Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jincheng Lei has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Laser co-sintering of dissimilar ceramic heterostructures through temperature gradient control and hybrid laser manufacturing

    by Yide Hu, Xuran Zhu, Haiquan Xian, Guichao He, Yanzong Meng, Leyu Shen, Wei Zhang, Jincheng Lei

  • Open Access

    Additive manufacturing of barium titanate-aluminum oxide piezoelectric ceramic composites using fused deposition modeling

    by Pei Xiang, Guichao He, Juqing Li, Zhichao Yu, Zuxin Liu, Jiaming Liang, Haiquan Xian, Junwei Zhu, Qiurui Zhang, Jincheng Lei

  • Open Access

    Design of a Low-Power RFID Sensor System Based on RF Energy Harvesting and Anti-Collision Algorithm

    by Xin Mao, Xuran Zhu, Jincheng Lei

    Passive radio frequency identification (RFID) sensing systems integrate wireless energy transfer with information identification. However, conventional passive RFID systems still face three key challenges in practical applications: low RF energy harvesting efficiency, high power consumption of sensor loads, and high complexity of tag anti-collision algorithms. To address these issues, this paper proposes a hardware–software co-optimized RFID sensor system. For hardware, low threshold RF Schottky diodes are selected, and an input inductor is introduced into the voltage multiplier rectifier to boost the signal amplitude, thereby enhancing the radio frequency to direct current (RF-DC) energy conversion efficiency. In terms of loading, a low-power management strategy is implemented for the power supply and control logic of the sensor node to minimize the overall system energy consumption. For algorithmic implementation, a Dual-Threshold Stepped Dynamic Frame Slotted ALOHA (DTS-DFSA) anti-collision algorithm is proposed, which adaptively adjusts the frame length based on the observed collision ratio, eliminating the need for complex tag population estimation. The algorithm features low computational complexity and is well suited for resource constrained embedded platforms. Through simulation validation, we compare the conversion efficiency of the RF energy harvesting circuit before and after improvement, the current of the sensor load in active and idle states, and the performance of the proposed algorithm against the low-complexity DFSA (LC-DFSA). The results show that the maximum conversion efficiency of the improved RF energy harvesting circuit has increased from 60.56% to 68.69%; specifically, the sensor load current drastically drops from approximately 2.0 mA in the active state to around 74 μA in the idle state, validating the efficacy of the proposed power gating strategy, and the proposed DTS-DFSA algorithm outperforms existing low-complexity schemes in both identification efficiency and computational complexity.

  • In Situ Assembly of a Perovskite Photodetector with Broadband Response by Magnetic-Field-Assisted Pulsed Laser Deposition

    by Juqing Li, Qiurui Zhang, Zhichao Yu, Pei Xiang, Jincheng Lei

    All-inorganic perovskite quantum dots (IPQDs) are emerging optoelectronic materials for next-generation photodetectors. However, the assembly of IPQDs to photodetectors remains challenging due to the poor controllability of the material deposition processes. Herein, a magnetic-field-assisted pulsed laser deposition (MF-PLD) technology is developed to fabricate CsPbBr3 perovskite photodetectors with a broadband response. Owing to the focusing effect of the magnetic field, the laser-sputtered CsPbBr3 plasma plumes are confined into a focused plume beam when passing through a magnetic lens and subsequently in situ assembled to the gaps between two interdigitate electrodes of the photodetector. By controlling the magnetic field strength during MF-PLD, the morphology of the deposited CsPbBr3 is flexibly manipulated from aggregated large particles to cross-linked nanowire clusters, resulting in the effective control of the optoelectronic properties. The fabricated CsPbBr3 perovskite photodetectors exhibit a detection range of 265-532 nm, and the relationship between the photodetection performance and the applied magnetic field of MF-PLD was evaluated. The photodetectors fabricated by MF-PLD exhibit improved stability after repeated response-recovery cycles, and their long-term stability is significantly improved through encapsulation, maintaining 85% of the original response after 270 days in air. This work provides a universal strategy to fabricate perovskite-based optoelectronic devices, facilitating the applications of IPQDs.

  • Laser-driven anion exchange for precise composition control in perovskite materials with tunable optical properties

    by Qiurui Zhang, Pei Xiang, Juqing Li, Jincheng Lei

    Perovskite quantum dots (QDs) have attracted great attention due to their tunable bandgap and emission wavelength, which can be adjusted by simply modifying the halide composition. However, it is still a challenge to achieve precise control of the composition of perovskite QDs due to the rapid and uncontrollable reactions. Herein, a laser-driven anion exchange method is developed to achieve precise control on the composition of perovskite QDs and optical properties. By adjusting the laser power density, the emission wavelength of the films can be continuously tuned from 414 to 648 nm. Sandwich and heterojunction structures are successfully fabricated by controlling the position of the laser spot irradiation. Furthermore, this method can fabricate films with a smooth, dense particle surface morphology, which provides potential applications in fields such as full-color displays and solar cells. The long-term stability of perovskite QDs films is achieved by using encapsulation technology, with excellent optical stability even after 50 days of immersion in water.

  • Laser-Induced Fabrication of Multicolor Perovskite Quantum Dot Patterns with Multiple Information Encryption Modes

    by Qiurui Zhang, Juqing Li, Zhichao Yu, Pei Xiang, Longya Xiao, Jincheng Lei

    The development of patterned metal halide perovskite quantum dots (MHP QDs) has become an important strategy to explore new functionalities and applications in optoelectronics. Herein, a laser-induced technology is developed to fabricate multicolor MHP QD patterns to achieve multiple information encryption modes. To precisely control the synthesis reactions, PbBr2 and CsBr, the precursors of CsPbBr3 QDs, are separately coated on the donor glass and target substrates and stacked into a donor-PbBr2-CsBr-target structure. A femtosecond laser is focused at the interface of PbBr2 and CsBr to induce localized ionic transportation and reaction so that CsPbBr3 QDs are precisely synthesized at the laser spot. By applying the environmental lability and low formation energy of perovskites, the PL emission of the laser-synthesized CsPbBr3 QDs can be reversibly eliminated under a moisture environment and recovered in situ by laser scanning for many cycles. This reversible PL behavior is attributed to the phase transformation between CsPbBr3 and CsPb2Br5 induced by the repeated laser irradiation and moisture treatment and is promising for applications in information encryption, anticounterfeit, and optical data storage. Furthermore, MHP patterns with multiple color emissions are synthesized by adjusting the precursors, demonstrating the flexibility of the developed technology in color tuning of MHP QDs.


  • Open Access

    Laser‐Induced in situ Synthesis and Assembly of Nano‐Cotton TiO2 Humidity Sensors with High Sensitivity and Fast Response for Real‐Time Respiratory Monitoring

    by Zhichao Yu, Juqing Li, Qiurui Zhang, Pei Xiang, Jincheng Lei

    Humidity sensors functioned by 1D nanostructural metal oxides (1D NMOs) are promising for real‐time respiratory monitoring. However, the preparation and assembly of 1D NMOs on sensor structures are quite challenging due to the complicated synthesis procedures and vulnerability of nanomaterials. Herein, a multi‐laser processing technology is developed to fabricate nano‐cotton TiO2 humidity sensors for respiratory monitoring. The nano‐cotton TiO2 is in situ synthesized and assembled to the interdigitate electrodes of the sensor structure using the transmitted picosecond laser deposition. The as‐deposited TiO2 layers are in situ post‐annealed by a CO2 laser to optimize the crystallinity and phase compositions for humidity sensing. By investigating the evolution mechanism of the nanostructures of the laser‐induced plasma plumes during sputtering, it is demonstrated that the nanostructures of the laser‐deposited TiO2 layers can be flexibly controlled by varying the target‐to‐substrate distance. The crystallinity, phase composition, surface roughness, and layer thickness of the nano‐cotton TiO2 are estimated to evaluate the developed technology. The fabricated sensors exhibit high sensitivity and rapid response to the variation of relative humidity under both steady and transient states. To demonstrate for real‐time respiratory monitoring, the fabricated sensor is integrated into a commercial mask to monitor human's breathing under different respiratory modes.


  • Mild Fabrication of Polymeric Porous/Nonporous Micro‐Composite Structures via Enhancing the Photothermal Conversion of Ultrafast Laser

    by Pei Xiang, Haobo Zhang, Qiurui Zhang, Zhichao Yu, Yihao Wang, Juqing Li, Jincheng Lei

    Localized foaming of polymers is promising to fabricate polymeric composite structures for applications in biomedical, aerospace, automotive, etc. However, the severe pyrolysis and carbonization of polymer chains during localized foaming may degrade the bulk strength. Herein, a mild localized foaming strategy is proposed to fabricate poly(lactic acid) (PLA) micro‐foams within dense PLA matrices using ultrafast lasers. The PLA substrates doped with graphene (Gr) and azodicarbonamide (AC) are developed for mild foaming. A picosecond laser is applied to pattern PLA micro‐foams on the PLA/Gr/AC substrates to fabricate porous/nonporous micro‐composite structures. The thermal behavior of the PLA/Gr/AC substrates is characterized to evaluate their capability in photothermal conversion and mild foaming during ultrafast laser pulses. To optimize the laser foaming process, the microstructure of the laser‐foamed PLA processed with different laser parameters is studied. It demonstrates that the oxidation of the functional groups dominates the side reactions on the PLA chains with slight variation in molecular weight during laser foaming, indicating that the PLA chains keep almost intact and mild localized foaming is realized. Furthermore, the developed technology is demonstrated for micro‐patterning and texturing, material toughness programming, and shape memory programming, showing promising applications for smart materials, metamaterials, micro‐robotics, and biological scaffolds.