MKMaxim V. Kopylov

Maxim V. Kopylov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maxim V. Kopylov has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Исследование режимов экструдирования комбикормов для домашних животных

    by А.н. Остриков, М.в. Копылов, И.а. Сапелкин

    Сбалансированные комбикорма, предварительно подвергнутые пропариванию с целью обеспечения клейстеризации крахмала и подавления патогенной микрофлоры, экструдировали для повышения переваримости крахмала и увеличения количества растворимых углеводов. Экструдированные корма показали высокую устойчивость к окислительной порче и микробиологической контаминации. Двухстадийная и одностадийная обработка продемонстрировали сопоставимые результаты по стабильности химического состава без потери конечного качества продукта для питания домашних животных. В процессе 4-месячного хранения происходит постепенное нарастание бактериальной и грибной обсемененности, что указывает на необходимость соблюдения герметичных условий хранения. Апробация корма на собаках породы бигль подтвердила практическую пригодность разработанного корма. Validated feed source mixture formulations, steamed to ensure starch gelatinization and suppress pathogenic microflora, were extruded to increase the digestibility of starch and soluble carbohydrates. The extruded feeds demonstrated high resistance to oxidative spoilage and microbiological contamination. Two-stage and single-stage processing demonstrated comparable results in chemical composition stability without loss of final product quality for pet nutrition. During 4-month storage, a gradual increase in bacterial and fungal contamination occurs, indicating the need for hermetically sealed storage conditions. Feed testing on beagle dogs confirmed the practical suitability of the developed feed.

  • Open Access

    Mathematical model of the process of applying a chitosan layer to the surface of pseudo-encapsulated fish feed pellets

    by K. V. Mishinev, A. N. Ostrikov, M. V. Kopylov, A. S. Muraviev, К. В. Мишинев, А. Н. Остриков, М. В. Копылов, А. С. Муравьев

    Research conducted on the development of pseudo-encapsulated compound feed using vacuum deposition of fat components onto the surface of extruded pellets and subsequent application of a protective chitosan coating allowed us to identify the most significant factors influencing oil retention and specific energy consumption. It was found that oil retention depends on the vacuum level in the coating machine's working chamber, the diameter of the extruded pellets, and the duration of the main process steps. Specific energy consumption is significantly affected by the fat content of the extruded pellets, the rotational speed of the coating machine's paddle shafts, and the filling level of the coating machine's working chamber. To assess the significance of the influence of the studied factors, regression equations were obtained because of mathematical processing. These equations describe the dependence of the oil retention coefficient on the vacuum value in the working chamber of the coating machine, the diameter of the extruded granules, and the duration of the main operations of the technological process, as well as the value of specific costs on the fat content in the extruded granules, the rotation frequency of the paddle shafts of the coating machine, and the degree of filling of its working chamber. The adequacy of the regression equations was confirmed by the significance level of the equation coefficients (p > 0.05) and the value of the determination coefficients (R2 > 0.99). Graphic dependencies were constructed in the form of two-parameter dependencies, which allowed for an in-depth analysis of the response surface and visualization of the two-factor influence of the obtained regression models. The obtained regression dependencies were used in the engineering calculation methodology for a coating machine for the production of pseudo-encapsulated fish feed.

  • Open Access

    Rationale for the use of chitin and chitosan for pseudo-encapsulation of fish feed

    by K. V. Mishinev, A. N. Ostrikov, M. V. Kopylov, I. S. Bogomolov, К. В. Мишинев, А. Н. Остриков, М. В. Копылов, И. С. Богомолов

    This article presents a comprehensive scientific and technological rationale for the use of chitin and its derivative chitosan to create protective inert shells (pseudocapsules) on fish feed pellets. The relevance of this work stems from the need to address key issues in modern aquaculture related to the loss of water-soluble nutrients, lipid oxidation, and microbiological spoilage of feed, particularly when using alternative, high-fat ingredients, including plant-based ones. The authors demonstrate that chitin, a high-molecular-weight aminopolysaccharide obtained from crustacean shells, possesses a unique combination of properties that make it an ideal material for pseudoencapsulation. These include chemical inertness, mechanical strength, heat resistance, non-toxicity, biodegradability, and, crucially, pronounced barrier and antimicrobial properties. The resulting chitinous film prevents the leaching of vitamins, amino acids, and minerals into water, protects fats from rancidity, inhibits the growth of pathogenic microflora (including Staphylococcus aureus), and thereby significantly increases the shelf life of the feed. In terms of technology, the article describes an improved production process, including extrusion, vacuum impregnation of pellets with liquid components, and final application of a chitinous coating. This allows for programmable feed properties, such as buoyancy and sinking speed, and ensures high water stability of the pellets, which is critical for feeding valuable fish species (sturgeon, salmon). The practical value of the study is confirmed by the results of production trials on sturgeon. The use of pseudoencapsulated compound feed increased nutrient digestibility by 10-12%, increased weight gain by 10-12%, and reduced feed conversion by 15%. The economic effect resulted in a reduction in feed costs per unit of production by 8-12%. The presented starter and grower feed formulations meet the physiological needs of fish, and microbiological analysis confirmed their environmental friendliness and improved sanitary properties. Thus, the study demonstrates that pseudoencapsulation using chitin and chitosan is an effective innovative solution. It aims to improve the nutritional value, shelf life, and cost-effectiveness of compound feed, thereby contributing to the sustainable development of industrial aquaculture.


  • Open Access

    Investigation of the kinetics of three-stage processing of vegetable oil coapstocks

    by N. I. Tsapkina, A. N. Ostrikov, M. V. Kopylov, I. S. Bogomolov

    The aim of the study is to identify the kinetic patterns of a three-stage technology for obtaining fatty acids from soapstocks, including alkaline saponification of hydrated vegetable oil, desalination with sodium chloride, hydrolysis and decomposition of the soap core with sulfuric acid, as well as washing of the obtained fatty acids. The kinetic patterns of each of the three stages of soapstock processing were investigated. The hydrated vegetable oil was subjected to alkaline saponification with a sodium hydroxide solution with a concentration of 30-45% in an amount of 15% by weight of the raw material for 240 minutes at a temperature of 90-95 ° C with stirring until a soap glue was obtained. It was found that the duration has a greater effect on the acid yield than the concentration of the sodium hydroxide solution. Increased saponification time from 60 to 240 minutes. increases the yield of fatty acids by 1.58 times. The resulting saponified mass was salted with sodium chloride at a concentration of 16-20 % for 75-80 minutes at boiling point and constant mixing. The rational salting conditions were determined: duration (80 min.) and concentration of sodium chloride (20%). The resulting soap core was decomposed with a solution of sulfuric acid in two stages: in the first stage, with sulfuric acid with a concentration of 10-12% at a hydrolysis temperature of 110-115 ° C for 40 minutes; in the second stage, with sulfuric acid with a concentration of 80-92% at a decomposition temperature of 90 ° C for 85 minutes, stirring the mass until the soap completely decomposes. The resulting fatty acids had a significantly lower mass fraction of moisture and volatile substances and an increased cleavage depth.

  • Open Access

    Investigation of kinetic patterns of the process of obtaining proteins from sunflower meal

    by M. V. Kopylov, A. A. Derkanosova, R. U. Umarkhanov, A. A. Berestovoy, A. A. Torshina

    The article is devoted to the development and experimental research of the technology of complex processing of sunflower meal in order to obtain valuable protein concentrates. The relevance of the work is due to the need for rational and in-depth use of secondary products of the fat and oil industry to create food and feed additives with high nutritional value. During the research, a multi-stage technological process was tested, including such key operations as crushing and fractionation of raw materials, hydrolysis, centrifugation, baromembrane separation and final dehydration of the obtained fractions. The central place in the work is given to the selection of optimal parameters of baromembrane separation. Ceramic and polymer membranes with different pore sizes were tested. It was found that the polymer membrane (200 Da) retains the entire protein, but does not provide selectivity, while the ceramic membrane (1.4 microns) passes over 60% of the target product. As a result of a comprehensive analysis of performance and selectivity, a ceramic membrane with a pore size of 0.14 microns, 23 channels and a filter surface of 0.35 m2 was found to be optimal. The second important part of the work was the study of the drying process of liquid protein concentrate on a spray dryer. Rational modes have been identified to ensure the production of a dry bulk product with specified quality parameters. The highest efficiency was achieved using a 2.0 mm diameter nozzle, a coolant inlet temperature of 384.3–390 K and an outlet temperature of 348.0–352.5 K, and a product feed rate of 3.09–3.42 kg/h. This made it possible to obtain a ready-made powder of light brown color with a moisture content of 6.48–6.83%. As a result of the work, the effectiveness of the proposed technology was scientifically substantiated and experimentally confirmed, the optimal parameters of the key stages of the process were determined, which makes it possible to recommend it for practical implementation in the conditions of processing enterprises.

  • Разработка элементов автоматизированной системы расчета и проектирования лопастного двухвального смесителя

    by А.н. Остриков, М.в. Копылов, К.в. Мишинев, И.а. Сапелкин

    Разработана методика автоматизированного расчета лопастного двухвального смесителя для получения полнорационных комбикормов, в котором реализована технология смешивания в квазиневесомом режиме. Данная технология учитывает влияние следующих факторов процесса смешивания: физико-механических свойств получаемых смесей; конструктивных размеров; формы лопастей смесителя; кинематического режима процесса смешивания. Система расчета смесителя позволяет рассчитать основные технологические, конструктивные и энергетические параметры. В качестве среды разработки использован QT Creator 5.14.2. Главное окно приложения включает меню, вкладки ввода исходных данных для проведения расчетов, панель отображения результатов расчета (производительность, геометрические характеристики смесителя с основными размерами, мощность электродвигателя). Спроектирована оригинальная конструкция лопастного двухвального смесителя, в которой определены рациональные конструктивные параметры рабочей камеры и мешалки. A methodology for automated calculation of a twin-shaft paddle mixer for obtaining complete compound feed has been developed, which implements the technology of mixing in a quasi-weightless mode, taking into account the influence of three groups of factors of the mixing process: physical and mechanical properties of the resulting mixtures; design dimensions and shape of the mixer blades and the kinematic mode of the mixing process. The developed automated system for calculating the mixer allows calculating the main technological, design and energy parameters. QT Creator 5.14.2 was used as the development environment. The main application window includes: menu, input tabs for initial data for calculations, calculation results display panel: productivity, geometric characteristics of the mixer with main dimensions and electric motor power. An original design of a paddle twin-shaft mixer was designed, in which rational design parameters of the working chamber and mixer design were determined.

  • Open Access

    Study of quality indicators of fatty acids obtained during soapstock pro-cessing by three-stage technology

    by A. N. Ostrikov, M. V. Kopylov, N. I. Tsapkina, A. V. Terekhina, V. N. Vasilenko

    Fatty acids were obtained from soapstocks by a combined three-stage technology, which includes three consecutive stages: the first is saponification of the feedstock with a sodium hydroxide solution, the second is salting out with sodium chloride; the third is a two-stage hydrolysis and decomposition with a solution of sulfuric acid with a concentration of 10–12%, and then with sulfuric acid with a concentration of 80–92%. The organoleptic, physicochemical and other quality indicators of the fatty acids obtained under the rational conditions identified were determined. It was found that the fractional composition of the fatty acids obtained corresponded to the characteristics of fatty acids in first-grade light oils, indicating their high quality. The fatty acids have the following indicators: mass fraction of moisture and volatile substances – 1.8%, mass fraction of total fat – 97.1%, depth of oleic acid cleavage – 64.3%. Comparative analysis of the physicochemical indicators of fatty acids obtained by three methods: decomposition with sulfuric acid, saponification and decomposition with sulfuric acid and saponification, salting out and decomposition with sulfuric acid showed that the concentrations of the main fatty acids (stearic, oleic, linoleic acid) obtained by the third method (saponification, salting out and decomposition with sulfuric acid) were higher than those obtained by the first two methods.

  • Open Access

    Features of calculation and design of a combined apparatus for obtaining fatty acids from soapstocks

    by A. N. Ostrikov, M. V. Kopylov, N. I. Tsapkina, A. V. Terekhina, V. N. Vasilenko

    The development of a methodology for the automated design of a reactor for producing fatty acids from soapstocks of vegetable oils is presented. The universal reactor design allows for the sequential execution of key technological processes: alkaline saponification of hydrated vegetable oil, salting out with sodium chloride, hydrolysis and decomposition of the soap core with sulfuric acid, and washing of the resulting fatty acids. The developed methodology takes into account the physico-mechanical properties of the mixtures, the design parameters of the equipment, and the kinematic regime of the process, ensuring high accuracy in calculations and adaptation of the reactor to specific production tasks. For the implementation of calculations, the QT Creator 5.14.2 development environment was used, enabling the creation of cross-platform applications for Windows and Linux operating systems. The software includes algorithms for technological, thermal, and structural calculations, as well as the selection of the mixer type and apparatus design. The implementation of the automated design system minimizes design costs and optimizes reactor parameters. The separate execution of processes in different reactors contributes to improved environmental conditions and reduced energy consumption. The developed system allows for the modeling of rational designs of the main working components of the reactor, determination of optimal technological and structural parameters, and minimization of equipment design costs. The results of this work can be applied in the food, chemical, and other industries to enhance the efficiency of fatty acid production processes from vegetable oil soapstocks.


  • Open Access

    Mathematical modeling of multi-cereal raw material melt flow in the coextrusion process

    by A. N. Ostrikov, A. A. Ospanov, V. N. Vasilenko, A. K. Timurbekova, M. V. Kopylov, A. T. Almaganbetova

    A mathematical model of the melt flow of a multi-cereal mixture in an extruder channel has been developed to determine the rational parameters of the coextrusion process. The mathematical model includes the equation of motion and the equation of energy conservation and boundary conditions, as well as the rheological law of the melt flow of the mixture under study. As a result of the calculations, the geometric parameters of the screw, the depth and width of the extruder channel, the average flow rate and the temperature of the extrudate along the length of the working chamber were determined. A comparison of the calculated extrudate temperature Tk = 136.2 °C and its experimental value Tk = 135 °C shows high adequacy. The numerical solution of the mathematical model of the flow of a viscous liquid melt of the studied mixture in the considered section through the extruder channel allows us to establish the nature of the change in the speed and pressure of the extrudate melt. The obtained dependencies formed the basis for the calculation and design of the twin-screw extruder design, each screw of which consists of three zones: the first compression zone, which includes three sections: loading, compression and dosing; decompression-extraction zone, which includes two sections: decompression and extraction; and the second compression zone, which includes two sections: homogenization and injection. The use of a twin-screw extruder will expand the technological capabilities of the extruder for the production of extruded products of various polycomponent compositions; ensure the necessary depth of physicochemical transformations of the components of the processed product due to the regulation of heat supply.


  • Open Access

    Average Integral Assessment of Water Binding Capacity in Sugar-Containing Confectionery Products

    by Vladimir Arapov, Inessa Plotnikova, Dmitry Kazartsev, Konstantin Polansky, Gazibeg Magomedov, Maxim Kopylov, Viktor Plotnikov

    Confectionary products must retain their freshness during the entire shelf-life period, and this quality should be considered at the stage of formulation design. As a result, moisture binding capacity of food products is an important research area. This research featured the average integral moisture binding capacity of sugar-containing materials to be used in confectionery products. The research featured two groups of products. The first included thick syrups of sugar, molasse, glucose, fructose, glucose+fructose, and isomalt with a moisture content of 17.2-19.8%. The second included starch hydrolysates, i.e., various starch molasses and glucose+fructose syrup with a humidity of 17.0-22.4%. To assess the water binding capacity, the authors appealed to the method developed by Prof. V.M. Arapov. A higher total relative equivalent of free water ω_total (U_1,U_2 ) increased the water retention capacity. A lower value of ω_total (U_1,U_2 ) correlated with a higher water activity Aw. In sugar syrup, Aw was 0.830 at ω_total (U_1,U_2 )=13; in sugar+molasse syrup, Aw was 0.701 at ω_total (U_1,U_2 ) =14.5; in low-sugar molasse, Aw was 0.745 at ω_total (U_1,U_2 )=16.5; in caramel acid molasse, Aw equaled 0.727 at ω_total (U_1,U_2 )=27.5; in isomalt syrup, Aw was 0.623 at ω_total (U_1,U_2 )=44.5; in high-sugar molasse, Aw was 0.680 at ω_total (U_1,U_2 )=46; in glucose syrup, Aw reached 0.548 at ω_total (U_1,U_2 )=48.5; in glucose+fructose syrup, Aw was 0.583 at ω_total (U_1,U_2 )=53; in fructose syrup, Aw was 0.499 at ω_total (U_1,U_2 )=61.5. The values of ω_total (U_1,U_2 ) of fructose syrup were 4.7...1.2 times higher than in other products. Prof. V.M. Arapov’s method rendered both qualitative and quantitative analysis of moisture in a food product. Sugar, sugar+molasse, and low-sugar molasse syrups with ω_total (U_1,U_2 ) as low as 16.5…13 had the best results in protecting confectionery products from water absorption. Fructose, glucose+fructose, glucose, and high-sugar molasse syrups with the value of ω_total (U_1,U_2 ) as high as 61.5…46 could prolong the shelf-life of the finished product. The method demonstrated a good industrial and commercial potential.