JYJing Yang

Jing Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jing Yang has a total of 114 co-authors. Here are the top co-authors by number of shared publications:

  • Wei Liu

    Key Laboratory of Low‐Carbon Chemistry and Energy Conservation of Guangdong Province Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education, School of Materials Science and Engineering, and State Key Laboratory of Optoelectronic Materials and Technologies Sun Yat‐sen University Guangzhou China

    11 shared publications
  • Zhikun Zheng

    Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education GBRCE For Functional Molecular Engineering Guangdong Engineering Technology Research Centre For High‐performance Organic and Polymer Photoelectric Functional Films School of Chemistry IGCME and State Key Laboratory of Optoelectronic Materials and Technologies Sun Yat‐sen University Guangzhou China

    10 shared publications
  • Yuanyuan Zheng

    The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong Province Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education State Key Laboratory of Optoelectronic Materials and Technologies School of Materials Science and Engineering Sun Yat‐sen University Guangzhou 510006 P. R. China

    9 shared publications
  • Honglei Wang

    College of Light Industry and Food Technology Zhongkai University of Agriculture and Engineering Guangzhou China

    6 shared publications
  • Yi Li

    The Key Laboratory of Low-Carbon Chemistry & Energy Conservation of Guangdong Province Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education State Key Laboratory of Optoelectronic Materials and Technologies School of Materials Science and Engineering Sun Yat-sen University Guangzhou 510275 P. R. China

    6 shared publications
  • Yujing Sun

    The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong Province Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education State Key Laboratory of Optoelectronic Materials and Technologies School of Materials Science and Engineering Sun Yat‐sen University Guangzhou 510006 P. R. China

    6 shared publications

Latest Publications

  • In situ reconstruction of Cu 2 O/Cu heterointerfaces in CuO x nanowire arrays for efficient nitrobenzene-to-aniline electrocatalysis

    by Zixuan He, Shurong Li, Huifang Li, Wenjun Ning, Shitao Yang, Dongyang Lou, Jing Yang, Wei Huang

    CuO x nanowire arrays with in situ reconstructed Cu 2 O/Cu interfaces enable efficient nitrobenzene-to-aniline electroreduction via a PCET pathway with Cu( i )-mediated N–O bond activation, achieving broad substrate compatibility (84–99% selectivity).

  • Open Access

    Phase Diagram and Theoretical Calculation Guided Rational Design of Cu 6.26 Sn 5 /Sn Heterostructured Aerogel for Hydroxylamine Electrosynthesis

    by Wenjun Ning, Shitao Yang, Jiashu Chen, Boxuan Li, Guangping Zheng, Dongyang Lou, Wei Huang, Jing Yang

    Electrosynthesizing hydroxylamine (NH 2 OH) from nitrite (NO 2 − ) promises a green alternative to the hazardous Raschig process, yet catalyst development is trapped in a persistent selectivity–activity dilemma. Excessively strong adsorption of intermediates on the catalyst drives the over‑reduction of * NH 2 OH to ammonia, whereas overly weak adsorption depletes the interfacial reactant supply and yields to the competing hydrogen evolution reaction. Herein, guided by binary phase diagrams and density functional theory calculations, we report a one‐step co‐reduction strategy for the general synthesis of 3D intermetallic/metal heterostructured aerogels with freely tunable components—bypassing the sacrificial templates required by conventional methods. The resultant aerogel comprises a porous Sn scaffold decorated with Cu 6.26 Sn 5 intermetallic nanoparticles that form stable heterointerfaces. With cyclohexanone trapping in 0.5 m Na 2 SO 4 , the Cu 10 Sn 90 heterostructured aerogel achieves a remarkable Faradaic efficiency of 79.7% and yield rate of 0.731 mmol h −1 cm −2 toward cyclohexanone oxime. Molecular dynamics simulations reveal that the Cu 6.26 Sn 5 phase accelerates interfacial NO 2 − accumulation and mass transport, whereas the Sn scaffold serves as the dominant active center to undergo the reduction of NO 2 − and boost * NH 2 OH desorption. This study delivers a novel material design strategy for heterostructured aerogels toward highly selective electroreduction of NO 2 − to NH 2 OH.

  • Dual-functional electron withdrawing and active hydrogen trapping in CuRu aerogels unlock stable Cu+ sites for efficient electrocatalytic nitrate reduction to ammonia

    by Dongyang Lou, Simin Chen, Meijun Hou, Huifang Li, Wei Huang, Honglei Wang, Shurong Li, Qinghong Yuan, Yahui Yang, Zhong-Zhen Yu, et al.


  • High Entropy Oxynitride for Anti‐Poisoning Electrocatalytic Nitrogen Reduction

    by Yiwen Su, Xinzhong Wang, Jinjin Wu, Shurong Li, Jiashu Chen, Mingcong Tang, Yongbiao Mu, Wenyi Guo, Yongwei Wang, Sida Zhang, et al.

    Electrocatalytic nitrogen reduction reaction (eNRR) under ambient conditions is a promising route for sustainable ammonia synthesis, yet its progress is fundamentally limited by the inertness of N≡N bonds and the lack of robust, selective catalysts. Here, we report the first synthesis of a rutile‐structured high‐entropy oxynitride (HEON, CoFeTiVSnON). By leveraging the mixing entropy of five metal elements and dual anion regulation, HEON achieves dynamically regenerable nitrogen vacancies, and a tunable electronic structure. Operando spectroscopic investigations and density functional theory (DFT) calculations reveal that HEON uniquely activates N 2 via a stabilized vacancy‐mediated quasi Mars‐van Krevelen (MvK) mechanism, wherein nitrogen vacancies directly participate in the catalytic cycle, enabling continuous vacancy formation and healing. Correspondingly, the NH 3 poisoning and vacancy depletion issues that plague conventional binary nitrides have been circumvented whilst breaking linear scaling relationship of intermediate adsorption. The HEON catalyst delivers a high NH 3 yield rate of 159.2 µg h −1 mg cat. −1 and a Faradaic efficiency of 46.6% at −0.5 V vs. RHE, with good structural stability over extended operation. Our work establishes high‐entropy oxynitrides as a transformative platform for multi‐step electrocatalysis, and provides mechanistic insights for the rational design of catalysts stabilized by high entropy effects.

  • Nitrate-Driven Proton-Coupled Photoelectron Transfer Enables Cascade C–N Coupling of Lactic Acid to Alanine

    by Qingshuang Xu, Kangyu Lou, Na Wu, Zhonggang Liu, Jing Yang, Jesse S. Dondapati, Zhiguang Zhang, Lidong Gong, Libin Zeng

    The sustainable synthesis of amino acids from waste-derived feedstocks remains challenged by high energy input, costly nitrogen source, and inefficient C-N formation efficiency of conventional bio-, thermo-, and photocatalytic routes. Here, we report an integrated electro-photoelectric cascade system that enables high-efficiency alanine production by coupling polylactic acid (PLA)-derived LA with hydroxylamine (NH2OH), selectively generated in situ via electrocatalytic nitrate reduction (NO3-RR). This cascade delivers a record alanine yield rate of 149.7 mmol gcat.-1 h-1 with 87.7% selectivity and further enables gram-scale alanine production under laboratory conditions, demonstrating practical scalability beyond proof of concept. Incorporation of trace Ru single atoms into MoS2 nanosheets (Ru-MoS2) creates abundant sulfur vacancies (Sv) that modulate the local electronic environment and promote efficient NH2OH utilization. Mechanistic investigations reveal a proton-coupled photoelectron transfer (PCPET) pathway, in which Mo sites dissociate water to supply protons, Ru sites mediate NH2OH-carbonyl condensation to form oxime intermediates, and the coupled delivery of protons and photoexcited electrons lowers the barrier for subsequent hydrogenation to alanine. Preliminary techno-economic analysis suggests that the NO3--driven cascade offers a favorable cost-control profile, enabled by efficient nitrogen utilization and integrated waste management. Beyond performance metrics, this work highlights how coupling nitrogen speciation with interfacial charge-proton coordination can unlock new reaction manifolds for sustainable C-N bond formation.


  • Open Access

    Low‐Ru‐Content CuCoRu Aerogel for Boosted Electrocatalytic Nitrate Reduction to Ammonia

    by Jinjie Tan, Wenjun Ning, Jiashu Chen, Dongyang Lou, Zhehang Jiang, Shurong Li, Rui Zhou, Weichun Chang, Xiu‐Zhi Tang, Libin Zeng, et al.

    Electrocatalytic nitrate reduction to ammonia (eNRA) offers a sustainable and green pathway for ammonia (NH 3 ) synthesis. Although due to the inferior hydrogenation ability, Cu‐based nonprecious electrocatalysts often suffer a low NH 3 Faradaic efficiency and high overpotential are often needed to deep reduction of *NO 2 , resulting in a high energy consumption. Herein, a galvanic replacement strategy is proposed to synthesize a CuCoRu Aerogel (CuCoRu AG) electrocatalyst with low‐content Ru (10.7 at%) to realize efficient eNRA at a significantly reduced overpotential. The optimized Cu 5 Co 5 Ru AG displays a remarkable NH 3 yield rate of 2.7 ± 0.1 mmol cm −2 h −1 with an ultrahigh Faradaic efficiency of 97.0 ± 3.81% at −0.1 V versus RHE, surpassing most reported Cu‐based electrocatalysts. Systematic characterizations and theoretical calculations indicate that the rational incorporation of low amounts of Ru can further regulate the electronic state to significantly reduce the hydrogenation barrier. Furthermore, the robust Aerogel network architecture provides a good self‐supportability to avoid excess agglomeration and ripening, endowing a long‐term operational durability over 100 h of continuous electrolysis. This work underscores the pivotal role of electronic structure regulation and three‐dimensional porous architectures in the design of next‐generation, low‐cost, and high‐efficiency eNRA electrocatalysts.


  • A Reaction-Diffusion-Coupled Strategy for Ampere-Level Electrocatalytic Nitrate Reduction to Ammonia

    by Shurong Li, Yiwen Su, Hao Wan, Zhehang Jiang, Tianhao Niu, Yong Zhang, Wei Huang, Libin Zeng, Haiqing Zhou, Guangping Zheng, et al.

    Ampere-level electrocatalytic nitrate reduction to ammonia (eNRA) offers a carbon-neutral alternative to the Haber-Bosch process. However, its energy efficiency is critically hampered by the inherent conflict between the reaction and diffusion. Herein, we propose a reaction-diffusion-coupled strategy implemented on a well-tailored CuCoNiRuPt high-entropy alloy aerogel (HEAA) to simultaneously realize energy barrier homogenization and accelerate mass transport, endowing ampere-level eNRA with a high energy efficiency. The resultant HEAA delivers an ammonia yield rate of 3.4 ± 0.3 mmol·h-1·cm-2 and a Faradaic efficiency of 98 ± 2% at a record-low overpotential of -0.05 V versus a reversible hydrogen electrode, enabling an energy efficiency of 41.5 ± 0.8% and a durable operation at industrial current density. Pragmatic deployment is further envisaged in a membrane electrode assembly electrolyzer to achieve practical-scale ammonia production with a yield rate of 4.3 ± 0.1 mmol·h-1·cm-2 at 1 A·cm-2. This work pioneers new pathways for developing efficient catalysts toward the industrial application of eNRA.


  • High‐Performance CuCo Aerogel Electrocatalyst for Relay Electroreduction of Nitrate to Ammonia

    by Zhehang Jiang, Shujuan Jiang, Wei Huang, Shurong Li, Simin Chen, Huifang Li, Guangping Zheng, Jing Yang

    Renewable energy‐driven electroreduction of nitrate to ammonia presents a low‐carbon and promising route for sustainable ammonia synthesis. For Cu‐based electrocatalysts, due to their sluggish kinetics of the hydrogenation steps, nitrite often accumulates on the electrocatalysts surface, resulting in low ammonia yield rate and selectivity, as well as serious deactivation of electrocatalysts. Herein, a continuous relay site construction strategy that integrates the Cu─Co relay sites into an interconnected porous network is proposed. Owing to the adequately exposed interconnected Cu─Co relay sites, regulated adsorption energy of the nitrate and intermediates, promoted hydrogenation ability, and excellent self‐supportability of 3D skeleton, the Cu 50 Co 50 aerogel realizes the high‐efficiency relay catalysis with an ultrahigh NH 3 yield rate of 3.3 ± 0.27 mmol·h −1 ·cm −2 (2110 ± 173 mmol·h −1 ·g cat −1 ) and a large NH 3 Faraday efficiency of ≈100% at −0.2 V vs. RHE. The potential need for the Cu 50 Co 50 aerogel in the electrocatalysis at an industrial‐level current density remains stable even after 100‐h chronopotentiometry measurement, demonstrating excellent long‐term stability. Besides, the large‐scale preparation (>1 g) of the Cu 50 Co 50 aerogel can be easily achieved, and its exceptional performance is maintained consistently. Such a continuous relay site construction strategy opens a new way for developing advanced electrocatalysts for high‐efficiency relay catalysis.


  • Open Access

    Interfacially Locked Metal Aerogel Inside Porous Polymer Composite for Sensitive and Durable Flexible Piezoresistive Sensors

    by Jian Li, Ning Li, Yuanyuan Zheng, Dongyang Lou, Yue Jiang, Jiaxi Jiang, Qunhui Xu, Jing Yang, Yujing Sun, Chuxuan Pan, et al.

    Flexible pressure sensors play significant roles in wearable devices, electronic skins, and human‐machine interface (HMI). However, it remains challenging to develop flexible piezoresistive sensors with outstanding comprehensive performances, especially with excellent long‐term durability. Herein, a facile “interfacial locking strategy” has been developed to fabricate metal aerogel‐based pressure sensors with excellent sensitivity and prominent stability. The strategy broke the bottleneck of the intrinsically poor mechanical properties of metal aerogels by grafting them on highly elastic melamine sponge with the help of a thin polydimethylsiloxane (PDMS) layer as the interface‐reinforcing media. The hierarchically porous conductive structure of the ensemble offered the as‐prepared flexible piezoresistive sensor with a sensitivity as high as 12 kPa−1, a response time as fast as 85 ms, and a prominent durability over 23 000 compression cycles. The excellent comprehensive performance enables the successful application of the flexible piezoresistive sensor as two‐dimensional (2D) array device as well as three‐dimensional (3D) force‐detecting device for real‐time monitoring of HMI activities.


  • Open Access

    Pt–Pd Bimetallic Aerogel as High-Performance Electrocatalyst for Nonenzymatic Detection of Hydrogen Peroxide

    by Chuxuan Pan, Yuanyuan Zheng, Jing Yang, Dongyang Lou, Jian Li, Yujing Sun, Wei Liu

    Hydrogen peroxide (H2O2) plays an indispensable role in the biological, medical, and chemical fields. The development of an effective H2O2 detecting method is of great importance. In the present work, a series of PtxPdy bimetallic aerogels and Pt, Pd monometallic aerogels were controllably synthesized by one-step gelation method. Their morphologies and compositions were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and so forth. These aerogels were used as nonenzyme electrocatalysts for the detection of H2O2. The cyclic voltammetric and amperometric results demonstrated that the performance of the metal aerogels showed volcano-type behavior, with the Pt50Pd50 aerogel sitting on top. The Pt50Pd50 aerogel-based electrochemical sensor exhibited excellent comprehensive performance, with a low overpotential of −0.023 V vs. Ag/AgCl, a broad linear range from 5.1 to 3190 μM (R2 = 0.9980), and a high sensitivity of 0.19 mA mM−1 cm−2, in combination with good anti-interference ability and stability. A comprehensive study indicated that the superior sensing performance of the Pt50Pd50 aerogel is closely related to its optimized d-band center and larger cumulative pore volume. This work first applied Pt–Pd bimetallic aerogels into the detection of H2O2 and shows the promising application of noble metal aerogels in the electrochemical sensing area.