David Ruiz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David Ruiz has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Alberto Donoso
Departamento de Matemáticas, ETSII, Universidad de Castilla - La Mancha, Ciudad Real, Spain
14 shared publications - Jose Carlos Bellido
ETSI Industrial Departamento de Matemáticas Universidad de Castilla-La Mancha Campus Universitario s/n 13071- Ciudad Real SPAIN
12 shared publications - Jose Luis Sanchez-Rojas
Microsystems, Actuators and Sensors Group, University of Castilla-La Mancha, Ciudad Real, Spain, Spain
6 shared publications - Sergio Horta Muñoz
Instituto de Investigación Aplicada a la Industria Aeronáutica, Escuela de Ingeniería Industrial y Aeroespacial de Toledo, Universidad de Castilla-La Mancha, Av. Carlos III, Campus Fábrica de Armas, 45004 Toledo, Spain
6 shared publications - Alex Díaz-Molina
Microsystems, Actuators and Sensors Group, Universidad de Castilla-La Mancha, E-13071 Ciudad Real, Spain
3 shared publications - Ole Sigmund
Department of Civil and Mechanical Engineering, Solid Mechanics, Technical University of Denmark, Lyngby, Denmark
3 shared publications
Latest Publications
- 20 December 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 68 (1) , 1-7
On how to avoid the formation of hinges in compliant mechanisms using connectivity constraints
- 20 December 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 68 (1) , 1-7
On how to avoid the formation of hinges in compliant mechanisms using connectivity constraints
- Open Access
- 23 July 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (15) , 2305
Solving Mazes: A New Approach Based on Spectral Graph Theory
The use of graph theory for solving labyrinths and mazes is well known, understanding the possible paths as the connections between the nodes that represent the corners or bifurcations. This work presents a new idea: minimizing the length of the optimal path formulated as a topology optimization problem. The maze is mapped with finite elements, and then, through the eigenvalues of the Laplacian matrix of the graph, a constraint is imposed over the connectivity between the input and the output. Several 2D examples are provided to support this approach, allowing for unequivocally finding the shortest path in mazes with multiple connections between entrance and exit, resulting in an nonheuristic algorithm.
- 23 July 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (15) , 2305
Open AccessSolving Mazes: A New Approach Based on Spectral Graph Theory
The use of graph theory for solving labyrinths and mazes is well known, understanding the possible paths as the connections between the nodes that represent the corners or bifurcations. This work presents a new idea: minimizing the length of the optimal path formulated as a topology optimization problem. The maze is mapped with finite elements, and then, through the eigenvalues of the Laplacian matrix of the graph, a constraint is imposed over the connectivity between the input and the output. Several 2D examples are provided to support this approach, allowing for unequivocally finding the shortest path in mazes with multiple connections between entrance and exit, resulting in an nonheuristic algorithm.
- Open Access
- 14 May 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (10) , 1525
Simplification of Electrode Profiles for Piezoelectric Modal Sensors by Controlling Gap-Phase Length
This paper presents a method to optimize and simplify the electrode profile of a piezoelectric modal sensor. At the same time that the electrode profile is optimized to maximize the charge, a null-polarity phase is introduced. This gap-phase is modeled using the normalized norm of the spatial gradient of the polarity profile along with a two-step filtering and projection technique. High-order vibration modes generate a complex polarization profile that makes the manufacturing process difficult. The novelty of the proposed method is the addition of a constraint on the length of the interface in the topology optimization problem. This constraint simplifies the optimal designs and facilitates the fabrication process. Several examples show the simplified electrode profile that maximizes the electrical charge produced by a vibration mode, while reducing the number of different polarization regions by means of the gap-length constraint.
- 14 May 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (10) , 1525
Open AccessSimplification of Electrode Profiles for Piezoelectric Modal Sensors by Controlling Gap-Phase Length
This paper presents a method to optimize and simplify the electrode profile of a piezoelectric modal sensor. At the same time that the electrode profile is optimized to maximize the charge, a null-polarity phase is introduced. This gap-phase is modeled using the normalized norm of the spatial gradient of the polarity profile along with a two-step filtering and projection technique. High-order vibration modes generate a complex polarization profile that makes the manufacturing process difficult. The novelty of the proposed method is the addition of a constraint on the length of the interface in the topology optimization problem. This constraint simplifies the optimal designs and facilitates the fabrication process. Several examples show the simplified electrode profile that maximizes the electrical charge produced by a vibration mode, while reducing the number of different polarization regions by means of the gap-length constraint.
- Open Access
Optimization of the Polarization Profile of Conical-Shaped Shells Piezoelectric Sensors
Conical shell structures are frequently submitted to severe static and dynamic mechanical loads that can result in situations that affect the service of the systems that are part of, or even cause catastrophic failures. For this reason, a common solution is to design an active deformation control system, usually using piezoelectric patches strategically distributed along the surface of the shell structure. Moreover, these elements may be part of an energy recovery system. This paper details the methodology to topologically optimize the placement of piezoelectric elements through a characteristic function, analysing static and free vibration loading cases by means of the finite element method. Then, the optimal arrangement of the electrode with different polarization profiles is distributed throughout the entire structure. The nature of the loading cases studied corresponds to a general situation where static loads and dynamics vibration are considered. The objective function of the problem only depends linearly on the displacement fields, and therefore, the optimal electrode profile can be obtained for any combination of loads. As a consequence, this technique allows for maximising the electric charge obtained, which results in a greater capacity for monitoring, actuation and/or energy harvesting.
Open AccessOptimization of the Polarization Profile of Conical-Shaped Shells Piezoelectric Sensors
Conical shell structures are frequently submitted to severe static and dynamic mechanical loads that can result in situations that affect the service of the systems that are part of, or even cause catastrophic failures. For this reason, a common solution is to design an active deformation control system, usually using piezoelectric patches strategically distributed along the surface of the shell structure. Moreover, these elements may be part of an energy recovery system. This paper details the methodology to topologically optimize the placement of piezoelectric elements through a characteristic function, analysing static and free vibration loading cases by means of the finite element method. Then, the optimal arrangement of the electrode with different polarization profiles is distributed throughout the entire structure. The nature of the loading cases studied corresponds to a general situation where static loads and dynamics vibration are considered. The objective function of the problem only depends linearly on the displacement fields, and therefore, the optimal electrode profile can be obtained for any combination of loads. As a consequence, this technique allows for maximising the electric charge obtained, which results in a greater capacity for monitoring, actuation and/or energy harvesting.
- Open Access
- 3 August 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (15) , 2753
Simultaneous Design of the Host Structure and the Polarisation Profile of Piezoelectric Sensors Applied to Cylindrical Shell Structures
Piezoelectric actuators and sensors are applied in many fields in order to produce forces or displacements with the aim of sensing, manipulating or measurement, among other functions. This study presents the numerical methodology to optimize the static response of a thick-shell structure consisting of piezoelectric sensors, based on the maximisation of the electric charge while controlling the amount of piezoelectric and material required. Two characteristic functions are involved, determining the topology of the sensor and the polarisation profile. Constraints over the reaction force are included in the optimisation problem in order to avoid singularities. The topology optimisation method is used to obtain the optimal results, where regularisation techniques (density filtering and projection) are used to avoid hinges. The minimum length scale can be controlled by the use of three different projections. As the main novelty, a displacement-controlled scheme is proposed in order to generate a robust algorithm for future studies including non-linearities.
- 3 August 2022
- Published by MDPI AG in Mathematics
- Vol. 10 (15) , 2753
Open AccessSimultaneous Design of the Host Structure and the Polarisation Profile of Piezoelectric Sensors Applied to Cylindrical Shell Structures
Piezoelectric actuators and sensors are applied in many fields in order to produce forces or displacements with the aim of sensing, manipulating or measurement, among other functions. This study presents the numerical methodology to optimize the static response of a thick-shell structure consisting of piezoelectric sensors, based on the maximisation of the electric charge while controlling the amount of piezoelectric and material required. Two characteristic functions are involved, determining the topology of the sensor and the polarisation profile. Constraints over the reaction force are included in the optimisation problem in order to avoid singularities. The topology optimisation method is used to obtain the optimal results, where regularisation techniques (density filtering and projection) are used to avoid hinges. The minimum length scale can be controlled by the use of three different projections. As the main novelty, a displacement-controlled scheme is proposed in order to generate a robust algorithm for future studies including non-linearities.
- Open Access
- 5 March 2022
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 393
A new approach based on spectral graph theory to avoiding enclosed holes in topology optimization
- 5 March 2022
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 393
Open AccessA new approach based on spectral graph theory to avoiding enclosed holes in topology optimization
- 1 July 2021
- Published by IATED Academy in EDULEARN Proceedings
- p. 2438-2443
3D PRINTING OBJECTS FOR EXPERIMENTAL DEMONSTRATION OF THEORETICAL CONCEPTS IN ENGINEERING
Information about the paper titled "3D PRINTING OBJECTS FOR EXPERIMENTAL DEMONSTRATION OF THEORETICAL CONCEPTS IN ENGINEERING" at IATED Digital Library
- 1 July 2021
- Published by IATED Academy in EDULEARN Proceedings
- p. 2438-2443
3D PRINTING OBJECTS FOR EXPERIMENTAL DEMONSTRATION OF THEORETICAL CONCEPTS IN ENGINEERING
Information about the paper titled "3D PRINTING OBJECTS FOR EXPERIMENTAL DEMONSTRATION OF THEORETICAL CONCEPTS IN ENGINEERING" at IATED Digital Library
- 1 July 2021
- Published by IATED Academy in EDULEARN Proceedings
- p. 2444-2449
APPLICATION DESIGN FOR THE CALCULATION OF THE WATER THERMODYNAMIC PROPERTIES
Information about the paper titled "APPLICATION DESIGN FOR THE CALCULATION OF THE WATER THERMODYNAMIC PROPERTIES" at IATED Digital Library
- 1 July 2021
- Published by IATED Academy in EDULEARN Proceedings
- p. 2444-2449
APPLICATION DESIGN FOR THE CALCULATION OF THE WATER THERMODYNAMIC PROPERTIES
Information about the paper titled "APPLICATION DESIGN FOR THE CALCULATION OF THE WATER THERMODYNAMIC PROPERTIES" at IATED Digital Library
- 10 April 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 64 (1) , 257-280
Density-based topology optimisation considering nonlinear electromechanics
- 10 April 2021
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 64 (1) , 257-280
Density-based topology optimisation considering nonlinear electromechanics
- 7 June 2020
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 121 (20) , 4473-4492
Highly efficient general method for sensitivity analysis of eigenvectors with repeated eigenvalues without passing through adjacent eigenvectors
- 7 June 2020
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 121 (20) , 4473-4492
Highly efficient general method for sensitivity analysis of eigenvectors with repeated eigenvalues without passing through adjacent eigenvectors