Pragya Berwal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pragya Berwal has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jack J. Yoh
Department of Aerospace Engineering, Seoul National University , Seoul
9 shared publications - Ayushi Mehrotra8 shared publications
- Sudarshan Kumar
Indian Institute of Technology Bombay
5 shared publications Yejun Lee
4 shared publications- Bhupendra Khandelwal
The University of Alabama, Tuscaloosa
2 shared publications Ayushi Mehrotra
1 shared publication
Latest Publications
- Open Access
- 27 October 2026
- Published by Elsevier in SSRN Electronic Journal
Thermal runaway and vent-gas combustion hazards of LFP batteries under aerospace-relevant conditions
Lithium iron phosphate (LFP) batteries are widely regarded as intrinsically safer than other lithium-ion chemistries due to the structural stability of the olivine cathode. However, their thermal runaway (TR) behavior under aerospace-relevant thermal abuse remains poorly characterized. This work combines differential scanning calorimetry (DSC) on LFP cells across multiple states of charge (SOC = 25–100%) and heating rates (40–100 °C min⁻¹) with NASA CEA analysis of vent-gas combustion. The kinetic analysis identifies two dominant exothermic reactions linked to SEI decomposition and cathode degradation. SEI activation energy falls from ~100 kJ mol⁻¹ at SOC 25% to below 20 kJ mol⁻¹ at SOC 100%, while SEI and cathode pathways, well-separated at low SOC, converge at SOC 100%, indicating a shift toward coupled, autocatalytic degradation at high charge states. Constant-pressure analysis of the SOC 100% vent gas shows adiabatic flame temperatures exceeding 2500 K across all pressures (0.4–1.0 bar) and equivalence ratios examined, with the combined CO and H₂ mass fraction rising more than twofold from stoichiometric (φ = 1.0) to fuel-rich (φ = 1.3) conditions, while pressure and temperature have only minor effects. Complementary constant-volume analysis of confined ignition shows a consistent threefold pressure rise across the same conditions, largely independent of pressure, stoichiometry, or temperature. These results indicate that oxygen-limited, fuel-rich mixing, not reduced ambient pressure alone, governs combustion severity, and that confined-compartment overpressure is a robust hazard metric. Therefore, the findings highlight the need for SOC management, ventilation design, and compartment venting/relief strategies in aerospace LFP battery systems.
- 27 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThermal runaway and vent-gas combustion hazards of LFP batteries under aerospace-relevant conditions
Lithium iron phosphate (LFP) batteries are widely regarded as intrinsically safer than other lithium-ion chemistries due to the structural stability of the olivine cathode. However, their thermal runaway (TR) behavior under aerospace-relevant thermal abuse remains poorly characterized. This work combines differential scanning calorimetry (DSC) on LFP cells across multiple states of charge (SOC = 25–100%) and heating rates (40–100 °C min⁻¹) with NASA CEA analysis of vent-gas combustion. The kinetic analysis identifies two dominant exothermic reactions linked to SEI decomposition and cathode degradation. SEI activation energy falls from ~100 kJ mol⁻¹ at SOC 25% to below 20 kJ mol⁻¹ at SOC 100%, while SEI and cathode pathways, well-separated at low SOC, converge at SOC 100%, indicating a shift toward coupled, autocatalytic degradation at high charge states. Constant-pressure analysis of the SOC 100% vent gas shows adiabatic flame temperatures exceeding 2500 K across all pressures (0.4–1.0 bar) and equivalence ratios examined, with the combined CO and H₂ mass fraction rising more than twofold from stoichiometric (φ = 1.0) to fuel-rich (φ = 1.3) conditions, while pressure and temperature have only minor effects. Complementary constant-volume analysis of confined ignition shows a consistent threefold pressure rise across the same conditions, largely independent of pressure, stoichiometry, or temperature. These results indicate that oxygen-limited, fuel-rich mixing, not reduced ambient pressure alone, governs combustion severity, and that confined-compartment overpressure is a robust hazard metric. Therefore, the findings highlight the need for SOC management, ventilation design, and compartment venting/relief strategies in aerospace LFP battery systems.
- Open Access
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Translating frequency-resolved impedance into irreversible Joule heating under coupled thermal and cyclic ageing in batteries
Understanding the electro-thermal evolution of lithium-ion batteries (LIBs) is essential not only for thermal runaway (TR) prevention but also for controlled TR promotion in emerging aerospace applications. This study investigates the temperature-dependent impedance characteristics of lithium iron phosphate/silicon-carbon nanocomposite (LFP/SCN) cells using electrochemical impedance spectroscopy from 30 to 190 °C. Impedance spectra were decomposed into ohmic, charge-transfer, and diffusion-related resistance components, enabling quantification of their contributions to irreversible Joule heat generation. Results revealed a three-stage ageing comprising resistance growth, relaxation, and degradation onset. Accordingly, Joule heat generation evolved non-monotonically, increasing during early ageing, declining during intermediate cycling, then rising sharply with advanced degradation. Temperature-dependent measurements also showed a U-shaped Joule heating response, with high heat generation at low temperatures because ion transport was sluggish, minimal heating near 70–100 °C, and rapid heat escalation at elevated temperatures due to thermally induced degradation processes. An electro-thermochemical instability index (ETII) was introduced to normalize irreversible heat generation and identify battery triggerable regimes. The resulting electro-thermochemical characterization map distinguishes low, moderate, high, and extreme instability regions, providing a framework for preventing TR in conventional battery systems while enabling controlled TR for auxiliary propulsion and end-of-life disposal in satellites.
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTranslating frequency-resolved impedance into irreversible Joule heating under coupled thermal and cyclic ageing in batteries
Understanding the electro-thermal evolution of lithium-ion batteries (LIBs) is essential not only for thermal runaway (TR) prevention but also for controlled TR promotion in emerging aerospace applications. This study investigates the temperature-dependent impedance characteristics of lithium iron phosphate/silicon-carbon nanocomposite (LFP/SCN) cells using electrochemical impedance spectroscopy from 30 to 190 °C. Impedance spectra were decomposed into ohmic, charge-transfer, and diffusion-related resistance components, enabling quantification of their contributions to irreversible Joule heat generation. Results revealed a three-stage ageing comprising resistance growth, relaxation, and degradation onset. Accordingly, Joule heat generation evolved non-monotonically, increasing during early ageing, declining during intermediate cycling, then rising sharply with advanced degradation. Temperature-dependent measurements also showed a U-shaped Joule heating response, with high heat generation at low temperatures because ion transport was sluggish, minimal heating near 70–100 °C, and rapid heat escalation at elevated temperatures due to thermally induced degradation processes. An electro-thermochemical instability index (ETII) was introduced to normalize irreversible heat generation and identify battery triggerable regimes. The resulting electro-thermochemical characterization map distinguishes low, moderate, high, and extreme instability regions, providing a framework for preventing TR in conventional battery systems while enabling controlled TR for auxiliary propulsion and end-of-life disposal in satellites.
- Open Access
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Combustion severity and ignition risks of lithium iron phosphate batteries in aerospace environments
Lithium iron phosphate (LFP) batteries are generally considered safer than other battery chemistries because of the structural stability of their olivine cathodes. However, their thermal runaway (TR) behavior in low-pressure, oxygen-limited aerospace environments remains poorly understood. This study investigates the TR characteristics of LFP batteries using a combined experimental–thermochemical approach for aerospace mobility applications. Differential scanning calorimetry was performed on LFP cells at multiple states of charge (SOC, 25–100%) and heating rates of 40–100 °C min⁻¹. Kinetic analysis identified two dominant exothermic reactions associated with solid electrolyte interphase decomposition and cathode degradation, with primary activation energies ranging from 55 to 65 kJ mol⁻¹. Higher SOC reduced onset temperatures and increased total heat release, indicating enhanced reactivity. The experimentally determined kinetic parameters were incorporated into chemical equilibrium simulations to evaluate combustion behavior under ambient and aerospace conditions. Although adiabatic flame temperatures exceeded 2500 K in both cases, sub-atmospheric aerospace conditions promoted incomplete combustion. Consequently, the combined mole fractions of CO and H₂ increased by approximately threefold compared with ambient conditions. These elevated concentrations present significant risks of secondary ignition, toxic gas accumulation, and containment failure, highlighting the need for SOC management, ventilation control, and thermal mitigation strategies in aerospace battery systems.
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCombustion severity and ignition risks of lithium iron phosphate batteries in aerospace environments
Lithium iron phosphate (LFP) batteries are generally considered safer than other battery chemistries because of the structural stability of their olivine cathodes. However, their thermal runaway (TR) behavior in low-pressure, oxygen-limited aerospace environments remains poorly understood. This study investigates the TR characteristics of LFP batteries using a combined experimental–thermochemical approach for aerospace mobility applications. Differential scanning calorimetry was performed on LFP cells at multiple states of charge (SOC, 25–100%) and heating rates of 40–100 °C min⁻¹. Kinetic analysis identified two dominant exothermic reactions associated with solid electrolyte interphase decomposition and cathode degradation, with primary activation energies ranging from 55 to 65 kJ mol⁻¹. Higher SOC reduced onset temperatures and increased total heat release, indicating enhanced reactivity. The experimentally determined kinetic parameters were incorporated into chemical equilibrium simulations to evaluate combustion behavior under ambient and aerospace conditions. Although adiabatic flame temperatures exceeded 2500 K in both cases, sub-atmospheric aerospace conditions promoted incomplete combustion. Consequently, the combined mole fractions of CO and H₂ increased by approximately threefold compared with ambient conditions. These elevated concentrations present significant risks of secondary ignition, toxic gas accumulation, and containment failure, highlighting the need for SOC management, ventilation control, and thermal mitigation strategies in aerospace battery systems.
- Open Access
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Thermal runaway behavior of lithium-ion batteries in aerospace mobility systems
Lithium iron phosphate (LFP) batteries are widely regarded as intrinsically safer than other lithium-ion chemistries due to the structural stability of the olivine cathode. However, their behavior under aerospace operating environments—characterized by reduced pressure and oxygen-limited conditions—remains insufficiently understood. In this work, the thermal runaway characteristics of LFP batteries were investigated through a combined experimental–thermochemical approach to assess potential hazards in aerospace mobility applications. Differential scanning calorimetry (DSC) experiments were conducted on full LFP cells at multiple states of charge (SOC = 25–100%) under high heating rates (40–100 °C min−1) to examine thermal decomposition behavior. Kinetic analysis revealed two dominant exothermic reactions associated with solid electrolyte interphase (SEI) decomposition and subsequent cathode degradation. The activation energy for the primary reaction ranged from approximately 55–65 kJ mol−1, with increasing SOC leading to earlier onset temperatures and greater heat release, indicating enhanced reactivity at high charge states. To evaluate the combustion consequences of thermal runaway gases, experimentally derived parameters were integrated with thermochemical equilibrium calculations using NASA Chemical Equilibrium with Applications (CEA). Simulations were performed for representative ambient (φ = 1.0, ~1 bar) and aerospace (φ = 1.3, 0.4–0.8 bar) conditions. Results indicate that although adiabatic flame temperatures exceed 2500 K under both environments, aerospace conditions promote significantly higher fractions of incomplete combustion products. The combined mole fraction of CO and H2 increased from approximately 0.007–0.008 under ambient conditions to ~0.019–0.020 in the aerospace scenario, nearly three times higher due to oxygen-limited combustion. These findings demonstrate that while LFP cathodes exhibit strong structural stability, the combustion behavior of their thermal runaway gases can become more hazardous in aerospace environments. The study highlights the importance of SOC management, ventilation control, and thermal mitigation strategies for next-generation aerospace battery systems.
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThermal runaway behavior of lithium-ion batteries in aerospace mobility systems
Lithium iron phosphate (LFP) batteries are widely regarded as intrinsically safer than other lithium-ion chemistries due to the structural stability of the olivine cathode. However, their behavior under aerospace operating environments—characterized by reduced pressure and oxygen-limited conditions—remains insufficiently understood. In this work, the thermal runaway characteristics of LFP batteries were investigated through a combined experimental–thermochemical approach to assess potential hazards in aerospace mobility applications. Differential scanning calorimetry (DSC) experiments were conducted on full LFP cells at multiple states of charge (SOC = 25–100%) under high heating rates (40–100 °C min−1) to examine thermal decomposition behavior. Kinetic analysis revealed two dominant exothermic reactions associated with solid electrolyte interphase (SEI) decomposition and subsequent cathode degradation. The activation energy for the primary reaction ranged from approximately 55–65 kJ mol−1, with increasing SOC leading to earlier onset temperatures and greater heat release, indicating enhanced reactivity at high charge states. To evaluate the combustion consequences of thermal runaway gases, experimentally derived parameters were integrated with thermochemical equilibrium calculations using NASA Chemical Equilibrium with Applications (CEA). Simulations were performed for representative ambient (φ = 1.0, ~1 bar) and aerospace (φ = 1.3, 0.4–0.8 bar) conditions. Results indicate that although adiabatic flame temperatures exceed 2500 K under both environments, aerospace conditions promote significantly higher fractions of incomplete combustion products. The combined mole fraction of CO and H2 increased from approximately 0.007–0.008 under ambient conditions to ~0.019–0.020 in the aerospace scenario, nearly three times higher due to oxygen-limited combustion. These findings demonstrate that while LFP cathodes exhibit strong structural stability, the combustion behavior of their thermal runaway gases can become more hazardous in aerospace environments. The study highlights the importance of SOC management, ventilation control, and thermal mitigation strategies for next-generation aerospace battery systems.
- Open Access
- 27 February 2026
- Published by Elsevier in SSRN Electronic Journal
Electro-thermal sentinel frequency for early thermal runaway detection in lithium-iron-phosphate cells using phase sensitivity
Preventing thermal runaway (TR) in lithium-ion batteries (LIBs) demands early detection of electro-thermal instability well before measurable temperature rise. The present study establishes a comprehensive electrochemical-thermal diagnostic framework that identifies a chemistry-dependent sentinel frequency, highly sensitive to temperature but minimally affected by the state-of-charge (SOC). Commercial lithium iron phosphate (LFP) cells were reassembled into coin cells and tested at varying SOCs (0%-100%) and temperatures (30oC-190oC). Complete impedance spectra were recorded, confirming Kramers-Kronig consistency, to conduct detailed analysis of SOC- and temperature-dependent transitions in ohmic, charge-transfer, and diffusion resistances. Impedance analysis revealed high resistance at low temperatures due to Li+ diffusion limitations and poor electronic conductivity intrinsic to delithiated LFP. Joule heating trends exhibited a U-shaped temperature dependence, with minimum Joule heating shifting to lower temperatures as SOC increased, linked to rapid charge-transfer resistance rise indicating earlier thermal resilience loss. Phase angle analysis revealed that low (diffusion-controlled) and high-frequency (capacitive dominated) regions lack consistent temperature sensitivity and are strongly SOC-dependent. In contrast, the mid-frequency band (102-104 Hz) exhibits the strongest and most coherent thermal sensitivity across SOCs. By applying a statistically weighted sensitivity metric combining thermal responsivity and SOC invariance, a single characteristic electro-thermal monitoring frequency was identified, corresponding to instability onset where resistive heating reinforces chemical heating. Embedding this frequency into compact impedance sensor enables real-time, pre-thermal TR detection, substantially outperforming conventional thermochemical sensors that respond only after significant heating initiates.
- 27 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessElectro-thermal sentinel frequency for early thermal runaway detection in lithium-iron-phosphate cells using phase sensitivity
Preventing thermal runaway (TR) in lithium-ion batteries (LIBs) demands early detection of electro-thermal instability well before measurable temperature rise. The present study establishes a comprehensive electrochemical-thermal diagnostic framework that identifies a chemistry-dependent sentinel frequency, highly sensitive to temperature but minimally affected by the state-of-charge (SOC). Commercial lithium iron phosphate (LFP) cells were reassembled into coin cells and tested at varying SOCs (0%-100%) and temperatures (30oC-190oC). Complete impedance spectra were recorded, confirming Kramers-Kronig consistency, to conduct detailed analysis of SOC- and temperature-dependent transitions in ohmic, charge-transfer, and diffusion resistances. Impedance analysis revealed high resistance at low temperatures due to Li+ diffusion limitations and poor electronic conductivity intrinsic to delithiated LFP. Joule heating trends exhibited a U-shaped temperature dependence, with minimum Joule heating shifting to lower temperatures as SOC increased, linked to rapid charge-transfer resistance rise indicating earlier thermal resilience loss. Phase angle analysis revealed that low (diffusion-controlled) and high-frequency (capacitive dominated) regions lack consistent temperature sensitivity and are strongly SOC-dependent. In contrast, the mid-frequency band (102-104 Hz) exhibits the strongest and most coherent thermal sensitivity across SOCs. By applying a statistically weighted sensitivity metric combining thermal responsivity and SOC invariance, a single characteristic electro-thermal monitoring frequency was identified, corresponding to instability onset where resistive heating reinforces chemical heating. Embedding this frequency into compact impedance sensor enables real-time, pre-thermal TR detection, substantially outperforming conventional thermochemical sensors that respond only after significant heating initiates.
- 17 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 661
Dimensionless thermal safety framework for nickel-enriched lithium-ion batteries: From runaway onset to extinction thresholds
- 17 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 661
Dimensionless thermal safety framework for nickel-enriched lithium-ion batteries: From runaway onset to extinction thresholds
- 1 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 660
An electro-thermal approach for improving safety in lithium iron phosphate batteries
- 1 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 660
An electro-thermal approach for improving safety in lithium iron phosphate batteries
- 22 August 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 657
Anode-triggered thermal runaway in LiFePO4 cells under rapid heating: rethinking interfacial stability
- 22 August 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 657
Anode-triggered thermal runaway in LiFePO4 cells under rapid heating: rethinking interfacial stability
- 24 January 2025
- Published by Elsevier in Combustion and Flame
- Vol. 274
Combustion theory based cooling strategies for preventing thermal runaway in modern batteries
- 24 January 2025
- Published by Elsevier in Combustion and Flame
- Vol. 274
Combustion theory based cooling strategies for preventing thermal runaway in modern batteries