Yongjie Nie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yongjie Nie has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Shengtao Li
State Key Laboratory of Electrical Insulation and Power Equipment Xi'an Jiaotong University Xi'an Shaanxi China
9 shared publications - Yuanwei Zhu
State Key Laboratory of Electrical Insulation and Power Equipment Xi'an Jiaotong University Xi'an China
4 shared publications - Daomin Min
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University
3 shared publications - Guanghao Lu
Frontier Institute of Science and Technology State Key Laboratory of Electrical Insulation and Power Equipment Xi'an Jiaotong University Xi'an China
2 shared publications - Haopeng Chen
State Key Laboratory of Electrical Insulation and Power Equipment, Frontier Institute of Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
2 shared publications - Hongyu Wang
Wiscom System Co., LTD
2 shared publications
Latest Publications
- Open Access
Research on Current Sensing Coating for Power Equipment Based on Electrochromism
Current detection technologies of operation current in power systems primarily rely on electromagnetic induction principles and infrared thermal imaging. These methods suffer from inherent limitations such as dependence on external power supplies, susceptibility to interference in complex electromagnetic environments, and high equipment costs. Electrochromic materials, which can directly convert electrical signals into optical signals and enable self-sensing without external power, offer a novel technological pathway for condition monitoring of electrical equipment. However, existing electrochromic materials still face technical challenges in power equipment operating environments, including high response thresholds, poor environmental stability, and short cycle life. Based on the synergistic electrochromic effect of poly(3-hexylthiophene) (P3HT) and fluoran, this study develops a color-changing coating suitable for operating current sensing. Core–shell structured microcapsules with urea-formaldehyde resin as the wall material were prepared via in situ polymerization to effectively encapsulate the P3HT–fluoran composite core material. These microcapsules were uniformly dispersed in an epoxy acrylate/TMPTA ultraviolet-curable resin system to form a current-sensing coating with excellent adhesion and insulation properties. Test results show that the coating, applied on a busbar, undergoes a noticeable color change from red to white within 30 s when a current of 100 A passes through the busbar, with a color difference (ΔE) of 25.3. The coating exhibits adhesion strength exceeding 11.7 MPa, volume resistivity on the order of 1013 Ω·m, and a breakdown field strength higher than 85 kV/mm. After 100 cycles, ΔE remains stable, demonstrating good cyclic durability. This research provides a new visual sensing solution for high-current monitoring and shows broad application prospects in the field of power equipment operation status monitoring.
Open AccessResearch on Current Sensing Coating for Power Equipment Based on Electrochromism
Current detection technologies of operation current in power systems primarily rely on electromagnetic induction principles and infrared thermal imaging. These methods suffer from inherent limitations such as dependence on external power supplies, susceptibility to interference in complex electromagnetic environments, and high equipment costs. Electrochromic materials, which can directly convert electrical signals into optical signals and enable self-sensing without external power, offer a novel technological pathway for condition monitoring of electrical equipment. However, existing electrochromic materials still face technical challenges in power equipment operating environments, including high response thresholds, poor environmental stability, and short cycle life. Based on the synergistic electrochromic effect of poly(3-hexylthiophene) (P3HT) and fluoran, this study develops a color-changing coating suitable for operating current sensing. Core–shell structured microcapsules with urea-formaldehyde resin as the wall material were prepared via in situ polymerization to effectively encapsulate the P3HT–fluoran composite core material. These microcapsules were uniformly dispersed in an epoxy acrylate/TMPTA ultraviolet-curable resin system to form a current-sensing coating with excellent adhesion and insulation properties. Test results show that the coating, applied on a busbar, undergoes a noticeable color change from red to white within 30 s when a current of 100 A passes through the busbar, with a color difference (ΔE) of 25.3. The coating exhibits adhesion strength exceeding 11.7 MPa, volume resistivity on the order of 1013 Ω·m, and a breakdown field strength higher than 85 kV/mm. After 100 cycles, ΔE remains stable, demonstrating good cyclic durability. This research provides a new visual sensing solution for high-current monitoring and shows broad application prospects in the field of power equipment operation status monitoring.
- Open Access
Investigation on AC and DC Breakdown Mechanism of Surface-Ozone-Treated LDPE Films under Varied Thicknesses
Electrical breakdown is an important physical phenomenon in power equipment and electronic devices. Recently, the mechanism of AC and DC breakdown has been preliminarily revealed as electrode–dielectric interface breakdown and bulk breakdown, respectively, based on space charge dynamics through numerical calculations. However, the AC breakdown mechanism still lacks enough direct experimental support, which restricts further understanding and the design and development of electrical structures. Here, in this study, LDPE films with various thicknesses ranging from 33 μm to 230 μm were surface modified with ozone for different durations to experimentally investigate DC and AC breakdown mechanism. The results indicate that carbonyl groups (C=O) were introduced onto the film surface, forming shallow surface traps and leading to a decreased average trap depth and an increased trap density. Such a surface oxidation modulated trap distribution led to enhanced space charge injection and bulk electrical field distortion, which decreased DC breakdown strength as the oxidation duration went longer, in all film thicknesses. However, such decreases in breakdown strength occurred only in films below 55 μm under AC stresses, as the enhanced electrical field distortion at the electrode–dielectric interface was more obvious and dominating in thin films. These experimental results further confirm the proposed electrode–dielectric interface breakdown of dielectric films and provide new understandings of space charge modulated electrical breakdown, which fulfills dielectric breakdown theory and benefits the miniaturization of power equipment and electronic devices.
Open AccessInvestigation on AC and DC Breakdown Mechanism of Surface-Ozone-Treated LDPE Films under Varied Thicknesses
Electrical breakdown is an important physical phenomenon in power equipment and electronic devices. Recently, the mechanism of AC and DC breakdown has been preliminarily revealed as electrode–dielectric interface breakdown and bulk breakdown, respectively, based on space charge dynamics through numerical calculations. However, the AC breakdown mechanism still lacks enough direct experimental support, which restricts further understanding and the design and development of electrical structures. Here, in this study, LDPE films with various thicknesses ranging from 33 μm to 230 μm were surface modified with ozone for different durations to experimentally investigate DC and AC breakdown mechanism. The results indicate that carbonyl groups (C=O) were introduced onto the film surface, forming shallow surface traps and leading to a decreased average trap depth and an increased trap density. Such a surface oxidation modulated trap distribution led to enhanced space charge injection and bulk electrical field distortion, which decreased DC breakdown strength as the oxidation duration went longer, in all film thicknesses. However, such decreases in breakdown strength occurred only in films below 55 μm under AC stresses, as the enhanced electrical field distortion at the electrode–dielectric interface was more obvious and dominating in thin films. These experimental results further confirm the proposed electrode–dielectric interface breakdown of dielectric films and provide new understandings of space charge modulated electrical breakdown, which fulfills dielectric breakdown theory and benefits the miniaturization of power equipment and electronic devices.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Research of Power IoT System Based Air Pollutant Emission Inventory Compilation Optimization Technology
Current methods for compiling inventories of air pollutant emissions may introduce spatial and temporal uncertainty. Data on electricity consumption is a spatially and temporally precise objective evaluation of the level of activity in modern national industry and life. This study investigates and applies a definition of activity level based on energy consumption data to the production of an inventory of air pollutant emissions. In the meantime, the estimation of the ideal activity level emission coefficient is described, and a framework for the iterative update of air pollutant emission inventory compilation based on the power IoT system is proposed. From 2020 to 2022, verification experiments are being conducted using historical electricity consumption data from a Yunnan company and daily observation data from the relevant national monitoring stations. Compared to the traditional emission inventory based on coal-fired consumption data, the correlation of the reactive power-based emission inventory is increased by 58%, the Normalised Mean Bias (NMB) is reduced by 60 times, and the Normalised Mean Error (NME) is reduced by 30%, as determined by experiment results.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Research of Power IoT System Based Air Pollutant Emission Inventory Compilation Optimization Technology
Current methods for compiling inventories of air pollutant emissions may introduce spatial and temporal uncertainty. Data on electricity consumption is a spatially and temporally precise objective evaluation of the level of activity in modern national industry and life. This study investigates and applies a definition of activity level based on energy consumption data to the production of an inventory of air pollutant emissions. In the meantime, the estimation of the ideal activity level emission coefficient is described, and a framework for the iterative update of air pollutant emission inventory compilation based on the power IoT system is proposed. From 2020 to 2022, verification experiments are being conducted using historical electricity consumption data from a Yunnan company and daily observation data from the relevant national monitoring stations. Compared to the traditional emission inventory based on coal-fired consumption data, the correlation of the reactive power-based emission inventory is increased by 58%, the Normalised Mean Bias (NMB) is reduced by 60 times, and the Normalised Mean Error (NME) is reduced by 30%, as determined by experiment results.
- 24 April 2023
- Published by Springer Nature
- p. 38-46
New Intelligent Sensing Terminal System Architecture of Internet of Things
- 24 April 2023
- Published by Springer Nature
- p. 38-46
New Intelligent Sensing Terminal System Architecture of Internet of Things
- 1 January 2023
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 72 (17) , 177701
Polarization characteristics of polymer dispersed liquid crystal films and their effects on electro-optical properties
液晶含量和外加电场类型是影响聚合物分散液晶薄膜电光性能的重要因素,而对薄膜微观形貌的分析并不能直接反映电光性能的变化机理.因此本文以液晶材料E7和光聚物NOA65共混制备的聚合物分散液晶薄膜作为研究对象,通过对其极化特性的研究,揭示了在不同液晶含量和不同类型电场下极化过程对薄膜电光性能的调控规律和微观机制.结果表明,在10-1~106 Hz频率范围内,薄膜在低频、中频和高频存在三个松弛极化过程,分别为热离子极化、界面极化和转向极化.通过Arrhenius公式拟合计算了各极化过程的活化能,发现随着液晶含量的增加,转向极化的活化能从0.88 eV下降至0.83 eV,导致液晶分子转向的阈值场强和饱和场强降低.相比于交流电场,直流电场下热离子极化形成内建电场,导致阈值场强和饱和场强大幅增大,而极化弛豫时间的增加会导致响应时间的延长.此项研究对进一步分析和提升聚合物分散液晶薄膜的电光性能具有指导意义.
- 1 January 2023
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 72 (17) , 177701
Polarization characteristics of polymer dispersed liquid crystal films and their effects on electro-optical properties
液晶含量和外加电场类型是影响聚合物分散液晶薄膜电光性能的重要因素,而对薄膜微观形貌的分析并不能直接反映电光性能的变化机理.因此本文以液晶材料E7和光聚物NOA65共混制备的聚合物分散液晶薄膜作为研究对象,通过对其极化特性的研究,揭示了在不同液晶含量和不同类型电场下极化过程对薄膜电光性能的调控规律和微观机制.结果表明,在10-1~106 Hz频率范围内,薄膜在低频、中频和高频存在三个松弛极化过程,分别为热离子极化、界面极化和转向极化.通过Arrhenius公式拟合计算了各极化过程的活化能,发现随着液晶含量的增加,转向极化的活化能从0.88 eV下降至0.83 eV,导致液晶分子转向的阈值场强和饱和场强降低.相比于交流电场,直流电场下热离子极化形成内建电场,导致阈值场强和饱和场强大幅增大,而极化弛豫时间的增加会导致响应时间的延长.此项研究对进一步分析和提升聚合物分散液晶薄膜的电光性能具有指导意义.
- Open Access
- 4 November 2022
- Published by Association for Computing Machinery (ACM)
- p. 297-302
Power Consumption Forecast Based on Ridge Regression Model
- 4 November 2022
- Published by Association for Computing Machinery (ACM)
- p. 297-302
Open AccessPower Consumption Forecast Based on Ridge Regression Model
- Open Access
Surface Modification-Dominated Space-Charge Behaviors of LDPE Films: A Role of Charge Injection Barriers
Gradually increasing power transmission voltage requires an improved high-voltage capability of polymeric insulating materials. Surface modification emerges as an easily accessible approach in enhancing breakdown and flashover performances due to the widely acknowledged modification of space-charge behaviors. However, as oxidation and fluorination essentially react within a limited depth of 2 μm underneath polymer surfaces, the nature of such bulk space-charge modulation remains a controversial issue, and further investigation is needed to realize enhancement of insulating performance. In this work, the surface oxidation-dependent space-charge accumulation in LDPE film was found to be dominated by an electrode/polymer interfacial barrier, but not by the generation of bulk charge traps. Through quantitative investigation of space-charge distributions along with induced electric field distortion, the functions of surface oxidation on the interfacial barrier of a typical dielectric polymer, LDPE, is discussed and linked to space-charge behaviors. As the mechanism of surface modification on space-charge behaviors is herein proposed, space-charge accumulation can be effectively modified by selecting an appropriate surface modification method, which consequentially benefits breakdown and flashover performances of polymeric insulating films for high-voltage applications.
Open AccessSurface Modification-Dominated Space-Charge Behaviors of LDPE Films: A Role of Charge Injection Barriers
Gradually increasing power transmission voltage requires an improved high-voltage capability of polymeric insulating materials. Surface modification emerges as an easily accessible approach in enhancing breakdown and flashover performances due to the widely acknowledged modification of space-charge behaviors. However, as oxidation and fluorination essentially react within a limited depth of 2 μm underneath polymer surfaces, the nature of such bulk space-charge modulation remains a controversial issue, and further investigation is needed to realize enhancement of insulating performance. In this work, the surface oxidation-dependent space-charge accumulation in LDPE film was found to be dominated by an electrode/polymer interfacial barrier, but not by the generation of bulk charge traps. Through quantitative investigation of space-charge distributions along with induced electric field distortion, the functions of surface oxidation on the interfacial barrier of a typical dielectric polymer, LDPE, is discussed and linked to space-charge behaviors. As the mechanism of surface modification on space-charge behaviors is herein proposed, space-charge accumulation can be effectively modified by selecting an appropriate surface modification method, which consequentially benefits breakdown and flashover performances of polymeric insulating films for high-voltage applications.
- Open Access
Arc Ablation Resistance and Dielectric Strength Properties of PTFE/BN Composites
The substantial improvements in transmission voltage, which have been adopted to meet fast-growing energy demands, require more reliable power equipment and higher-quality insulating materials. The polytetrafluoroethylene (PTFE) nozzle, as the key part of a high-voltage circuit breaker, is often subjected to arc ablation and breakdown phenomena. Thus, it is very urgent to develop nozzles with better performance. In this study, PTFE/boron nitride (BN) composites were prepared. The relationships among the BN filler loading, thermal transition properties, spectral reflectance properties, arc ablation resistance, and AC dielectric breakdown performances, as well as their corresponding mechanisms, were studied. Experimental results show that the thermal conductivity and thermal diffusivity of PTFE/BN composites increased monotonously with BN loading, and that both parameters were improved by 41% and 44%, respectively, for 11 wt % composites compared with pure PTFE. Moreover, PTFE/BN composites had higher light reflectance in the wavelength range from 320 to 2500 nm. The PTFE/BN composites presented better arc ablation resistance performance with increased BN loading, which was improved by 88.5%. It is thought that the increased thermal conductivity, thermal diffusivity, the strong light reflectance, and surface sediment after arc ablation contribute to the improvement in arc ablation resistance performance. The AC breakdown strength of PTFE/BN composites was enhanced by 30.93%, attributed to the good heat dissipation properties introduced by the BN fillers. Thus, filling BN into the PTFE matrix would be helpful to solve the equipment issue that comes from the improvement in transmission voltage.
Open AccessArc Ablation Resistance and Dielectric Strength Properties of PTFE/BN Composites
The substantial improvements in transmission voltage, which have been adopted to meet fast-growing energy demands, require more reliable power equipment and higher-quality insulating materials. The polytetrafluoroethylene (PTFE) nozzle, as the key part of a high-voltage circuit breaker, is often subjected to arc ablation and breakdown phenomena. Thus, it is very urgent to develop nozzles with better performance. In this study, PTFE/boron nitride (BN) composites were prepared. The relationships among the BN filler loading, thermal transition properties, spectral reflectance properties, arc ablation resistance, and AC dielectric breakdown performances, as well as their corresponding mechanisms, were studied. Experimental results show that the thermal conductivity and thermal diffusivity of PTFE/BN composites increased monotonously with BN loading, and that both parameters were improved by 41% and 44%, respectively, for 11 wt % composites compared with pure PTFE. Moreover, PTFE/BN composites had higher light reflectance in the wavelength range from 320 to 2500 nm. The PTFE/BN composites presented better arc ablation resistance performance with increased BN loading, which was improved by 88.5%. It is thought that the increased thermal conductivity, thermal diffusivity, the strong light reflectance, and surface sediment after arc ablation contribute to the improvement in arc ablation resistance performance. The AC breakdown strength of PTFE/BN composites was enhanced by 30.93%, attributed to the good heat dissipation properties introduced by the BN fillers. Thus, filling BN into the PTFE matrix would be helpful to solve the equipment issue that comes from the improvement in transmission voltage.
- Open Access
Electrochromism of Viologen/Polymer Composite: From Gel to Insulating Bulk for High-Voltage Applications
Power equipment operates under high voltages, inducing space charge accumulation on the surface of key insulating structures, which increases the risk of discharge/breakdown and the possibility of maintenance workers experiencing electric shock accidents. Hence, a visualized non-equipment space charge detection method is of great demand in the power industry. Typical electrochromic phenomenon is based on redox of the material, triggered by a voltage smaller than 5 V with a continuous current in μA~mA level, which is not applicable to high electric fields above 106 V/m with pA~nA operation current in power equipment. Until now, no naked-eye observation technique has been realized for space charge detection to ensure the operation of power systems as well as the safety of maintenance workers. In this work, a viologen/poly(vinylidene fluoride-co-hexafluoropropylene)(P(VDF–HFP)) composite is investigated from gel to insulating bulk configurations to achieve high-voltage electrical-insulating electrochromism. The results show that viologen/P(VDF–HFP) composite bulk can withstand high electric fields at the 107 V/m level, and its electrochromism is triggered by space charges. This electrochromism phenomenon can be visually extended by increasing viologen content towards 5 wt.% and shows a positive response to voltage amplitude and application duration. As viologen/P(VDF–HFP) composite bulk exhibits a typical electrical insulating performance, it could be attached to the surface of insulating structures or clamped between metal and insulating materials as a space charge accumulation indicator in high-voltage power equipment.
Open AccessElectrochromism of Viologen/Polymer Composite: From Gel to Insulating Bulk for High-Voltage Applications
Power equipment operates under high voltages, inducing space charge accumulation on the surface of key insulating structures, which increases the risk of discharge/breakdown and the possibility of maintenance workers experiencing electric shock accidents. Hence, a visualized non-equipment space charge detection method is of great demand in the power industry. Typical electrochromic phenomenon is based on redox of the material, triggered by a voltage smaller than 5 V with a continuous current in μA~mA level, which is not applicable to high electric fields above 106 V/m with pA~nA operation current in power equipment. Until now, no naked-eye observation technique has been realized for space charge detection to ensure the operation of power systems as well as the safety of maintenance workers. In this work, a viologen/poly(vinylidene fluoride-co-hexafluoropropylene)(P(VDF–HFP)) composite is investigated from gel to insulating bulk configurations to achieve high-voltage electrical-insulating electrochromism. The results show that viologen/P(VDF–HFP) composite bulk can withstand high electric fields at the 107 V/m level, and its electrochromism is triggered by space charges. This electrochromism phenomenon can be visually extended by increasing viologen content towards 5 wt.% and shows a positive response to voltage amplitude and application duration. As viologen/P(VDF–HFP) composite bulk exhibits a typical electrical insulating performance, it could be attached to the surface of insulating structures or clamped between metal and insulating materials as a space charge accumulation indicator in high-voltage power equipment.
- 11 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Study on Insulation Performance of Thermal Aging XLPE Cables by Direct Current Integrated Charge Technique
The effect of thermal aging on the insulation performance of XLPE cables is studied using a new diagnosis technique-direct current integrated charge (DCIC-Q(t)). The influence process of thermal aging on crosslinked polyethylene (XLPE) and the measuring principle of DCIC-Q(t) were described. Several thermal aged XLPE cables were obtained for DCIC-Q(t) experiments. The dynamic charge curve of cables under different thermal aging conditions is obtained, and charge ratio $R$ is proposed to compare the charge injection and accumulation. The permittivity $\varepsilon_{r}$ and conductivity $\gamma$ of XLPE insulation are calculated to analyze the aging level of XLPE cable insulation. It can be concluded that this technique can be useful to monitor the aging of the full-sized cable and has potential to applying in other insulation system.- 11 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Study on Insulation Performance of Thermal Aging XLPE Cables by Direct Current Integrated Charge Technique
The effect of thermal aging on the insulation performance of XLPE cables is studied using a new diagnosis technique-direct current integrated charge (DCIC-Q(t)). The influence process of thermal aging on crosslinked polyethylene (XLPE) and the measuring principle of DCIC-Q(t) were described. Several thermal aged XLPE cables were obtained for DCIC-Q(t) experiments. The dynamic charge curve of cables under different thermal aging conditions is obtained, and charge ratio $R$ is proposed to compare the charge injection and accumulation. The permittivity $\varepsilon_{r}$ and conductivity $\gamma$ of XLPE insulation are calculated to analyze the aging level of XLPE cable insulation. It can be concluded that this technique can be useful to monitor the aging of the full-sized cable and has potential to applying in other insulation system.