Zeou Dou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zeou Dou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Xing Xie
School of Civil and Environmental Engineering, Georgia Institute of Technology, 311 Ferst Drive, Atlanta, Georgia 30332, United States
6 shared publications - Ting Wang
School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
4 shared publications - Wensi Chen
Texas A&M University
4 shared publications Beichen Lin
School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, USA
1 shared publicationHai Dong
Tissue Mechanics Laboratory, The Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, USA
1 shared publicationTing Wang
School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, USA
1 shared publication
Latest Publications
- Open Access
- 13 March 2023
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 3 (5) , 682-689
Chitosan–Montmorillonite–Fe Nanocomposite Hydrogel for Phosphate Recovery and Reuse
- 13 March 2023
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 3 (5) , 682-689
Open AccessChitosan–Montmorillonite–Fe Nanocomposite Hydrogel for Phosphate Recovery and Reuse
- 5 November 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (22) , 15446-15455
Microalgae Harvesting by Self-Driven 3D Microfiltration with Rationally Designed Porous Superabsorbent Polymer (PSAP) Beads
Microalgae are emerging as next-generation renewable resources for production of sustainable biofuels and high-value bioproducts. Conventional microalgae harvesting methods including centrifugation, filtration, flocculation, and flotation are limited by intensive energy consumption, high capital cost, long treatment time, or the requirement of chemical addition. In this study, we design and fabricate porous superabsorbent polymer (PSAP) beads for self-driven 3D microfiltration of microalgal cultures. The PSAP beads can swell fast in a microalgal suspension with high water absorption capacity. During this process, microalgal cells are excluded outside the beads and successfully concentrated in the residual medium. After treatment, the beads can be easily separated from the microalgal concentrate and reused after dewatering. In one PSAP treatment, a high concentration factor for microalgal cultures up to 13 times can be achieved in 30 min with a harvesting efficiency higher than 90%. Furthermore, microalgal cultures could be concentrated from 0.2 g L–1 to higher than 120 g L–1 with minimal biomass loss through multistage PSAP treatments. Therefore, the use of PSAP beads for microalgae harvesting is fast, effective, and scalable. It does not require any complex instrument or chemical addition. This technique potentially provides an efficient and feasible alternative to obtain high concentrations of functional biomass at a very low cost.
- 5 November 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (22) , 15446-15455
Microalgae Harvesting by Self-Driven 3D Microfiltration with Rationally Designed Porous Superabsorbent Polymer (PSAP) Beads
Microalgae are emerging as next-generation renewable resources for production of sustainable biofuels and high-value bioproducts. Conventional microalgae harvesting methods including centrifugation, filtration, flocculation, and flotation are limited by intensive energy consumption, high capital cost, long treatment time, or the requirement of chemical addition. In this study, we design and fabricate porous superabsorbent polymer (PSAP) beads for self-driven 3D microfiltration of microalgal cultures. The PSAP beads can swell fast in a microalgal suspension with high water absorption capacity. During this process, microalgal cells are excluded outside the beads and successfully concentrated in the residual medium. After treatment, the beads can be easily separated from the microalgal concentrate and reused after dewatering. In one PSAP treatment, a high concentration factor for microalgal cultures up to 13 times can be achieved in 30 min with a harvesting efficiency higher than 90%. Furthermore, microalgal cultures could be concentrated from 0.2 g L–1 to higher than 120 g L–1 with minimal biomass loss through multistage PSAP treatments. Therefore, the use of PSAP beads for microalgae harvesting is fast, effective, and scalable. It does not require any complex instrument or chemical addition. This technique potentially provides an efficient and feasible alternative to obtain high concentrations of functional biomass at a very low cost.
- 5 October 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (20) , 14059-14068
Self-Driven Pretreatment and Room-Temperature Storage of Water Samples for Virus Detection Using Enhanced Porous Superabsorbent Polymer Beads
The continuous emergence of infectious viral diseases has become a major threat to public health. To quantify viruses, proper handling of water samples is required to ensure the accuracy and reliability of the testing results. In this study, we develop enhanced porous superabsorbent polymer (PSAP) beads to pretreat and store water samples for virus detection. By applying PSAP beads to collect water samples, the viruses are captured and encapsulated inside the beads while undesired components are excluded. We have successfully demonstrated that the shelf life of the model virus can be effectively extended at room temperature (22 °C) and an elevated temperature (35 °C). Both the infectivity level and genome abundance of the viruses are preserved even in a complex medium such as untreated wastewater. Under the tested conditions, the viral degradation rate constant can be reduced to more than 10 times using the PSAP beads. Therefore, the enhanced PSAP beads provide a low-cost and efficient sample pretreatment and storage method that is feasible and practical for large-scale surveillance of viral pathogens in water samples.
- 5 October 2021
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 55 (20) , 14059-14068
Self-Driven Pretreatment and Room-Temperature Storage of Water Samples for Virus Detection Using Enhanced Porous Superabsorbent Polymer Beads
The continuous emergence of infectious viral diseases has become a major threat to public health. To quantify viruses, proper handling of water samples is required to ensure the accuracy and reliability of the testing results. In this study, we develop enhanced porous superabsorbent polymer (PSAP) beads to pretreat and store water samples for virus detection. By applying PSAP beads to collect water samples, the viruses are captured and encapsulated inside the beads while undesired components are excluded. We have successfully demonstrated that the shelf life of the model virus can be effectively extended at room temperature (22 °C) and an elevated temperature (35 °C). Both the infectivity level and genome abundance of the viruses are preserved even in a complex medium such as untreated wastewater. Under the tested conditions, the viral degradation rate constant can be reduced to more than 10 times using the PSAP beads. Therefore, the enhanced PSAP beads provide a low-cost and efficient sample pretreatment and storage method that is feasible and practical for large-scale surveillance of viral pathogens in water samples.
- Open Access
- 29 June 2021
- Published by Springer Nature in Research Square
Self-Driven Pretreatment and Room-Temperature Storage of Water Samples for Virus Detection Using Enhanced Porous Superabsorbent Polymer (PSAP) Beads
The continuous emergence of infectious viral diseases has become a major threat to public health. To quantify viruses, proper handling of water samples is required to ensure the accuracy and reliability of the testing results. In this study, we develop enhanced porous superabsorbent polymer (PSAP) beads to pretreat and store water samples for virus detection. By applying PSAP beads to collect water samples, the viruses are captured and encapsulated inside the beads while undesired components are excluded. We have successfully demonstrated that the shelf life of the model virus can be effectively extended at room temperature (22°C) and elevated temperature (35°C). Both the infectivity level and genome abundance of the viruses are protected even in a complex medium like untreated wastewater. Under the tested conditions, the viral degradation rate constant can be reduced to more than 10 times using the PSAP beads. Therefore, the enhanced PSAP beads provide a low-cost and efficient sample pretreatment and storage method that is feasible and practicable for large-scale surveillance of viral pathogens in water samples.
- 29 June 2021
- Published by Springer Nature in Research Square
Open AccessSelf-Driven Pretreatment and Room-Temperature Storage of Water Samples for Virus Detection Using Enhanced Porous Superabsorbent Polymer (PSAP) Beads
The continuous emergence of infectious viral diseases has become a major threat to public health. To quantify viruses, proper handling of water samples is required to ensure the accuracy and reliability of the testing results. In this study, we develop enhanced porous superabsorbent polymer (PSAP) beads to pretreat and store water samples for virus detection. By applying PSAP beads to collect water samples, the viruses are captured and encapsulated inside the beads while undesired components are excluded. We have successfully demonstrated that the shelf life of the model virus can be effectively extended at room temperature (22°C) and elevated temperature (35°C). Both the infectivity level and genome abundance of the viruses are protected even in a complex medium like untreated wastewater. Under the tested conditions, the viral degradation rate constant can be reduced to more than 10 times using the PSAP beads. Therefore, the enhanced PSAP beads provide a low-cost and efficient sample pretreatment and storage method that is feasible and practicable for large-scale surveillance of viral pathogens in water samples.
- Open Access
- 21 October 2020
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 2 (11) , 1545-1554
Self-Driven “Microfiltration” Enabled by Porous Superabsorbent Polymer (PSAP) Beads for Biofluid Specimen Processing and Storage
A remote collection of biofluid specimens such as blood and urine remains a great challenge due to the requirement of continuous refrigeration. Without proper temperature regulation, the rapid degradation of analytical targets in the specimen may compromise the accuracy and reliability of the testing results. In this study, we develop porous superabsorbent polymer (PSAP) beads for fast and self-driven “microfiltration” of biofluid samples. This treatment effectively separates small analytical targets (e.g., glucose, catalase, and bacteriophage) and large undesired components (e.g., bacteria and blood cells) in the biofluids by capturing the former inside and excluding the latter outside the PSAP beads. We have successfully demonstrated that this treatment can reduce sample volume, self-aliquot the liquid sample, avoid microbial contamination, separate plasma from blood cells, stabilize target species inside the beads, and enable long-term storage at room temperature. Potential practical applications of this technology can provide an alternative sample collection and storage approach for medically underserved areas.
- 21 October 2020
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 2 (11) , 1545-1554
Open AccessSelf-Driven “Microfiltration” Enabled by Porous Superabsorbent Polymer (PSAP) Beads for Biofluid Specimen Processing and Storage
A remote collection of biofluid specimens such as blood and urine remains a great challenge due to the requirement of continuous refrigeration. Without proper temperature regulation, the rapid degradation of analytical targets in the specimen may compromise the accuracy and reliability of the testing results. In this study, we develop porous superabsorbent polymer (PSAP) beads for fast and self-driven “microfiltration” of biofluid samples. This treatment effectively separates small analytical targets (e.g., glucose, catalase, and bacteriophage) and large undesired components (e.g., bacteria and blood cells) in the biofluids by capturing the former inside and excluding the latter outside the PSAP beads. We have successfully demonstrated that this treatment can reduce sample volume, self-aliquot the liquid sample, avoid microbial contamination, separate plasma from blood cells, stabilize target species inside the beads, and enable long-term storage at room temperature. Potential practical applications of this technology can provide an alternative sample collection and storage approach for medically underserved areas.
- 1 June 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (31) , 15942-15950
Self-driven membrane filtration by core–shell polymer composites
A self-driven filtration process based on dynamic core–shell hydrogel absorbers of both high water absorbency and selectivity.
- 1 June 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (31) , 15942-15950
Self-driven membrane filtration by core–shell polymer composites
A self-driven filtration process based on dynamic core–shell hydrogel absorbers of both high water absorbency and selectivity.