Rocco Peter Viggiano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rocco Peter Viggiano has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Yi Lin
NASA Langley Research Center
10 shared publicationsDonald Dornbusch
NASA Glenn Research Center
8 shared publicationsDonald A. Dornbusch
Materials Chemistry and Physics Branch, NASA Glenn Research Center
6 shared publicationsJi Su
Advanced Materials and Processing Branch, NASA Langley Research Center
6 shared publications- Yi Lin
Advanced Materials and Processing Branch, NASA Langley Research Center, Hampton, VA, United States
5 shared publications James J. Wu
4 shared publications
Latest Publications
- 28 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (31) , 8002-8014
Enhanced Ionic Conductivity in Bidisperse Solid Electrolytes
The search for safe, reliable, and compact high-capacity energy storage devices has led to an increased interest in all-solid-state battery research. Solid electrolytes provide enhanced safety and durability due to their reduced volatility and increased mechanical strength compared with organic liquid electrolytes. Using a particle dynamics electromechanics computational model, the ionic conductivity of a solid electrolyte comprised of bidisperse grain size consisting of a mixture of coarse and fine particles is examined. Simulations show increased densification and ion conductivity in the region of 10 to 30 vol % fine particle content. The conditions and mechanisms of the conductivity enhancement are analyzed, showing that high grain boundary conductivity equal to or above the bulk conductivity of the electrolyte particles and a grain size ratio between large and small particles above 3 are essential requirements for the global conductivity enhancement. Experimental tests on a Li6PS5Cl electrolyte containing 1 μm and 5 μm particles confirm these findings.
- 28 July 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (31) , 8002-8014
Enhanced Ionic Conductivity in Bidisperse Solid Electrolytes
The search for safe, reliable, and compact high-capacity energy storage devices has led to an increased interest in all-solid-state battery research. Solid electrolytes provide enhanced safety and durability due to their reduced volatility and increased mechanical strength compared with organic liquid electrolytes. Using a particle dynamics electromechanics computational model, the ionic conductivity of a solid electrolyte comprised of bidisperse grain size consisting of a mixture of coarse and fine particles is examined. Simulations show increased densification and ion conductivity in the region of 10 to 30 vol % fine particle content. The conditions and mechanisms of the conductivity enhancement are analyzed, showing that high grain boundary conductivity equal to or above the bulk conductivity of the electrolyte particles and a grain size ratio between large and small particles above 3 are essential requirements for the global conductivity enhancement. Experimental tests on a Li6PS5Cl electrolyte containing 1 μm and 5 μm particles confirm these findings.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1228
(Invited) All-Solid-State Lithium-Sulfur Batteries: From Cathode Architecture to Pouch Cell Engineering
Future electric aircraft will be enabled by technologies for safe and high specific energy batteries. Solid-state batteries with non-flammable solid electrolyte are much safer than conventional lithium ion batteries with organic solvent-based liquid electrolytes. Lithium-sulfur (Li-S) chemistry is among the highest specific energy storage platforms. Therefore, it has been suggested that the all-solid-state Li-S system is a top candidate for aviation batteries. However, the challenges start with all components of the battery cells, such as the non-conductive sulfur as the cathode active material, low conductivity and poor stability of the solid electrolyte, and the lithium–solid electrolyte interface roughened with battery reactions. In addition, even after successful development of the cell components, further challenges begin with the scale up of individual component for larger format pouch cells, such as preparing large area cathode and solid electrolyte films and non-conventional pouch fabrication processes. In this presentation, we discuss our recent progress regarding the entire all-solid-state Li-S battery system, from cell component optimization to scale-up fabrication for pouch cells. Performance metrics of these high specific energy cells will be presented and perspectives for future aviation batteries will be provided.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1228
(Invited) All-Solid-State Lithium-Sulfur Batteries: From Cathode Architecture to Pouch Cell Engineering
Future electric aircraft will be enabled by technologies for safe and high specific energy batteries. Solid-state batteries with non-flammable solid electrolyte are much safer than conventional lithium ion batteries with organic solvent-based liquid electrolytes. Lithium-sulfur (Li-S) chemistry is among the highest specific energy storage platforms. Therefore, it has been suggested that the all-solid-state Li-S system is a top candidate for aviation batteries. However, the challenges start with all components of the battery cells, such as the non-conductive sulfur as the cathode active material, low conductivity and poor stability of the solid electrolyte, and the lithium–solid electrolyte interface roughened with battery reactions. In addition, even after successful development of the cell components, further challenges begin with the scale up of individual component for larger format pouch cells, such as preparing large area cathode and solid electrolyte films and non-conventional pouch fabrication processes. In this presentation, we discuss our recent progress regarding the entire all-solid-state Li-S battery system, from cell component optimization to scale-up fabrication for pouch cells. Performance metrics of these high specific energy cells will be presented and perspectives for future aviation batteries will be provided.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1077
Solid-State Architecture Batteries for Enhanced Rechargeability and Safety (SABERS) Beyond Li-Ion: Technology to Enable Next-Generation Sustainable Electric Aviation
All-electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The primary barrier to overcome is developing an energy storage system that meets rigorous aerospace safety and performance criteria. The performance metrics for eVTOL vehicles are at least two times greater than those of electric ground vehicles. Furthermore, inherently non-flammable batteries are essential for the safe operation of commercial electric aero vehicles. The SABERS concept proposes a battery that meets the critical performance criteria by developing a solid-state architecture battery utilizing a high-capacity sulfur-selenium cathode and lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This hybrid cathode will be developed using NASA-patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement for the highly flammable liquid organic electrolytes currently in SOA lithium-ion batteries. This solid-state lithium-sulfur/selenium cell will be designed in a serial stacking configuration to enable the dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, simplifying the interfaced connections for the cell, and minimizing the cooling requirements. Lastly, the optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures up to 150 °C, providing the required energy density, discharge rates, and inherent safety to meet the strict aerospace mission performance criteria. The SABERS team employed novel materials development, computational modeling, and design-of-experiments (DOE) optimization studies in their research. This presentation will show the results of these studies and demonstrate a feasible path for solid-state cells with a specific energy greater than 400 Wh/kg to enable electric aircraft. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (8) , 1077
Solid-State Architecture Batteries for Enhanced Rechargeability and Safety (SABERS) Beyond Li-Ion: Technology to Enable Next-Generation Sustainable Electric Aviation
All-electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The primary barrier to overcome is developing an energy storage system that meets rigorous aerospace safety and performance criteria. The performance metrics for eVTOL vehicles are at least two times greater than those of electric ground vehicles. Furthermore, inherently non-flammable batteries are essential for the safe operation of commercial electric aero vehicles. The SABERS concept proposes a battery that meets the critical performance criteria by developing a solid-state architecture battery utilizing a high-capacity sulfur-selenium cathode and lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This hybrid cathode will be developed using NASA-patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement for the highly flammable liquid organic electrolytes currently in SOA lithium-ion batteries. This solid-state lithium-sulfur/selenium cell will be designed in a serial stacking configuration to enable the dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, simplifying the interfaced connections for the cell, and minimizing the cooling requirements. Lastly, the optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures up to 150 °C, providing the required energy density, discharge rates, and inherent safety to meet the strict aerospace mission performance criteria. The SABERS team employed novel materials development, computational modeling, and design-of-experiments (DOE) optimization studies in their research. This presentation will show the results of these studies and demonstrate a feasible path for solid-state cells with a specific energy greater than 400 Wh/kg to enable electric aircraft. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (2) , 315
Next Generation Solid-State Batteries for Electric Aviation
Energy storage will play a critical role in the success of future NASA missions that require batteries with higher energy density, higher power, and most critically improved safety. These performance requirements, which extend beyond those for electric automobile markets, must be satisfied to enable widespread adoption of electric aviation. One approach to improve battery safety and energy is to transition to non-volatile solid-state electrolytes (SSE) which promise many advantages over traditional flammable liquid electrolytes and may also be an enabling technology for next generation chemistries such as lithium-sulfur (Li-S). However, significant manufacturing challenges must be overcome before the adoption of such technology. This study will discuss development of solid electrolytes specifically designed to meet future NASA electric aviation targets. Separator films were processed with densified thickness between 20-30 microns using solvent processing techniques [1]. These films were produced 10-15 times thinner than comparable bulk pressed powder electrolytes and achieved thicknesses comparable to commercial polyolefin separators (25 micron) used in commercial liquid containing lithium-ion cells. Furthermore, design considerations and fabrication techniques of novel cathode composites optimized through the integration of experiment and particle dynamics modeling will be discussed [2] [3]. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, [2] Vesselin I. Yamakov, April A. Rains, Jin Ho Kang, Lopamudra Das, Rehan Rashid, Ji Su, Rocco P. Viggiano, John W. Connell, Yi Lin. Pressure Dependence of Solid Electrolyte Ionic Conductivity: A Particle Dynamics Study. ACS Applied Materials & Interfaces 2023, 15 (22) , 27243-27252. [3] Elizabeth A. Barrios, April A. Rains, Yi Lin, Ji Su, John W. Connell, Rocco P. Viggiano, Donald A. Dornbusch, James J. Wu, and Vesselin Yamakov. Li-Ion Permeability of Holey Graphene in Solid State Batteries: A Particle Dynamics Study. ACS Appl. Mater. Interfaces 2022, 14, 18, 21363–21370.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (2) , 315
Next Generation Solid-State Batteries for Electric Aviation
Energy storage will play a critical role in the success of future NASA missions that require batteries with higher energy density, higher power, and most critically improved safety. These performance requirements, which extend beyond those for electric automobile markets, must be satisfied to enable widespread adoption of electric aviation. One approach to improve battery safety and energy is to transition to non-volatile solid-state electrolytes (SSE) which promise many advantages over traditional flammable liquid electrolytes and may also be an enabling technology for next generation chemistries such as lithium-sulfur (Li-S). However, significant manufacturing challenges must be overcome before the adoption of such technology. This study will discuss development of solid electrolytes specifically designed to meet future NASA electric aviation targets. Separator films were processed with densified thickness between 20-30 microns using solvent processing techniques [1]. These films were produced 10-15 times thinner than comparable bulk pressed powder electrolytes and achieved thicknesses comparable to commercial polyolefin separators (25 micron) used in commercial liquid containing lithium-ion cells. Furthermore, design considerations and fabrication techniques of novel cathode composites optimized through the integration of experiment and particle dynamics modeling will be discussed [2] [3]. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, [2] Vesselin I. Yamakov, April A. Rains, Jin Ho Kang, Lopamudra Das, Rehan Rashid, Ji Su, Rocco P. Viggiano, John W. Connell, Yi Lin. Pressure Dependence of Solid Electrolyte Ionic Conductivity: A Particle Dynamics Study. ACS Applied Materials & Interfaces 2023, 15 (22) , 27243-27252. [3] Elizabeth A. Barrios, April A. Rains, Yi Lin, Ji Su, John W. Connell, Rocco P. Viggiano, Donald A. Dornbusch, James J. Wu, and Vesselin Yamakov. Li-Ion Permeability of Holey Graphene in Solid State Batteries: A Particle Dynamics Study. ACS Appl. Mater. Interfaces 2022, 14, 18, 21363–21370.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (67) , 4541
Fabricating Solid-State Batteries for Electric Aviation
All-solid-state lithium batteries are widely reputed as the next major step in energy storage technology on account their drastically improved safety over wet cells, as solid electrolytes lack the volatile compounds in wet electrolytes that make them combustible. This enhanced safety enables a far wider range of products and vehicles to go fully electric and aligns with future NASA missions that require high performing, reliable, and safe batteries. However, they currently face issues with implementation in both aeronautical and consumer products due to the often-poor mechanical properties of the solid electrolyte and relative difficulty to manufacture [1]. Typical solid-state electrolyte challenges were bypassed by incorporating a range of polymeric binders into a solid electrolyte suspension and cast onto a composite carbon-sulfide cathode to create a single bilayer film. The resulting films display superior flexibility and durability compared to solid-electrolyte films typically discussed in literature without compromising the thinness of the films. The bilayer film was then punched into 12.7 cm diameter discs and 4 cm by 5 cm sheets, pressed, and assembled into coin cells and pouch cells respectively. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, https://doi.org/10.1016/j.electacta.2021.139406.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (67) , 4541
Fabricating Solid-State Batteries for Electric Aviation
All-solid-state lithium batteries are widely reputed as the next major step in energy storage technology on account their drastically improved safety over wet cells, as solid electrolytes lack the volatile compounds in wet electrolytes that make them combustible. This enhanced safety enables a far wider range of products and vehicles to go fully electric and aligns with future NASA missions that require high performing, reliable, and safe batteries. However, they currently face issues with implementation in both aeronautical and consumer products due to the often-poor mechanical properties of the solid electrolyte and relative difficulty to manufacture [1]. Typical solid-state electrolyte challenges were bypassed by incorporating a range of polymeric binders into a solid electrolyte suspension and cast onto a composite carbon-sulfide cathode to create a single bilayer film. The resulting films display superior flexibility and durability compared to solid-electrolyte films typically discussed in literature without compromising the thinness of the films. The bilayer film was then punched into 12.7 cm diameter discs and 4 cm by 5 cm sheets, pressed, and assembled into coin cells and pouch cells respectively. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, https://doi.org/10.1016/j.electacta.2021.139406.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (6) , 1006
Fabrication of Solid-State Li-S Battery Components for Electric Aviation
The development of high-energy, high-safety, and high-power batteries beyond electric automobile requirements is vital for future electric aviation applications. The transition to non-volatile solid-state electrolytes (SSE) promises many advantages over traditional flammable liquid electrolytes, and may also be an enabling technology for next generation chemistries. However, significant manufacturing challenges must be overcome before the adoption of such technology. Electrolytes developed in this study were produced as sulfide-polymer composites with densified thicknesses between 20-30 microns using several processing techniques [1]. Ionic conductivity and lithium metal compatibility for the composites were compared and shown to retain reasonable ionic conductivity with improved flexibility and scalability which identifies a critical path for the production of practical solid-state batteries. Films were produced 10-15 times thinner than comparable bulk cold pressed powder electrolytes and achieved thicknesses comparable to commercial polyolefin separators (25 micron) used in commercial liquid containing lithium-ion cells. Composite conductivities were maintained above 0.2mS/cm, which holds promise for future electric aviation applications. Processing techniques are investigated to further improve electrochemical performance. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, https://doi.org/10.1016/j.electacta.2021.139406.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (6) , 1006
Fabrication of Solid-State Li-S Battery Components for Electric Aviation
The development of high-energy, high-safety, and high-power batteries beyond electric automobile requirements is vital for future electric aviation applications. The transition to non-volatile solid-state electrolytes (SSE) promises many advantages over traditional flammable liquid electrolytes, and may also be an enabling technology for next generation chemistries. However, significant manufacturing challenges must be overcome before the adoption of such technology. Electrolytes developed in this study were produced as sulfide-polymer composites with densified thicknesses between 20-30 microns using several processing techniques [1]. Ionic conductivity and lithium metal compatibility for the composites were compared and shown to retain reasonable ionic conductivity with improved flexibility and scalability which identifies a critical path for the production of practical solid-state batteries. Films were produced 10-15 times thinner than comparable bulk cold pressed powder electrolytes and achieved thicknesses comparable to commercial polyolefin separators (25 micron) used in commercial liquid containing lithium-ion cells. Composite conductivities were maintained above 0.2mS/cm, which holds promise for future electric aviation applications. Processing techniques are investigated to further improve electrochemical performance. [1] Donald A. Dornbusch, Rocco P. Viggiano, John W. Connell, Yi Lin, Vadim F. Lvovich. Practical considerations in designing solid state Li-S cells for electric aviation, Electrochimica Acta, 2021, 139406, ISSN 0013-4686, https://doi.org/10.1016/j.electacta.2021.139406.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (6) , 1069
Improving Cell-Level Specific Energy for All-Solid-State Lithium Sulfur Batteries
All-solid-state lithium-sulfur (Li-S) batteries are considered as one of the top choices toward 500 Wh/kg of specific energy, a key metric for an energy storage system that enables large regional electric aircrafts. Many obstacles remain, such as S utilization in the cathode, cyclability with regard to both cathode and anode as well as electrode-electrolyte interfaces, and effective means to increase the S content within the all-solid-state cell architecture. The latter is directly related to cell-level specific energy when considering the weights of all battery cell components. In this presentation, we discuss the efforts in both cathode optimization and cell-level improvement toward increasing the overall specific energy. Various strategies in improving S utilization and reducing the solid electrolyte layer thickness will be presented.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (6) , 1069
Improving Cell-Level Specific Energy for All-Solid-State Lithium Sulfur Batteries
All-solid-state lithium-sulfur (Li-S) batteries are considered as one of the top choices toward 500 Wh/kg of specific energy, a key metric for an energy storage system that enables large regional electric aircrafts. Many obstacles remain, such as S utilization in the cathode, cyclability with regard to both cathode and anode as well as electrode-electrolyte interfaces, and effective means to increase the S content within the all-solid-state cell architecture. The latter is directly related to cell-level specific energy when considering the weights of all battery cell components. In this presentation, we discuss the efforts in both cathode optimization and cell-level improvement toward increasing the overall specific energy. Various strategies in improving S utilization and reducing the solid electrolyte layer thickness will be presented.
- 23 May 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (22) , 27243-27252
Pressure Dependence of Solid Electrolyte Ionic Conductivity: A Particle Dynamics Study
The search for safe, reliable, and compact high-capacity energy storage devices has led to increased interest in all-solid-state battery research. The use of solid electrolytes provides enhanced safety and durability due to their reduced flammability and increased mechanical strength compared to organic liquid electrolytes. Still, the use of solid electrolytes remains challenging. A significant issue is their generally low Li-ion conductivity, which depends on the lattice diffusion of Li ions through the solid phase, as well as on the limited contact area between the electrolyte particles. While the lattice diffusion can be addressed through the chemistry of the solid electrolyte material, the contact area is a mechanical and structural problem of packing and compression of the electrolyte particles depending on their size and shape. This work studies the effect of pressurization on the electrolyte conductivity exploring cases of low as well as high grain boundary (GB) conductivity, compared to the bulk conductivity. Scaling dependence, σ ∼ Pη, of the conductivity σ with pressure P is revealed. For an idealized electrolyte represented as spheres in hexagonal closely packed configuration, η = 2/3 and η = 1/3 have been theoretically calculated for the two cases of low and high GB conductivity, respectively. For randomly packed spheres, the equivalent exponent values were numerically estimated to be approximately 3/4 and 1/2, respectively, which are higher than the closed packed values due to the additional decrease of porosity with the increase in pressure. As demonstrated in the study, experimental measurement of η can indicate which type of bulk or GB conductivity is dominant in a particular electrolyte powder and could be used in addition to electrochemical impedance spectroscopy measurements.
- 23 May 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (22) , 27243-27252
Pressure Dependence of Solid Electrolyte Ionic Conductivity: A Particle Dynamics Study
The search for safe, reliable, and compact high-capacity energy storage devices has led to increased interest in all-solid-state battery research. The use of solid electrolytes provides enhanced safety and durability due to their reduced flammability and increased mechanical strength compared to organic liquid electrolytes. Still, the use of solid electrolytes remains challenging. A significant issue is their generally low Li-ion conductivity, which depends on the lattice diffusion of Li ions through the solid phase, as well as on the limited contact area between the electrolyte particles. While the lattice diffusion can be addressed through the chemistry of the solid electrolyte material, the contact area is a mechanical and structural problem of packing and compression of the electrolyte particles depending on their size and shape. This work studies the effect of pressurization on the electrolyte conductivity exploring cases of low as well as high grain boundary (GB) conductivity, compared to the bulk conductivity. Scaling dependence, σ ∼ Pη, of the conductivity σ with pressure P is revealed. For an idealized electrolyte represented as spheres in hexagonal closely packed configuration, η = 2/3 and η = 1/3 have been theoretically calculated for the two cases of low and high GB conductivity, respectively. For randomly packed spheres, the equivalent exponent values were numerically estimated to be approximately 3/4 and 1/2, respectively, which are higher than the closed packed values due to the additional decrease of porosity with the increase in pressure. As demonstrated in the study, experimental measurement of η can indicate which type of bulk or GB conductivity is dominant in a particular electrolyte powder and could be used in addition to electrochemical impedance spectroscopy measurements.
- 6 April 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (15) , 7037-7042
Amide- and Urea-Based Solvents for Li–O2 Batteries. Part I: Experimental Evaluation
- 6 April 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (15) , 7037-7042
Amide- and Urea-Based Solvents for Li–O2 Batteries. Part I: Experimental Evaluation