Kai Meng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kai Meng has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Huijing Zhao
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, No. 199 Ren’ai Road, Industrial Park, Suzhou 215123, PR China
7 shared publications - Ke-Qin Zhang
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou
5 shared publications Huijing Zhao
4 shared publications- Tuying Chen
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou, China
3 shared publications Ke-Qin Zhang
2 shared publications- Yuekun Lai
College of Chemical Engineering Fuzhou University Fuzhou China
2 shared publications
Latest Publications
- 13 December 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 338 (Pt 1) , 149595
Aloe extract-loaded cationized silk fibroin/oxidized hyaluronic acid injectable self-healing hydrogel for diabetic wound healing
- 13 December 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 338 (Pt 1) , 149595
Aloe extract-loaded cationized silk fibroin/oxidized hyaluronic acid injectable self-healing hydrogel for diabetic wound healing
- Open Access
- 1 December 2025
- Published by KEAI Publishing in Smart Materials in Medicine
- Vol. 6 (3) , 334-346
Nanofiber membrane-foam composite sheet with dual pH-responsive functions of drug release and color change
- 1 December 2025
- Published by KEAI Publishing in Smart Materials in Medicine
- Vol. 6 (3) , 334-346
Open AccessNanofiber membrane-foam composite sheet with dual pH-responsive functions of drug release and color change
- Open Access
Turning Waste into Treasure: The Full Technological Process and Product Performance Characterization of Flushable Wet Wipes Prepared from Corn Stalk
As a daily consumable, wet wipes are mostly synthetic fibers, which are incinerated or landfilled after use. The nanoplastics generated during this process will lead to environmental pollution. The application of flushable wet wipes, which are dispersible and fully degradable, is of great significance. The main raw material for flushable wipes is wood pulp, which has a long growth cycle and high cost. Corn is widely planted and has a short growth cycle. Currently most corn stalk is treated by incineration, which produces a lot of smoke that pollutes the environment. Therefore, using corn stalk as the raw material for flushable wet wipes, replacing wood pulp, is both cost-effective and environmentally friendly. In this study, aiming at industrial production, we explored the full process of producing flushable wet wipes from corn stalk to pulp board, then to the final wipes. The corn stalk was treated using alkali and a bleaching agent to obtain corn stalk pulp, which was then made into pulp board through the nonwoven wet-laid process. The optimal parameters for the alkali treatment and bleaching were obtained. The properties of the corn stalk pulp board were compared with the commercial wood pulp board. Further, we mixed the corn stalk pulp with Lyocell fiber to prepare wet-laid webs, which were then bonded using a chemical binder poloxamer. Then, the evenness of the web, mechanical properties, absorption, and dispersibility of the flushable wipes were characterized. Results showed that the pulp obtained using the optimal treatment process has a high yield and better whiteness. The properties of the corn stalk pulp board are comparable with the commercial wood pulp board, which can therefore potentially be replaced by the corn stalk board prepared in our study. The prepared flushable wet wipes had good evenness and their water absorption rate was more than 600%. The mechanical strength in dry and wet states achieved 595.94 N/m and 179.00 N/m, respectively. Most importantly, the wet wipes can completely disperse under the standardized testing method. A good balance of dispersibility and wet strength of the wet wipes was achieved.
Open AccessTurning Waste into Treasure: The Full Technological Process and Product Performance Characterization of Flushable Wet Wipes Prepared from Corn Stalk
As a daily consumable, wet wipes are mostly synthetic fibers, which are incinerated or landfilled after use. The nanoplastics generated during this process will lead to environmental pollution. The application of flushable wet wipes, which are dispersible and fully degradable, is of great significance. The main raw material for flushable wipes is wood pulp, which has a long growth cycle and high cost. Corn is widely planted and has a short growth cycle. Currently most corn stalk is treated by incineration, which produces a lot of smoke that pollutes the environment. Therefore, using corn stalk as the raw material for flushable wet wipes, replacing wood pulp, is both cost-effective and environmentally friendly. In this study, aiming at industrial production, we explored the full process of producing flushable wet wipes from corn stalk to pulp board, then to the final wipes. The corn stalk was treated using alkali and a bleaching agent to obtain corn stalk pulp, which was then made into pulp board through the nonwoven wet-laid process. The optimal parameters for the alkali treatment and bleaching were obtained. The properties of the corn stalk pulp board were compared with the commercial wood pulp board. Further, we mixed the corn stalk pulp with Lyocell fiber to prepare wet-laid webs, which were then bonded using a chemical binder poloxamer. Then, the evenness of the web, mechanical properties, absorption, and dispersibility of the flushable wipes were characterized. Results showed that the pulp obtained using the optimal treatment process has a high yield and better whiteness. The properties of the corn stalk pulp board are comparable with the commercial wood pulp board, which can therefore potentially be replaced by the corn stalk board prepared in our study. The prepared flushable wet wipes had good evenness and their water absorption rate was more than 600%. The mechanical strength in dry and wet states achieved 595.94 N/m and 179.00 N/m, respectively. Most importantly, the wet wipes can completely disperse under the standardized testing method. A good balance of dispersibility and wet strength of the wet wipes was achieved.
- Open Access
- 8 June 2023
- Published by Elsevier in Medicine in Novel Technology and Devices
- Vol. 18
Simulation and preparation of novel medium convex artificial blood vessel for reducing compliance mismatch
- 8 June 2023
- Published by Elsevier in Medicine in Novel Technology and Devices
- Vol. 18
Open AccessSimulation and preparation of novel medium convex artificial blood vessel for reducing compliance mismatch
- 10 February 2023
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 37 (9) , 1687-1696
Sustainable wheat gluten foams with self-expansion and water/blood-triggered shape recovery
A cheap and easily obtainable wheat gluten (WG) was used to fabricate bio-foams via a simple method of stirring, heating, and lyophilization. The foam possesses a 3D layered porous structure with interconnected channels, and the biofoam has excellent mechanical properties through glycerol plasticization and glutaraldehyde (GA) cross-linking. The water absorption and volume expansion rate can reach 793.67 ∼ 918.45% and 201.47 ∼ 239.53% respectively. In dry state, the foams had good compression resilience, and can basically recover its original shape after withstanding 60% compression strain for about 7 h. In wet state, they can withstand 10 cycles of compression test, and had good compressive resilience and durability; they also had fast liquid-triggered shape recovery performance, of which the foams can reabsorb liquid, expand, and recover its original shape within 40 seconds after withstanding 80% compression strain. In addition, The hemolysis rates of red blood cells treated with 1, 3, and 5 mg/mL of 14WG-20g-5GA foam suspension were 0.53 ± 0.12%, 2.12 ± 0.34%, and 3.97 ± 0.21%, respectively, all of which were below the permissible range for biological materials (<5%). The above-mentioned advantages made the sustainable foams be potentially useful for medical dressings, especially for the treatment of non-compressible haemorrhaging, which offered a new field of application for WG protein and its added value was also increased obviously.
- 10 February 2023
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 37 (9) , 1687-1696
Sustainable wheat gluten foams with self-expansion and water/blood-triggered shape recovery
A cheap and easily obtainable wheat gluten (WG) was used to fabricate bio-foams via a simple method of stirring, heating, and lyophilization. The foam possesses a 3D layered porous structure with interconnected channels, and the biofoam has excellent mechanical properties through glycerol plasticization and glutaraldehyde (GA) cross-linking. The water absorption and volume expansion rate can reach 793.67 ∼ 918.45% and 201.47 ∼ 239.53% respectively. In dry state, the foams had good compression resilience, and can basically recover its original shape after withstanding 60% compression strain for about 7 h. In wet state, they can withstand 10 cycles of compression test, and had good compressive resilience and durability; they also had fast liquid-triggered shape recovery performance, of which the foams can reabsorb liquid, expand, and recover its original shape within 40 seconds after withstanding 80% compression strain. In addition, The hemolysis rates of red blood cells treated with 1, 3, and 5 mg/mL of 14WG-20g-5GA foam suspension were 0.53 ± 0.12%, 2.12 ± 0.34%, and 3.97 ± 0.21%, respectively, all of which were below the permissible range for biological materials (<5%). The above-mentioned advantages made the sustainable foams be potentially useful for medical dressings, especially for the treatment of non-compressible haemorrhaging, which offered a new field of application for WG protein and its added value was also increased obviously.
- Open Access
Preparation of Wide-Domain pH Color-Changing Nanocapsules and Application in Hydrogel Fibers
In recent years, there has been an increase in demand for pH color-changing materials. These materials can visually communicate signals to people by connecting pH changes with color information. Embedding pH indicators into fibers to create flexible color-changing materials is an effective way to develop daily wearable products. For the stability of the indicator and the indirect contact of the indicator with the human body, it is usually necessary to encapsulate it in capsules. In this study, different pH indicators (Thymol Blue-TB, Bromocresol Green-BCG, and Bromocresol Purple-BCP) were mixed into a wide-domain pH color-changing indicator and encapsulated with ethyl cellulose (EC) by the flash nanoprecipitation (FNP) method using a new-type droplet-shaped confined impinging jet mixer. The effects of flow rate, core-to-wall ratio, and mixed solution concentration on the formation of the nanocapsules were investigated. In addition, the morphology, particle size, size distribution, dispersion stability, and encapsulation efficiency were systematically studied. At a core-to-wall ratio of 1:2, a mixed solution with a concentration of 6 mg/mL and a feed flow rate of 40 mL/min produced nanocapsules with an average particle size of 141.83 ± 0.98 nm and a PDI of 0.125 ± 0.01. Furthermore, a zeta potential with a range of −31.83 ± 0.23 mV and an encapsulation efficiency of 75.20 ± 1.72% were observed at 1:2 core-to-wall ratios. It was concluded that the color of the nanocapsules continuously changed from yellow to green and green to blue when the pH range was increased from 3 to 10. The color-changing nanocapsules were then embedded into sodium alginate hydrogel fibers, resulting in the same color-changing trend (pH 3–10) as that obtained for the nanocapsules. This study can be useful for the pH monitoring of various body fluids, such as wound exudate, urine, and sweat.
Open AccessPreparation of Wide-Domain pH Color-Changing Nanocapsules and Application in Hydrogel Fibers
In recent years, there has been an increase in demand for pH color-changing materials. These materials can visually communicate signals to people by connecting pH changes with color information. Embedding pH indicators into fibers to create flexible color-changing materials is an effective way to develop daily wearable products. For the stability of the indicator and the indirect contact of the indicator with the human body, it is usually necessary to encapsulate it in capsules. In this study, different pH indicators (Thymol Blue-TB, Bromocresol Green-BCG, and Bromocresol Purple-BCP) were mixed into a wide-domain pH color-changing indicator and encapsulated with ethyl cellulose (EC) by the flash nanoprecipitation (FNP) method using a new-type droplet-shaped confined impinging jet mixer. The effects of flow rate, core-to-wall ratio, and mixed solution concentration on the formation of the nanocapsules were investigated. In addition, the morphology, particle size, size distribution, dispersion stability, and encapsulation efficiency were systematically studied. At a core-to-wall ratio of 1:2, a mixed solution with a concentration of 6 mg/mL and a feed flow rate of 40 mL/min produced nanocapsules with an average particle size of 141.83 ± 0.98 nm and a PDI of 0.125 ± 0.01. Furthermore, a zeta potential with a range of −31.83 ± 0.23 mV and an encapsulation efficiency of 75.20 ± 1.72% were observed at 1:2 core-to-wall ratios. It was concluded that the color of the nanocapsules continuously changed from yellow to green and green to blue when the pH range was increased from 3 to 10. The color-changing nanocapsules were then embedded into sodium alginate hydrogel fibers, resulting in the same color-changing trend (pH 3–10) as that obtained for the nanocapsules. This study can be useful for the pH monitoring of various body fluids, such as wound exudate, urine, and sweat.
- Open Access
- 18 June 2022
- Published by Elsevier in Medicine in Novel Technology and Devices
- Vol. 15
Numerical simulation to study the impact of compliance mismatch between artificial and host blood vessel on hemodynamics
- 18 June 2022
- Published by Elsevier in Medicine in Novel Technology and Devices
- Vol. 15
Open AccessNumerical simulation to study the impact of compliance mismatch between artificial and host blood vessel on hemodynamics
- Open Access
- 1 January 2022
- Published by KEAI Publishing in Smart Materials in Medicine
- Vol. 3, 329-338
Sustainable wheat gluten foams used in self-expansion medical dressings
- 1 January 2022
- Published by KEAI Publishing in Smart Materials in Medicine
- Vol. 3, 329-338
Open AccessSustainable wheat gluten foams used in self-expansion medical dressings
- 7 July 2021
- Published by Wiley in Polymer International
- Vol. 70 (12) , 1741-1751
Silk fibroin/chitosan hydrogel with antibacterial, hemostatic and sustained drug‐release activities
Hydrogels are viable wound dressing materials that have gained increasing attention due to their specific physicochemical properties, biocompatibility and environmental responsiveness. In addition to keeping a wound area moist, hydrogels characterized by a porous network structure and regulated drug‐release capacity promote the various phases of wound healing by effectively loading a drug and inducing anti‐infection activity. In this study, we prepared a multifunctional hydrogel with antibacterial, hemostatic and sustained drug‐release activities by chemically crosslinking silk fibroin (SF) and chitosan (CS) biomacromolecules. Results of characterization revealed that the synthesized hydrogel presents higher swelling and in vitro degradation rates under acidic conditions than in a neutral environment. Moreover, the three‐dimensional network structure of the material and the transformation of the SF secondary structure resulted in enhanced compressive mechanical properties (maximum compressive stress of 50–130 kPa). In vitro studies of drug loading and release, antibacterial assay, cytotoxicity studies, and coagulation assay were performed. Results showed that the prepared hydrogel exhibits good bacteriostatic and hemostatic properties, and it is not toxic towards human skin fibroblasts. Therefore, the designed SF/CS hydrogel constitutes an excellent candidate material for wound dressings. © 2021 Society of Industrial Chemistry.
- 7 July 2021
- Published by Wiley in Polymer International
- Vol. 70 (12) , 1741-1751
Silk fibroin/chitosan hydrogel with antibacterial, hemostatic and sustained drug‐release activities
Hydrogels are viable wound dressing materials that have gained increasing attention due to their specific physicochemical properties, biocompatibility and environmental responsiveness. In addition to keeping a wound area moist, hydrogels characterized by a porous network structure and regulated drug‐release capacity promote the various phases of wound healing by effectively loading a drug and inducing anti‐infection activity. In this study, we prepared a multifunctional hydrogel with antibacterial, hemostatic and sustained drug‐release activities by chemically crosslinking silk fibroin (SF) and chitosan (CS) biomacromolecules. Results of characterization revealed that the synthesized hydrogel presents higher swelling and in vitro degradation rates under acidic conditions than in a neutral environment. Moreover, the three‐dimensional network structure of the material and the transformation of the SF secondary structure resulted in enhanced compressive mechanical properties (maximum compressive stress of 50–130 kPa). In vitro studies of drug loading and release, antibacterial assay, cytotoxicity studies, and coagulation assay were performed. Results showed that the prepared hydrogel exhibits good bacteriostatic and hemostatic properties, and it is not toxic towards human skin fibroblasts. Therefore, the designed SF/CS hydrogel constitutes an excellent candidate material for wound dressings. © 2021 Society of Industrial Chemistry.
- Open Access
Double-Layered Microcapsules Significantly Improve the Long-Term Effectiveness of Essential Oil
In order to improve the long-term effectiveness of essential oil, a double-layered microcapsule was prepared using the inclusion encapsulation method in this study, with β-cyclodextrin as its inner layer and chitosan and sodium alginate as its outer layer. The optimized preparation process was obtained through the response surface method. The morphology, particle size, encapsulation efficiency, thermal stability and sustained release effect of the double-layered microcapsules were characterized. The microcapsules were spherical, with a particle size distribution between 2–6 μm, and had good thermal stability within 250 °C. Their encapsulation efficiency can be up to 80%, and it can continuously release the active ingredients of the essential oil under normal temperature and high temperature conditions for a long time. In order to further examine the application effect of the double-layered microcapsule, it was loaded onto the cotton fabric by the soak-roll method. The finished cotton fabric showed excellent washability and rubbing fastness. They can still maintain a light fragrance naturally for two months. The microcapsules prepared in this study can be potentially applied in sleep aid, antibacterial, mosquito prevention, food science and other related products.
Open AccessDouble-Layered Microcapsules Significantly Improve the Long-Term Effectiveness of Essential Oil
In order to improve the long-term effectiveness of essential oil, a double-layered microcapsule was prepared using the inclusion encapsulation method in this study, with β-cyclodextrin as its inner layer and chitosan and sodium alginate as its outer layer. The optimized preparation process was obtained through the response surface method. The morphology, particle size, encapsulation efficiency, thermal stability and sustained release effect of the double-layered microcapsules were characterized. The microcapsules were spherical, with a particle size distribution between 2–6 μm, and had good thermal stability within 250 °C. Their encapsulation efficiency can be up to 80%, and it can continuously release the active ingredients of the essential oil under normal temperature and high temperature conditions for a long time. In order to further examine the application effect of the double-layered microcapsule, it was loaded onto the cotton fabric by the soak-roll method. The finished cotton fabric showed excellent washability and rubbing fastness. They can still maintain a light fragrance naturally for two months. The microcapsules prepared in this study can be potentially applied in sleep aid, antibacterial, mosquito prevention, food science and other related products.