Martin Eckardt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martin Eckardt has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Thomas J. Simat
Chair of Food Contact Materials, Dresden University of Technology, Dresden, Germany
11 shared publications Marie Kubicova
Chair for Food Chemistry and Food and Skin Contact Materials, Technische Universität Dresden, Dresden, Germany
2 shared publications- Marie Kubicova
Chair for Food Chemistry and Food and Skin Contact Materials, Technische Universität Dresden, Dresden, Germany
2 shared publications Ann-Kathrin Seidel
TU Dresden, Chair of Food Science and Food Contact Materials, Bergstr. 66, 01062, Dresden, Germany
1 shared publicationAnnemarie Greb
A Food Chemistry and Food and Skin Contact Materials , Technische Universität Dresden , Dresden , Germany
1 shared publicationDuyen Tong
Chair for Food Chemistry and Food and Skin Contact Materials, Technische Universität Dresden, Dresden, Germany
1 shared publication
Latest Publications
- 25 July 2023
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 40 (8) , 1074-1095
Migration of oligomers from Tritan™ copolyester: application of hydrolysis for overall oligomer determination
Tritan™ (a kind of glycol-modified polycyclohexylene dimethylene terephthalate) is a novel copolyester mainly in use for the production of sports bottles and food storage containers. Oligomers in three food-grade Tritan™ samples were identified after dissolution-precipitation by high performance liquid chromatography with diode array detection and mass spectrometry and quantified after alkaline hydrolysis to the monomers. The obtained overall oligomer content in silico oligomer evaluation according to the threshold of toxicological concern concept, no exceedances of daily thresholds for oligomers are expected from a proper use of Tritan™ drinking bottles, even with hot drinks.
- 25 July 2023
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 40 (8) , 1074-1095
Migration of oligomers from Tritan™ copolyester: application of hydrolysis for overall oligomer determination
Tritan™ (a kind of glycol-modified polycyclohexylene dimethylene terephthalate) is a novel copolyester mainly in use for the production of sports bottles and food storage containers. Oligomers in three food-grade Tritan™ samples were identified after dissolution-precipitation by high performance liquid chromatography with diode array detection and mass spectrometry and quantified after alkaline hydrolysis to the monomers. The obtained overall oligomer content in silico oligomer evaluation according to the threshold of toxicological concern concept, no exceedances of daily thresholds for oligomers are expected from a proper use of Tritan™ drinking bottles, even with hot drinks.
- 7 October 2022
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 39 (12) , 2002-2023
Oligomers in polybutylene terephthalate for food contact—strategies on identification, quantification, and risk assessment
Oligomers are a significant group of migrating substances from food contact materials made of polyesters like polybutylene terephthalate (PBT). Twenty-three cyclic and linear oligomers with different end groups including olefin-terminated oligomers, which are associated with thermal stress of the material, were tentatively identified in PBT extracts by high-performance liquid chromatography with mass spectrometry and diode array detection. Quantification approaches based on chromophore concentration, relative response factors, and overall oligomer determination after hydrolysis to the monomer terephthalic acid were employed. An exhaustive extraction of thirteen PBT samples yielded an overall oligomer content of 1.87–6.10 mg/g material (sum of individual oligomers < 1,000 Da) with a predominant content of cyclic over linear oligomers. Migration experiments were performed according to Regulation (EU) No. 10/2011 using the official food simulants as well as cows’ milk. A total of 218 µg cyclic oligomers/L milk were detected in the third migrate relevant for risk assessment of repeated-use articles under hot-fill conditions (70 °C, 2 h). The official food simulant for milk, 50% ethanol, was found to overestimate the actual migration into milk by a factor of four. Frying conditions using sunflower oil as the food simulant (200 °C, 10 min) resulted in a migration of 7.5 mg cyclic oligomers/kg oil. The exposure to migrating oligomers is critical in some scenarios when evaluated by the threshold of toxicological concern concept; however, the toxicological evaluation poses a challenge due to the possible hydrolysis of cyclic oligomers in the human gastrointestinal tract. Our experiments display the need for a toxicological evaluation of PBT oligomers because the migration of cyclic oligomers is expected to exceed the current in silico–based thresholds under foreseeable conditions of use.
- 7 October 2022
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 39 (12) , 2002-2023
Oligomers in polybutylene terephthalate for food contact—strategies on identification, quantification, and risk assessment
Oligomers are a significant group of migrating substances from food contact materials made of polyesters like polybutylene terephthalate (PBT). Twenty-three cyclic and linear oligomers with different end groups including olefin-terminated oligomers, which are associated with thermal stress of the material, were tentatively identified in PBT extracts by high-performance liquid chromatography with mass spectrometry and diode array detection. Quantification approaches based on chromophore concentration, relative response factors, and overall oligomer determination after hydrolysis to the monomer terephthalic acid were employed. An exhaustive extraction of thirteen PBT samples yielded an overall oligomer content of 1.87–6.10 mg/g material (sum of individual oligomers < 1,000 Da) with a predominant content of cyclic over linear oligomers. Migration experiments were performed according to Regulation (EU) No. 10/2011 using the official food simulants as well as cows’ milk. A total of 218 µg cyclic oligomers/L milk were detected in the third migrate relevant for risk assessment of repeated-use articles under hot-fill conditions (70 °C, 2 h). The official food simulant for milk, 50% ethanol, was found to overestimate the actual migration into milk by a factor of four. Frying conditions using sunflower oil as the food simulant (200 °C, 10 min) resulted in a migration of 7.5 mg cyclic oligomers/kg oil. The exposure to migrating oligomers is critical in some scenarios when evaluated by the threshold of toxicological concern concept; however, the toxicological evaluation poses a challenge due to the possible hydrolysis of cyclic oligomers in the human gastrointestinal tract. Our experiments display the need for a toxicological evaluation of PBT oligomers because the migration of cyclic oligomers is expected to exceed the current in silico–based thresholds under foreseeable conditions of use.
- 24 July 2020
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 37 (10) , 1791-1810
Characterisation, release and migration of phenolic compounds from resoles used in polyester-phenol coatings intended for food contact materials
Resoles are multifarious pre-polymeric resins produced by the condensation of basic chemicals phenols, formaldehyde and optionally aliphatic alcohols like butanol. They are widely used as cross-linkers to form resistant internal coatings on metal surfaces of cans, containers or closures. Although the application of resoles is common in food contact, usually little is known about their exact composition, the toxicological hazards of their individual constituents and the migration of phenolic compounds, e.g., of the potentially endocrine-disrupting chemical bisphenol F. Our study fills major gaps of knowledge in risk assessment, using the example of a two-layer polyester-phenol coating system, which is based on three different resoles and is commercially used for closures of infant food glass jars. Various analytical approaches, namely size-exclusion chromatography, nuclear magnetic resonance spectroscopy, liquid chromatography coupled to mass spectrometry, fluorescence and diode array detection as well as gas chromatography-mass spectrometry were evaluated to quantitatively characterise resoles. Additionally, derivatisation with dansyl chloride as well as Folin–Ciocalteu colorimetric assay was adapted first times to determine the total phenol content from technical resoles. Individual mono- and bisphenols were determined in resoles up to about 120 mg/g, while the concentration of bisphenol F isomers was below 10 mg/g. Migration from the coating system was determined after sterilisation (121°C, 1 h, 20% ethanol). Results were ~2 µg/dm2 for identified individual mono-phenols like 2-hydroxybenzyl alcohol and up to ~120 µg/dm2 for total phenolic compounds, representing approximately 7% of the overall migration. The migration of bisphenol F isomers was negligible below 0.3 µg/dm2. Potential exposure to migrating phenols was assessed based on the threshold of toxicological concern concept to be significantly below for individual phenols and in the same order of magnitude for total phenols compared to the respective thresholds calculated for infants.
- 24 July 2020
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 37 (10) , 1791-1810
Characterisation, release and migration of phenolic compounds from resoles used in polyester-phenol coatings intended for food contact materials
Resoles are multifarious pre-polymeric resins produced by the condensation of basic chemicals phenols, formaldehyde and optionally aliphatic alcohols like butanol. They are widely used as cross-linkers to form resistant internal coatings on metal surfaces of cans, containers or closures. Although the application of resoles is common in food contact, usually little is known about their exact composition, the toxicological hazards of their individual constituents and the migration of phenolic compounds, e.g., of the potentially endocrine-disrupting chemical bisphenol F. Our study fills major gaps of knowledge in risk assessment, using the example of a two-layer polyester-phenol coating system, which is based on three different resoles and is commercially used for closures of infant food glass jars. Various analytical approaches, namely size-exclusion chromatography, nuclear magnetic resonance spectroscopy, liquid chromatography coupled to mass spectrometry, fluorescence and diode array detection as well as gas chromatography-mass spectrometry were evaluated to quantitatively characterise resoles. Additionally, derivatisation with dansyl chloride as well as Folin–Ciocalteu colorimetric assay was adapted first times to determine the total phenol content from technical resoles. Individual mono- and bisphenols were determined in resoles up to about 120 mg/g, while the concentration of bisphenol F isomers was below 10 mg/g. Migration from the coating system was determined after sterilisation (121°C, 1 h, 20% ethanol). Results were ~2 µg/dm2 for identified individual mono-phenols like 2-hydroxybenzyl alcohol and up to ~120 µg/dm2 for total phenolic compounds, representing approximately 7% of the overall migration. The migration of bisphenol F isomers was negligible below 0.3 µg/dm2. Potential exposure to migrating phenols was assessed based on the threshold of toxicological concern concept to be significantly below for individual phenols and in the same order of magnitude for total phenols compared to the respective thresholds calculated for infants.
- 3 September 2019
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 36 (12) , 1882-1894
In vitro intestinal digestibility of cyclic aromatic polyester oligomers from polyethylene terephthalate (PET) and polybutylene terephthalate (PBT)
Linear and cyclic oligomers are unavoidable non-intentionally added substances (NIAS) present in food contact materials made from common polyesters such as polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and polyester coatings. Although polyester oligomers can migrate into fats in significant amounts in high-temperature processes such as baking or frying, little is known about their toxicological properties and their behaviour in the human gastrointestinal tract. In the present study, first indications of a possible digestibility of polyester oligomers formed from the commonly used aromatic dicarboxylic acid terephthalic acid (TPA) are provided by in vitro experiments. Three cyclic polyester oligomers originated from PET (trimer) and PBT (dimer and trimer) were extracted from the raw materials, isolated and subjected to a simulated intestinal digestion. A fast cleavage (≥75% of the initial amount) of all three cyclic oligomers into their linear counterparts was detected already within the first hour of in vitro intestinal incubation. Subsequent hydrolysis to shorter chained linear oligomers was determined especially for the PET cyclic trimer. Degradation down to the monomer TPA was not observed. In terms of risk assessment and prioritisation for non-evaluated NIAS, the threshold of toxicological concern (TTC) concept is an appropriate tool. While cyclic polyester oligomers based on TPA are assigned to the TTC Cramer class III (high potential concern, exposure threshold 1.5 µg/kg body weight per day), the corresponding linear oligomers are expected to be of a lower probable toxicological concern (Cramer class I, 30 µg/kg body weight per day). A cleavage of cyclic polyester oligomers under human intestinal conditions, which was assessed to be likely by the provided in vitro experiments, could consequently affect the risk assessment on polyester oligomers.
- 3 September 2019
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 36 (12) , 1882-1894
In vitro intestinal digestibility of cyclic aromatic polyester oligomers from polyethylene terephthalate (PET) and polybutylene terephthalate (PBT)
Linear and cyclic oligomers are unavoidable non-intentionally added substances (NIAS) present in food contact materials made from common polyesters such as polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and polyester coatings. Although polyester oligomers can migrate into fats in significant amounts in high-temperature processes such as baking or frying, little is known about their toxicological properties and their behaviour in the human gastrointestinal tract. In the present study, first indications of a possible digestibility of polyester oligomers formed from the commonly used aromatic dicarboxylic acid terephthalic acid (TPA) are provided by in vitro experiments. Three cyclic polyester oligomers originated from PET (trimer) and PBT (dimer and trimer) were extracted from the raw materials, isolated and subjected to a simulated intestinal digestion. A fast cleavage (≥75% of the initial amount) of all three cyclic oligomers into their linear counterparts was detected already within the first hour of in vitro intestinal incubation. Subsequent hydrolysis to shorter chained linear oligomers was determined especially for the PET cyclic trimer. Degradation down to the monomer TPA was not observed. In terms of risk assessment and prioritisation for non-evaluated NIAS, the threshold of toxicological concern (TTC) concept is an appropriate tool. While cyclic polyester oligomers based on TPA are assigned to the TTC Cramer class III (high potential concern, exposure threshold 1.5 µg/kg body weight per day), the corresponding linear oligomers are expected to be of a lower probable toxicological concern (Cramer class I, 30 µg/kg body weight per day). A cleavage of cyclic polyester oligomers under human intestinal conditions, which was assessed to be likely by the provided in vitro experiments, could consequently affect the risk assessment on polyester oligomers.
- 29 May 2019
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 37 (4) , 681-703
Release and migration of cyclic polyester oligomers from bisphenol A non-intent polyester–phenol-coatings into food simulants and infant food – a comprehensive study
Coatings for cans or closures are essential to protect the metal from corrosion and the food from migration of hazardous metal ions. Since coatings are no inert materials, they can release substances of potential health concern into food. In the present study, a comprehensive analysis is presented for a complex two-layered polyester–phenol-coating commercially used for metal closures of complementary infant food in sterilised glass jars. Focussed on the identity and migration of cyclic polyester oligomers as a kind of predictable non-intentionally added substances, polyester resin raw materials (n = 3) as well as individual coating layers (n = 3) were characterised by several analytical strategies (size exclusion chromatography, high-performance liquid chromatography mass spectrometry, diode array detection, charged aerosol detection, monomer determination after alkaline hydrolysis, overall migrate). The main polyester monomers were terephthalic acid, isophthalic acid, trimellitic acid, ethylene glycol, diethylene glycol, neopentylglycol, 2-methyl-1,3-propanediol, 1,4-butanediol and tricyclodecanedimethanol. The coatings were extracted with solvents acetonitrile and ethanol (24 h, 60°C), food simulants 50% ethanol, 20% ethanol and water (1 h, 121°C) as well as homemade and commercial baby food (1 h, 121°C). The released total polyester content determined by alkaline hydrolysis ranged from 288 µg/dm2 (water, 1 h, 121°C) to 6154 µg/dm2 (acetonitrile, 24 h, 60°C). However, individual cyclic oligomers, mainly dimers, were released from the coating to up to about 140 µg/dm2. Migration into infant food was best represented by the food simulants water (up to 1% fat) and 20% ethanol (up to 5% fat). Cyclic polyester oligomers are classified as Cramer III substances by the threshold of toxicological concern concept associated to an exposure threshold of 1.5 µg/kg body weight per day. Exposure to cyclic polyester oligomers might be a potential concern for highly exposed infants.
- 29 May 2019
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 37 (4) , 681-703
Release and migration of cyclic polyester oligomers from bisphenol A non-intent polyester–phenol-coatings into food simulants and infant food – a comprehensive study
Coatings for cans or closures are essential to protect the metal from corrosion and the food from migration of hazardous metal ions. Since coatings are no inert materials, they can release substances of potential health concern into food. In the present study, a comprehensive analysis is presented for a complex two-layered polyester–phenol-coating commercially used for metal closures of complementary infant food in sterilised glass jars. Focussed on the identity and migration of cyclic polyester oligomers as a kind of predictable non-intentionally added substances, polyester resin raw materials (n = 3) as well as individual coating layers (n = 3) were characterised by several analytical strategies (size exclusion chromatography, high-performance liquid chromatography mass spectrometry, diode array detection, charged aerosol detection, monomer determination after alkaline hydrolysis, overall migrate). The main polyester monomers were terephthalic acid, isophthalic acid, trimellitic acid, ethylene glycol, diethylene glycol, neopentylglycol, 2-methyl-1,3-propanediol, 1,4-butanediol and tricyclodecanedimethanol. The coatings were extracted with solvents acetonitrile and ethanol (24 h, 60°C), food simulants 50% ethanol, 20% ethanol and water (1 h, 121°C) as well as homemade and commercial baby food (1 h, 121°C). The released total polyester content determined by alkaline hydrolysis ranged from 288 µg/dm2 (water, 1 h, 121°C) to 6154 µg/dm2 (acetonitrile, 24 h, 60°C). However, individual cyclic oligomers, mainly dimers, were released from the coating to up to about 140 µg/dm2. Migration into infant food was best represented by the food simulants water (up to 1% fat) and 20% ethanol (up to 5% fat). Cyclic polyester oligomers are classified as Cramer III substances by the threshold of toxicological concern concept associated to an exposure threshold of 1.5 µg/kg body weight per day. Exposure to cyclic polyester oligomers might be a potential concern for highly exposed infants.
- 1 October 2018
- Published by Elsevier in Journal of Chromatography A
- Vol. 1572, 187-202
Universal response quantification approach using a Corona Charged Aerosol Detector (CAD) – Application on linear and cyclic oligomers extractable from polycondensate plastics polyesters, polyamides and polyarylsulfones
- 1 October 2018
- Published by Elsevier in Journal of Chromatography A
- Vol. 1572, 187-202
Universal response quantification approach using a Corona Charged Aerosol Detector (CAD) – Application on linear and cyclic oligomers extractable from polycondensate plastics polyesters, polyamides and polyarylsulfones
- 2 April 2018
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 35 (7) , 1421-1437
Polyphenylsulfone (PPSU) for baby bottles: a comprehensive assessment on polymer-related non-intentionally added substances (NIAS)
Polyphenylsulfone (PPSU) is a new material for the production of baby bottles. PPSU is a polyether plastic formally composed of bisphenol S (BPS) and 4,4ʹ-dihydroxybiphenyl (DHBP), which both have slight endocrine activities in in vitro tests. So far, little is known about the presence and the release of potentially hazardous substances from PPSU baby bottles. In this study, we present a three-step approach for the analysis of PPSU starting with polymer characterisation in terms of chemical structure, total oligomer content and hydrolytic stability. Second is the determination of extractables focussing on monomers, monomer derivatives, linear and cyclic oligomers below 1000 Da and residual solvent. Third is a risk assessment on migration-related substances in accordance to European Union plastics regulation no. 10/2011 based on triplicate consecutive migration experiments using official milk simulant 50% ethanol. We analysed five types of PPSU baby bottles from different brands as well as corresponding raw materials from different manufacturers by various analytical techniques (high-performance liquid chromatography (HPLC)-diode array detector /fluorescence detector/Corona/electrospray ionisation-MS, HPLC-size exclusion chromatography, gas chromatography-mass spectrometry (GC-MS), 1H-NMR). We found significant variations of PPSU materials from different producers with regard to polymer and oligomer chain end groups (methoxylation, chlorination), while total oligomer content below 1000 Da was similar (mean about 0.48%). BPS was not detected above 0.3 mg/kg polymer in any PPSU sample. Residual DHBP content ranged between 1.7 and 15.5 mg/kg polymer. The most common oligomer in all PPSU samples was the cyclic tetramer (about 1200 mg/kg polymer), which is the only cyclic compound below 1000 Da. Residual solvent, sulfolane, was determined to a maximum of 1300 mg/kg polymer. In migration tests, we detected exceedances of neither specific migration limits for listed substances nor of thresholds of toxicological concern for non-listed substances (monomer derivatives, oligomers). Based on our analytical results, no concerns exist regarding migration of polymer-related substances from PPSU baby bottles.
- 2 April 2018
- Published by Taylor & Francis in Food Additives & Contaminants: Part A
- Vol. 35 (7) , 1421-1437
Polyphenylsulfone (PPSU) for baby bottles: a comprehensive assessment on polymer-related non-intentionally added substances (NIAS)
Polyphenylsulfone (PPSU) is a new material for the production of baby bottles. PPSU is a polyether plastic formally composed of bisphenol S (BPS) and 4,4ʹ-dihydroxybiphenyl (DHBP), which both have slight endocrine activities in in vitro tests. So far, little is known about the presence and the release of potentially hazardous substances from PPSU baby bottles. In this study, we present a three-step approach for the analysis of PPSU starting with polymer characterisation in terms of chemical structure, total oligomer content and hydrolytic stability. Second is the determination of extractables focussing on monomers, monomer derivatives, linear and cyclic oligomers below 1000 Da and residual solvent. Third is a risk assessment on migration-related substances in accordance to European Union plastics regulation no. 10/2011 based on triplicate consecutive migration experiments using official milk simulant 50% ethanol. We analysed five types of PPSU baby bottles from different brands as well as corresponding raw materials from different manufacturers by various analytical techniques (high-performance liquid chromatography (HPLC)-diode array detector /fluorescence detector/Corona/electrospray ionisation-MS, HPLC-size exclusion chromatography, gas chromatography-mass spectrometry (GC-MS), 1H-NMR). We found significant variations of PPSU materials from different producers with regard to polymer and oligomer chain end groups (methoxylation, chlorination), while total oligomer content below 1000 Da was similar (mean about 0.48%). BPS was not detected above 0.3 mg/kg polymer in any PPSU sample. Residual DHBP content ranged between 1.7 and 15.5 mg/kg polymer. The most common oligomer in all PPSU samples was the cyclic tetramer (about 1200 mg/kg polymer), which is the only cyclic compound below 1000 Da. Residual solvent, sulfolane, was determined to a maximum of 1300 mg/kg polymer. In migration tests, we detected exceedances of neither specific migration limits for listed substances nor of thresholds of toxicological concern for non-listed substances (monomer derivatives, oligomers). Based on our analytical results, no concerns exist regarding migration of polymer-related substances from PPSU baby bottles.