Hanna Hinrika Cramer
Hanna Hinrika Cramer has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Christophe Werlé
Université de Lorraine, CNRS, L2CM, F-54000 Nancy, France
8 shared publications - Basujit Chatterjee
Max Planck Institute for Chemical Energy Conversion Stiftstr. 34–36 45470 Mülheim an der Ruhr Germany
6 shared publications - Thomas Weyhermüller
Max Planck Institute for Chemical Energy Conversion, Stiftstrasse 34-36, 45470 Mülheim an der Ruhr, Germany
6 shared publications - Walter Leitner
Institut für Technische und Makromolekulare Chemie, RWTH Aachen University, Worringerweg 2, 52074 Aachen, Germany
6 shared publications - Paul James Chirik
Princeton University
5 shared publications - Carsten Hindemith
Max Planck Institute for Chemical Energy Conversion, Stiftstr. 34–36, 45470, Mülheim an der Ruhr, Germany
2 shared publications
Latest Publications
- 17 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14163-14173
The Role of Boron Reagents in Determining the Site-Selectivity of Pyridine(dicarbene) Cobalt-Catalyzed C–H Borylation of Fluorinated Arenes
The origin of the meta- and ortho-to-fluorine site-selectivity in the C(sp2)-H borylation of fluorinated arenes with B2Pin2 and HBPin promoted by pyridine(dicarbene)cobalt catalysts has been investigated. In situ generation of the cobalt(I)-boryl complex and treatment with three representative fluoroarenes established meta-selective C(sp2)-H oxidative addition to form predominantly the meta isomers of the corresponding cobalt(I)-aryl complexes. Attempts to observe or isolate the four-coordinate cobalt(I)-boryl complex yielded the cobalt-hydride dimer, [(iPrACNC)CoH]2, borohydride (iPrACNC)CoH2BPin, or diboryl hydride, (iPrACNC)CoH(BPin)2 depending on the amounts of B2Pin2 and HBPin present. The phosphite derivatives (iPrACNC)CoH(P(OiPr)3) and (iPrACNC)CoBPin(P(OiPr)3) were prepared and crystallographically characterized. In the catalytic borylation of 1,3-difluorobenzene, ortho-to-fluorine cobalt(I)-aryl and borohydride complexes were identified as resting states despite meta-to-fluorine borylation being the major product of catalysis. Deuterium kinetic isotope effects support irreversible but not turnover-limiting C(sp2)-H oxidative addition. Stoichiometric borylation of isolated cobalt(I)-aryl intermediates with B2Pin2 established that the meta-cobalt(I)-aryl was more reactive than the ortho-isomer and accounts for the observed cobalt(I)-aryl resting states. All cobalt(I)-aryl compounds reacted more quickly with HBPin. While ortho-cobalt(I)-aryl compounds yielded arylboronate products with high site-selectivity, meta-cobalt-aryl counterparts yielded a mixture of arylboronate isomers and free arene. Deuterium labeling experiments with DBPin confirmed that HBPin mediates reversible C(sp2)-H oxidative addition. Thus, the overall site-selectivity arises from two reinforcing effects: (i) kinetically meta-selective oxidative addition and (ii) faster reaction of the meta-cobalt-aryl isomer with B2Pin2. As B2Pin2 is converted to HBPin, C(sp2)-H reductive elimination competes against borylation of the meta-cobalt-aryl isomer, resulting in increased ortho-selective borylation.
- 17 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14163-14173
The Role of Boron Reagents in Determining the Site-Selectivity of Pyridine(dicarbene) Cobalt-Catalyzed C–H Borylation of Fluorinated Arenes
The origin of the meta- and ortho-to-fluorine site-selectivity in the C(sp2)-H borylation of fluorinated arenes with B2Pin2 and HBPin promoted by pyridine(dicarbene)cobalt catalysts has been investigated. In situ generation of the cobalt(I)-boryl complex and treatment with three representative fluoroarenes established meta-selective C(sp2)-H oxidative addition to form predominantly the meta isomers of the corresponding cobalt(I)-aryl complexes. Attempts to observe or isolate the four-coordinate cobalt(I)-boryl complex yielded the cobalt-hydride dimer, [(iPrACNC)CoH]2, borohydride (iPrACNC)CoH2BPin, or diboryl hydride, (iPrACNC)CoH(BPin)2 depending on the amounts of B2Pin2 and HBPin present. The phosphite derivatives (iPrACNC)CoH(P(OiPr)3) and (iPrACNC)CoBPin(P(OiPr)3) were prepared and crystallographically characterized. In the catalytic borylation of 1,3-difluorobenzene, ortho-to-fluorine cobalt(I)-aryl and borohydride complexes were identified as resting states despite meta-to-fluorine borylation being the major product of catalysis. Deuterium kinetic isotope effects support irreversible but not turnover-limiting C(sp2)-H oxidative addition. Stoichiometric borylation of isolated cobalt(I)-aryl intermediates with B2Pin2 established that the meta-cobalt(I)-aryl was more reactive than the ortho-isomer and accounts for the observed cobalt(I)-aryl resting states. All cobalt(I)-aryl compounds reacted more quickly with HBPin. While ortho-cobalt(I)-aryl compounds yielded arylboronate products with high site-selectivity, meta-cobalt-aryl counterparts yielded a mixture of arylboronate isomers and free arene. Deuterium labeling experiments with DBPin confirmed that HBPin mediates reversible C(sp2)-H oxidative addition. Thus, the overall site-selectivity arises from two reinforcing effects: (i) kinetically meta-selective oxidative addition and (ii) faster reaction of the meta-cobalt-aryl isomer with B2Pin2. As B2Pin2 is converted to HBPin, C(sp2)-H reductive elimination competes against borylation of the meta-cobalt-aryl isomer, resulting in increased ortho-selective borylation.
- 11 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (16) , 13688-13698
Pyridine(diimine) Chromium η,1η3-Metallacycles as Precatalysts for Alkene-Diene [2 + 2] Cycloaddition
The synthesis, characterization, and catalytic cycloaddition reactivity of aryl-substituted pyridine(diimine) (PDI) chromium ether complexes and alkene-diene derived metallacycles are described. The reduction of either (PDI)CrCl2 or (PDI)CrCl3 with sodium and catalytic amounts of naphthalene furnished the corresponding chromium THF or diethyl ether complexes. Exposure of the reduced chromium compounds to a mixture of butadiene and ethylene induced rapid oxidative cyclization and yielded isolable, thermally stable chromium η,1η3 trans-metallacycles. In the presence of pure butadiene, oxidative cyclization was also observed, and a η,1η3 diene-diene chromacycloheptane with vinyl substitution was isolated and crystallographically characterized. Reductive C(sp3)-C(sp3) elimination of the resulting vinylcyclobutane products was promoted by either one-electron oxidation or irradiation with visible light in the presence of diene or coordinating solvents such as THF. Under thermal catalytic conditions, the chromacycles converted butadiene and ethylene to a mixture of vinylcyclobutane arising from [2 + 2] cycloaddition and cis-1,4-hexadiene resulting from competitive hydrovinylation. Visible light irradiation at ambient temperature enabled selective catalytic [2 + 2] cycloaddition. Isotopic labeling studies with 13C-labeled ethylene established that the alkene-diene chromacycle is thermodynamically preferred over the diene-diene alternative and that both oxidative cyclization and reductive coupling steps are reversible. Visible light accelerated the reductive coupling step, while subsequent product displacement from the metal center occurs in the presence of excess diene.
- 11 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (16) , 13688-13698
Pyridine(diimine) Chromium η,1η3-Metallacycles as Precatalysts for Alkene-Diene [2 + 2] Cycloaddition
The synthesis, characterization, and catalytic cycloaddition reactivity of aryl-substituted pyridine(diimine) (PDI) chromium ether complexes and alkene-diene derived metallacycles are described. The reduction of either (PDI)CrCl2 or (PDI)CrCl3 with sodium and catalytic amounts of naphthalene furnished the corresponding chromium THF or diethyl ether complexes. Exposure of the reduced chromium compounds to a mixture of butadiene and ethylene induced rapid oxidative cyclization and yielded isolable, thermally stable chromium η,1η3 trans-metallacycles. In the presence of pure butadiene, oxidative cyclization was also observed, and a η,1η3 diene-diene chromacycloheptane with vinyl substitution was isolated and crystallographically characterized. Reductive C(sp3)-C(sp3) elimination of the resulting vinylcyclobutane products was promoted by either one-electron oxidation or irradiation with visible light in the presence of diene or coordinating solvents such as THF. Under thermal catalytic conditions, the chromacycles converted butadiene and ethylene to a mixture of vinylcyclobutane arising from [2 + 2] cycloaddition and cis-1,4-hexadiene resulting from competitive hydrovinylation. Visible light irradiation at ambient temperature enabled selective catalytic [2 + 2] cycloaddition. Isotopic labeling studies with 13C-labeled ethylene established that the alkene-diene chromacycle is thermodynamically preferred over the diene-diene alternative and that both oxidative cyclization and reductive coupling steps are reversible. Visible light accelerated the reductive coupling step, while subsequent product displacement from the metal center occurs in the presence of excess diene.
- 26 March 2025
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 44 (7) , 807-815
Site-Selectivity of C(sp2)–H Oxidative Addition of Fluorinated Arenes with Pyridine(dicarbene) Cobalt(I) Complexes and Aryl Isomerization
The rate, site-selectivity, and product isomerization of the C(sp2)–H oxidative addition of arenes with pyridine(dicarbene)cobalt methyl and phenyl complexes have been investigated with four representative arenes of varying electronic and steric properties. The rates of C(sp2)–H activation to yield cobalt-aryl products and subsequent aryl isomerization were influenced by the electronic properties of the arene; the relatively electron-poor arene 3-fluorobenzotrifluoride underwent C(sp2)–H activation and isomerization of the cobalt-aryl more than 70 times faster than the more electron-rich substrate, 3-fluoro-N,N,α-trimethylbenzeneacetamide. In all cases, meta-to-fluorine C(sp2)–H oxidative addition was the major product at low conversion, which subsequently isomerized to the ortho-isomer over time. Deuterium labeling experiments and measurement of methane isotopologues establish that the major cobalt-aryl product at early conversion arise from kinetically preferred, meta-selective oxidative addition. Density functional theory calculations support pathways involving cobalt(I)-(III) redox cycles with oxidative addition to cobalt(I) occurring with a relatively high barrier followed by faster reductive elimination. Despite the strong σ-donating properties of the pyridine(dicarbene) pincer ligand, the π-accepting character of the carbene donors lowers the barrier for reductive elimination and hence, cobalt(III) intermediates have not been observed.
- 26 March 2025
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 44 (7) , 807-815
Site-Selectivity of C(sp2)–H Oxidative Addition of Fluorinated Arenes with Pyridine(dicarbene) Cobalt(I) Complexes and Aryl Isomerization
The rate, site-selectivity, and product isomerization of the C(sp2)–H oxidative addition of arenes with pyridine(dicarbene)cobalt methyl and phenyl complexes have been investigated with four representative arenes of varying electronic and steric properties. The rates of C(sp2)–H activation to yield cobalt-aryl products and subsequent aryl isomerization were influenced by the electronic properties of the arene; the relatively electron-poor arene 3-fluorobenzotrifluoride underwent C(sp2)–H activation and isomerization of the cobalt-aryl more than 70 times faster than the more electron-rich substrate, 3-fluoro-N,N,α-trimethylbenzeneacetamide. In all cases, meta-to-fluorine C(sp2)–H oxidative addition was the major product at low conversion, which subsequently isomerized to the ortho-isomer over time. Deuterium labeling experiments and measurement of methane isotopologues establish that the major cobalt-aryl product at early conversion arise from kinetically preferred, meta-selective oxidative addition. Density functional theory calculations support pathways involving cobalt(I)-(III) redox cycles with oxidative addition to cobalt(I) occurring with a relatively high barrier followed by faster reductive elimination. Despite the strong σ-donating properties of the pyridine(dicarbene) pincer ligand, the π-accepting character of the carbene donors lowers the barrier for reductive elimination and hence, cobalt(III) intermediates have not been observed.
- 27 March 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (14) , 9947-9956
Ligand Field Sensitive Spin Acceleration in the Iron-Catalyzed [2 + 2] Cycloaddition of Unactivated Alkenes and Dienes
Redox-active pyridine(diimine) (PDI) iron catalysts promote the reversible [2 + 2] cycloaddition of alkenes and dienes to cyclobutane derivatives that have applications ranging from fuels to chemically recyclable polymers. Metallacycles were identified as key intermediates, and spin crossover from the singlet to the triplet surface was calculated to facilitate the reductive coupling step responsible for the formation of the four-membered ring. In this work, a series of sterically and electronically differentiated PDI ligands was studied for the [2 + 2] cycloaddition of ethylene and butadiene to vinylcyclobutane. Kinetic studies revealed that the fastest and slowest turnover were observed with equally electron-deficient supporting ligands that either feature phenyl-substituted imine carbon atoms (MeBPDI) or a pyrazine core (MePZDI). While the oxidative cyclization was comparatively slow for both catalysts, the rate of reductive coupling─determined by stoichiometric 13C2H4 labeling studies─correlated with the turnover frequencies. Two-state density functional theory studies and the distinct electronic structures of related (iPrBPDI) and (iPrPZDI) iron methyl complexes revealed significantly different ligand field strengths due to either diminished ligand σ-donation (MeBPDI) or promoted metal π-backbonding (MePZDI). Spin acceleration, leading to fast reductive coupling and catalytic turnover, was promoted in the case of the weaker ligand field and depends on both the nature and position of the electron-withdrawing group. This study provides strong evidence for the role of two-state reactivity in C(sp3)-C(sp3) bond formation and insights on how ligand design either promotes or inhibits spin acceleration in earth-abundant metal catalysis.
- 27 March 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (14) , 9947-9956
Ligand Field Sensitive Spin Acceleration in the Iron-Catalyzed [2 + 2] Cycloaddition of Unactivated Alkenes and Dienes
Redox-active pyridine(diimine) (PDI) iron catalysts promote the reversible [2 + 2] cycloaddition of alkenes and dienes to cyclobutane derivatives that have applications ranging from fuels to chemically recyclable polymers. Metallacycles were identified as key intermediates, and spin crossover from the singlet to the triplet surface was calculated to facilitate the reductive coupling step responsible for the formation of the four-membered ring. In this work, a series of sterically and electronically differentiated PDI ligands was studied for the [2 + 2] cycloaddition of ethylene and butadiene to vinylcyclobutane. Kinetic studies revealed that the fastest and slowest turnover were observed with equally electron-deficient supporting ligands that either feature phenyl-substituted imine carbon atoms (MeBPDI) or a pyrazine core (MePZDI). While the oxidative cyclization was comparatively slow for both catalysts, the rate of reductive coupling─determined by stoichiometric 13C2H4 labeling studies─correlated with the turnover frequencies. Two-state density functional theory studies and the distinct electronic structures of related (iPrBPDI) and (iPrPZDI) iron methyl complexes revealed significantly different ligand field strengths due to either diminished ligand σ-donation (MeBPDI) or promoted metal π-backbonding (MePZDI). Spin acceleration, leading to fast reductive coupling and catalytic turnover, was promoted in the case of the weaker ligand field and depends on both the nature and position of the electron-withdrawing group. This study provides strong evidence for the role of two-state reactivity in C(sp3)-C(sp3) bond formation and insights on how ligand design either promotes or inhibits spin acceleration in earth-abundant metal catalysis.
- Open Access
- 12 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Ligand Field Sensitive Spin Acceleration in the Iron-Catalyzed [2+2] Cycloaddition of Unactivated Alkenes and Dienes
Redox-active pyridine(diimine) (PDI) iron catalysts promote the reversible [2+2] cycloaddition of alkenes and dienes to cyclobutane derivatives that have applications ranging from fuels to chemically recyclable polymers. Metallacycles were identified as key intermediates, and spin crossover from the singlet to the triplet surface has been calculated to facilitate the reductive coupling step responsible for the formation of the four-membered ring. In this work, a series of sterically and electronically differentiated PDI ligands was studied for the [2+2] cycloaddition of ethylene and butadiene to vinylcyclobutane. Kinetic studies revealed that the fastest and the slowest turnover were observed with equally electron-deficient supporting ligands that either feature phenyl-substituted imine carbon atoms (MeBPDI) or a pyrazine core (MePZDI). While the oxidative cyclization was comparatively slow for both catalysts, the rate of reductive coupling – determined by stoichiometric 13C2H4 labeling studies – correlated with the TOFs. Two-state DFT studies and the distinct electronic structures of related (iPrBPDI) and (iPrPZDI) iron methyl complexes revealed a significantly different ligand field strength due to either diminished ligand σ-donation (MeBPDI) or promoted metal π-backbonding (MePZDI). Spin acceleration, leading to fast reductive coupling and catalytic turnover, was promoted in the case of the weaker ligand field and depends on both the nature and the position of the electron withdrawing group. This study provides strong evidence for the role of two-state reactivity in C(sp3)–C(sp3) bond formation and insights on how ligand design either promotes or inhibits spin acceleration in earth abundant metal catalysis.
- 12 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLigand Field Sensitive Spin Acceleration in the Iron-Catalyzed [2+2] Cycloaddition of Unactivated Alkenes and Dienes
Redox-active pyridine(diimine) (PDI) iron catalysts promote the reversible [2+2] cycloaddition of alkenes and dienes to cyclobutane derivatives that have applications ranging from fuels to chemically recyclable polymers. Metallacycles were identified as key intermediates, and spin crossover from the singlet to the triplet surface has been calculated to facilitate the reductive coupling step responsible for the formation of the four-membered ring. In this work, a series of sterically and electronically differentiated PDI ligands was studied for the [2+2] cycloaddition of ethylene and butadiene to vinylcyclobutane. Kinetic studies revealed that the fastest and the slowest turnover were observed with equally electron-deficient supporting ligands that either feature phenyl-substituted imine carbon atoms (MeBPDI) or a pyrazine core (MePZDI). While the oxidative cyclization was comparatively slow for both catalysts, the rate of reductive coupling – determined by stoichiometric 13C2H4 labeling studies – correlated with the TOFs. Two-state DFT studies and the distinct electronic structures of related (iPrBPDI) and (iPrPZDI) iron methyl complexes revealed a significantly different ligand field strength due to either diminished ligand σ-donation (MeBPDI) or promoted metal π-backbonding (MePZDI). Spin acceleration, leading to fast reductive coupling and catalytic turnover, was promoted in the case of the weaker ligand field and depends on both the nature and the position of the electron withdrawing group. This study provides strong evidence for the role of two-state reactivity in C(sp3)–C(sp3) bond formation and insights on how ligand design either promotes or inhibits spin acceleration in earth abundant metal catalysis.
- Open Access
- 9 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (11) , 2799-2807
Theory-guided development of homogeneous catalysts for the reduction of CO2to formate, formaldehyde, and methanol derivatives
Computational volcano plots are used to predict selectivity in the context of (first-row) transition metal-catalyzed CO2reduction. The expected trends were tested experimentally and allowed for systematic improvement of the catalyst.
- 9 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (11) , 2799-2807
Open AccessTheory-guided development of homogeneous catalysts for the reduction of CO2to formate, formaldehyde, and methanol derivatives
Computational volcano plots are used to predict selectivity in the context of (first-row) transition metal-catalyzed CO2reduction. The expected trends were tested experimentally and allowed for systematic improvement of the catalyst.
- Open Access
- 1 August 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (36) , e202205515
An Adaptive Rhodium Catalyst to Control the Hydrogenation Network of Nitroarenes
An adaptive catalytic system that provides control over the nitroarene hydrogenation network to prepare a wide range of aniline and hydroxylamine derivatives is presented. This system takes advantage of a delicate interplay between a rhodium(III) center and a Lewis acidic borane introduced in the secondary coordination sphere of the metal. The high chemoselectivity of the catalyst in the presence of various potentially vulnerable functional groups and its readiness to be deployed at a preparative scale illustrate its practicality. Mechanistic studies and density functional theory (DFT) methods were used to shed light on the mode of functioning of the catalyst and elucidate the origin of adaptivity. The competition for interaction with boron between a solvent molecule and a substrate was found crucial for adaptivity. When operating in THF, the reduction network stops at the hydroxylamine platform, whereas the reaction can be directed to the aniline platform in toluene.
- 1 August 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (36) , e202205515
Open AccessAn Adaptive Rhodium Catalyst to Control the Hydrogenation Network of Nitroarenes
An adaptive catalytic system that provides control over the nitroarene hydrogenation network to prepare a wide range of aniline and hydroxylamine derivatives is presented. This system takes advantage of a delicate interplay between a rhodium(III) center and a Lewis acidic borane introduced in the secondary coordination sphere of the metal. The high chemoselectivity of the catalyst in the presence of various potentially vulnerable functional groups and its readiness to be deployed at a preparative scale illustrate its practicality. Mechanistic studies and density functional theory (DFT) methods were used to shed light on the mode of functioning of the catalyst and elucidate the origin of adaptivity. The competition for interaction with boron between a solvent molecule and a substrate was found crucial for adaptivity. When operating in THF, the reduction network stops at the hydroxylamine platform, whereas the reaction can be directed to the aniline platform in toluene.
- Open Access
- 1 August 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (36)
Ein adaptiver Rhodiumkatalysator zur Steuerung des Hydrierungsnetzwerks von Nitroarenen
Es wird ein adaptives katalytisches System vorgestellt, das die Kontrolle über das Nitroaren‐Hydrierungsnetzwerk zur Herstellung einer breiten Palette von Anilin‐ und Hydroxylaminderivaten ermöglicht. Dieses System profitiert von einem delikaten Zusammenspiel zwischen einem Rhodium(III)‐Zentrum und einem Lewis‐sauren Boran, das in die sekundäre Koordinationssphäre des Metalls eingeführt wird. Die hohe Chemoselektivität des Katalysators in Anwesenheit verschiedener potenziell angreifbarer funktioneller Gruppen und seine Bereitschaft, im präparativen Maßstab eingesetzt zu werden, veranschaulichen seine Praxistauglichkeit. Mechanistische Studien und Methoden der Dichtefunktionaltheorie (DFT) wurden eingesetzt, um die Funktionsweise des Katalysators zu untersuchen und den Ursprung der Adaptivität zu klären. Die Konkurrenz zwischen einem Lösungsmittelmolekül und einem Substrat um die Wechselwirkung mit Bor erwies sich als entscheidend für die Adaptivität. Bei der Reaktion in THF stoppt das Reduktionsnetzwerk an der Hydroxylamin‐Plattform, während die Reaktion in Toluol auf die Anilin‐Plattform gelenkt werden kann.
- 1 August 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (36)
Open AccessEin adaptiver Rhodiumkatalysator zur Steuerung des Hydrierungsnetzwerks von Nitroarenen
Es wird ein adaptives katalytisches System vorgestellt, das die Kontrolle über das Nitroaren‐Hydrierungsnetzwerk zur Herstellung einer breiten Palette von Anilin‐ und Hydroxylaminderivaten ermöglicht. Dieses System profitiert von einem delikaten Zusammenspiel zwischen einem Rhodium(III)‐Zentrum und einem Lewis‐sauren Boran, das in die sekundäre Koordinationssphäre des Metalls eingeführt wird. Die hohe Chemoselektivität des Katalysators in Anwesenheit verschiedener potenziell angreifbarer funktioneller Gruppen und seine Bereitschaft, im präparativen Maßstab eingesetzt zu werden, veranschaulichen seine Praxistauglichkeit. Mechanistische Studien und Methoden der Dichtefunktionaltheorie (DFT) wurden eingesetzt, um die Funktionsweise des Katalysators zu untersuchen und den Ursprung der Adaptivität zu klären. Die Konkurrenz zwischen einem Lösungsmittelmolekül und einem Substrat um die Wechselwirkung mit Bor erwies sich als entscheidend für die Adaptivität. Bei der Reaktion in THF stoppt das Reduktionsnetzwerk an der Hydroxylamin‐Plattform, während die Reaktion in Toluol auf die Anilin‐Plattform gelenkt werden kann.
- Open Access
- 4 October 2021
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 1 (11) , 2058-2069
Cobalt-Catalyzed Hydrosilylation of Carbon Dioxide to the Formic Acid, Formaldehyde, and Methanol Level─How to Control the Catalytic Network?
- 4 October 2021
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 1 (11) , 2058-2069
Open AccessCobalt-Catalyzed Hydrosilylation of Carbon Dioxide to the Formic Acid, Formaldehyde, and Methanol Level─How to Control the Catalytic Network?
- Open Access
- 13 August 2020
- Published by Wiley in Angewandte Chemie
- Vol. 132 (36) , 15382
Innentitelbild: Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO 2 Using a Molecular Cobalt(II) Triazine Complex (Angew. Chem. 36/2020)
- 13 August 2020
- Published by Wiley in Angewandte Chemie
- Vol. 132 (36) , 15382
Open AccessInnentitelbild: Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO 2 Using a Molecular Cobalt(II) Triazine Complex (Angew. Chem. 36/2020)