Yanming Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanming Cheng has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Pengfei Liu
College of Electrical and Information Engineering, Beihua University, Jilin 132013, China
3 shared publications - Shuairan Yu
College of Electrical and Information Engineering, Beihua University, Jilin 132013, China
3 shared publications - Dejun Liu
College of Electrical and Information Engineering, Beihua University, Jilin 132013, China
2 shared publications - Guoqiang Qiu
College of Electrical and Information Engineering, Beihua University, Jilin City 132021, China
2 shared publications - Xiaodan Zhang
College of Electrical and Information Engineering, Beihua University, Jilin 132013, China
2 shared publications - Bowen Chi
College of Electrical and Information Engineering, Beihua University, Jilin City 132021, China
1 shared publication
Latest Publications
- Open Access
- 13 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (14) , 7022
Prediction of Coiling Temperature for Hot-Rolled Strip Steel Based on WOA-CNN-GRU-SE Model
Coiling temperature is a pivotal process parameter for hot-rolled strip steel, which directly determines the microstructure and mechanical properties of final products. Affected by the coupling of multiple process variables, coiling temperature presents strong nonlinearity and complex time-varying characteristics. Traditional heat transfer mechanism models, Random Forest (RF), Extreme Learning Machine (ELM) and single Long Short-Term Memory (LSTM) networks fail to fully explore the deep correlation among variables. In addition, their hyperparameters are generally selected by manual trial-and-error, leading to unsatisfactory prediction accuracy and poor robustness in practical production. To address the above limitations, this paper proposes a novel prediction model named WOA-CNN-GRU-SE, where the Whale Optimization Algorithm (WOA) is adopted for parameter optimization. Firstly, Convolutional Neural Network (CNN) is utilized to extract local coupling features from various working condition parameters. Secondly, the Squeeze-and-Excitation (SE) attention mechanism is applied to adaptively recalibrate channel weights, which enhances key features closely related to temperature variation and suppresses redundant interference information. Afterwards, Gated Recurrent Unit (GRU) is employed to conduct in-depth learning of temporal features. Furthermore, WOA is used to globally optimize critical hyperparameters, including learning rate, the number of GRU hidden units and L2 regularization coefficient, so as to eliminate the drawbacks of manual parameter tuning. Comparative experiments are conducted on actual production data from a hot rolling line. The results demonstrate that the proposed model outperforms CNN-GRU, CNN-GRU-SE, LSTM, RF and ELM in prediction performance. Its hit rate reaches 92.56% within the industrial error range of ±6 °C. This model effectively realizes accurate prediction of coiling temperature under complex working conditions and possesses great application potential in industrial practice.
- 13 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (14) , 7022
Open AccessPrediction of Coiling Temperature for Hot-Rolled Strip Steel Based on WOA-CNN-GRU-SE Model
Coiling temperature is a pivotal process parameter for hot-rolled strip steel, which directly determines the microstructure and mechanical properties of final products. Affected by the coupling of multiple process variables, coiling temperature presents strong nonlinearity and complex time-varying characteristics. Traditional heat transfer mechanism models, Random Forest (RF), Extreme Learning Machine (ELM) and single Long Short-Term Memory (LSTM) networks fail to fully explore the deep correlation among variables. In addition, their hyperparameters are generally selected by manual trial-and-error, leading to unsatisfactory prediction accuracy and poor robustness in practical production. To address the above limitations, this paper proposes a novel prediction model named WOA-CNN-GRU-SE, where the Whale Optimization Algorithm (WOA) is adopted for parameter optimization. Firstly, Convolutional Neural Network (CNN) is utilized to extract local coupling features from various working condition parameters. Secondly, the Squeeze-and-Excitation (SE) attention mechanism is applied to adaptively recalibrate channel weights, which enhances key features closely related to temperature variation and suppresses redundant interference information. Afterwards, Gated Recurrent Unit (GRU) is employed to conduct in-depth learning of temporal features. Furthermore, WOA is used to globally optimize critical hyperparameters, including learning rate, the number of GRU hidden units and L2 regularization coefficient, so as to eliminate the drawbacks of manual parameter tuning. Comparative experiments are conducted on actual production data from a hot rolling line. The results demonstrate that the proposed model outperforms CNN-GRU, CNN-GRU-SE, LSTM, RF and ELM in prediction performance. Its hit rate reaches 92.56% within the industrial error range of ±6 °C. This model effectively realizes accurate prediction of coiling temperature under complex working conditions and possesses great application potential in industrial practice.
- Open Access
Model-Free Predictive Synthesis Performance Optimization of DAB Converters Based on an Ultra-Local Model
The dual-active-bridge (DAB) converter is the core component of the DC micro-grid system; it has the advantages of topological structure symmetry, high efficiency, and high-power density. Model predictive control (MPC) is often employed to improve the dynamic response characteristics of the system, but its strong parameter dependence is a key factor limiting the development of MPC. Therefore, a model-free predictive control (MFPC) method combining an ultra-local model with model predictive control is proposed to solve the problem of strong dependence of traditional MPC on system model parameters. Firstly, establish the ultra-local mathematical model of the DAB converter. The system’s lumped disturbances are identified using the residual prediction method and substituted into the discrete model of the system at the next time step to achieve model-free prediction. Secondly, a minimum back-flow power constraint is added to the cost function to improve the steady-state performance of the converter. Thirdly, in the extended phase shift modulation, the Lagrange multiplier method (LMM) is proposed to reduce the current stress, ultimately achieving the collaborative optimization of the comprehensive performance of the DAB. Finally, a simulation model is built using MATLAB/Simulink, and compared with traditional control methods, the voltage ripple has been reduced by 51.3%, 89.1%, and 85.1%, respectively; the current stress significantly decreases both when the output voltage reference value changes and when the load resistance changes abruptly, and both can basically achieve zero back-flow power operation. The validity and superiority of the proposed strategy have been verified.
Open AccessModel-Free Predictive Synthesis Performance Optimization of DAB Converters Based on an Ultra-Local Model
The dual-active-bridge (DAB) converter is the core component of the DC micro-grid system; it has the advantages of topological structure symmetry, high efficiency, and high-power density. Model predictive control (MPC) is often employed to improve the dynamic response characteristics of the system, but its strong parameter dependence is a key factor limiting the development of MPC. Therefore, a model-free predictive control (MFPC) method combining an ultra-local model with model predictive control is proposed to solve the problem of strong dependence of traditional MPC on system model parameters. Firstly, establish the ultra-local mathematical model of the DAB converter. The system’s lumped disturbances are identified using the residual prediction method and substituted into the discrete model of the system at the next time step to achieve model-free prediction. Secondly, a minimum back-flow power constraint is added to the cost function to improve the steady-state performance of the converter. Thirdly, in the extended phase shift modulation, the Lagrange multiplier method (LMM) is proposed to reduce the current stress, ultimately achieving the collaborative optimization of the comprehensive performance of the DAB. Finally, a simulation model is built using MATLAB/Simulink, and compared with traditional control methods, the voltage ripple has been reduced by 51.3%, 89.1%, and 85.1%, respectively; the current stress significantly decreases both when the output voltage reference value changes and when the load resistance changes abruptly, and both can basically achieve zero back-flow power operation. The validity and superiority of the proposed strategy have been verified.
- Open Access
- 6 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4560
Speed Control System for Permanent Magnet Synchronous Motor Based on Improved Self-Tuning PID + NDO
In order to improve the speed control performance of the permanent magnet synchronous motor, an improved self-coupling PID with NDO (nonlinear disturbance observer) compensation control strategy is proposed. To address the problems of the traditional self-coupling PID being inflexible and making it difficult to achieve an optimal response, a four-parameter self-coupling PID control strategy is proposed. This strategy not only solves the problems of dimensional conflict and a discordant control mechanism but also expands the selection range of closed-loop poles. On the other hand, a nonlinear disturbance observer is designed to improve the system’s anti-disturbance performance. The observed disturbance is transformed into a compensating current to enhance the system’s anti-disturbance ability. Simulations and experiments demonstrate that the control strategy proposed in this paper is effective: the maximum regulation time is less than 0.03 s, the maximum dynamic speed drop is less than 5 r/min, and the maximum recovery time is less than 0.002 s.
- 6 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4560
Open AccessSpeed Control System for Permanent Magnet Synchronous Motor Based on Improved Self-Tuning PID + NDO
In order to improve the speed control performance of the permanent magnet synchronous motor, an improved self-coupling PID with NDO (nonlinear disturbance observer) compensation control strategy is proposed. To address the problems of the traditional self-coupling PID being inflexible and making it difficult to achieve an optimal response, a four-parameter self-coupling PID control strategy is proposed. This strategy not only solves the problems of dimensional conflict and a discordant control mechanism but also expands the selection range of closed-loop poles. On the other hand, a nonlinear disturbance observer is designed to improve the system’s anti-disturbance performance. The observed disturbance is transformed into a compensating current to enhance the system’s anti-disturbance ability. Simulations and experiments demonstrate that the control strategy proposed in this paper is effective: the maximum regulation time is less than 0.03 s, the maximum dynamic speed drop is less than 5 r/min, and the maximum recovery time is less than 0.002 s.
- Open Access
- 16 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1958
Speed Control of Sliding Mode Variable Structure for Permanent Magnet Synchronous Motors Based on Iterative Learning and Torque Compensation
To reduce the impact of periodic pulsating torque and non-periodic disturbances on the speed control performance of permanent magnet synchronous motors (PMSMs), a sliding mode variable structure control method incorporating iterative learning compensation and load torque observation compensation is proposed. First, iterative learning control (ILC) is designed to address periodic disturbances and suppress periodic torque ripple. A load torque observation compensator is developed to counteract non-periodic disturbances, thereby enhancing the system’s robustness against uncertain disturbances. Second, numerical simulations compare the proposed method with sliding mode control (SMC), sliding mode control with load torque observation compensation (SMC + LO), and linear active disturbance rejection control (LADRC). The simulation results demonstrate that the proposed control strategy achieves reduced torque ripple, improved system tracking, and strong robustness. Finally, physical experiments are conducted, and the results closely align with the simulations. Both simulation and experimental outcomes confirm the effectiveness of the proposed control strategy in enhancing the speed performance of permanent magnet synchronous motors.
- 16 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1958
Open AccessSpeed Control of Sliding Mode Variable Structure for Permanent Magnet Synchronous Motors Based on Iterative Learning and Torque Compensation
To reduce the impact of periodic pulsating torque and non-periodic disturbances on the speed control performance of permanent magnet synchronous motors (PMSMs), a sliding mode variable structure control method incorporating iterative learning compensation and load torque observation compensation is proposed. First, iterative learning control (ILC) is designed to address periodic disturbances and suppress periodic torque ripple. A load torque observation compensator is developed to counteract non-periodic disturbances, thereby enhancing the system’s robustness against uncertain disturbances. Second, numerical simulations compare the proposed method with sliding mode control (SMC), sliding mode control with load torque observation compensation (SMC + LO), and linear active disturbance rejection control (LADRC). The simulation results demonstrate that the proposed control strategy achieves reduced torque ripple, improved system tracking, and strong robustness. Finally, physical experiments are conducted, and the results closely align with the simulations. Both simulation and experimental outcomes confirm the effectiveness of the proposed control strategy in enhancing the speed performance of permanent magnet synchronous motors.
- Open Access
- 7 November 2025
- Published by MDPI AG in Electronics
- Vol. 14 (22) , 4358
An Efficient Magnetic Coupler with Tight Coupling, Precise Alignment, and Low Leakage Shielding for UAV Wireless Charging
In this paper, an efficient magnetic coupler featuring tight coupling and precise alignment is proposed for unmanned aerial vehicle (UAV) wireless charging systems. The design integrates ArUco markers for accurate landing guidance, a position-limiting guide groove to facilitate mechanical alignment, and a dual-coil tightly coupled configuration to significantly enhance charging efficiency. Specifically, the dual-coil structure is carefully optimized to maximize magnetic coupling and energy transfer performance. Additionally, an improved electromagnetic shielding structure is implemented to reduce electromagnetic leakage and further improve system efficiency. A suitable wireless charging circuit topology is then designed and thoroughly analyzed to match the proposed magnetic coupler, enabling constant-voltage charging operation. The performance of the system is validated through both finite element simulations using ANSYS Maxwell and experimental testing on a prototype setup. Results demonstrate that the integration of ArUco-based visual guidance with the mechanical alignment mechanism achieves a landing deviation of ±12.5 mm without requiring auxiliary positioning components, thereby simplifying system architecture. Under the tightly coupled configuration, the proposed system delivers 78.8 W of charging power to a UAV with a peak efficiency of 95.93%, confirming its effectiveness and high performance.
- 7 November 2025
- Published by MDPI AG in Electronics
- Vol. 14 (22) , 4358
Open AccessAn Efficient Magnetic Coupler with Tight Coupling, Precise Alignment, and Low Leakage Shielding for UAV Wireless Charging
In this paper, an efficient magnetic coupler featuring tight coupling and precise alignment is proposed for unmanned aerial vehicle (UAV) wireless charging systems. The design integrates ArUco markers for accurate landing guidance, a position-limiting guide groove to facilitate mechanical alignment, and a dual-coil tightly coupled configuration to significantly enhance charging efficiency. Specifically, the dual-coil structure is carefully optimized to maximize magnetic coupling and energy transfer performance. Additionally, an improved electromagnetic shielding structure is implemented to reduce electromagnetic leakage and further improve system efficiency. A suitable wireless charging circuit topology is then designed and thoroughly analyzed to match the proposed magnetic coupler, enabling constant-voltage charging operation. The performance of the system is validated through both finite element simulations using ANSYS Maxwell and experimental testing on a prototype setup. Results demonstrate that the integration of ArUco-based visual guidance with the mechanical alignment mechanism achieves a landing deviation of ±12.5 mm without requiring auxiliary positioning components, thereby simplifying system architecture. Under the tightly coupled configuration, the proposed system delivers 78.8 W of charging power to a UAV with a peak efficiency of 95.93%, confirming its effectiveness and high performance.
- Open Access
Analysis and Compensation of Dead-Time Effect in Dual Active Bridge with Asymmetric Duty Cycle
The dead-time effect seriously affects the soft-switching performance and operating efficiency of the dual-active-bridge converter, and also causes problems such as reduced duty cycle, distortion of voltage and current waveforms, and narrowed transmission power range. The proposal of the five-degree-of-freedom modulation strategy transforms the working voltage waveforms of the primary and secondary sides as well as the inductor current waveform of the DAB converter from symmetric to asymmetric, while the dead-time issue still persists. Based on the five-degree-of-freedom modulation strategy, this paper analyzes the electrical characteristics of the converter before and after the introduction of dead time, designs switch drive pulses to avoid the dead time, and proposes a dead-time compensation modulation strategy based on five-degree-of-freedom phase shift. The results show that the proposed dead-time compensation control strategy can avoid problems such as voltage and current waveform distortion and reduction in the soft-switching power range caused by dead time, realizing dead-time compensation in the full power range. Experimental measurements show that, for different voltage transmission ratios, the maximum efficiency improvement is approximately 3.8–4% and the current stress is reduced by 2.11% to 3.13% under low-power operating conditions. The maximum efficiency improvement is approximately about 1.4–2.8% and the current stress is reduced by 1.84% to 2.53% under high-power operating conditions.
Open AccessAnalysis and Compensation of Dead-Time Effect in Dual Active Bridge with Asymmetric Duty Cycle
The dead-time effect seriously affects the soft-switching performance and operating efficiency of the dual-active-bridge converter, and also causes problems such as reduced duty cycle, distortion of voltage and current waveforms, and narrowed transmission power range. The proposal of the five-degree-of-freedom modulation strategy transforms the working voltage waveforms of the primary and secondary sides as well as the inductor current waveform of the DAB converter from symmetric to asymmetric, while the dead-time issue still persists. Based on the five-degree-of-freedom modulation strategy, this paper analyzes the electrical characteristics of the converter before and after the introduction of dead time, designs switch drive pulses to avoid the dead time, and proposes a dead-time compensation modulation strategy based on five-degree-of-freedom phase shift. The results show that the proposed dead-time compensation control strategy can avoid problems such as voltage and current waveform distortion and reduction in the soft-switching power range caused by dead time, realizing dead-time compensation in the full power range. Experimental measurements show that, for different voltage transmission ratios, the maximum efficiency improvement is approximately 3.8–4% and the current stress is reduced by 2.11% to 3.13% under low-power operating conditions. The maximum efficiency improvement is approximately about 1.4–2.8% and the current stress is reduced by 1.84% to 2.53% under high-power operating conditions.
- Open Access
Improved Bipolar Coordinate Control Strategy for 400 Hz Inverter in Aviation Ground Power Supply
This paper presents an enhanced bipolar control strategy for 400 Hz three-phase inverters in aviation ground power supplies, with a focus on maintaining symmetry in power output under unbalanced load conditions. The strategy integrates Linear Active Disturbance Rejection Control (LADRC) for robust positive sequence voltage regulation, Proportional Integral with repetitive control (PI + RC) for harmonic suppression in positive sequence currents, and a Quasi-Proportional Resonance (QPR) controller for negative sequence components in the static coordinate system. By doing so, it simplifies negative sequence control and combines PI + RC to improve the dynamic response and eliminate periodic errors. In the context of symmetry, the proposed strategy effectively reduces the total harmonic distortion (THD) and the three-phase current imbalance degree. Simulation results show significant improvements: under balanced loads, THD is reduced by 41.5% (from 1.95% to 1.14%) compared to traditional PI control; under single-phase and three-phase unbalanced loads, THD decreases by 52.7% (2.56% to 1.21%) and 48.1% (2.39% to 1.24%), respectively. The system’s settling time during load transients is shortened by over 30%, and the three-phase current imbalance degree is reduced by 60–70%, which validates the strategy’s effectiveness in enhancing power quality and system stability, thus restoring and maintaining the symmetry of the power output.
Open AccessImproved Bipolar Coordinate Control Strategy for 400 Hz Inverter in Aviation Ground Power Supply
This paper presents an enhanced bipolar control strategy for 400 Hz three-phase inverters in aviation ground power supplies, with a focus on maintaining symmetry in power output under unbalanced load conditions. The strategy integrates Linear Active Disturbance Rejection Control (LADRC) for robust positive sequence voltage regulation, Proportional Integral with repetitive control (PI + RC) for harmonic suppression in positive sequence currents, and a Quasi-Proportional Resonance (QPR) controller for negative sequence components in the static coordinate system. By doing so, it simplifies negative sequence control and combines PI + RC to improve the dynamic response and eliminate periodic errors. In the context of symmetry, the proposed strategy effectively reduces the total harmonic distortion (THD) and the three-phase current imbalance degree. Simulation results show significant improvements: under balanced loads, THD is reduced by 41.5% (from 1.95% to 1.14%) compared to traditional PI control; under single-phase and three-phase unbalanced loads, THD decreases by 52.7% (2.56% to 1.21%) and 48.1% (2.39% to 1.24%), respectively. The system’s settling time during load transients is shortened by over 30%, and the three-phase current imbalance degree is reduced by 60–70%, which validates the strategy’s effectiveness in enhancing power quality and system stability, thus restoring and maintaining the symmetry of the power output.
- Open Access
Self-Coupling PID Control with Adaptive Transition Function for Enhanced Electronic Throttle Position Tracking
The objective of this study was to enhance the tracking effectiveness of the position adjustment for the electronic throttle in electric vehicles, as well as boost fuel efficiency and the dynamic performance of the vehicles. Firstly, a mathematical model, which pertains to the electronic throttle system, is established, and subsequently, the nonlinear uncertain system is made into a linear uncertain system. Subsequently, a self-coupling PID control law is designed, and an analysis is conducted on the system’s stability and its capacity to reject disturbances. Secondly, taking into consideration that the parameters of the PID controller with self-coupling mechanism are related to the system’s response speed, disturbance rejection capability, and overshoot, a self-adjusting speed factor transition function is put forward to address the conflict between speed and overshoot. Finally, numerical simulations and experimental tests are carried out. The results verify that, compared with the conventional PID controller, ADRC (Active Disturbance Rejection Control), and fuzzy PID, the proposed controller has a faster response speed, higher control accuracy, and better robustness.
Open AccessSelf-Coupling PID Control with Adaptive Transition Function for Enhanced Electronic Throttle Position Tracking
The objective of this study was to enhance the tracking effectiveness of the position adjustment for the electronic throttle in electric vehicles, as well as boost fuel efficiency and the dynamic performance of the vehicles. Firstly, a mathematical model, which pertains to the electronic throttle system, is established, and subsequently, the nonlinear uncertain system is made into a linear uncertain system. Subsequently, a self-coupling PID control law is designed, and an analysis is conducted on the system’s stability and its capacity to reject disturbances. Secondly, taking into consideration that the parameters of the PID controller with self-coupling mechanism are related to the system’s response speed, disturbance rejection capability, and overshoot, a self-adjusting speed factor transition function is put forward to address the conflict between speed and overshoot. Finally, numerical simulations and experimental tests are carried out. The results verify that, compared with the conventional PID controller, ADRC (Active Disturbance Rejection Control), and fuzzy PID, the proposed controller has a faster response speed, higher control accuracy, and better robustness.
- Retracted
- 31 May 2020
- Published by SAGE Publications in International Journal of Electrical Engineering & Education
- Vol. 60 (1_suppl) , 971-980
RETRACTED: Control strategy and security of small and medium-sized wind power grid-connected inverter
Smart city has become an important direction of urban development. Focusing on the construction of smart city, it can reflect the ideal practical effect in many aspects, effectively improve the level of urban development and operation, and also show better in urban planning. Strong influence requires urban planning for adaptive adjustment. This paper from the core of a small wind power system is the grid-connected inverter. According to the main topology of small wind power generation inverter and grid-connected system, a systematic modeling of small wind power generation system is built. In order to make up for the deficiency of the traditional control strategy for small wind power grid-connected inverter, this paper puts forward a fuzzy control and quasi-PR control method to be applied to the synchronization control of grid-connected inverter. The simulation experiment is conducted by using MATLAB/SIMULINK platform, and the test is conducted by means of combining self-designed system hardware circuit, and the results show that compared with the PR method, the grid current synchronization error can be reduced to smaller, adaptability, and anti-disturbance can be greatly improved through the proposed method and, consequently, has a better application value for small wind power grid-connected inverter.
- 31 May 2020
- Published by SAGE Publications in International Journal of Electrical Engineering & Education
- Vol. 60 (1_suppl) , 971-980
RetractedRETRACTED: Control strategy and security of small and medium-sized wind power grid-connected inverter
Smart city has become an important direction of urban development. Focusing on the construction of smart city, it can reflect the ideal practical effect in many aspects, effectively improve the level of urban development and operation, and also show better in urban planning. Strong influence requires urban planning for adaptive adjustment. This paper from the core of a small wind power system is the grid-connected inverter. According to the main topology of small wind power generation inverter and grid-connected system, a systematic modeling of small wind power generation system is built. In order to make up for the deficiency of the traditional control strategy for small wind power grid-connected inverter, this paper puts forward a fuzzy control and quasi-PR control method to be applied to the synchronization control of grid-connected inverter. The simulation experiment is conducted by using MATLAB/SIMULINK platform, and the test is conducted by means of combining self-designed system hardware circuit, and the results show that compared with the PR method, the grid current synchronization error can be reduced to smaller, adaptability, and anti-disturbance can be greatly improved through the proposed method and, consequently, has a better application value for small wind power grid-connected inverter.
- Open Access
- 1 January 2017
- Published by Atlantis Press SARL
Optimization of Control System Structure and Practice in Engineering Education
- 1 January 2017
- Published by Atlantis Press SARL
Open AccessOptimization of Control System Structure and Practice in Engineering Education