EØEmil Visby Østergaard

Emil Visby Østergaard

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emil Visby Østergaard has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Distinct Foliar Uptake Pathways for Phosphorus and Nano‐Hydroxyapatite in Potato Revealed By Synchrotron μCT and ³³P Imaging

    by Max Frank, Stine Le Tougaard, Augusta Szameitat, Emil Visby Kristensen, Daniel P. Persson, Rajmund Mokso, Søren Husted

    Potato ( Solanum tuberosum L.) has a high phosphorus (P) requirement, yet its shallow root system and the strong P‐fixing capacity of many soils limit the effectiveness of soil fertilisation. Foliar application of nano‐hydroxyapatite particles (nHAPs) has emerged as a promising alternative P fertilisation practice. In this study, we compared foliar uptake mechanisms of nHAPs and orthophosphate ions (Pi) in potato using advanced bioimaging techniques and quantified their P uptake efficiency (PUE) with ³³P radioisotopes in controlled‐environment and field experiments. Imaging revealed distinct uptake pathways: Pi penetrated directly through the cuticle, whereas nHAPs primarily entered through hydraulically activated stomata. Foliar application of nHAPs achieved a PUE of approximately 50% after 7 days ‐ far exceeding global averages for soil‐applied P fertilisers ‐ while avoiding the leaf scorching commonly associated with Pi sprays. Pi uptake was insensitive to leaf surface polarity but increased when the surface tension of the foliar spray was low. In contrast, nHAP uptake was greater on adaxial leaf surfaces and favoured by higher surface tension. These findings demonstrate that aligning foliar nano particle formulations with their respective uptake pathways, spray properties, and leaf traits can substantially enhance nano‐particle uptake efficacy. This work provides new mechanistic insight to support more efficient and sustainable P management practices in potato production and broader agricultural systems.

  • 3D X-ray Microscopy Lights up Nanoparticles in Plants

    by Emil V. Kristensen, Francesca Siracusa, Andrea Pinna, Idil Ertem, Augusta Szameitat, Julie Villanova, Xiaoyu Gao, Adrian Alexander Schiefler, Dominique J. Tobler, Subhasis Ghoshal, et al.

    The discovery of new plant fertilization strategies heavily relies on our capabilities to probe physiological processes in living plants with subcellular precision. State-of-the-art microscopy techniques are in general limited to surface investigation or require elaborate tissue preparation and often destruction. X-ray microscopy has the potential to resolve some of these limitations by generating micro- to nanometer-scale 3D images deep in the tissue. We introduce experimental designs and quantitative analysis methodologies, pioneering in vivo 3D microscopy of plant tissue down to 50 nm isotropic voxel size. We show direct in vivo visualization of foliar-applied untagged clustered nanoparticulate fertilizers deep under the leaf surface, not accessible by other microscopy methods. The clustering of nanoparticles occurs naturally for MSN particles and is induced by CaCl2 for nPAA-MnO2 particles. Ultimately, our approach provides the means for direct observation of nanoparticle transport and dissolution in living plant tissue, a step critical for developing sustainable plant fertilization approaches.


  • Open Access

    X‐ray micro‐CT imaging to study foliar water uptake mechanisms in plants with contrasting leaf topography

    by Max Frank, Emil Visby Kristensen, Augusta Szameitat, Francesca Siracusa, Idil Ertem, Rikke Dahl, Katie G. Dempsey, Rajmund Mokso, Søren Husted

    Summary: Formation of an aqueous continuum from the leaf surface to the sub‐stomatal cavity is a key process, affecting the foliar entry of solutes, particles, and pathogens. However, the factors controlling the transition from a water droplet to the formation of a continuous water film remain poorly understood. To address current limitations in state‐of‐the‐art bioimaging methods, we developed an X‐ray micro‐CT technique that enables nondestructive, time‐resolved visualization of water films on live barley (Hordeum vulgare) and potato (Solanum tuberosum) plants under controlled environmental conditions. We compare droplet behavior, leaf wetting, and the formation of foliar water films on two important crop plants, potato and barley, which differ markedly in their leaf surface characteristics, in terms of hydrophobicity of the cuticle, as well as stomatal topography and trichome morphology and density. We show that continuous water films, from the cuticle into stomata, may form within a few hours, and that a given set of environmental conditions may trigger hydraulic activation of stomata in one crop but not in another, depending largely on the physicochemical properties of the liquid and leaf surface morphological features.


  • Open Access

    Effective Thermal Properties of a HTS Transition Edge Bolometer for High‐Flux Neutron Detection

    by Mette Bybjerg Brock, Emil Visby Østergaard, Anders C. Wulff, Asger Bech Abrahamsen, Luise Theil Kuhn

    Many applications require monitoring of increasingly high neutron flux levels. Pre‐neutron characterization is performed of a superconducting transition edge bolometric device, sensitive to neutrons by an enriched boron carbide (10B4C) layer. Heat from the absorption of neutrons is simulated using an attenuated laser, while the detector is cooled to the critical temperature, Tc. Frequency dependent (4–25 Hz) and constant input power measurements are performed on a 10B4C‐coated and a non‐coated pixel. Results are used to fit a two lumped element thermal model. The effective specific heat is highly dependent on the input pulse duration due to the interconnected stack structure. For modulated pulses, the active volume in the thermal circuit is the full depth of the substrate in the area under the pixel. For constant power input, a large portion of the substrate is heated and the interface conductivities to the cold finger are found to be important. The detectivity is D* = 3.5 × 108 , and is only slightly lower than similar detectors. Understanding the dynamics of the detector better and using neutron excitation, it is expected that optimizations can lead to an equally good detector for cold to thermal neutrons at flux levels >106 n cm−2s−1.


  • Smoothing Oscillatory Peristaltic Pump Flow with Bioinspired Passive Components

    by Matthew D. Biviano, Magnus V. Paludan, Anneline H. Christensen, Emil V. Østergaard, Kaare H. Jensen

    Pulsating flows are common in many industrial, scientific, and natural fluidic systems. However, because the oscillatory flow component disturbs, e.g., optical measurements, deposition, or industrial processes, it is rarely desired. Moreover, in physiological conditions, pulsation control is desired. We explore the effect of using a plant-inspired nonlinear resistor to smooth the output of a peristaltic pump. Incorporating a 3D printed millifluidic biomimetic device reduces the oscillation amplitudes by 3 orders of magnitude, from 100% to 0.1% of the output flow rate. This represents a tenfold improvement relative to a purely linear resistive-capacitive approach. The observed flow kinetics compare well to a predictive model of peristaltic transport, allowing the further development of optimized fluid-handling systems driven by pulsatile flow. Applications to particle tracking and jetting are considered.


  • Fluid physics of telescoping cardboard boxes

    by Jolet de Ruiter, Emil Visby Østergaard, Sean Marker, Kaare H. Jensen

    The economics, environmental impact, and mechanical properties of paper-based storage containers have been widely studied. However, knowledge of the physical processes relevant to the end-user experience is unavailable. This paper outlines the main effects associated with the closing and opening of telescoping boxes, which are used, for instance, to store and transport board games, footwear, mobile phones, and tablet computers. The sliding motion of the lid is controlled by the flow in a thin film of air in the gap separating the lid and the base of the box. Based on a broad comparison between theory and experiments on real and synthetic boxes, we find that the process is primarily controlled by the shape of the gap between the base and the lid. We derive a master equation for the lid motion and identify the origin of three distinct experimental regimes. Finally, an optimal design for a rapidly closing box is identified.


  • Fluid-structure interactions enable passive flow control in real and biomimetic plants

    by Keunhwan Park, Aude Tixier, Magnus Paludan, Emil Østergaard, Maciej Zwieniecki, Kaare H. Jensen

    Controlling fluid flow is a fundamental problem with applications from biomedicine to environmental engineering. Contemporary solutions combine electromechanical sensors, valves, and pumps; however, these are expensive and difficult to maintain. We report an autonomous flow control principle inspired by vascular transport in plants. Combining experiments on real and biomimetic tissues, we show that networks of cells linked by nonlinear valves permit the physical programming of a nearly arbitrary pressure drop versus flow rate relation. The nonlinearity is a consequence of fluid-structure interactions that allow a flexible element to selectively block the valve aperture. We report four applications: parallel connections that function as (i) a nonlinear flow controller, (ii) a constant flow controller, (iii) a reverse Ohm flow controller, and a serial connection that acts as (iv) a fluidic on-off switch.


  • Bulk heterogeneity in barium titanate above the Curie temperature

    by Jeppe Ormstrup, Emil V. Østergaard, Magnus S. Christensen, Can Yildirim, Philip K. Cook, Mustafacan Kutsal, Thomas Olsen, Hugh Simons

    We use dark-field x-ray microscopy to reveal evidence of subtle structural heterogeneity in BaTiO3 single crystals at temperatures of 150 °C—well above the Curie temperature of 125 °C. The heterogeneity exhibits domain-like ordering on the scale of several micrometers, pronounced curvature, and a preference for ⟨110⟩ lattice directions. Complementary high-resolution x-ray reciprocal space measurements suggest that the features originate from point defects (most likely oxygen vacancies) that coalesce along pre-existing domain walls during aging. A simple thermodynamic model suggests that the weak elastic strains associated with the heterogeneity are likely to locally raise the Curie temperature in their vicinity, creating nucleation sites for the ferroelectric phase upon cooling through the ferroelectric phase transition.


  • Thermal and electric field stability of square-net domain patterns in barium titanate

    by Emil V. Østergaard, Jeppe Ormstrup, Hugh Simons

    We use polarized light microscopy in situ with an externally applied electric field to induce square-net birefringence patterns in top-seeded single crystals of barium titanate above the Curie temperature (TC). The patterns occur under a wide range of electric field magnitudes larger than ∼0.2 kV/mm and at temperatures up to 6∘C above TC. We mapped this behavior on a pseudophase diagram showing the region in electric field and temperature space where this domain configuration is stable. We observed the electric field induced transformation into the periodically ordered structure from both the cubic structure above TC and the tetragonal structure below TC. Synchrotron x-ray reciprocal space maps indicate the presence of ferroelastic domains perpendicular to the electric field direction at a range of electric field magnitudes similar to those required to induce the periodic domain ordering we observe using polarized light microscopy. Combined with a simple model of the optical retardation, we show that the periodic domain ordering responsible for the square-net birefringence occurs only at the surfaces of the crystals and that these domain structures are unexpectedly invariant with respect to the electric field that induces them.

  • Imaging microstructural dynamics and strain fields in electro-active materials in situ with dark field x-ray microscopy

    by Jeppe Ormstrup, Emil V. Østergaard, Carsten Detlefs, Ragnvald H. Mathiesen, Can Yildirim, Mustafacan Kutsal, Philip K. Cook, Yves Watier, Carlos Cosculluela, Hugh Simons

    The electric-field-induced and temperature induced dynamics of domains, defects, and phases play an important role in determining the macroscopic functional response of ferroelectric and piezoelectric materials. However, distinguishing and quantifying these phenomena remains a persistent challenge that inhibits our understanding of the fundamental structure–property relationships. In situ dark field x-ray microscopy is a new experimental technique for the real space mapping of lattice strain and orientation in bulk materials. In this paper, we describe an apparatus and methodology for conducting in situ studies of thermally and electrically induced structural dynamics and demonstrate their use on ferroelectric BaTiO3 single crystals. The stable temperature and electric field apparatus enables simultaneous control of electric fields up to ≈2 kV/mm at temperatures up to 200 °C with a stability of ΔT = ±0.01 K and a ramp rate of up to 0.5 K/min. This capability facilitates studies of critical phenomena, such as phase transitions, which we observe via the microstructural change occurring during the electric-field-induced cubic to tetragonal phase transition in BaTiO3 at its Curie temperature. With such systematic control, we show how the growth of the polar phase front and its associated ferroelastic domains fall along unexpected directions and, after several cycles of electric field application, result in a non-reversible lattice strain at the electrode–crystal interface. These capabilities pave the way for new insights into the temperature and electric field dependent electromechanical transitions and the critical influence of subtle defects and interfaces.