Mariana Coutinho Sancas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mariana Coutinho Sancas has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Andréa Vaz Braga Pintor
Programa de Pós-Graduação, Faculdade de Odontologia, Universidade Veiga de Almeida, Rio de janeiro/RJ, Brasil
2 shared publications - Laura Guimarães Primo
Universidade Federal do Rio de Janeiro, Brazil
2 shared publications - Aline de Almeida Neves
Department of Pediatric Dentistry and Orthodontics, School of Dentistry Federal University of Rio de Janeiro Rio de Janeiro RJ Brazil
1 shared publication - Ana Carolina Santarem
DFL Indústria e Comércio SA
1 shared publication Andrea Fonseca Gonçalves
Universidade Federal do Rio de Janeiro
1 shared publicationAndrea Vaz Braga Pintor
Universidade Federal do Rio de Janeiro
1 shared publication
Latest Publications
- Open Access
- 29 January 2026
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 25, e269243
Does zirconium compounds impact glass ionomer cements properties?
Objective: The aim of this scoping review was to comprehensively search the literature to identify and present available published information regarding the addition of zirconium compounds into glass ionomer cements (GICs), the incorporation methodologies, and the impact of zirconium on the properties of GICs. Methods: The protocol was registered in the Open Science Framework Registries (https://doi.org/10.17605/OSF.IO/BWVJK). The search was conducted across eight databases in June 2023. Selected journals were screened for potential predatory status. Data regarding study design, classification of dental materials, zirconium incorporation, and property assessments were extracted and synthesized. Results: A total of 72 studies, mostly in vitro, were included. Zirconomer, commercially modified GICs, and experimental GICs were identified. Zirconia 10% was the most common added zirconium compound, and nanometric particles resulted in superior mechanical performance. Regarding compressive strength and microhardness, Zirconomer exhibited superior results, while modified or experimental GICs demonstrated lower values compared to commercial GICs lacking zirconium compounds. Zirconomer is the sole commercially available zirconium-based GIC. Among the experimental materials, zirconia nanoparticles at 5% and 10% incorporation ratios presented the most favorable mechanical properties, especially microhardness and compressive strength. Conclusion: These findings suggest a favorable scenario for the clinical application of glass ionomer cements modified with zirconium compounds. Glass ionomer cements modified with zirconium compounds showed enhanced mechanical properties relevant for restorative dentistry.
- 29 January 2026
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 25, e269243
Open AccessDoes zirconium compounds impact glass ionomer cements properties?
Objective: The aim of this scoping review was to comprehensively search the literature to identify and present available published information regarding the addition of zirconium compounds into glass ionomer cements (GICs), the incorporation methodologies, and the impact of zirconium on the properties of GICs. Methods: The protocol was registered in the Open Science Framework Registries (https://doi.org/10.17605/OSF.IO/BWVJK). The search was conducted across eight databases in June 2023. Selected journals were screened for potential predatory status. Data regarding study design, classification of dental materials, zirconium incorporation, and property assessments were extracted and synthesized. Results: A total of 72 studies, mostly in vitro, were included. Zirconomer, commercially modified GICs, and experimental GICs were identified. Zirconia 10% was the most common added zirconium compound, and nanometric particles resulted in superior mechanical performance. Regarding compressive strength and microhardness, Zirconomer exhibited superior results, while modified or experimental GICs demonstrated lower values compared to commercial GICs lacking zirconium compounds. Zirconomer is the sole commercially available zirconium-based GIC. Among the experimental materials, zirconia nanoparticles at 5% and 10% incorporation ratios presented the most favorable mechanical properties, especially microhardness and compressive strength. Conclusion: These findings suggest a favorable scenario for the clinical application of glass ionomer cements modified with zirconium compounds. Glass ionomer cements modified with zirconium compounds showed enhanced mechanical properties relevant for restorative dentistry.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 40
In vitro analysis of dimensional stability of fast-setting irreversible hydrocolloids by digital scanning
This study aimed to evaluate the in vitro dimensional stability of Moldeer Fast compared with two commercially available extended-pour, fast-setting irreversible hydrocolloids using direct digital scanning of dental impressions. This experimental in vitro study was conducted using standardized impression techniques on a typodont. Impressions were obtained in random order by a single calibrated operator. Three irreversible hydrocolloids were evaluated: ColorChange (Cavex Holland BV), Hydrogum 5 (Zhermack Spa), and Moldeer Fast (DFL). Ten impressions were obtained per group according to the manufacturers’ instructions and scanned using an intraoral scanner at predetermined intervals (0 h, 24 h, 48 h, 72 h, 96 h, and 120 h). Impressions were stored under controlled temperature and humidity conditions. Four linear measurements were performed on color-masked images in a blind manner to assess dimensional changes over time: a) intercanine distance, b) intermolar distance, c) right canine-to-molar distance, and d) left canine-to-molar distance. Data were analyzed using repeated-measures ANOVA (α = 0.05). All materials exhibited minor dimensional changes, consisting predominantly of slight contraction. However, no statistically significant differences were observed over time (p > 0.05). Moldeer Fast therefore exhibited dimensional stability comparable to that of ColorChange and Hydrogum 5. All materials maintained clinically acceptable dimensional stability for up to five days, supporting their suitability for delayed digital scanning of irreversible hydrocolloid impressions.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 40
Open AccessIn vitro analysis of dimensional stability of fast-setting irreversible hydrocolloids by digital scanning
This study aimed to evaluate the in vitro dimensional stability of Moldeer Fast compared with two commercially available extended-pour, fast-setting irreversible hydrocolloids using direct digital scanning of dental impressions. This experimental in vitro study was conducted using standardized impression techniques on a typodont. Impressions were obtained in random order by a single calibrated operator. Three irreversible hydrocolloids were evaluated: ColorChange (Cavex Holland BV), Hydrogum 5 (Zhermack Spa), and Moldeer Fast (DFL). Ten impressions were obtained per group according to the manufacturers’ instructions and scanned using an intraoral scanner at predetermined intervals (0 h, 24 h, 48 h, 72 h, 96 h, and 120 h). Impressions were stored under controlled temperature and humidity conditions. Four linear measurements were performed on color-masked images in a blind manner to assess dimensional changes over time: a) intercanine distance, b) intermolar distance, c) right canine-to-molar distance, and d) left canine-to-molar distance. Data were analyzed using repeated-measures ANOVA (α = 0.05). All materials exhibited minor dimensional changes, consisting predominantly of slight contraction. However, no statistically significant differences were observed over time (p > 0.05). Moldeer Fast therefore exhibited dimensional stability comparable to that of ColorChange and Hydrogum 5. All materials maintained clinically acceptable dimensional stability for up to five days, supporting their suitability for delayed digital scanning of irreversible hydrocolloid impressions.
- Open Access
- 8 May 2023
- Published by Asociacion Latinoamericana de Odontopediatria in Revista de Odontopediatría Latinoamericana
- Vol. 13
Odontopediatria no contexto da COVID-19: publicações científicas e prática clínica
O objetivo é analisar as características dos estudos e tendências nas publicações científicas e recomendações clínicas relacionadas ao COVID-19 em odontopediatria. A busca eletrônica foi realizada nas bases de dados MEDLINE, Scopus, Web of Science Core Collection e LILACS/BVS, sem restrições. Foram incluídos estudos que usaram termos referentes a COVID-19, odontopediatria e crianças no título, resumo ou palavras-chave. Os dados bibliométricos e as características do estudo foram extraídos. Cada estudo foi categorizado de acordo com seu desenho, amostra e tema principal. Quarenta e nove estudos foram incluídos, sendo a maioria revisões (n=25; 51,00%), estudos observacionais (n=23; 47,00%) e estudo clínico (n=1; 2%). Os principais temas foram emergências odontológicas (n=9; 18,30%), biossegurança (n= 8; 16,30%) e teleodontologia (n=6; 12,20%). As emergências odontológicas mais relatadas foram trauma (n=12; 63,10%), edema (n=9; 47,30%) e dor (n=9; 47,30%). Concluiu-se que poucos estudos sobre COVID-19 e odontopediatria foram realizados, com a maioria das revisões e estudos observacionais sobre emergências odontológicas publicados na Ásia.
- 8 May 2023
- Published by Asociacion Latinoamericana de Odontopediatria in Revista de Odontopediatría Latinoamericana
- Vol. 13
Open AccessOdontopediatria no contexto da COVID-19: publicações científicas e prática clínica
O objetivo é analisar as características dos estudos e tendências nas publicações científicas e recomendações clínicas relacionadas ao COVID-19 em odontopediatria. A busca eletrônica foi realizada nas bases de dados MEDLINE, Scopus, Web of Science Core Collection e LILACS/BVS, sem restrições. Foram incluídos estudos que usaram termos referentes a COVID-19, odontopediatria e crianças no título, resumo ou palavras-chave. Os dados bibliométricos e as características do estudo foram extraídos. Cada estudo foi categorizado de acordo com seu desenho, amostra e tema principal. Quarenta e nove estudos foram incluídos, sendo a maioria revisões (n=25; 51,00%), estudos observacionais (n=23; 47,00%) e estudo clínico (n=1; 2%). Os principais temas foram emergências odontológicas (n=9; 18,30%), biossegurança (n= 8; 16,30%) e teleodontologia (n=6; 12,20%). As emergências odontológicas mais relatadas foram trauma (n=12; 63,10%), edema (n=9; 47,30%) e dor (n=9; 47,30%). Concluiu-se que poucos estudos sobre COVID-19 e odontopediatria foram realizados, com a maioria das revisões e estudos observacionais sobre emergências odontológicas publicados na Ásia.
- 15 September 2022
- Published by Wiley in Dental Traumatology
- Vol. 39 (1) , 82-87
Conservative management of a horizontal root fracture in a primary maxillary central incisor: Case report
Dental trauma occurs frequently in toddlers and the treatment protocols vary depending on each case. Thus, clinicians must not only plan the treatment but also consider any possible sequelae and characteristics related to the child and the family. The aim of this paper was to report a case of a three‐year‐old boy who had a horizontal root fracture in the middle third of the primary maxillary right incisor root (tooth 51) and crown discoloration of the primary maxillary left incisor (tooth 61) which were successfully treated with conservative management. The management was established in agreement with the family and was based on active surveillance. The clinical and radiographic follow‐ups showed no changes besides pulp canal calcification of the left incisor throughout the eight years of follow‐up. The pulps remained normal with no pathological signs throughout their life cycle and the permanent successors erupted normally, presenting an excellent result of the non‐invasive approach adopted.
- 15 September 2022
- Published by Wiley in Dental Traumatology
- Vol. 39 (1) , 82-87
Conservative management of a horizontal root fracture in a primary maxillary central incisor: Case report
Dental trauma occurs frequently in toddlers and the treatment protocols vary depending on each case. Thus, clinicians must not only plan the treatment but also consider any possible sequelae and characteristics related to the child and the family. The aim of this paper was to report a case of a three‐year‐old boy who had a horizontal root fracture in the middle third of the primary maxillary right incisor root (tooth 51) and crown discoloration of the primary maxillary left incisor (tooth 61) which were successfully treated with conservative management. The management was established in agreement with the family and was based on active surveillance. The clinical and radiographic follow‐ups showed no changes besides pulp canal calcification of the left incisor throughout the eight years of follow‐up. The pulps remained normal with no pathological signs throughout their life cycle and the permanent successors erupted normally, presenting an excellent result of the non‐invasive approach adopted.
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Pesquisa Brasileira em Odontopediatria e Clínica Integrada
- Vol. 20
Reliability of Two Methods of Evaluation of the Apical Limit of Obturation of Root Canals of Primary Teeth: A Pilot Study
Objective: To verify the concordance in the evaluation of the apical limit of obturation (ALO) in filled root canals of primary teeth between digital and visual methods. Material and Methods: Twenty periapical radiographs of endodontically treated primary teeth were digitalized and evaluated by an endodontics specialist (E1), a PhD pediatric dentist (E2), and a MSc general dentist (E3). Calibrated evaluators (Kappa = 1.00) analysed the images in a light-isolated environment two times (D1 and D2) with a one-week interval between evaluations. ALO scores were categorized as overfilled, flush-filled and underfilled. Results: The intra-rater reliability between methods was 0.82 (D1) and 0.75 (D2) for E1, 0.93 (D1 and D2) for E2, and 0.94 (D1 and D2) for E3. Inter-rater reliability ranged from 0.71 (E1 × E3) and 1.00 (E1 × E2) for the visual method to 0.76 (E1 × E3) and 0.88 (E1 × E2) for the digital method. Spearman correlation coefficients showed a similar ranking among the evaluators. There was greater disagreement among the underfilled and ideal scores. For all evaluators, the digital method favoured the identification of the ideal score. Conclusion: Both methods are suitable for the determination of the ALO of filled primary teeth and can be used in clinical practice.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Pesquisa Brasileira em Odontopediatria e Clínica Integrada
- Vol. 20
Open AccessReliability of Two Methods of Evaluation of the Apical Limit of Obturation of Root Canals of Primary Teeth: A Pilot Study
Objective: To verify the concordance in the evaluation of the apical limit of obturation (ALO) in filled root canals of primary teeth between digital and visual methods. Material and Methods: Twenty periapical radiographs of endodontically treated primary teeth were digitalized and evaluated by an endodontics specialist (E1), a PhD pediatric dentist (E2), and a MSc general dentist (E3). Calibrated evaluators (Kappa = 1.00) analysed the images in a light-isolated environment two times (D1 and D2) with a one-week interval between evaluations. ALO scores were categorized as overfilled, flush-filled and underfilled. Results: The intra-rater reliability between methods was 0.82 (D1) and 0.75 (D2) for E1, 0.93 (D1 and D2) for E2, and 0.94 (D1 and D2) for E3. Inter-rater reliability ranged from 0.71 (E1 × E3) and 1.00 (E1 × E2) for the visual method to 0.76 (E1 × E3) and 0.88 (E1 × E2) for the digital method. Spearman correlation coefficients showed a similar ranking among the evaluators. There was greater disagreement among the underfilled and ideal scores. For all evaluators, the digital method favoured the identification of the ideal score. Conclusion: Both methods are suitable for the determination of the ALO of filled primary teeth and can be used in clinical practice.