell driven, the developed system directly integrates the SAW pump on the CMOS image sensor chip to drive the cell-containing microfluid. Moreover, an efficient temporal-differencing-based motion detection algorithm is proposed for continuous flowing cell detection and counting. Experimental results show that the SAW pump can drive the cells to flow at different driven powers, and also can keep the channel temperature below 40 °C so as not to harm the cells. The human bone marrow stromal cells flowing in the microfluidic channel can be automatically detected and counted with a low statistical error rate of −6.53%. The developed system thereby is competitive for point-of-care cell detection and counting application.