Sofia Julin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sofia Julin has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Veikko Linko
Institute of Technology University of Tartu Tartu Estonia
9 shared publications - Mauri Aleksi Kostiainen
Department of Bioproducts and Biosystems, Aalto University, 00076 Aalto, Finland
8 shared publications - Boxuan Shen
Department of Medical Biochemistry and Biophysics, Karolinska Institutet, Stockholm, Sweden
3 shared publications - Nonappa
Chemistry and Advanced Materials, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
3 shared publications - Eduardo Anaya-Plaza
Department of Bioproducts and Biosystems, Aalto University, 00076 Aalto, Finland
2 shared publications - Adrian Keller
Technical and Macromolecular Chemistry Paderborn University Paderborn Germany
1 shared publication
Latest Publications
- Open Access
- 20 July 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Designed β-hairpin switches for controllable mechanical properties
Nature achieves extraordinary mechanical performance by precisely regulating β-structure formation in proteins such as fibroin, elastin, and resilin. Replicating this level of structural control remains a major challenge in protein engineering. Here, we integrate biomimetic design with deep learning–guided de novo protein engineering to create environmentally responsive β-hairpin peptides. Computational optimization enhanced β-hairpin propensity, hydrophilicity, and solvent accessibility while preserving high aqueous solubility. The peptides remain intrinsically disordered in solution but rapidly undergo a β-hairpin transition upon exposure to minimal concentrations of sodium dodecyl sulfate (SDS), a model amphiphilic trigger. This structural conversion drives assembly into mechanically reinforced materials exhibiting increased stiffness and hardness relative to the unfolded state. Our findings provide mechanistic insight into regulated β-structure formation and demonstrate a scalable strategy for programming environmentally triggered protein folding, hierarchical assembly, and mechanical function, opening new opportunities for the rational design of next-generation adaptive biomaterials.
- 20 July 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Open AccessDesigned β-hairpin switches for controllable mechanical properties
Nature achieves extraordinary mechanical performance by precisely regulating β-structure formation in proteins such as fibroin, elastin, and resilin. Replicating this level of structural control remains a major challenge in protein engineering. Here, we integrate biomimetic design with deep learning–guided de novo protein engineering to create environmentally responsive β-hairpin peptides. Computational optimization enhanced β-hairpin propensity, hydrophilicity, and solvent accessibility while preserving high aqueous solubility. The peptides remain intrinsically disordered in solution but rapidly undergo a β-hairpin transition upon exposure to minimal concentrations of sodium dodecyl sulfate (SDS), a model amphiphilic trigger. This structural conversion drives assembly into mechanically reinforced materials exhibiting increased stiffness and hardness relative to the unfolded state. Our findings provide mechanistic insight into regulated β-structure formation and demonstrate a scalable strategy for programming environmentally triggered protein folding, hierarchical assembly, and mechanical function, opening new opportunities for the rational design of next-generation adaptive biomaterials.
- Open Access
- 19 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (28) , 13407-13415
Structural stability of DNA origami nanostructures in organic solvents
The post-folding structural stability of DNA origami was studied in water-miscible organic solvents. While DNA origami remains stable in high acetone and ethanol concentrations, it degrades more rapidly in the presence of DMF and DMSO.
- 19 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (28) , 13407-13415
Open AccessStructural stability of DNA origami nanostructures in organic solvents
The post-folding structural stability of DNA origami was studied in water-miscible organic solvents. While DNA origami remains stable in high acetone and ethanol concentrations, it degrades more rapidly in the presence of DMF and DMSO.
- Open Access
- 9 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (99) , 14701-14704
Assembly and optically triggered disassembly of lipid–DNA origami fibers
DNA origami and a photosensitive lipid are co-assembled into ordered fibers, which can be disassembled through UV-A light exposure.
- 9 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (99) , 14701-14704
Open AccessAssembly and optically triggered disassembly of lipid–DNA origami fibers
DNA origami and a photosensitive lipid are co-assembled into ordered fibers, which can be disassembled through UV-A light exposure.
- Open Access
Reconfigurable pH-Responsive DNA Origami Lattices
DNA nanotechnology enables straightforward fabrication of user-defined and nano-meter-precise templates for a cornucopia of different uses. To date, most of these DNA assemblies have been static, but dynamic structures are increasingly coming into view. The programmability of DNA not only allows encoding of the DNA object shape, but it may be equally used in defining the mechanism of action and the type of stimuli-responsiveness of the dynamic structures. However, these "robotic" features of DNA nanostructures are usually demonstrated for only small, discrete and device-like objects rather than for collectively behaving higher-order systems. Here, we show how a large-scale, two-dimensional (2D) and pH-responsive DNA origami -based lattice can be assembled on a mica substrate and further reversibly switched between two distinct states upon the pH change of the surrounding solution. The control over these two configurations is achieved by equipping the arms of the lattice-forming DNA origami units with "pH-latches" that form Hoogsteen-type triplexes at low pH. In a nutshell, we demonstrate how the electrostatic control over the adhesion and mobility of the DNA origami units on the surface can be used both in the large lattice formation (with the help of directed polymerization) and in the conformational switching of the whole lattice on the substrate. To further emphasize the feasibility of the method, we also demonstrate the formation of reconfigurable 2D gold nanoparticle lattices. We believe this work serves as an important milestone in bridging the nanometer-precise DNA origami templates and higher-order large-scale systems with the stimuli-induced dynamicity.
Open AccessReconfigurable pH-Responsive DNA Origami Lattices
DNA nanotechnology enables straightforward fabrication of user-defined and nano-meter-precise templates for a cornucopia of different uses. To date, most of these DNA assemblies have been static, but dynamic structures are increasingly coming into view. The programmability of DNA not only allows encoding of the DNA object shape, but it may be equally used in defining the mechanism of action and the type of stimuli-responsiveness of the dynamic structures. However, these "robotic" features of DNA nanostructures are usually demonstrated for only small, discrete and device-like objects rather than for collectively behaving higher-order systems. Here, we show how a large-scale, two-dimensional (2D) and pH-responsive DNA origami -based lattice can be assembled on a mica substrate and further reversibly switched between two distinct states upon the pH change of the surrounding solution. The control over these two configurations is achieved by equipping the arms of the lattice-forming DNA origami units with "pH-latches" that form Hoogsteen-type triplexes at low pH. In a nutshell, we demonstrate how the electrostatic control over the adhesion and mobility of the DNA origami units on the surface can be used both in the large lattice formation (with the help of directed polymerization) and in the conformational switching of the whole lattice on the substrate. To further emphasize the feasibility of the method, we also demonstrate the formation of reconfigurable 2D gold nanoparticle lattices. We believe this work serves as an important milestone in bridging the nanometer-precise DNA origami templates and higher-order large-scale systems with the stimuli-induced dynamicity.
- 6 October 2020
- Published by Wiley in Angewandte Chemie
- Vol. 133 (2) , 840-846
DNA‐Origami‐Templated Growth of Multilamellar Lipid Assemblies
Lipids are important building blocks in cellular compartments, and therefore their self‐assembly into well‐defined hierarchical structures has gained increasing interest. Cationic lipids and unstructured DNA can co‐assemble into highly ordered structures (lipoplexes), but potential applications of lipoplexes are still limited. Using scaffolded DNA origami nanostructures could aid in resolving these drawbacks. Here, we have complexed DNA origami together with a cationic lipid 1,2‐dioleoly‐3‐trimethylammonium‐propane (DOTAP) and studied their self‐assembly driven by electrostatic and hydrophobic interactions. The results suggest that the DNA origami function as templates for the growth of multilamellar lipid structures and that the DNA origami are embedded in the formed lipid matrix. Furthermore, the lipid encapsulation was found to significantly shield the DNA origami against nuclease digestion. The presented complexation strategy is suitable for a wide range of DNA‐based templates and could therefore find uses in construction of cell‐membrane‐associated components.
- 6 October 2020
- Published by Wiley in Angewandte Chemie
- Vol. 133 (2) , 840-846
DNA‐Origami‐Templated Growth of Multilamellar Lipid Assemblies
Lipids are important building blocks in cellular compartments, and therefore their self‐assembly into well‐defined hierarchical structures has gained increasing interest. Cationic lipids and unstructured DNA can co‐assemble into highly ordered structures (lipoplexes), but potential applications of lipoplexes are still limited. Using scaffolded DNA origami nanostructures could aid in resolving these drawbacks. Here, we have complexed DNA origami together with a cationic lipid 1,2‐dioleoly‐3‐trimethylammonium‐propane (DOTAP) and studied their self‐assembly driven by electrostatic and hydrophobic interactions. The results suggest that the DNA origami function as templates for the growth of multilamellar lipid structures and that the DNA origami are embedded in the formed lipid matrix. Furthermore, the lipid encapsulation was found to significantly shield the DNA origami against nuclease digestion. The presented complexation strategy is suitable for a wide range of DNA‐based templates and could therefore find uses in construction of cell‐membrane‐associated components.
- 6 October 2020
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (2) , 827-833
DNA‐Origami‐Templated Growth of Multilamellar Lipid Assemblies
Lipids are important building blocks in cellular compartments, and therefore their self‐assembly into well‐defined hierarchical structures has gained increasing interest. Cationic lipids and unstructured DNA can co‐assemble into highly ordered structures (lipoplexes), but potential applications of lipoplexes are still limited. Using scaffolded DNA origami nanostructures could aid in resolving these drawbacks. Here, we have complexed DNA origami together with a cationic lipid 1,2‐dioleoly‐3‐trimethylammonium‐propane (DOTAP) and studied their self‐assembly driven by electrostatic and hydrophobic interactions. The results suggest that the DNA origami function as templates for the growth of multilamellar lipid structures and that the DNA origami are embedded in the formed lipid matrix. Furthermore, the lipid encapsulation was found to significantly shield the DNA origami against nuclease digestion. The presented complexation strategy is suitable for a wide range of DNA‐based templates and could therefore find uses in construction of cell‐membrane‐associated components.
- 6 October 2020
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 60 (2) , 827-833
DNA‐Origami‐Templated Growth of Multilamellar Lipid Assemblies
Lipids are important building blocks in cellular compartments, and therefore their self‐assembly into well‐defined hierarchical structures has gained increasing interest. Cationic lipids and unstructured DNA can co‐assemble into highly ordered structures (lipoplexes), but potential applications of lipoplexes are still limited. Using scaffolded DNA origami nanostructures could aid in resolving these drawbacks. Here, we have complexed DNA origami together with a cationic lipid 1,2‐dioleoly‐3‐trimethylammonium‐propane (DOTAP) and studied their self‐assembly driven by electrostatic and hydrophobic interactions. The results suggest that the DNA origami function as templates for the growth of multilamellar lipid structures and that the DNA origami are embedded in the formed lipid matrix. Furthermore, the lipid encapsulation was found to significantly shield the DNA origami against nuclease digestion. The presented complexation strategy is suitable for a wide range of DNA‐based templates and could therefore find uses in construction of cell‐membrane‐associated components.
- Open Access
- 27 May 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (53) , 7341-7344
Phthalocyanine–DNA origami complexes with enhanced stability and optical properties
In this communication, electrostatically assembled phthalocyanine (Pc)–DNA origami (DO) complexes are formed and their optical properties are demonstrated. The formation of the complex prevents the Pc aggregation, thus yielding an enhanced optical response and photooxidative resilience towards aggregation in biologically relevant media. Simultaneously, the Pc protects the DO against enzymatic digestion. Both features solve previous drawbacks associated with phthalocyanine photosensitizers and DNA nanocarriers. The studied complexes may find use in technologies related to the photogeneration of singlet oxygen, e.g., photocatalysis, diagnositic arrays and photodynamic therapy.
- 27 May 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (53) , 7341-7344
Open AccessPhthalocyanine–DNA origami complexes with enhanced stability and optical properties
In this communication, electrostatically assembled phthalocyanine (Pc)–DNA origami (DO) complexes are formed and their optical properties are demonstrated. The formation of the complex prevents the Pc aggregation, thus yielding an enhanced optical response and photooxidative resilience towards aggregation in biologically relevant media. Simultaneously, the Pc protects the DO against enzymatic digestion. Both features solve previous drawbacks associated with phthalocyanine photosensitizers and DNA nanocarriers. The studied complexes may find use in technologies related to the photogeneration of singlet oxygen, e.g., photocatalysis, diagnositic arrays and photodynamic therapy.
- Open Access
- 27 September 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 151,p. e60313
DNA Origami-Mediated Substrate Nanopatterning of Inorganic Structures for Sensing Applications
Structural DNA nanotechnology provides a viable route for building from the bottom-up using DNA as construction material. The most common DNA nanofabrication technique is called DNA origami, and it allows high-throughput synthesis of accurate and highly versatile structures with nanometer-level precision. Here, it is shown how the spatial information of DNA origami can be transferred to metallic nanostructures by combining the bottom-up DNA origami with the conventionally used top-down lithography approaches. This allows fabrication of billions of tiny nanostructures in one step onto selected substrates. The method is demonstrated using bowtie DNA origami to create metallic bowtie-shaped antenna structures on silicon nitride or sapphire substrates. The method relies on the selective growth of a silicon oxide layer on top of the origami deposition substrate, thus resulting in a patterning mask for following lithographic steps. These nanostructure-equipped surfaces can be further used as molecular sensors (e.g., surface-enhanced Raman spectroscopy (SERS)) and in various other optical applications at the visible wavelength range owing to the small feature sizes (sub-10 nm). The technique can be extended to other materials through methodological modifications; therefore, the resulting optically active surfaces may find use in development of metamaterials and metasurfaces.
- 27 September 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 151,p. e60313
Open AccessDNA Origami-Mediated Substrate Nanopatterning of Inorganic Structures for Sensing Applications
Structural DNA nanotechnology provides a viable route for building from the bottom-up using DNA as construction material. The most common DNA nanofabrication technique is called DNA origami, and it allows high-throughput synthesis of accurate and highly versatile structures with nanometer-level precision. Here, it is shown how the spatial information of DNA origami can be transferred to metallic nanostructures by combining the bottom-up DNA origami with the conventionally used top-down lithography approaches. This allows fabrication of billions of tiny nanostructures in one step onto selected substrates. The method is demonstrated using bowtie DNA origami to create metallic bowtie-shaped antenna structures on silicon nitride or sapphire substrates. The method relies on the selective growth of a silicon oxide layer on top of the origami deposition substrate, thus resulting in a patterning mask for following lithographic steps. These nanostructure-equipped surfaces can be further used as molecular sensors (e.g., surface-enhanced Raman spectroscopy (SERS)) and in various other optical applications at the visible wavelength range owing to the small feature sizes (sub-10 nm). The technique can be extended to other materials through methodological modifications; therefore, the resulting optically active surfaces may find use in development of metamaterials and metasurfaces.
- Open Access
- 21 February 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (10) , 4546-4551
DNA origami directed 3D nanoparticle superlattice via electrostatic assembly
DNA origami is used to direct the formation of well-ordered 3D nanoparticle superlattices held together by electrostatic interactions.
- 21 February 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (10) , 4546-4551
Open AccessDNA origami directed 3D nanoparticle superlattice via electrostatic assembly
DNA origami is used to direct the formation of well-ordered 3D nanoparticle superlattices held together by electrostatic interactions.
- Open Access
- 27 April 2018
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 20 (5) , 1-11
DNA nanostructure-directed assembly of metal nanoparticle superlattices
Structural DNA nanotechnology provides unique, well-controlled, versatile, and highly addressable motifs and templates for assembling materials at the nanoscale. These methods to build from the bottom-up using DNA as a construction material are based on programmable and fully predictable Watson-Crick base pairing. Researchers have adopted these techniques to an increasing extent for creating numerous DNA nanostructures for a variety of uses ranging from nanoelectronics to drug-delivery applications. Recently, an increasing effort has been put into attaching nanoparticles (the size range of 1–20 nm) to the accurate DNA motifs and into creating metallic nanostructures (typically 20–100 nm) using designer DNA nanoshapes as molds or stencils. By combining nanoparticles with the superior addressability of DNA-based scaffolds, it is possible to form well-ordered materials with intriguing and completely new optical, plasmonic, electronic, and magnetic properties. This focused review discusses the DNA structure-directed nanoparticle assemblies covering the wide range of different one-, two-, and three-dimensional systems.
- 27 April 2018
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 20 (5) , 1-11
Open AccessDNA nanostructure-directed assembly of metal nanoparticle superlattices
Structural DNA nanotechnology provides unique, well-controlled, versatile, and highly addressable motifs and templates for assembling materials at the nanoscale. These methods to build from the bottom-up using DNA as a construction material are based on programmable and fully predictable Watson-Crick base pairing. Researchers have adopted these techniques to an increasing extent for creating numerous DNA nanostructures for a variety of uses ranging from nanoelectronics to drug-delivery applications. Recently, an increasing effort has been put into attaching nanoparticles (the size range of 1–20 nm) to the accurate DNA motifs and into creating metallic nanostructures (typically 20–100 nm) using designer DNA nanoshapes as molds or stencils. By combining nanoparticles with the superior addressability of DNA-based scaffolds, it is possible to form well-ordered materials with intriguing and completely new optical, plasmonic, electronic, and magnetic properties. This focused review discusses the DNA structure-directed nanoparticle assemblies covering the wide range of different one-, two-, and three-dimensional systems.