Yogesh S. Tingare
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yogesh S. Tingare has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Wen-Ren Li
National Central University
16 shared publications - Chaochin Su
Institute of Organic and Polymeric Materials/Research and Development Center for Smart Textile Technology National Taipei University of Technology Taipei 106344 Taiwan
14 shared publications - Ja-Hon Lin
National Taipei University of Technology
6 shared publications - Wanyi Nie
Department of Physics, SUNY University at Buffalo, Buffalo, USA
4 shared publications - Chen-Yu Yeh
Department of Chemistry i‐Center for Advanced Science and Technology (i‐CAST) and Innovation and Development Center of Sustainable Agriculture (IDCSA) National Chung Hsing University Taichung 402202 Taiwan
3 shared publications Chien-Hsiang Lin
Department of Chemistry, National Central University, Chung-Li 32001, Taiwan
3 shared publications
Latest Publications
- Open Access
Acceptor Engineered Hole‐Transporting Materials for Inverted Perovskite Solar Cells
Hole‐transporting materials (HTMs) with appropriate energy‐level alignment and defect‐passivation capabilities play a key role in achieving highly efficient and stable perovskite solar cells (PSCs). In this study, two dopant‐free dipolar HTMs, BA and RDN , incorporating barbituric acid and thioxothiazolidin acceptors, respectively, were developed to examine the influence of acceptor engineering on PSC performance. Although both HTMs share the same donor framework, the differing acceptor units provide distinct interfacial properties and charge‐carrier dynamics. The barbituric acid acceptor in BA enables stronger defect passivation due to its carbonyl and ─NH groups‐rich structure, which suppresses nonradiative recombination while maintaining favorable energy‐level alignment and efficient hole transport. As a result, PSCs utilizing BA achieve a higher power conversion efficiency of 19.94% with a short‐circuit current density of 23.09 mA cm −2 , surpassing the performance of RDN ‐based devices (18.75%). These results illustrate the importance of acceptor selection toward modulating interfacial energetics along with defect passivation and highlight barbituric acid as a promising acceptor candidate for the design of high‐performance dopant‐free HTMs for PSCs.
Open AccessAcceptor Engineered Hole‐Transporting Materials for Inverted Perovskite Solar Cells
Hole‐transporting materials (HTMs) with appropriate energy‐level alignment and defect‐passivation capabilities play a key role in achieving highly efficient and stable perovskite solar cells (PSCs). In this study, two dopant‐free dipolar HTMs, BA and RDN , incorporating barbituric acid and thioxothiazolidin acceptors, respectively, were developed to examine the influence of acceptor engineering on PSC performance. Although both HTMs share the same donor framework, the differing acceptor units provide distinct interfacial properties and charge‐carrier dynamics. The barbituric acid acceptor in BA enables stronger defect passivation due to its carbonyl and ─NH groups‐rich structure, which suppresses nonradiative recombination while maintaining favorable energy‐level alignment and efficient hole transport. As a result, PSCs utilizing BA achieve a higher power conversion efficiency of 19.94% with a short‐circuit current density of 23.09 mA cm −2 , surpassing the performance of RDN ‐based devices (18.75%). These results illustrate the importance of acceptor selection toward modulating interfacial energetics along with defect passivation and highlight barbituric acid as a promising acceptor candidate for the design of high‐performance dopant‐free HTMs for PSCs.
- Open Access
- 4 June 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (11) , e70757
Bidentate Hole‐Transporting Materials for Interface Passivation and High‐Efficiency Inverted Perovskite Solar Cells
Interface engineering using multifunctional materials is central to advancing both efficiency and operational stability in perovskite solar cells (PSCs). Here, we report a family of enol‐centered small‐molecule hole‐transporting materials (HTMs) DKcH , DKPh , and DKTPA rationally designed to couple efficient hole extraction with intrinsic interfacial defect passivation. The cooperative C═O and ‒OH moieties act as bidentate coordination sites, enabling strong chemical interactions with undercoordinated species at the perovskite surface. Systematic modulation of the secondary side arm from cyclohexyl to phenyl and triphenylamine progressively increases molecular conjugation, strengthens π‐π stacking, and improves film cohesion and thermal robustness, establishing clear structure‐property‐function relationships. Benefiting from optimized electronic structure and interfacial functionality, DKTPA delivers superior device performance, enabling inverted MAPb(I 0.9 C 0.1 ) 3 ‐based PSCs to achieve a high‐power conversion efficiency of 22.74%. Notably, DKTPA ‐based devices retain 90.35% of their initial efficiency after 500 h of continuous one‐sun illumination. This work introduces enol‐centered HTMs as a versatile functional‐materials platform and provides general molecular design principles for stable, dopant‐free interfacial layers in high‐performance perovskite photovoltaics.
- 4 June 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (11) , e70757
Open AccessBidentate Hole‐Transporting Materials for Interface Passivation and High‐Efficiency Inverted Perovskite Solar Cells
Interface engineering using multifunctional materials is central to advancing both efficiency and operational stability in perovskite solar cells (PSCs). Here, we report a family of enol‐centered small‐molecule hole‐transporting materials (HTMs) DKcH , DKPh , and DKTPA rationally designed to couple efficient hole extraction with intrinsic interfacial defect passivation. The cooperative C═O and ‒OH moieties act as bidentate coordination sites, enabling strong chemical interactions with undercoordinated species at the perovskite surface. Systematic modulation of the secondary side arm from cyclohexyl to phenyl and triphenylamine progressively increases molecular conjugation, strengthens π‐π stacking, and improves film cohesion and thermal robustness, establishing clear structure‐property‐function relationships. Benefiting from optimized electronic structure and interfacial functionality, DKTPA delivers superior device performance, enabling inverted MAPb(I 0.9 C 0.1 ) 3 ‐based PSCs to achieve a high‐power conversion efficiency of 22.74%. Notably, DKTPA ‐based devices retain 90.35% of their initial efficiency after 500 h of continuous one‐sun illumination. This work introduces enol‐centered HTMs as a versatile functional‐materials platform and provides general molecular design principles for stable, dopant‐free interfacial layers in high‐performance perovskite photovoltaics.
- Open Access
- 19 June 2025
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 27 (26) , 6983-6988
Sulfur-Rich Hole-Transporting Materials for Inverted Perovskite Solar Cells
We introduce an electron-rich hole-transporting material (HTM), WZ103, based on a sulfur-rich terthiophene core. This HTM features two triphenylamine donor groups at the 4,4″ positions and four additional triphenylamine groups at the 5,5″ positions connected by vinylene linkages. Its good hole-transporting properties, reduced series resistance, and effective defect passivation contribute to the improved performance. With a remarkable power conversion efficiency of 19.48%, this HTM ranks among the top nonfused terthiophene-based, dopant-free HTMs.
- 19 June 2025
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 27 (26) , 6983-6988
Open AccessSulfur-Rich Hole-Transporting Materials for Inverted Perovskite Solar Cells
We introduce an electron-rich hole-transporting material (HTM), WZ103, based on a sulfur-rich terthiophene core. This HTM features two triphenylamine donor groups at the 4,4″ positions and four additional triphenylamine groups at the 5,5″ positions connected by vinylene linkages. Its good hole-transporting properties, reduced series resistance, and effective defect passivation contribute to the improved performance. With a remarkable power conversion efficiency of 19.48%, this HTM ranks among the top nonfused terthiophene-based, dopant-free HTMs.
- 19 May 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13) , e202500266
Terthiophene‐Based Dopant‐Free Hole‐Transporting Materials for Inverted Perovskite Solar Cells
The interfaces of perovskite solar cells are essential for high power conversion efficiency and long‐term stability. This study showcases two innovative materials, WZ40 and WZ102, triarylamine end‐capped functionalized terthiophene derivatives. These materials serve as hole‐transporting materials (HTMs), enabling the production of efficient mixed‐halide inverted perovskite solar cells. Both HTMs exhibit impressive thermal stability with decomposition temperatures over 415 °C, making them suitable for developing stable perovskite solar cells. Their sulfur‐rich terthiophene core enhances perovskite stability through Pb–S interactions, promoting uniform crystal growth. By adjusting the electron density in WZ40 and WZ102 through donor and acceptor group modifications, energy level alignment at the HTM/perovskite interface is optimized, facilitating efficient hole transfer. The donor‐rich WZ102‐based solar cell achieves an outstanding open‐circuit voltage of 1.09 V and a power conversion efficiency of close to 20%, thanks to effective hole transport and low series resistance. This work introduces a promising class of terthiophene‐based small molecules as HTMs, paving the way for dopant‐free interface materials and advancing the commercialization of perovskite solar cells.
- 19 May 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (13) , e202500266
Terthiophene‐Based Dopant‐Free Hole‐Transporting Materials for Inverted Perovskite Solar Cells
The interfaces of perovskite solar cells are essential for high power conversion efficiency and long‐term stability. This study showcases two innovative materials, WZ40 and WZ102, triarylamine end‐capped functionalized terthiophene derivatives. These materials serve as hole‐transporting materials (HTMs), enabling the production of efficient mixed‐halide inverted perovskite solar cells. Both HTMs exhibit impressive thermal stability with decomposition temperatures over 415 °C, making them suitable for developing stable perovskite solar cells. Their sulfur‐rich terthiophene core enhances perovskite stability through Pb–S interactions, promoting uniform crystal growth. By adjusting the electron density in WZ40 and WZ102 through donor and acceptor group modifications, energy level alignment at the HTM/perovskite interface is optimized, facilitating efficient hole transfer. The donor‐rich WZ102‐based solar cell achieves an outstanding open‐circuit voltage of 1.09 V and a power conversion efficiency of close to 20%, thanks to effective hole transport and low series resistance. This work introduces a promising class of terthiophene‐based small molecules as HTMs, paving the way for dopant‐free interface materials and advancing the commercialization of perovskite solar cells.
- 14 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (47) , 19163-19169
Thienoimidazole-pyridine based small molecule hole transport materials for dopant-free, efficient inverted perovskite solar cells
Small-molecule hole-transporting materials (HTMs) containing heteroatoms provide enhanced interface contact and complete passivation effects, which increase the performance of perovskite solar cells (PSC). In this study, we present the synthesis and analysis of two small molecule HTMs, CYH20 and CYH23, based on a novel thienoimidazole-pyridine acceptor core for dopant-free and efficient inverted (p–i–n) PSCs. The two HTMs are structurally similar, except for the end units, 4-(1-cyanovinyl)benzonitrile (acceptor) and 2,2-bis(4-methoxyphenyl)vinyl (donor) moieties. As a result, CYH20 is classed as a donor–acceptor–acceptor (D–A–A) HTM and CYH23 as a donor–acceptor–donor (D–A–D) HTM. These new HTMs have favorable optoelectronic and thermal properties and suitable morphologies, as demonstrated by scanning electron microscopy, photoluminescence (PL) time-resolved PL, and space charge limited current studies. Among both, the D–A–D configured HTM CYH23-based PSC has a high open-circuit voltage of 1.08 V and a high short circuit current density of 21.78 mA cm−2, resulting in the highest power conversion efficiency of 18.77%. The superior performance of CYH23 over CYH20 (17.14%) is attributed to its excellent morphology and charge transfer properties.
- 14 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (47) , 19163-19169
Thienoimidazole-pyridine based small molecule hole transport materials for dopant-free, efficient inverted perovskite solar cells
Small-molecule hole-transporting materials (HTMs) containing heteroatoms provide enhanced interface contact and complete passivation effects, which increase the performance of perovskite solar cells (PSC). In this study, we present the synthesis and analysis of two small molecule HTMs, CYH20 and CYH23, based on a novel thienoimidazole-pyridine acceptor core for dopant-free and efficient inverted (p–i–n) PSCs. The two HTMs are structurally similar, except for the end units, 4-(1-cyanovinyl)benzonitrile (acceptor) and 2,2-bis(4-methoxyphenyl)vinyl (donor) moieties. As a result, CYH20 is classed as a donor–acceptor–acceptor (D–A–A) HTM and CYH23 as a donor–acceptor–donor (D–A–D) HTM. These new HTMs have favorable optoelectronic and thermal properties and suitable morphologies, as demonstrated by scanning electron microscopy, photoluminescence (PL) time-resolved PL, and space charge limited current studies. Among both, the D–A–D configured HTM CYH23-based PSC has a high open-circuit voltage of 1.08 V and a high short circuit current density of 21.78 mA cm−2, resulting in the highest power conversion efficiency of 18.77%. The superior performance of CYH23 over CYH20 (17.14%) is attributed to its excellent morphology and charge transfer properties.
- 14 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (27) , 10145-10151
Zinc complex-based hole transporting material for perovskite solar cell applications
Developing hole-transport materials (HTMs) with high hole mobility is critical for constructing efficient perovskite solar cells (PSCs). We present a design strategy for improving hole mobility and PSC performance using a stable zinc complex-based HTM BPZ23. Compared to its non-metal counterpart (BP21), the BPZ23 demonstrated a 59.42% increase in hole mobility, resulting in a good perovskite layer with reduced trap-assisted recombination. As a result, the power conversion efficiency of the fabricated inverted PSC using BPZ23 is up to 19.75%, which is one of the highest reported for any transition metal complex-based HTM employed in inverted PSC. This research demonstrates a simple and efficient method for increasing hole mobility in HTMs and improving the photovoltaic performance of PSCs.
- 14 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (27) , 10145-10151
Zinc complex-based hole transporting material for perovskite solar cell applications
Developing hole-transport materials (HTMs) with high hole mobility is critical for constructing efficient perovskite solar cells (PSCs). We present a design strategy for improving hole mobility and PSC performance using a stable zinc complex-based HTM BPZ23. Compared to its non-metal counterpart (BP21), the BPZ23 demonstrated a 59.42% increase in hole mobility, resulting in a good perovskite layer with reduced trap-assisted recombination. As a result, the power conversion efficiency of the fabricated inverted PSC using BPZ23 is up to 19.75%, which is one of the highest reported for any transition metal complex-based HTM employed in inverted PSC. This research demonstrates a simple and efficient method for increasing hole mobility in HTMs and improving the photovoltaic performance of PSCs.
- 12 February 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (10) , e202301508
Organic‐inorganic hybrid material for hole transport in inverted perovskite solar cells
Hole mobility is critical to the power conversion efficiencies of perovskite solar cells (PSCs). Organic small‐molecule hole‐transporting materials (HTMs) have attracted considerable interest in PSCs due to their structural flexibility and operational durability, but they suffer from modest hole mobility. On the other hand, inorganic HTMs with good hole mobility are inflexible in structural variation and exhibit unsatisfactory cell efficiency. In this study, a ligand BT28 and its zinc‐based coordination complex BTZ30 were synthesized, characterized, and investigated as HTMs for PSC applications. The mixed‐halide perovskites can be grown uniformly with large crystalline grains on both HTMs, which exhibit similar optical and electrochemical properties. However, it was discovered that the BTZ30‐based solar cell exhibited an open‐circuit voltage of 1.0817 V and a high short‐circuit current density of 23.1392 mA cm−2 with a champion power conversion efficiency of close to 20 %. The performance difference between the two HTMs can be attributed to the difference in their hole mobilities, which is 63.31 % higher for BTZ30 than BT28. The comparison of non‐metal and metal HTMs revealed the importance of considering hybrid structures to overcome some shortcomings associated with organic and inorganic HTMs and achieve high‐performance PSCs.
- 12 February 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (10) , e202301508
Organic‐inorganic hybrid material for hole transport in inverted perovskite solar cells
Hole mobility is critical to the power conversion efficiencies of perovskite solar cells (PSCs). Organic small‐molecule hole‐transporting materials (HTMs) have attracted considerable interest in PSCs due to their structural flexibility and operational durability, but they suffer from modest hole mobility. On the other hand, inorganic HTMs with good hole mobility are inflexible in structural variation and exhibit unsatisfactory cell efficiency. In this study, a ligand BT28 and its zinc‐based coordination complex BTZ30 were synthesized, characterized, and investigated as HTMs for PSC applications. The mixed‐halide perovskites can be grown uniformly with large crystalline grains on both HTMs, which exhibit similar optical and electrochemical properties. However, it was discovered that the BTZ30‐based solar cell exhibited an open‐circuit voltage of 1.0817 V and a high short‐circuit current density of 23.1392 mA cm−2 with a champion power conversion efficiency of close to 20 %. The performance difference between the two HTMs can be attributed to the difference in their hole mobilities, which is 63.31 % higher for BTZ30 than BT28. The comparison of non‐metal and metal HTMs revealed the importance of considering hybrid structures to overcome some shortcomings associated with organic and inorganic HTMs and achieve high‐performance PSCs.
Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells
The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.
Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells
The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.
- 18 December 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (4) , 2140-2150
Ionization of hole-transporting materials as a method for improving the photovoltaic performance of perovskite solar cells
In the operating mechanisms of perovskite solar cells, hole-transporting materials (HTMs) facilitate directional charge transfer and electron blocking. In addition, HTMs are also important in forming the perovskite layers for inverted perovskite solar cells, improving device efficiency. We present a method for increasing efficiency by ionizing HTMs, introducing defect-passivating abilities, improved interfacial properties, and ideal surface topographies. Compared to their non-ionized counterpart, the ionic HTMs have well-matched energy levels and smooth perovskite layers, resulting in higher short-circuit current densities. These experimental findings are corroborated by atomistic first principle electronic structure calculations of model perovskite systems. Furthermore, we conducted a comparative study of different ionizing counter anions for HTMs. The iodide-based ionic HTM, PMO-I, has a maximum efficiency of 20.46%, 1.71% higher than that of the non-ionic HTM, PMO (18.75%).
- 18 December 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (4) , 2140-2150
Ionization of hole-transporting materials as a method for improving the photovoltaic performance of perovskite solar cells
In the operating mechanisms of perovskite solar cells, hole-transporting materials (HTMs) facilitate directional charge transfer and electron blocking. In addition, HTMs are also important in forming the perovskite layers for inverted perovskite solar cells, improving device efficiency. We present a method for increasing efficiency by ionizing HTMs, introducing defect-passivating abilities, improved interfacial properties, and ideal surface topographies. Compared to their non-ionized counterpart, the ionic HTMs have well-matched energy levels and smooth perovskite layers, resulting in higher short-circuit current densities. These experimental findings are corroborated by atomistic first principle electronic structure calculations of model perovskite systems. Furthermore, we conducted a comparative study of different ionizing counter anions for HTMs. The iodide-based ionic HTM, PMO-I, has a maximum efficiency of 20.46%, 1.71% higher than that of the non-ionic HTM, PMO (18.75%).
- 22 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (26) , 31675-31683
Heterocyclic Functionalized Donor–Acceptor Hole-Transporting Materials for Inverted Perovskite Solar Cells
Hole transport materials (HTMs) with appropriate energy levels and comprehensive passivation effects help to obtain highly efficient and stable perovskite solar cells (PSCs). Electron-deficient character-induced HTMs can generate varying energy level alignments near the HTM/perovskite interface. Herein, we report the synthesis and investigation of two new dipolar HTMs, WWC103 and WWC105, based on 2-(1,1-dicyanomethylene)rhodamine and 4-cynophenylacetonitrile acceptors, enabling high-efficiency mixed-cation mixed-halide perovskite solar cells. Apart from having different acceptors, these HTMs are built on a heterocyclic frame, which can provide passivation effects and improve the morphology of the perovskite layer. As a result, these dopant-free HTM-based solar cells show a high open-circuit voltage and good power conversion efficiency. Among both, the solar cell based on the HTM with 2-(1,1-dicyanomethylene)rhodamine exhibits a high open-circuit voltage of 1.09 V with a champion power conversion efficiency of over 20.51%. The improved performance of WWC103 over WWC105 (19.74%) is attributed to the new acceptor, which, in addition to providing good energy-level alignments and hole mobility, also holds the ability to passivate the defects. The findings suggest a new acceptor unit for constructing dopant-free HTMs for efficient PSCs.
- 22 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (26) , 31675-31683
Heterocyclic Functionalized Donor–Acceptor Hole-Transporting Materials for Inverted Perovskite Solar Cells
Hole transport materials (HTMs) with appropriate energy levels and comprehensive passivation effects help to obtain highly efficient and stable perovskite solar cells (PSCs). Electron-deficient character-induced HTMs can generate varying energy level alignments near the HTM/perovskite interface. Herein, we report the synthesis and investigation of two new dipolar HTMs, WWC103 and WWC105, based on 2-(1,1-dicyanomethylene)rhodamine and 4-cynophenylacetonitrile acceptors, enabling high-efficiency mixed-cation mixed-halide perovskite solar cells. Apart from having different acceptors, these HTMs are built on a heterocyclic frame, which can provide passivation effects and improve the morphology of the perovskite layer. As a result, these dopant-free HTM-based solar cells show a high open-circuit voltage and good power conversion efficiency. Among both, the solar cell based on the HTM with 2-(1,1-dicyanomethylene)rhodamine exhibits a high open-circuit voltage of 1.09 V with a champion power conversion efficiency of over 20.51%. The improved performance of WWC103 over WWC105 (19.74%) is attributed to the new acceptor, which, in addition to providing good energy-level alignments and hole mobility, also holds the ability to passivate the defects. The findings suggest a new acceptor unit for constructing dopant-free HTMs for efficient PSCs.