David De-Castro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David De-Castro has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Francisca Garcia Caballero
MATERALIA Research Group, Department of Physical Metallurgy, National Centre for Metallurgical Research (CENIM-CSIC), Madrid, Spain
6 shared publications - Carlos Capdevila
Department of Physical Metallurgy, National Center for Metallurgical Research (CENIM-CSIC), Madrid, Spain
5 shared publications - Adriana Eres-Castellanos
Materalia Research Group, Department of Physical Metallurgy, National Center for Metallurgical Research (CENIM-CSIC), Madrid, Spain
3 shared publications - Jose Antonio Jimenez
Department of Physical Metallurgy, National Center for Metallurgical Research (CENIM-CSIC), 28040 Madrid, Spain
3 shared publications - Rosalia Rementeria
Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC)
3 shared publications - Thomas Sourmail
Asco Industries Research (CREAS), BP 70045 Hagondange, France
3 shared publications
Latest Publications
- Open Access
- 28 September 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-13
Effect of processing parameters on texture and variant selection of as-built 300 maraging steel processed by laser powder bed fusion
Among the materials that might be manufactured with laser powder bed fusion (LPBF), one can highlight maraging steels, with excellent weldability, strength and fracture toughness. However, the effects of the processing parameters and the mechanisms governing the as-built texture are not clear yet. A recent publication showed a low texture index in the prior austenite, in contrast to other alloys subjected to LPBF with the same strategy. Authors suggested several hypotheses, although no conclusions were drawn. This work aims to investigate these findings by using a 300 maraging steel processed under different conditions, i.e. different printer, powder layer thickness and laser emission mode. To do so, X-Ray Diffraction, Electron Backscattered Diffraction and Scanning Electron Microscopy have been used. Results show that the heat treatment intrinsic to the LPBF process does not affect the prior austenite grains, whose texture and morphology remain unchanged throughout the process. Also, for the studied ranges, the microstructure texture is not related to the powder layer thickness or to the laser emission mode, although it could be affected by the laser power or the scan strategy. Finally, a low degree of variant selection has been observed, where the selected variants are those that contribute to a martensite cubic rotated texture.
- 28 September 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-13
Open AccessEffect of processing parameters on texture and variant selection of as-built 300 maraging steel processed by laser powder bed fusion
Among the materials that might be manufactured with laser powder bed fusion (LPBF), one can highlight maraging steels, with excellent weldability, strength and fracture toughness. However, the effects of the processing parameters and the mechanisms governing the as-built texture are not clear yet. A recent publication showed a low texture index in the prior austenite, in contrast to other alloys subjected to LPBF with the same strategy. Authors suggested several hypotheses, although no conclusions were drawn. This work aims to investigate these findings by using a 300 maraging steel processed under different conditions, i.e. different printer, powder layer thickness and laser emission mode. To do so, X-Ray Diffraction, Electron Backscattered Diffraction and Scanning Electron Microscopy have been used. Results show that the heat treatment intrinsic to the LPBF process does not affect the prior austenite grains, whose texture and morphology remain unchanged throughout the process. Also, for the studied ranges, the microstructure texture is not related to the powder layer thickness or to the laser emission mode, although it could be affected by the laser power or the scan strategy. Finally, a low degree of variant selection has been observed, where the selected variants are those that contribute to a martensite cubic rotated texture.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Effect of Laser Emission Mode and Layer Thickness on the As-Built Microstructure of a Selective Laser Melted Maraging Steel
Selective laser melting (SLM) or laser powder-bed fusion (L-PBF) is a powder-based additive manufacturing process that enables to produce steel parts with complex designs and a minimum amount of material. In this work, a high performance 300 maraging steel were processed by SLM, where the layer thickness and the laser emission mode were modified. The microstructure was studied analyzing each of the process steps: melting, solidification and phase transformations. Advanced techniques such as electro-backscattered diffraction, X-ray diffraction and electron probe micro analysis were used. Results evidenced the importance of layer thickness as a key parameter to modify the solidification cell size. X-Ray Diffraction enabled to identify three different phases in the microstructure: bct, bcc and fcc. Although the studied processing parameters did not present a significant effect on either the volume fractions of these structures, their lattice parameters, crystallite size or microstrain, several questions were raised. Finally, the performed crystallographic analysis proved that growth happens epitaxially and competitively during solidification. For it to happen, side branching phenomena were identified.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffect of Laser Emission Mode and Layer Thickness on the As-Built Microstructure of a Selective Laser Melted Maraging Steel
Selective laser melting (SLM) or laser powder-bed fusion (L-PBF) is a powder-based additive manufacturing process that enables to produce steel parts with complex designs and a minimum amount of material. In this work, a high performance 300 maraging steel were processed by SLM, where the layer thickness and the laser emission mode were modified. The microstructure was studied analyzing each of the process steps: melting, solidification and phase transformations. Advanced techniques such as electro-backscattered diffraction, X-ray diffraction and electron probe micro analysis were used. Results evidenced the importance of layer thickness as a key parameter to modify the solidification cell size. X-Ray Diffraction enabled to identify three different phases in the microstructure: bct, bcc and fcc. Although the studied processing parameters did not present a significant effect on either the volume fractions of these structures, their lattice parameters, crystallite size or microstrain, several questions were raised. Finally, the performed crystallographic analysis proved that growth happens epitaxially and competitively during solidification. For it to happen, side branching phenomena were identified.
- Open Access
- 1 November 2021
- Published by SAGE Publications in Materials Science and Technology
- Vol. 37 (16) , 1302-1310
Assessing the implementation of machine learning models for thermal treatments design
The latest progress in machine learning (ML) algorithms enabled to predict some steel physical properties previously modelled by linear regression (LR), such as the Ms temperature. Authors claimed that the performance given by ML models could improve the one of previous LR models, although they did not include fair comparisons. In this work, a large database was used to train different ML algorithms, whose Ms temperature predictions were compared to the ones of previous literature empirical models. ML methods were proved to require longer computational times and wider knowledge, while leading to similar results. Therefore, we recommend that ML methods are not always considered as the first option when trying to solve easy problems that can be modelled by LR techniques.
- 1 November 2021
- Published by SAGE Publications in Materials Science and Technology
- Vol. 37 (16) , 1302-1310
Open AccessAssessing the implementation of machine learning models for thermal treatments design
The latest progress in machine learning (ML) algorithms enabled to predict some steel physical properties previously modelled by linear regression (LR), such as the Ms temperature. Authors claimed that the performance given by ML models could improve the one of previous LR models, although they did not include fair comparisons. In this work, a large database was used to train different ML algorithms, whose Ms temperature predictions were compared to the ones of previous literature empirical models. ML methods were proved to require longer computational times and wider knowledge, while leading to similar results. Therefore, we recommend that ML methods are not always considered as the first option when trying to solve easy problems that can be modelled by LR techniques.
- Open Access
Design and Development of Complex Phase Steels with Improved Combination of Strength and Stretch-Flangeability
This study presents the design and development of a hot-rolled bainitic steel, presenting a good combination of strength and stretch-flangeability, for automotive applications. Ti, Nb, and Mo were added in the steel composition in order to control austenite grain sizes, enhance precipitation hardening, and promote the formation of bainite. This study focuses on the effect of process parameters on final microstructures and mechanical properties. These parameters are the finishing rolling temperature, which conditions the austenite microstructure before its decomposition, and the coiling temperature, which conditions the nature and morphology of the ferritic phases transformed. A preliminary study allowed to determine the austenite grain growth behavior during reheating, the recrystallization kinetics, and the continuous cooling transformation curves of the studied steel. Then, a first set of parameters was tested at a semi-industrial scale, which confirmed that the best elongation properties were obtained for homogeneous bainitic lath/granular microstructures, that can be produced by choosing a coiling temperature of 500 . When choosing those parameters for the final industrial trial, the microstructure obtained consisted of a homogeneous lath/granular bainite mixture that presented a Ultimate Tensile Strength of 830 MPa and a Hole Expansion Ratio exceeding 70%.Open AccessDesign and Development of Complex Phase Steels with Improved Combination of Strength and Stretch-Flangeability
This study presents the design and development of a hot-rolled bainitic steel, presenting a good combination of strength and stretch-flangeability, for automotive applications. Ti, Nb, and Mo were added in the steel composition in order to control austenite grain sizes, enhance precipitation hardening, and promote the formation of bainite. This study focuses on the effect of process parameters on final microstructures and mechanical properties. These parameters are the finishing rolling temperature, which conditions the austenite microstructure before its decomposition, and the coiling temperature, which conditions the nature and morphology of the ferritic phases transformed. A preliminary study allowed to determine the austenite grain growth behavior during reheating, the recrystallization kinetics, and the continuous cooling transformation curves of the studied steel. Then, a first set of parameters was tested at a semi-industrial scale, which confirmed that the best elongation properties were obtained for homogeneous bainitic lath/granular microstructures, that can be produced by choosing a coiling temperature of 500 . When choosing those parameters for the final industrial trial, the microstructure obtained consisted of a homogeneous lath/granular bainite mixture that presented a Ultimate Tensile Strength of 830 MPa and a Hole Expansion Ratio exceeding 70%. - 1 February 2020
- Published by Elsevier in Materials Characterization
- Vol. 160, 110127
Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures
- 1 February 2020
- Published by Elsevier in Materials Characterization
- Vol. 160, 110127
Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures
- Open Access
Advanced Heat Treatments and Complex Ferritic Structures for Bearing Steels
Nanostructured bainitic steels exhibit an optimum strength/toughness combination as a consequence of their extremely fine structure. They have also demonstrated potential for wear-resistance applications. The aim of this work was to develop bearing steels by the multi-scale control of complex ferritic structures, designed using atomic transformation theory and processed by novel heat treatments. Based on the results, the new ball bearings outperformed conventional grades, approaching more expensive material options.
Open AccessAdvanced Heat Treatments and Complex Ferritic Structures for Bearing Steels
Nanostructured bainitic steels exhibit an optimum strength/toughness combination as a consequence of their extremely fine structure. They have also demonstrated potential for wear-resistance applications. The aim of this work was to develop bearing steels by the multi-scale control of complex ferritic structures, designed using atomic transformation theory and processed by novel heat treatments. Based on the results, the new ball bearings outperformed conventional grades, approaching more expensive material options.
- Open Access
Understanding Mechanical Properties of Nano-Grained Bainitic Steels from Multiscale Structural Analysis
Steel components working in extreme conditions require materials presenting the highest performances. Nowadays, nanoengineering is being applied to the development of ultra-high strength steels as a key-enabling technology in the steel sector. The present article describes the multiscale structure of nano-grained steels designed using atomic transformation theory and processed by a simple heat treatment. Outstanding mechanical properties for these novel steels are reported, and strain-hardening mechanisms are discussed.
Open AccessUnderstanding Mechanical Properties of Nano-Grained Bainitic Steels from Multiscale Structural Analysis
Steel components working in extreme conditions require materials presenting the highest performances. Nowadays, nanoengineering is being applied to the development of ultra-high strength steels as a key-enabling technology in the steel sector. The present article describes the multiscale structure of nano-grained steels designed using atomic transformation theory and processed by a simple heat treatment. Outstanding mechanical properties for these novel steels are reported, and strain-hardening mechanisms are discussed.