Hongmei Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hongmei Dai has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Chun Fang
State Key Laboratory of Material Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan China
2 shared publications - Jiantao Han
State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering
2 shared publications - Paul. K. Chu
City University of Hong Kong
2 shared publications Qun Yi
School of Chemical Engineering and Pharmacy State Key Laboratory of Green and Efficient Development of Phosphorus Resources Wuhan Institute of Technology Wuhan P. R. China
2 shared publications- Yue Xu
State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
2 shared publications Changchun Ai
School of Chemical Engineering and Pharmacy State Key Laboratory of Green and Efficient Development of Phosphorus Resources Wuhan Institute of Technology Wuhan P. R. China
1 shared publication
Latest Publications
- Open Access
- 2 March 2026
- Published by Wiley in Advanced Science
- Vol. 13 (20) , e22230
2D Metal‐Organic Frameworks for High‐Performance Solid‐State Electrolytes: A Comprehensive Review
Solid‐state electrolytes (SSEs) represent a pivotal pathway for resolving critical battery safety concerns, offering excellent lithium‐ion conductivity, superior chemical compatibility, wide electrochemical stability windows, robust thermal stability, and potential for low‐cost mass production. However, conventional 3D metal‐organic framework (3D MOF)‐based SSEs are often plagued by tortuous ion conduction pathways, poor interfacial contact, and inadequate mechanical properties. In contrast, 2D metal‐organic frameworks (2D MOFs) demonstrate immense potential in the SSE field, owing to their unique layered structures, abundant active sites, and tunable ion‐transport channels. This article systematically reviews the latest research progress in 2D MOF‐based SSEs, with a focus on their structural characteristics, ion transport mechanisms, and interface optimization strategies. We analyze current challenges and offer perspectives on future development directions, providing new insights for the design of high‐performance solid‐state battery electrolytes.
- 2 March 2026
- Published by Wiley in Advanced Science
- Vol. 13 (20) , e22230
Open Access2D Metal‐Organic Frameworks for High‐Performance Solid‐State Electrolytes: A Comprehensive Review
Solid‐state electrolytes (SSEs) represent a pivotal pathway for resolving critical battery safety concerns, offering excellent lithium‐ion conductivity, superior chemical compatibility, wide electrochemical stability windows, robust thermal stability, and potential for low‐cost mass production. However, conventional 3D metal‐organic framework (3D MOF)‐based SSEs are often plagued by tortuous ion conduction pathways, poor interfacial contact, and inadequate mechanical properties. In contrast, 2D metal‐organic frameworks (2D MOFs) demonstrate immense potential in the SSE field, owing to their unique layered structures, abundant active sites, and tunable ion‐transport channels. This article systematically reviews the latest research progress in 2D MOF‐based SSEs, with a focus on their structural characteristics, ion transport mechanisms, and interface optimization strategies. We analyze current challenges and offer perspectives on future development directions, providing new insights for the design of high‐performance solid‐state battery electrolytes.
- 15 May 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (40)
Zirconium Modification Induced Small‐Polaron Breakdown in Na4Fe3(PO4)2P2O7 as Superior Cathode in Sodium‐Ion Battery
Na₄Fe₃(PO₄)₂(P₂O₇) (NFPP) is a promising cathode material for sodium‐ion batteries (SIBs) due to its low cost, facile synthesis, environmental compatibility, high structural stability, and suitable operating voltage. However, its practical application is hindered by poor cycling stability, limited rate capability, and low electronic/ionic conductivity. Herein, these challenges are addressed by strategically incorporating Zr⁴⁺ ions at the Fe1 site of NFPP (denoted as NZFPP‐X, where X represents the Zr/Fe ratio). The optimized NZFPP‐0.05 exhibits significantly enhanced thermodynamic stability and electrochemical performance. Zr substitution induces depolarization effects, which promote electron mobility, thereby improving conductivity, cycling stability, and rate performance. Specifically, NZFPP‐0.05 delivers an exceptional capacity retention of 86.6% after 6000 cycles at 10 C and a remarkable rate capability of 58.5 mAh g⁻¹ at 50 C. These advancements are attributed to the reduced energy barrier and accelerated kinetics of NZFPP‐0.05 compared to pristine NFPP. This work presents a novel Zr‐substitution strategy to enhance the performance of NFPP cathodes and introduces NZFPP‐0.05 as a cost‐effective, ultra‐stable, and high‐rate cathode material for SIBs.
- 15 May 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (40)
Zirconium Modification Induced Small‐Polaron Breakdown in Na4Fe3(PO4)2P2O7 as Superior Cathode in Sodium‐Ion Battery
Na₄Fe₃(PO₄)₂(P₂O₇) (NFPP) is a promising cathode material for sodium‐ion batteries (SIBs) due to its low cost, facile synthesis, environmental compatibility, high structural stability, and suitable operating voltage. However, its practical application is hindered by poor cycling stability, limited rate capability, and low electronic/ionic conductivity. Herein, these challenges are addressed by strategically incorporating Zr⁴⁺ ions at the Fe1 site of NFPP (denoted as NZFPP‐X, where X represents the Zr/Fe ratio). The optimized NZFPP‐0.05 exhibits significantly enhanced thermodynamic stability and electrochemical performance. Zr substitution induces depolarization effects, which promote electron mobility, thereby improving conductivity, cycling stability, and rate performance. Specifically, NZFPP‐0.05 delivers an exceptional capacity retention of 86.6% after 6000 cycles at 10 C and a remarkable rate capability of 58.5 mAh g⁻¹ at 50 C. These advancements are attributed to the reduced energy barrier and accelerated kinetics of NZFPP‐0.05 compared to pristine NFPP. This work presents a novel Zr‐substitution strategy to enhance the performance of NFPP cathodes and introduces NZFPP‐0.05 as a cost‐effective, ultra‐stable, and high‐rate cathode material for SIBs.
- 3 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (6) , 7070-7079
Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries
Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.
- 3 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (6) , 7070-7079
Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries
Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.
- 9 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (24) , 29170-29177
Conductive MOF on ZIF-Derived Carbon Fibers as Superior Anode in Sodium-Ion Battery
Superior specific capacity, high-rate capability, and long-term cycling stability are essential to anode materials in sodium-ion batteries, and conductive metal-organic frameworks (cMOF) with good electronic and ionic conductivity may satisfy these requirements. Herein, conductive neodymium cMOF (Nd-cMOF) produced in situ on the zeolitic imidazolate framework (ZIF)-derived carbon fiber (ZIF-CFs) platform is used to synthesize the Nd-cMOF/ZIF-CFs hierarchical structure. Four types of ZIFs with different pore diameters are prepared by electrospinning. In this novel structure, ZIF-CFs provide the electroconductivity, flexible porous structure, and mechanical stability, while Nd-cMOF provides the interfacial kinetic activity, electroconductivity, ample space, and volume buffer, consequently giving rise to robust structural integrity and excellent conductivity. The sodium-ion battery composed of the Nd-cMOF/ZIF-10-CFs anode has outstanding stability and electrochemical properties, such as a specific capacity of 480.5 mAh g-1 at 0.05 A g-1 as well as capacity retention of 84% after 500 cycles.
- 9 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (24) , 29170-29177
Conductive MOF on ZIF-Derived Carbon Fibers as Superior Anode in Sodium-Ion Battery
Superior specific capacity, high-rate capability, and long-term cycling stability are essential to anode materials in sodium-ion batteries, and conductive metal-organic frameworks (cMOF) with good electronic and ionic conductivity may satisfy these requirements. Herein, conductive neodymium cMOF (Nd-cMOF) produced in situ on the zeolitic imidazolate framework (ZIF)-derived carbon fiber (ZIF-CFs) platform is used to synthesize the Nd-cMOF/ZIF-CFs hierarchical structure. Four types of ZIFs with different pore diameters are prepared by electrospinning. In this novel structure, ZIF-CFs provide the electroconductivity, flexible porous structure, and mechanical stability, while Nd-cMOF provides the interfacial kinetic activity, electroconductivity, ample space, and volume buffer, consequently giving rise to robust structural integrity and excellent conductivity. The sodium-ion battery composed of the Nd-cMOF/ZIF-10-CFs anode has outstanding stability and electrochemical properties, such as a specific capacity of 480.5 mAh g-1 at 0.05 A g-1 as well as capacity retention of 84% after 500 cycles.
- 24 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (9) , 10870-10877
A Series of Molecule-Intercalated MoS2 as Anode Materials for Sodium Ion Batteries
Molybdenum disulfide (MoS2) with a graphite-like layer structure has attracted substantial interest as an anode material for sodium ion batteries (SIBs), but its inherent poor electrical conductivity and slow sodium ion transportation are the two important factors that limit its use in SIBs. Here, we report a general approach to synthesize a series of molecule-intercalated MoS2 with a precisely controlled interlayer distance of 0.62 to 1.24 nm in which the electrical conductivity could be also widely and finely adjusted from 1.3 × 10–4 to 3.5 × 10–2 S cm–1 via the insertion of different molecules. By adjusting the interlayer space and enhancing the electrical conductivity, the highest initial sodium ion storage capacity of 465 mA h g–1 (vs 195 mA h g–1 for the pure MoS2 anode) and the highest capacity of 420 mA h g–1 (vs 31 mA h g–1 for the pure MoS2 anode) after 600 cycles at a rate of 100 mA g–1 were obtained. The excellent performance is credited to the rapid Na+ and electron transport and higher material utilization derived from the synergistic effect of the expanded interlayer space and the higher electronic conductivity. The results provide some inspiration for the design and construction of superior layered anode materials for sodium-ion batteries.
- 24 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (9) , 10870-10877
A Series of Molecule-Intercalated MoS2 as Anode Materials for Sodium Ion Batteries
Molybdenum disulfide (MoS2) with a graphite-like layer structure has attracted substantial interest as an anode material for sodium ion batteries (SIBs), but its inherent poor electrical conductivity and slow sodium ion transportation are the two important factors that limit its use in SIBs. Here, we report a general approach to synthesize a series of molecule-intercalated MoS2 with a precisely controlled interlayer distance of 0.62 to 1.24 nm in which the electrical conductivity could be also widely and finely adjusted from 1.3 × 10–4 to 3.5 × 10–2 S cm–1 via the insertion of different molecules. By adjusting the interlayer space and enhancing the electrical conductivity, the highest initial sodium ion storage capacity of 465 mA h g–1 (vs 195 mA h g–1 for the pure MoS2 anode) and the highest capacity of 420 mA h g–1 (vs 31 mA h g–1 for the pure MoS2 anode) after 600 cycles at a rate of 100 mA g–1 were obtained. The excellent performance is credited to the rapid Na+ and electron transport and higher material utilization derived from the synergistic effect of the expanded interlayer space and the higher electronic conductivity. The results provide some inspiration for the design and construction of superior layered anode materials for sodium-ion batteries.
- 28 May 2020
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 8 (22) , 8102-8110
Reticulation of 2D Semiconductors by Metal–Organic Approach for Efficient Hydrogen Evolution
- 28 May 2020
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 8 (22) , 8102-8110
Reticulation of 2D Semiconductors by Metal–Organic Approach for Efficient Hydrogen Evolution