KTKatherine L. Thompson

Katherine L. Thompson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Katherine L. Thompson has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Liposomal bupivacaine surgical site injection for decrease of narcotic use in hip fractures: a pilot multicenter randomized trial

    by Paul Edward Matuszewski, Jacob Jo, Arun Aneja, Amna Diwan, Mark T. Kraus, Eric S. Moghadamian, Raymond Dayne Wright, Jodi Siegel, Katherine Thompson, Eric F. Swart

    Objectives: To conduct a pilot randomized control trial evaluating the effectiveness of liposomal bupivacaine to potentially inform a larger trial for effect size and feasibility. Design: Double-Blinded Multicenter Randomized Control Trial. Setting: Level I trauma centers. Patients/Participants: Patients older than 55 years with isolated fragility hip fractures undergoing surgery. Intervention: Liposomal bupivacaine (TX) or placebo injection of saline (P). Main Outcome Measurements: Morphine milliequivalents at 24, 48, and 72 hours postoperatively. Visual analog scale pain scores, Confusion Assessment Method scores, delirium episodes, and surgical/medical complications were all used as secondary outcomes. Results: There were no statistically significant differences in the primary or secondary outcome measures at any time points. Seventy-two-hour opiate use was P: 65.4 mg (95% confidence interval 45.7–85.1) vs TX: 52.5 mg (30.2–74.7), P = 0.37. There was no significant difference in opiate use and visual analog scale scores any time point. There was no difference in Confusion Assessment Method scores or episodes of confusion/delirium nor surgical or medical complications. A 72-hour time point for data collection was not feasible, whereas 48 hours was, with 89% of data points collected. The sample size required for a superiority trial to detect a 20% difference in opioid use would require 518 patients. Conclusions: We were unable to demonstrate a clinical difference between liposomal bupivacaine and placebo in narcotic use, pain scores, or postoperative delirium in geriatric fragility fractures. It is possible that there may be a small effect size that we were unable to detect, and a larger study may demonstrate that. However, given the unlikely large improvement in pain, expense of the medication, and technique dependent nature, a smaller difference does not warrant a larger trial nor uniform administration. Level of Evidence: Level 1. Clinical Trial Registration Number: NCT03289858.

  • Open Access

    PickMe : Sample Selection for Species Tree Reconstruction using Coalescent Weighted Quartets

    by Joseph Rusinko, Yu Cai, Allison Crysler, Katherine Thompson, Julien Boutte, Mark Fishbein, Shannon C K Straub

    After collecting large datasets for phylogenomics studies, researchers must decide which genes or samples to include when reconstructing a species tree. Incomplete or unreliable datasets make the empiricist’s decision more difficult. Researchers rely on ad hoc strategies to maximize sampling while ensuring sufficient data for accurate inferences. An algorithm called PickMe formalizes the sample selection process, assuming that the samples evolved under the tree Multispecies Coalescent Model. We propose a Bayesian framework for selecting samples for species tree analysis. Given a collection of gene trees, we compute a posterior probability for each quartet, describing the likelihood that the species tree displays this topology. From this, we assign individual samples reliability scores computed as the average of a scaled version of the posterior probabilities. PickMe uses these weights to recommend which samples to include in a species tree analysis. Analysis of simulated data showed that including the samples suggested by PickMe produced species trees closer to the true species trees than both unfiltered datasets and datasets with ad hoc gene occupancy cut-offs applied. To further illustrate the efficacy of this tool, we apply PickMe to gene trees generated from target capture data from milkweeds. PickMe indicates that more samples could have reliably been included in a previous milkweed phylogenomic analysis than the researchers analyzed without access to a formal methodology for sample selection. Using simulated and empirical data, we also compare PickMe to existing sample selection methods. Inclusion of PickMe will enhance phylogenomics data analysis pipelines by providing a formal structure for sample selection


  • Open Access

    Effect of Sampling Rate, Filtering, and Torque Onset Detection on Quadriceps Rate of Torque Development and Torque Steadiness

    by McKenzie S. White, Megan C. Graham, Tereza Janatova, Gregory S. Hawk, Katherine L. Thompson, Brian Noehren

    Quadriceps rate of torque development (RTD) and torque steadiness are valuable metrics for assessing explosive strength and the ability to control force over a sustained period of time, which can inform clinical assessments of knee function. Despite their widespread use, there is a significant gap in standardized methodology for measuring these metrics, which limits their utility in comparing outcomes across different studies and populations. To address these gaps, we evaluated the influence of sampling rates, signal filtering, and torque onset detection on RTD and torque steadiness. Twenty-seven participants with a history of a primary anterior cruciate ligament reconstruction (N = 27 (11 male/16 female), age = 23 ± 8 years, body mass index = 26 ± 4 kg/m2) and thirty-two control participants (N = 32 (13 male/19 female), age = 23 ± 7 years, body mass index = 23 ± 3 kg/m2) underwent isometric quadriceps strength testing, with data collected at 2222 Hz on an isokinetic dynamometer. The torque–time signal was downsampled to approximately 100 and 1000 Hz and processed using a low-pass, zero-lag Butterworth filter with a range of cutoff frequencies spanning 10–200 Hz. The thresholds used to detect torque onset were defined as 0.1 Nm, 1 Nm, and 5 Nm. RTD between 0 and 100 ms, 0 and 200 ms, and 40–160 ms was computed, as well as absolute and relative torque steadiness. Relative differences were computed by comparing all outcomes to the “gold standard” values computed, with a sampling rate of 2222 Hz, a cutoff frequency in the low-pass filter of 150 Hz, and torque onset of 1 Nm, and compared utilizing linear mixed models. While all combinations of signal collection and processing parameters reached statistical significance (p < 0.05), these differences were consistent between injured and control limbs. Additionally, clinically relevant differences (+/−10%) were primarily observed through torque onset detection methods and primarily affected RTD between 0 and 100 ms. Although measurements of RTD and torque steadiness were generally robust against diverse signal collection and processing parameters, the selection of torque onset should be carefully considered, especially in early RTD assessments that have shorter time epochs.


  • Open Access

    Deriving the Distribution and Exploring the Utility of Partial $R^2$ in the Era of Big Data

    by Gregory S. Hawk, Katherine L. Thompson

    A central goal in the world of statistics and data science is the construction of linear regression models for continuous variables of interest. Often, our objective is to examine the impact of one or more explanatory variables, after adjusting for demographic covariates or other known/relevant factor(s). While the traditional approach is to use hypothesis testing to determine statistical significance, the p-values obtained are heavily dependent on sample size. This is particularly problematic for large datasets or “overpowered” studies, where even the tiniest of effects will appear to be highly significant. Computing capabilities and cloud-enhanced data sharing have revolutionized the way we use data worldwide, from healthcare and investments to manufacturing and retail. While machine learning and artificial intelligence are improving predictive analytics, we need better statistical inference to help understand and translate our models into meaningful and actionable insights. The coefficient of partial determination (or partial $$\varvec{R^{2}}$$ R 2 ) is widely used in applied science to supplement hypothesis testing, but little work has been done to understand its statistical properties. In this work, we derive the complete distribution of partial $$R^{2}$$ R 2 and perform simulated and real-world data analyses to show the advantages of adding it to your next analysis of Big Data.


  • Kentucky veteran and nonveteran suicide 2010–2019: A feasible solution algorithm test of perfect storm theory.

    by Donna L. Schuman, Jacqueline Seals, Arnold J. Stromberg, Gregory S. Hawk, Katherine L. Thompson, Sabrina Brown

  • Open Access

    Vitamin D status associates with skeletal muscle loss after anterior cruciate ligament reconstruction

    by Yuan Wen, Christine M. Latham, Angelique N. Moore, Nicholas T. Thomas, Brooke D. Lancaster, Kelsey A. Reeves, Alexander R. Keeble, Christopher S. Fry, Darren L. Johnson, Katherine L. Thompson, et al.

    BACKGROUND: Although 25-hydroxyvitamin D [25(OH)D] concentrations of 30 ng/mL or higher are known to reduce injury risk and boost strength, the influence on anterior cruciate ligament reconstruction (ACLR) outcomes remains unexamined. This study aimed to define the vitamin D signaling response to ACLR, assess the relationship between vitamin D status and muscle fiber cross-sectional area (CSA) and bone density outcomes, and discover vitamin D receptor (VDR) targets after ACLR. METHODS: Twenty-one young, healthy, physically active participants with recent ACL tears were enrolled (17.8 ± 3.2 years, BMI 26.0 ± 3.5 kg/m 2 ). Data were collected through blood samples, vastus lateralis biopsies, dual energy x-ray bone density measurements, and isokinetic dynamometer measures at baseline, 1 week, 4 months, and 6 months after ACLR. The biopsies facilitated CSA, Western blotting, RNA-seq, and VDR ChIP-seq analyses. RESULTS: ACLR surgery led to decreased circulating bioactive vitamin D and increased VDR and activating enzyme expression in skeletal muscle 1 week after ACLR. Participants with less than 30 ng/mL 25(OH)D levels ( n = 13) displayed more significant quadriceps fiber CSA loss 1 week and 4 months after ACLR than those with 30 ng/mL or higher ( n = 8; P < 0.01 for post hoc comparisons; P = 0.041 for time × vitamin D status interaction). RNA-seq and ChIP-seq data integration revealed genes associated with energy metabolism and skeletal muscle recovery, potentially mediating the impact of vitamin D status on ACLR recovery. No difference in bone mineral density losses between groups was observed. CONCLUSION: Correcting vitamin D status prior to ACLR may aid in preserving skeletal muscle during recovery. FUNDING: NIH grants R01AR072061, R01AR071398-04S1, and K99AR081367.


  • Open Access

    Effects of foot intensive rehabilitation (FIRE) on clinical outcomes for patients with chronic ankle instability: a randomized controlled trial protocol

    by Matthew C. Hoch, Jay Hertel, Phillip A. Gribble, Nicholas R. Heebner, Johanna M. Hoch, Kyle B. Kosik, Doug Long, Pinata H. Sessoms, Amy Silder, Danielle M. Torp, et al.

    Background: Lateral ankle sprains account for a large proportion of musculoskeletal injuries among civilians and military service members, with up to 40% of patients developing chronic ankle instability (CAI). Although foot function is compromised in patients with CAI, these impairments are not routinely addressed by current standard of care (SOC) rehabilitation protocols, potentially limiting their effectiveness. The purpose of this randomized controlled trial is to determine if a Foot Intensive REhabilitation (FIRE) protocol is more effective compared to SOC rehabilitation for patients with CAI. Methods: This study will use a three-site, single-blind, randomized controlled trial design with data collected over four data collection points (baseline and post-intervention with 6-, 12-, and 24-month follow-ups) to assess variables related to recurrent injury, sensorimotor function, and self-reported function. A total of 150 CAI patients (50 per site) will be randomly assigned to one of two rehabilitation groups (FIRE or SOC). Rehabilitation will consist of a 6-week intervention composed of supervised and home exercises. Patients assigned to SOC will complete exercises focused on ankle strengthening, balance training, and range of motion, while patients assigned to FIRE will complete a modified SOC program along with additional exercises focused on intrinsic foot muscle activation, dynamic foot stability, and plantar cutaneous stimulation. Discussion: The overall goal of this trial is to compare the effectiveness of a FIRE program versus a SOC program on near- and long-term functional outcomes in patients with CAI. We hypothesize the FIRE program will reduce the occurrence of future ankle sprains and ankle giving way episodes while creating clinically relevant improvements in sensorimotor function and self-reported disability beyond the SOC program alone. This study will also provide longitudinal outcome findings for both FIRE and SOC for up to two years. Enhancing the current SOC for CAI will improve the ability of rehabilitation to reduce subsequent ankle injuries, diminish CAI-related impairments, and improve patient-oriented measures of health, which are critical for the immediate and long-term health of civilians and service members with this condition. Trial Registration Clinicaltrials.gov Registry: NCT #NCT04493645 (7/29/20).


  • Feasibility as a mechanism for model identification and validation

    by Corrine F. Elliott, Joshua W. Lambert, Arnold J. Stromberg, Pei Wang, Ting Zeng, Katherine L. Thompson

    As new technologies permit the generation of hitherto unprecedented volumes of data (e.g. genome-wide association study data), researchers struggle to keep up with the added complexity and time commitment required for its analysis. For this reason, model selection commonly relies on machine learning and data-reduction techniques, which tend to afford models with obscure interpretations. Even in cases with straightforward explanatory variables, the so-called ‘best’ model produced by a given model-selection technique may fail to capture information of vital importance to the domain-specific questions at hand. Herein we propose a new concept for model selection, feasibility, for use in identifying multiple models that are in some sense optimal and may unite to provide a wider range of information relevant to the topic of interest, including (but not limited to) interaction terms. We further provide an R package and associated Shiny Applications for use in identifying or validating feasible models, the performance of which we demonstrate on both simulated and real-life data.