Alla Bessmertnykh-Lemeune has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and Functional Properties of Fluorinated Phosphonate‐Substituted Porphyrins: Excellent Photosensitizers and Robust Precursors for Photoactive Langmuir–Schaefer Films

    by Azhar Kechiche, Cyrille Monnereau, Chantal Andraud, Alla Bessmertnykh‐Lemeune, Yoann Rousselin, Andrey V. Cheprakov, Elizaveta V. Ermakova, Alexandra I. Zvyagina, Habib Nasri

    Fluorinated porphyrins have attracted considerable attention in PDT, sensing and catalysis. Guided by demands for functional porphyrins with tunable electronic properties, high photostability, and controlled supramolecular organization, we report a synthetic approach to meso ‐tetrakis[4‐(diethoxyphosphoryl)‐2,3,5,6‐tetrafluorophenyl]porphyrin (H 2 TF 4 PPP), which combines the advantages of diethyl phosphonate and fluorine substituents within a highly symmetrical porphyrin molecule. X‐ray diffraction analysis of H 2 TF 4 PPP reveals that diethyl phosphonates govern the crystal packing, while the macrocycles avoid π–π stacking. Zn(II) and Pd(II) complexes with H 2 TF 4 PPP were prepared in high yields. In contrast, insertion of In(III) ions exhibiting strong Lewis acidity was accompanied by partial hydrolysis of phosphonate groups. H 2 TF 4 PPP and its Zn(II) and Pd(II) complexes efficiently generate singlet oxygen displaying a good solubility in various organic solvents. The noble‐metal‐free porphyrin H 2 TF 4 PPP surpasses Pd(II) complex of non‐fluorinated analogue (PdTPPP) in photocatalytic performance, enabling sustainable oxidation of sulfides to sulfoxides with oxygen. H 2 TF 4 PPP forms a stable Langmuir monolayer which can be transferred onto solid substrates, yielding dense single‐layer films containing fiber‐shaped nanoparticles. The films thus obtained are emissive and their photostability surpasses that of H 2 TPPP films. Water‐soluble porphyrins H 2 TF 4 PPP‐A and PdTF 4 PPP‐A with phosphonic acid groups were also prepared and briefly investigated.


  • Effect of Diethyl Phosphonate Substituents on the Supramolecular Organization and Optical Response of Porphyrin Langmuir–Blodgett and Langmuir–Schaefer Films

    by Elizaveta V. Ermakova, Alexandra I. Zvyagina, Alla Bessmertnykh-Lemeune

    A great amount of attention is currently being paid to the development of low-dimensional nanoarchitectonics, such as functional films, that exhibit highly sensitive and selective optical responses to analytes. Porphyrins are particularly attractive for this field due to their outstanding optical and coordination properties. In this work, systematic comparative studies were carried out on Langmuir monolayers and Langmuir–Blodgett (LB) and Langmuir–Schaefer (LS) films of sterically hindered, hydrophobic meso-tetra(mesityl)porphyrin (H2TMP) and its phosphonate-substituted analogue H2DMDPP, in which two mesityl groups are replaced by bulky PO3Et2 substituents. Both porphyrins form densely packed LB and LS nanoscale films on hydrophilic and hydrophobic solid substrates. The introduction of two hydrophilic phosphonate groups is critical for controlling monolayer organization at the air–water interface and on solid supports. The structural differences of the films translate to pronounced changes in optical properties, film stability, and pH sensing performance. Importantly, the transfer mode of the Langmuir monolayer (perpendicular (LB) vs parallel (LS)) is as decisive for sensor performance as the molecular structure of the porphyrin itself. All studied single-layer films exhibited pH sensitivity, allowing the spectral detection of HCl vapors. However, a visual fluorescence response toward this analyte was observed exclusively for LB films of H2DMDPP, likely due to the high emissivity of these films.


  • Open Access

    Indium Imidazo[4,5,-b]porphyrins as Photocatalysts for Oxidation of Sulfides

    by Inna A. Abdulaeva, Mikhail A. Filatov, Azhar Kechiche, Alla Bessmertnykh-Lemeune

    Over the past two decades, the application of photocatalytic reactions in organic synthesis has increased remarkably. Porphyrins, renowned for their exceptional photophysical properties, photostability, and prevalence in natural catalytic processes, are attracting significant attention as promising photocatalysts for reactions proceeding through energy transfer and one-electron transfer. In this work, we synthesized the indium(III) complex of 2-[4-(diethoxyphosphoryl)phenyl]-1H-imidazo[4,5-b]-5,10,15,20-tetramesitylporphyrin (InTMPIP) and explored its application as a photocatalyst for the oxidation of sulfides by dioxygen or air. Complex InTMPIP was found to generate singlet oxygen with quantum yield of 0.92 (toluene) and enables efficient photooxidation of sulfides to sulfoxides by dioxygen in “green” acetonitrile/water (4:1 v/v) or methanol/chloroform (2:1 v/v) solvent mixtures with almost quantitative yield. Furthermore, InTMPIP was grafted onto hydrated mesoporous titania and materials InTMPIP/TiO2-1 and InTMPIP/TiO2-2 with different In/Ti ratios were obtained and investigated. The composition and structure of the materials were studied using a combination of elemental analysis, various spectroscopic methods, gas adsorption measurements, and SEM imaging. Finally, the photocatalytic efficiency of InTMPIP/TiO2-2 was explored in aerobic photooxidation of sulfides. The heterogenized complex enables selective synthesis of sulfoxides under “green” conditions; however, it is prone to leaching into the solution when irradiated with both blue and red LEDs.


  • Supramolecular assembly of phosphonate-substituted porphyrins in Langmuir layers and Langmuir–Schäfer films: structural studies and selective sensing of pyridine vapors

    by Elizaveta V. Ermakova, Vladimir V. Arslanov, Yann Bretonnière, Carine Michel, Alla Bessmertnykh-Lemeune

    The fabrication of porphyrin-based 2D materials is of great interest because they are valuable in molecular electronics, photovoltaic cells, thermoelectric energy harvesting, gas sensory and medicine. In this work, interfacial behavior of porphyrins bearing two, four and eight diethyl phosphonate (P(O)(OEt)2) groups at the periphery of the tetrapyrrolic macrocycle was investigated to demonstrate the influence of the number of these hydrophilic and voluminous groups bearing three Lewis basic centers on the structure of porphyrin monolayers and films. The morphology and optical properties of the Langmuir layers formed by these porphyrins on the water surface has been studied by in situ UV-vis and fluorescence spectroscopies and Brewster angle microscopy (BAM). Monolayers were successfully transferred onto both hydrophilic and hydrophobic solid substrates (mica and polyvinyl chloride (PVC)) by the Langmuir–Schäfer (LS) technique and the films thus obtained were studied by absorption and fluorescence spectroscopies and atomic force microscopy (AFM). These systematic studies demonstrated that the P(O)(OEt)2 substituent plays a key role in the organization of Langmuir monolayers and their transfer onto solid surfaces. The replacement of traditionally investigated meso-substituted porphyrins with β-octa-functionalized derivatives allows for decreasing π–π stacking interactions in the monolayers without significantly reducing their stability and the efficiency of their transfer onto solid supports. The optical properties of H2OPPP are tuned by lateral compression at the air–water interface but are preserved after transfer of Langmuir layers onto PVC. In contrast to many porphyrin films reported previously, LB films of MOPPP (M = H2, Zn, Ni) transferred at 18 mN m−1 onto a mica substrate are composed of discrete and closely packed monolayer fibrils being homogeneous at the mesoscopic scale. DFT computations were used to gain insight into the structural organization of fibrils by modeling different dimers of ZnOPPP. The monolayer films of H2OPPP are acidochromic and those of ZnOPPP on PVC allow for selective visual sensing of pyridine vapors. This is an interesting example of a supramolecular sensor in which the selective visual response was achieved by careful optimization of the structure of the monolayer film and sensing procedure.


  • Water-soluble platinum and palladium porphyrins with peripheral ethyl phosphonic acid substituents: synthesis, aggregation in solution, and photocatalytic properties

    by Marina V. Volostnykh, Gayane A. Kirakosyan, Anna A. Sinelshchikova, Elizaveta V. Ermakova, Yulia G. Gorbunova, Aslan Yu. Tsivadze, Sergey M. Borisov, Michel Meyer, Lhoussain Khrouz, Cyrille Monnereau, et al.

    Water-soluble porphyrins have garnered significant attention due to their broad range of applications in biomedicine, catalysis, and material chemistry. In this work, water-soluble platinum(II) and palladium(II) complexes with porphyrins bearing ethyl phosphonate substituents, namely, Pt/Pd 10-(ethoxyhydroxyphosphoryl)-5,15-di(p-carboxyphenyl)porphyrins (M3m, M = Pt(II), Pd(II)) and Pt/Pd 5,10-bis(ethoxyhydroxyphosphoryl)-10,20-diarylporphyrins (M1d–M3d; aryl = p-tolyl (1), mesityl (2), p-carboxyphenyl (3)), were synthesized by alkaline hydrolysis of the corresponding diethyl phosphonates M6m and M4d–M6d. NMR, UV–vis, and fluorescence spectroscopy revealed that the mono-phosphonates M3m tend to form aggregates in aqueous media, while the bis-phosphonates M3d exist predominantly as monomeric species across a wide range of concentrations (10−6–10−3 M), ionic strengths (0–0.81 M), and pH values (4–12). Single-crystal X-ray diffraction studies of the diethyl phosphonates Pt6d and Pd6d revealed that π–π stacking of the aromatic macrocycles is sterically hindered in the crystals, providing a rationale for the low degree of solution aggregation observed for ethyl phosphonate M3d. Photophysical studies of M3m and M1d–M3d demonstrated that these compounds are phosphorescent and generate singlet oxygen in aqueous solutions. Pd(II) complex Pd3d is an excellent photocatalyst for the oxidation of sulfides using di-oxygen in a solvent mixture (MeCN/H2O, 4 : 1 v/v). Under these conditions, various alkyl and aryl sulfides were quantitatively converted into the desired sulfoxides. For the oxygenation of mixed alkyl–aryl sulfides, Pd3d outperforms Pd(II) meso-tetrakis(p-carboxyphenyl)porphyrin (PdTCPP). This photocatalyst can be recycled and reused to afford sulfoxides with no loss of product yield.


  • Open Access

    The Optical Sensing of Volatile Organic Compounds Using Porphyrins

    by Elizaveta V. Ermakova, Alla Bessmertnykh-Lemeune

    The detection of volatile organic compounds (VOCs) is a rapidly growing research area due to the importance of VOCs in environmental pollution, human health assessment, food quality control, and homeland security. Optical sensing materials based on porphyrins are particularly appealing for VOCs detection, owing to availability of porphyrins, their exceptional optical and binding properties, as well as their photo and chemical stability. As research and technology continue to advance, optical sensors involving these materials are expected to play an increasing role in various applications. This article presents an overview of porphyrin-based sensing materials developed for use as optical sensors for VOCs in a gaseous phase. First, sensing films composed exclusively of porphyrin molecules are discussed, followed by the materials obtained by grafting or the incorporation of porphyrins into organic and inorganic polymer matrices. Considering the growing interest in multianalyte analysis with porphyrin-based sensor arrays, special attention is devoted to this area.


  • Open Access

    Optical Sensing Volatile Organic Compounds Using Porphyrins

    by Elizaveta Ermakova, Alla Bessmertnykh-Lemeune

    Detection of volatile organic compounds (VOCs) is a rapidly growing research area due to importance of VOCs in environmental pollution, human health assessment, food quality control, and homeland security. Optical sensing materials based on porphyrins are particularly appealing for VOCs detection, owing to availability of porphyrins, their exceptional optical and binding properties, as well as their photo- and chemical stability. As research and technology continue to advance, optical sensors involving these materials are expected to play an increasing role in various applications. This article presents a comprehensive overview of porphyrin-based sensing materials developed for use as optical sensors for VOCs. First, sensing films composed exclusively of porphyrin molecules are discussed followed by materials obtained by grafting or incorporation of porphyrins into organic and inorganic polymer matrices. Considering growing interest to multianalyte analysis with porphyrin-based sensor arrays, special section is devoted to this area.


  • Preparation of Langmuir–Blodgett Films from Quinoxalines Exhibiting Aggregation-Induced Emission and Their Acidochromism

    by Elizaveta V. Ermakova, Alexandra I. Zvyagina, Alisa D. Kharlamova, Anton S. Abel, Chantal Andraud, Alla Bessmertnykh-Lemeune

    The development of aggregation-induced emission (AIE)-exhibiting compounds heavily relies on our evolving comprehension of their behavior at interfaces, an understanding that still remains notably limited. In this study, we explored the preparation of two-dimensional (2D) sensing films from 2,3-diphenylquinoxaline-based diazapolyoxa- and polyazamacrocycles displaying AIE via the Langmuir-Blodgett (LB) technique. This systematic investigation highlights the key role of the heteroatom-containing tether of 2,3-diphenylquinoxalines in the successful fabrication of Langmuir layers at the air-water interface and the transfer of AIE-emitting supramolecular aggregates onto solid supports. Using both diazapolyoxa- and polyazamacrocycles, we prepared AIE-exhibiting monolayer films containing emissive supramolecular aggregates on silica, mica, and quartz glass and characterized them using ultraviolet-visible (UV-vis) and photoluminescence (PL) spectroscopies, atomic force microscopy (AFM) imaging, and fluorescence microscopy. We also obtained multilayer AIE-emitting films through the LB technique, albeit with increased complexity. Remarkably, by employing the smallest macrocycle N(2)C(3)Q, we successfully prepared LB films suitable for the visual detection of acidic vapors. This sensing material, which contains a much lesser amount of organic dye compared with traditional drop-cast films, can be regenerated and utilized for real-life sample analysis, such as monitoring the presence of ammonia in the air and the freshness of meat.


  • Quinoxaline-based azamacrocycles: synthesis, AIE behavior and acidochromism

    by Alisa D. Kharlamova, Elizaveta V. Ermakova, Anton S. Abel, Victoria E. Gontcharenko, Andrei V. Cheprakov, Alexei D. Averin, Irina P. Beletskaya, Chantal Andraud, Yann Bretonnière, Alla Bessmertnykh-Lemeune

    The development of luminescent molecular materials has advanced rapidly in recent decades, primarily driven by the synthesis of novel emissive compounds and a deeper understanding of excited-state mechanisms. Herein, we report a streamlined synthetic approach to light-emitting diazapolyoxa- and polyazamacrocycles N2CnOxQ and NyCnQ (n = 3–10; x = 2, 3; y = 2–5), incorporating a 2,3-diphenylquinoxaline residue (DPQ). This synthetic strategy based on macrocyclization through Pd-catalyzed amination reaction yields the target macrocycles in good or high yields (46–92%), enabling precise control over their structural parameters. A key role of the PhPF-tBu ligand belonging to the JosiPhos series in this macrocyclization was elucidated through DFT computation. This macrocyclization reaction eliminates the need for complex protecting-deprotecting procedures of secondary amine groups, offering a convenient and scalable method for the preparation of target compounds. Moreover, it boasts a potentially broad substrate scope, making it promising for structure-properties studies within photophysics, sensor development, and material synthesis. Photophysical properties of representative macrocycles were investigated, employing spectroscopic techniques and DFT computation. It was demonstrated that DPQ-containing macrocycles display aggregation-induced emission in a DCM–hexane solvent mixture despite the presence of flexible tethers within their structures. Single-crystal X-ray diffraction analysis of a representative compound N2C8O3Q allowed us to gain deeper insight into its molecular structure and AIE behaviour. The emissive aggregates of the N2C10O3Q macrocycle were immobilized on filter paper yielding AIE-exhibiting test strips for measuring acidity in vapors and in aqueous media.


  • Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts

    by Azhar Kechiche, Shaymaa Al Shehimy, Lhoussain Khrouz, Cyrille Monnereau, Christophe Bucher, Stephane Parola, Alla Bessmertnykh-Lemeune, Yoann Rousselin, Andrei Vladimirovich Cheprakov, Habib Nasri

    Incorporating phosphonate groups onto the phenyl substituents of meso -tetraphenylporphyrins proves advantageous for their utilization in photocatalysis.