Ángel Estévez-Alonso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ángel Estévez-Alonso has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Robbert Kleerebezem
Department of Biotechnology, Delft University of Technology, van der Maasweg 9, 2629 HZ Delft, The Netherlands
5 shared publications- Ramon Ganigué
Ghent University
4 shared publications Alan Werker
Wetsus, European Centre of Excellence for Sustainable Water Technology, Oostergoweg 9, 8911, MA, Leeuwarden, the Netherlands
3 shared publicationsMark C.M. van Loosdrecht
Department of Biotechnology, Delft University of Technology, van der Maasweg 9, 2629 HZ Delft, The Netherlands
3 shared publications- Ruizhe Pei
Department of Biotechnology, Delft University of Technology, van der Maasweg 9, 2629 HZ Delft, The Netherlands
3 shared publications - Alan Werker
Wetsus, European Centre of Excellence for Sustainable Water Technology, Oostergoweg 9, 8911 MA, Leeuwarden, The Netherlands
2 shared publications
Latest Publications
- 27 August 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (5)
Polyurethane foam carriers improve stability and resilience of lactic acid chain elongation in continuous bioreactors
- 27 August 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (5)
Polyurethane foam carriers improve stability and resilience of lactic acid chain elongation in continuous bioreactors
- Open Access
Lactate:propionate molar ratio determines valerate production in secondary lactate fermentations
Odd-chain carboxylates such as valerate and heptanoate are ecologically relevant metabolites and promising platform chemicals, yet the factors leading to their formation during secondary lactate fermentations remain poorly understood. Here, a continuous anaerobic bioreactor was operated for 297 days under mildly acidic conditions to evaluate how lactate:propionate molar ratios shape product spectrum in lactate fermentations. Valerate was the predominant odd-chain product under all conditions, reaching concentrations up to 110 mM, while heptanoate accumulated only at low levels (<10 mM). At low lactate concentrations (10-20 g/L), product selectivity strongly depended on the lactate:propionate ratio. When lactate:propionate ratios were around 1.2 mol/mol, odd-chain products were favored, whereas higher ratios (up to 4.8 mol/mol) shifted metabolism toward caproate and butyrate formation. However, this trend was not maintained at higher lactate concentrations (30-40 g/L; lactate not fully consumed), where odd-chain selectivities remained high even at lactate:propionate ratios of 4.8 mol/mol. Pathway analysis indicated that under high-lactate conditions up to 30% of lactate was redirected toward propionate and acetate formation, likely via the acrylate pathway. Microbial community analysis revealed a stable dominance of Caproiciproducens spp., that could be correlated to valerate production. Overall, this work provides mechanistic insights into the ecology of lactate fermentations and offers a framework for steering product selectivity in engineered anaerobic systems.
Open AccessLactate:propionate molar ratio determines valerate production in secondary lactate fermentations
Odd-chain carboxylates such as valerate and heptanoate are ecologically relevant metabolites and promising platform chemicals, yet the factors leading to their formation during secondary lactate fermentations remain poorly understood. Here, a continuous anaerobic bioreactor was operated for 297 days under mildly acidic conditions to evaluate how lactate:propionate molar ratios shape product spectrum in lactate fermentations. Valerate was the predominant odd-chain product under all conditions, reaching concentrations up to 110 mM, while heptanoate accumulated only at low levels (<10 mM). At low lactate concentrations (10-20 g/L), product selectivity strongly depended on the lactate:propionate ratio. When lactate:propionate ratios were around 1.2 mol/mol, odd-chain products were favored, whereas higher ratios (up to 4.8 mol/mol) shifted metabolism toward caproate and butyrate formation. However, this trend was not maintained at higher lactate concentrations (30-40 g/L; lactate not fully consumed), where odd-chain selectivities remained high even at lactate:propionate ratios of 4.8 mol/mol. Pathway analysis indicated that under high-lactate conditions up to 30% of lactate was redirected toward propionate and acetate formation, likely via the acrylate pathway. Microbial community analysis revealed a stable dominance of Caproiciproducens spp., that could be correlated to valerate production. Overall, this work provides mechanistic insights into the ecology of lactate fermentations and offers a framework for steering product selectivity in engineered anaerobic systems.
- Open Access
- 9 March 2026
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 110 (1)
Growth and protein content of Cupriavidus necator on organic acids derived from fermented grey starch
Grey starch (GS) is a byproduct of potato processing and is conventionally valorised as low-grade animal feed or for biogas generation. In this manuscript, we systematically investigate the mixed culture fermentation of GS to organic acids and their subsequent aerobic upgrading to microbial protein via Cupriavidus necator. We focused on protein content, growth kinetics, biomass yield on individual, and mixed organic acids (C1-C6), using both synthetic media and real fermented effluents. High-throughput cultivation in microtiter plates was employed to evaluate performance across both straight-chain forms and isoforms of the acids. C. necator demonstrated growth on all tested individual substrates, although with distinct individual behaviour. Lactate, butyrate, and hexanoate supported the highest biomass yields, reaching up to 0.24 gCDW/gCOD (grammes of cell dry weight per grammes of COD fed). Lactate enabled the highest specific growth rate (0.6 h-1) with 29 ± 4% of protein. The maximum protein content (70 ± 11%) was observed on acetate at an initial concentration of 2 g/L. Depending on the acid, higher initial concentrations (2 and 4 g/L) led to increased cell dry weight but reduced growth rates or inhibition in some cases. Real fermented GS, primarily composed of lactate and butyrate, proved to be a viable substrate for microbial protein production. Undiluted fermented GS yielded the highest protein content (70 ± 9%), while a 1/4 dilution (2.6 gCOD/L) enabled the fastest growth (0.84 h-1) compared to all tested fermented GS and acid concentrations. These findings highlight the potential of GS-derived organic acids as feedstock for microbial protein production for feed and food. KEY POINTS: C. necator grows on all tested individual organic acids (C1-C6). Protein production varies by acid type and initial concentration. Grey starch was converted to organic acids for microbial protein production.
- 9 March 2026
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 110 (1)
Open AccessGrowth and protein content of Cupriavidus necator on organic acids derived from fermented grey starch
Grey starch (GS) is a byproduct of potato processing and is conventionally valorised as low-grade animal feed or for biogas generation. In this manuscript, we systematically investigate the mixed culture fermentation of GS to organic acids and their subsequent aerobic upgrading to microbial protein via Cupriavidus necator. We focused on protein content, growth kinetics, biomass yield on individual, and mixed organic acids (C1-C6), using both synthetic media and real fermented effluents. High-throughput cultivation in microtiter plates was employed to evaluate performance across both straight-chain forms and isoforms of the acids. C. necator demonstrated growth on all tested individual substrates, although with distinct individual behaviour. Lactate, butyrate, and hexanoate supported the highest biomass yields, reaching up to 0.24 gCDW/gCOD (grammes of cell dry weight per grammes of COD fed). Lactate enabled the highest specific growth rate (0.6 h-1) with 29 ± 4% of protein. The maximum protein content (70 ± 11%) was observed on acetate at an initial concentration of 2 g/L. Depending on the acid, higher initial concentrations (2 and 4 g/L) led to increased cell dry weight but reduced growth rates or inhibition in some cases. Real fermented GS, primarily composed of lactate and butyrate, proved to be a viable substrate for microbial protein production. Undiluted fermented GS yielded the highest protein content (70 ± 9%), while a 1/4 dilution (2.6 gCOD/L) enabled the fastest growth (0.84 h-1) compared to all tested fermented GS and acid concentrations. These findings highlight the potential of GS-derived organic acids as feedstock for microbial protein production for feed and food. KEY POINTS: C. necator grows on all tested individual organic acids (C1-C6). Protein production varies by acid type and initial concentration. Grey starch was converted to organic acids for microbial protein production.
- Open Access
- 14 January 2026
- Published by Oxford University Press (OUP) in ISME Communications
- Vol. 6 (1)
Lactate:propionate molar ratio and substrate concentrations shape valerate production in secondary lactate fermentations
Odd-chain carboxylates such as valerate and heptanoate are ecologically relevant metabolites and promising platform chemicals, yet the factors leading to their formation during secondary lactate fermentations remain poorly understood. Here, a continuous anaerobic bioreactor was operated for 297 days at pH 5.5 to evaluate how lactate:propionate molar ratios shape product spectrum in lactate fermentations. Valerate was the predominant odd-chain product under all conditions, reaching concentrations up to 110 mM, while heptanoate accumulated only at low levels (<10 mM). At low lactate concentrations (110–220 mM), product selectivity strongly depended on the lactate:propionate ratio. When lactate:propionate ratios were around 1.2 mol/mol, odd-chain products were favored, whereas higher ratios (up to 4.8 mol/mol) shifted metabolism toward caproate and butyrate formation. However, this trend was not maintained at higher lactate concentrations (330–440 mM; lactate not fully consumed), where odd-chain selectivities remained high even at lactate:propionate ratios of 4.8 mol/mol. Pathway analysis allowed to infer that under high-lactate conditions, up to 30% of lactate was used for propionate and acetate formation. Microbial community analysis revealed a stable dominance of Caproiciproducens spp. when valerate was the main product. Overall, this work provides mechanistic insights into the ecology of lactate fermentations and offers a framework for steering product selectivity in engineered anaerobic systems.
- 14 January 2026
- Published by Oxford University Press (OUP) in ISME Communications
- Vol. 6 (1)
Open AccessLactate:propionate molar ratio and substrate concentrations shape valerate production in secondary lactate fermentations
Odd-chain carboxylates such as valerate and heptanoate are ecologically relevant metabolites and promising platform chemicals, yet the factors leading to their formation during secondary lactate fermentations remain poorly understood. Here, a continuous anaerobic bioreactor was operated for 297 days at pH 5.5 to evaluate how lactate:propionate molar ratios shape product spectrum in lactate fermentations. Valerate was the predominant odd-chain product under all conditions, reaching concentrations up to 110 mM, while heptanoate accumulated only at low levels (<10 mM). At low lactate concentrations (110–220 mM), product selectivity strongly depended on the lactate:propionate ratio. When lactate:propionate ratios were around 1.2 mol/mol, odd-chain products were favored, whereas higher ratios (up to 4.8 mol/mol) shifted metabolism toward caproate and butyrate formation. However, this trend was not maintained at higher lactate concentrations (330–440 mM; lactate not fully consumed), where odd-chain selectivities remained high even at lactate:propionate ratios of 4.8 mol/mol. Pathway analysis allowed to infer that under high-lactate conditions, up to 30% of lactate was used for propionate and acetate formation. Microbial community analysis revealed a stable dominance of Caproiciproducens spp. when valerate was the main product. Overall, this work provides mechanistic insights into the ecology of lactate fermentations and offers a framework for steering product selectivity in engineered anaerobic systems.
- Open Access
- 23 January 2025
- Published by Elsevier in Water Research
- Vol. 275, 123160
Demonstrating performance in scaled-up production and quality control of polyhydroxyalkanoates using municipal waste activated sludge
- 23 January 2025
- Published by Elsevier in Water Research
- Vol. 275, 123160
Open AccessDemonstrating performance in scaled-up production and quality control of polyhydroxyalkanoates using municipal waste activated sludge
- Open Access
- 18 October 2022
- Published by Elsevier in Water Research
- Vol. 226, 119259
Calcium enhances polyhydroxyalkanoate production and promotes selective growth of the polyhydroxyalkanoate-storing biomass in municipal activated sludge
- 18 October 2022
- Published by Elsevier in Water Research
- Vol. 226, 119259
Open AccessCalcium enhances polyhydroxyalkanoate production and promotes selective growth of the polyhydroxyalkanoate-storing biomass in municipal activated sludge
- Open Access
- 28 September 2022
- Published by Elsevier in Bioresource Technology
- Vol. 364, 128035
Process conditions affect properties and outcomes of polyhydroxyalkanoate accumulation in municipal activated sludge
- 28 September 2022
- Published by Elsevier in Bioresource Technology
- Vol. 364, 128035
Open AccessProcess conditions affect properties and outcomes of polyhydroxyalkanoate accumulation in municipal activated sludge
- Open Access
- 28 July 2022
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 56 (16) , 11729-11738
Exploring the Limits of Polyhydroxyalkanoate Production by Municipal Activated Sludge
Municipal activated sludge can be used for polyhydroxyalkanoate (PHA) production, when supplied with volatile fatty acids. In this work, standardized PHA accumulation assays were performed with different activated sludge to determine (1) the maximum biomass PHA content, (2) the degree of enrichment (or volume-to-volume ratio of PHA-accumulating bacteria with respect to the total biomass), and (3) the average PHA content in the PHA-storing biomass fraction. The maximum attained biomass PHA content with different activated sludge ranged from 0.18 to 0.42 gPHA/gVSS, and the degree of enrichment ranged from 0.16 to 0.51 volume/volume. The average PHA content within the PHA-accumulating biomass fraction was relatively constant and independent of activated sludge source, with an average value of 0.58 ± 0.07 gPHA/gVSS. The degree of enrichment for PHA-accumulating bacteria was identified as the key factor to maximize PHA content when municipal activated sludge is directly used for PHA accumulation. Future optimization should focus on obtaining a higher degree of enrichment of PHA-accumulating biomass, either through selection during wastewater treatment or by selective growth during PHA accumulation. A PHA content in the order of 0.6 g PHA/g VSS is a realistic target to be achieved when using municipal activated sludge for PHA production.
- 28 July 2022
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 56 (16) , 11729-11738
Open AccessExploring the Limits of Polyhydroxyalkanoate Production by Municipal Activated Sludge
Municipal activated sludge can be used for polyhydroxyalkanoate (PHA) production, when supplied with volatile fatty acids. In this work, standardized PHA accumulation assays were performed with different activated sludge to determine (1) the maximum biomass PHA content, (2) the degree of enrichment (or volume-to-volume ratio of PHA-accumulating bacteria with respect to the total biomass), and (3) the average PHA content in the PHA-storing biomass fraction. The maximum attained biomass PHA content with different activated sludge ranged from 0.18 to 0.42 gPHA/gVSS, and the degree of enrichment ranged from 0.16 to 0.51 volume/volume. The average PHA content within the PHA-accumulating biomass fraction was relatively constant and independent of activated sludge source, with an average value of 0.58 ± 0.07 gPHA/gVSS. The degree of enrichment for PHA-accumulating bacteria was identified as the key factor to maximize PHA content when municipal activated sludge is directly used for PHA accumulation. Future optimization should focus on obtaining a higher degree of enrichment of PHA-accumulating biomass, either through selection during wastewater treatment or by selective growth during PHA accumulation. A PHA content in the order of 0.6 g PHA/g VSS is a realistic target to be achieved when using municipal activated sludge for PHA production.
- Open Access
- 1 October 2021
- Published by Elsevier in Bioresource Technology
- Vol. 337, 125420
Simultaneous nitrification and denitrification in microbial community-based polyhydroxyalkanoate production
- 1 October 2021
- Published by Elsevier in Bioresource Technology
- Vol. 337, 125420
Open AccessSimultaneous nitrification and denitrification in microbial community-based polyhydroxyalkanoate production
- 1 August 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 146 (8) , 04020091
Volatile Fatty Acid Product Spectrum as a Function of the Solids Retention Time in an Anaerobic Granular Sludge Process
Volatile fatty acids (VFA) may serve as building blocks for the production of chemicals and polymers. A technology enabling high-rate VFA production from carbohydrate-rich wastewater is the anaerobic granular sludge process. In this study, the characteristics of an anaerobic granular sludge process fermenting glucose was evaluated at different solid retention times (SRT). A lab-scale anaerobic sequencing batch reactor fed with glucose was operated at a pH of 5.5 and at SRT values of 1–2, 10–20, and 40–50 days and operated in total for 215 days. A low sludge volume index (SVI) of allowed for the high SRT and high volatile suspended solid (VSS) concentration that reached . This high VSS concentration enabled a glucose consumption rate of at an SRT of 40–50 days. Two product spectra were obtained: (1) a propionate:acetate mixture with a ratio of ( ) produced at an SRT of 40–50 days; and (2) an acetate dominated product spectrum was obtained at 1–2 days and 10–20 days SRT (0.71–0.75 ). Overall, a high VFA yield between 0.77 and 0.79 was obtained throughout all enrichments. This work demonstrates that high-rate VFA production combining high yields and low solid concentrations in the effluent technologically can be achieved. This work contributes to the implementation of waste-based production of VFA using anaerobic granular sludge.- 1 August 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 146 (8) , 04020091
Volatile Fatty Acid Product Spectrum as a Function of the Solids Retention Time in an Anaerobic Granular Sludge Process
Volatile fatty acids (VFA) may serve as building blocks for the production of chemicals and polymers. A technology enabling high-rate VFA production from carbohydrate-rich wastewater is the anaerobic granular sludge process. In this study, the characteristics of an anaerobic granular sludge process fermenting glucose was evaluated at different solid retention times (SRT). A lab-scale anaerobic sequencing batch reactor fed with glucose was operated at a pH of 5.5 and at SRT values of 1–2, 10–20, and 40–50 days and operated in total for 215 days. A low sludge volume index (SVI) of allowed for the high SRT and high volatile suspended solid (VSS) concentration that reached . This high VSS concentration enabled a glucose consumption rate of at an SRT of 40–50 days. Two product spectra were obtained: (1) a propionate:acetate mixture with a ratio of ( ) produced at an SRT of 40–50 days; and (2) an acetate dominated product spectrum was obtained at 1–2 days and 10–20 days SRT (0.71–0.75 ). Overall, a high VFA yield between 0.77 and 0.79 was obtained throughout all enrichments. This work demonstrates that high-rate VFA production combining high yields and low solid concentrations in the effluent technologically can be achieved. This work contributes to the implementation of waste-based production of VFA using anaerobic granular sludge.