Ricardo Picón
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ricardo Picón has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- David Leonardo Nascimento de Figueiredo Amorim
Graduate Program in Civil Engineering, Federal University of Alagoas, Maceió, Brazil
4 shared publications - Jackeline Peña
Universidad Católica de Temuco, Departamento de Obras Civiles y Geología, Temuco, Chile
4 shared publications - Jesús Torres-Hoyer
Universidad Católica de Temuco (UCT)
4 shared publications - Roberto Torres-Hoyer
Universidad Católica de Temuco (UCT)
4 shared publications - Wilmer Barreto
Department of Civil Engineering and Geology, Catholic University of Temuco, Manuel Montt 056, La Araucanía, Chile
4 shared publications - Julio Flórez-López
School of Civil Engineering, Chongqing University, Chongqing, China
3 shared publications
Latest Publications
- 2 August 2026
- Published by Springer Nature
- p. 33-47
Numerical Simulation of Direct Shear Test on Vetiver Root-Reinforced Silty Sand
- 2 August 2026
- Published by Springer Nature
- p. 33-47
Numerical Simulation of Direct Shear Test on Vetiver Root-Reinforced Silty Sand
- 1 January 2025
- Published by Universidad de Los Andes, Venezuela in REVISTA GEOGRÁFICA VENEZOLANA
- Vol. 66 (2) , 455-466
Finitos para el análisis de la falla de Boconó en Mesa de Los Indios, estado Mérida, Venezuela Método de Elementos
La población de la Mesa de Los Indios, en el estado Mérida, Venezuela, está afectada por la falla de Boconó, que causa deslizamientos y daños en viviendas y vías. Un estudio geológico que incluyó análisis de campo y laboratorio permitió obtener propiedades geomecánicas, para generar simulaciones con el Método de Elementos Finitos. Por medio de los resultados se identifican zonas, calibrando el modelo y con ello las zonas de mayor amenaza, alineadas con áreas dañadas y permitiendo calcular la dirección de esfuerzos en la región y el comportamiento. Estos hallazgos facilitan la planificación de infraestructura y viviendas en zonas vulnerables, mejorando la comprensión del comportamiento geomecánico local.
- 1 January 2025
- Published by Universidad de Los Andes, Venezuela in REVISTA GEOGRÁFICA VENEZOLANA
- Vol. 66 (2) , 455-466
Finitos para el análisis de la falla de Boconó en Mesa de Los Indios, estado Mérida, Venezuela Método de Elementos
La población de la Mesa de Los Indios, en el estado Mérida, Venezuela, está afectada por la falla de Boconó, que causa deslizamientos y daños en viviendas y vías. Un estudio geológico que incluyó análisis de campo y laboratorio permitió obtener propiedades geomecánicas, para generar simulaciones con el Método de Elementos Finitos. Por medio de los resultados se identifican zonas, calibrando el modelo y con ello las zonas de mayor amenaza, alineadas con áreas dañadas y permitiendo calcular la dirección de esfuerzos en la región y el comportamiento. Estos hallazgos facilitan la planificación de infraestructura y viviendas en zonas vulnerables, mejorando la comprensión del comportamiento geomecánico local.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Seismic vulnerability of steel tubular structures based on local Buckling driving variables
Performance-Based Earthquake Engineering (PBEE) is computationally demanding, due to the multiple high-fidelity non-linear dynamic structural response analyses required to compute fragility curves. In this manuscript we propose an efficient procedure to obtain fragility curves of complex tubular structures prone to fail due to local buckling using a model based on the Lumped Damage Mechanics. A state variable characterizing local buckling is employed as engineering demand parameter in PBEE. This state variable is a scalar, derived from lumped damage mechanics and taking values between 0 and 1, which characterizes the degree of local buckling (LB). A procedure to identify and define global collapse mechanisms using the local buckling state variable at the nodes is proposed, which serves as the EDP for computing the structure's fragility curves. To evaluate the seismic vulnerability, incremental dynamic analyses are conducted. The main results demonstrate efficiency of the mechanical model in a PBEE framework, and that the internal variables indicating local buckling can be considered objective indicators of collapse for Tubular complex steel frames. Results show how to identify the global failure mechanisms that are more likely to appear for each frame.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessSeismic vulnerability of steel tubular structures based on local Buckling driving variables
Performance-Based Earthquake Engineering (PBEE) is computationally demanding, due to the multiple high-fidelity non-linear dynamic structural response analyses required to compute fragility curves. In this manuscript we propose an efficient procedure to obtain fragility curves of complex tubular structures prone to fail due to local buckling using a model based on the Lumped Damage Mechanics. A state variable characterizing local buckling is employed as engineering demand parameter in PBEE. This state variable is a scalar, derived from lumped damage mechanics and taking values between 0 and 1, which characterizes the degree of local buckling (LB). A procedure to identify and define global collapse mechanisms using the local buckling state variable at the nodes is proposed, which serves as the EDP for computing the structure's fragility curves. To evaluate the seismic vulnerability, incremental dynamic analyses are conducted. The main results demonstrate efficiency of the mechanical model in a PBEE framework, and that the internal variables indicating local buckling can be considered objective indicators of collapse for Tubular complex steel frames. Results show how to identify the global failure mechanisms that are more likely to appear for each frame.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Numerical modeling of localization bands with mesh-independence using lumped damage mechanics
The Lumped Damage Mechanics for continuous media has been successful in describing the nonlinear physical behavior of engineering problems. The approach utilizes basic concepts from fracture and classic damage mechanics. In this regard, material degradation in two-dimensional media is computed from the evolution of localization bands concentrated on the finite elements’ faces. The growth of these bands occurs based on the Griffith criterion. In this work, a nonlinear evolution law with exponential softening is adopted in order to accurately describe quasi-brittle failure behavior. Numerical solutions show mesh-independence of the proposed approach as well as the reproduction of the size-effect phenomenon. Finally, it was possible to reproduce experimental behavior in terms of equilibrium trajectory and cracking pattern of the failure region.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessNumerical modeling of localization bands with mesh-independence using lumped damage mechanics
The Lumped Damage Mechanics for continuous media has been successful in describing the nonlinear physical behavior of engineering problems. The approach utilizes basic concepts from fracture and classic damage mechanics. In this regard, material degradation in two-dimensional media is computed from the evolution of localization bands concentrated on the finite elements’ faces. The growth of these bands occurs based on the Griffith criterion. In this work, a nonlinear evolution law with exponential softening is adopted in order to accurately describe quasi-brittle failure behavior. Numerical solutions show mesh-independence of the proposed approach as well as the reproduction of the size-effect phenomenon. Finally, it was possible to reproduce experimental behavior in terms of equilibrium trajectory and cracking pattern of the failure region.
- Open Access
- 31 May 2024
- Published by Escuela Politecnica Nacional in Revista Politécnica
- Vol. 53 (2) , 37-46
Reducción del Impacto Ambiental con Desechos Industriales en Pavimentos por Análisis del California Bearing Ratio
La sub-base del pavimento requiere materiales adecuados para el soporte necesario. Tradicionalmente, se ha utilizado material de préstamo, lo que genera un impacto ambiental. Este estudio analizó el potencial de reutilizar cenizas de desecho industrial depositadas en vertederos. Se realizaron ensayos de laboratorio mezclando el suelo con diferentes proporciones de cenizas. Se determinó la relación entre humedad y peso seco del suelo, se realizó el ensayo C.B.R. (California Bearing Ratio) y se calculó el espesor de pavimentos, con un mismo espesor de sub-base. A medida que aumenta el porcentaje de cenizas, la calidad del suelo disminuye, pero sigue cumpliendo los requisitos para ser utilizado como sub-base. Se recomienda considerar las cenizas de desecho industrial como un material de reciclaje viable en la construcción de pavimentos, lo que reduciría el impacto ambiental asociado a su disposición en vertederos. The pavement sub-base requires suitable materials for the necessary support. Traditionally, borrow material has been used, this generates environmental impact. This study analyzed the potential for reusing industrial waste ashes deposited in landfills. Laboratory tests were conducted by mixing the soil with different proportions of ashes. The relationship between soil moisture and dry weight was determined, and the C.B.R. (California Bearing Ratio) test was performed. The pavement thickness was calculated, keeping the same sub-base thickness. As the percentage of ashes increased, the soil quality decreased, but it still met the requirements for use as a sub-base. It is recommended to consider industrial waste ashes as a viable recycling material in pavement construction, which would reduce the environmental impact associated with their disposal in landfills.
- 31 May 2024
- Published by Escuela Politecnica Nacional in Revista Politécnica
- Vol. 53 (2) , 37-46
Open AccessReducción del Impacto Ambiental con Desechos Industriales en Pavimentos por Análisis del California Bearing Ratio
La sub-base del pavimento requiere materiales adecuados para el soporte necesario. Tradicionalmente, se ha utilizado material de préstamo, lo que genera un impacto ambiental. Este estudio analizó el potencial de reutilizar cenizas de desecho industrial depositadas en vertederos. Se realizaron ensayos de laboratorio mezclando el suelo con diferentes proporciones de cenizas. Se determinó la relación entre humedad y peso seco del suelo, se realizó el ensayo C.B.R. (California Bearing Ratio) y se calculó el espesor de pavimentos, con un mismo espesor de sub-base. A medida que aumenta el porcentaje de cenizas, la calidad del suelo disminuye, pero sigue cumpliendo los requisitos para ser utilizado como sub-base. Se recomienda considerar las cenizas de desecho industrial como un material de reciclaje viable en la construcción de pavimentos, lo que reduciría el impacto ambiental asociado a su disposición en vertederos. The pavement sub-base requires suitable materials for the necessary support. Traditionally, borrow material has been used, this generates environmental impact. This study analyzed the potential for reusing industrial waste ashes deposited in landfills. Laboratory tests were conducted by mixing the soil with different proportions of ashes. The relationship between soil moisture and dry weight was determined, and the C.B.R. (California Bearing Ratio) test was performed. The pavement thickness was calculated, keeping the same sub-base thickness. As the percentage of ashes increased, the soil quality decreased, but it still met the requirements for use as a sub-base. It is recommended to consider industrial waste ashes as a viable recycling material in pavement construction, which would reduce the environmental impact associated with their disposal in landfills.
- 15 May 2024
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 46 (6) , 1-11
Intra-element versus inter-element crack propagation: the numerical extensometer approach
- 15 May 2024
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 46 (6) , 1-11
Intra-element versus inter-element crack propagation: the numerical extensometer approach
- Open Access
Cyclic Behavior of Hollow Section Beam–Column Moment Connection: Experimental and Numerical Study
Steel buildings with tubular columns showed a satisfactory performance during the Honshu (2011) earthquake, unlike steel buildings in the 1994 Northridge and 1995 Kobe earthquakes, where welded moment connections showed damage in their joints. In this research, a lateral joint using a hollow structural section (HSS)-beam and HSS-column subjected to cyclic displacement was performed. Three large-scale specimens were tested and a numerical model was calibrated, reaching a good adjustment. Later, several configurations of beams and columns were evaluated using finite element (FE) models from the numerical model previously calibrated. A flexural resistance higher 0.80 Mp at 0.04 [rad] was obtained for all cases studied. The ductility factor in the 3 specimens was lower than 2.5, therefore a non-ductile behavior was controlled in the connection. This aspect is very important although a 0.8 Mp at 0.04 [rad] was achieved. Finally, the typical welded moment connection can be improved using the bolted moment connection, which allows the concentration of inelastic incursion in the beam compared with the welded solution. However, a non-ductile behavior derived from local buckling in flanges of a tubular beam can affect the seismic performance.
Open AccessCyclic Behavior of Hollow Section Beam–Column Moment Connection: Experimental and Numerical Study
Steel buildings with tubular columns showed a satisfactory performance during the Honshu (2011) earthquake, unlike steel buildings in the 1994 Northridge and 1995 Kobe earthquakes, where welded moment connections showed damage in their joints. In this research, a lateral joint using a hollow structural section (HSS)-beam and HSS-column subjected to cyclic displacement was performed. Three large-scale specimens were tested and a numerical model was calibrated, reaching a good adjustment. Later, several configurations of beams and columns were evaluated using finite element (FE) models from the numerical model previously calibrated. A flexural resistance higher 0.80 Mp at 0.04 [rad] was obtained for all cases studied. The ductility factor in the 3 specimens was lower than 2.5, therefore a non-ductile behavior was controlled in the connection. This aspect is very important although a 0.8 Mp at 0.04 [rad] was achieved. Finally, the typical welded moment connection can be improved using the bolted moment connection, which allows the concentration of inelastic incursion in the beam compared with the welded solution. However, a non-ductile behavior derived from local buckling in flanges of a tubular beam can affect the seismic performance.