Timo Grebner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Timo Grebner has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Christian Waldschmidt
Ulm University
32 shared publications - Christina Knill
Universität Ulm
14 shared publications - Vinzenz Janoudi
Institute of Microwave Engineering, Ulm University, Ulm, Germany
8 shared publications - Pirmin Schoeder
Institute of Microwave Engineering, Ulm University, Ulm, Germany
7 shared publications - Alexander Grathwohl
Ulm University
3 shared publications - Nicolai Kern
Ulm University
3 shared publications
Latest Publications
- Open Access
- 1 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (2) , 360-375
Sub-6$\,\text{GHz}$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios
As highly assisted and autonomous driving systems evolve, the need for detailed environmental information becomes crucial for accurate trajectory planning and safety assurance. To achieve this, sub-6$\,\text{GHz}$ vehicle-to-everything (V2X) communication signals could be leveraged for imaging purposes, merging communication and environmental sensing. However, the low center frequencies and limited bandwidths in this joint communication and sensing (JCAS) approach pose challenges for imaging performance. This article presents a method for using bandwidths across multiple communication bands, leveraging the synthetic aperture radar (SAR) principle to combine data of various measurement points and achieve high-resolution environmental images. To accomplish this, a channel sounding measurement is performed using a 1$\,\text{GHz}$ to 4$\,\text{GHz}$ linear frequency modulated (LFM) sensor system. The frequency ramp is then restricted to various subband constellations for each measurement point in the SAR processing. By randomly selecting subbands within the full ramp, the performance of random frequency hopping between measurement points is quantitatively assessed. The experimental SAR results validate the theoretical predictions and anticipated imaging characteristics. Images obtained with an effective bandwidth of 100$\,\text{MHz}$ remain comparable to those acquired using the full bandwidth. To assess its real-world applicability in an automotive scenario, the evaluations are applied to various environments, with a particular focus on a parking lot. Despite frequency hopping being restricted to defined communication bands and an effective bandwidth of approximately 100$\,\text{MHz}$, the resulting SAR image clearly shows targets such as cars, a bicycle, a wooden fence, bushes, and a person. This demonstrates the feasibility of sub-6$\,\text{GHz}$ SAR imaging under communication constraints within a JCAS context.
- 1 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (2) , 360-375
Open AccessSub-6$\,\text{GHz}$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios
As highly assisted and autonomous driving systems evolve, the need for detailed environmental information becomes crucial for accurate trajectory planning and safety assurance. To achieve this, sub-6$\,\text{GHz}$ vehicle-to-everything (V2X) communication signals could be leveraged for imaging purposes, merging communication and environmental sensing. However, the low center frequencies and limited bandwidths in this joint communication and sensing (JCAS) approach pose challenges for imaging performance. This article presents a method for using bandwidths across multiple communication bands, leveraging the synthetic aperture radar (SAR) principle to combine data of various measurement points and achieve high-resolution environmental images. To accomplish this, a channel sounding measurement is performed using a 1$\,\text{GHz}$ to 4$\,\text{GHz}$ linear frequency modulated (LFM) sensor system. The frequency ramp is then restricted to various subband constellations for each measurement point in the SAR processing. By randomly selecting subbands within the full ramp, the performance of random frequency hopping between measurement points is quantitatively assessed. The experimental SAR results validate the theoretical predictions and anticipated imaging characteristics. Images obtained with an effective bandwidth of 100$\,\text{MHz}$ remain comparable to those acquired using the full bandwidth. To assess its real-world applicability in an automotive scenario, the evaluations are applied to various environments, with a particular focus on a parking lot. Despite frequency hopping being restricted to defined communication bands and an effective bandwidth of approximately 100$\,\text{MHz}$, the resulting SAR image clearly shows targets such as cars, a bicycle, a wooden fence, bushes, and a person. This demonstrates the feasibility of sub-6$\,\text{GHz}$ SAR imaging under communication constraints within a JCAS context.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 25-32
Applications
Radars in the millimeter wave range are used today in a variety of different applications that were unthinkable ten or more years ago. Radar circuits are now available highly integrated in silicon, very robust and mass-produced assembly and interconnect technologies are available and frequency regulation allows many new applications, especially in the ISM bands. The main fields of application are briefly presented in this chapter. However, as development in the field of radar sensor technology is currently progressing very rapidly, it is hardly possible to provide a complete overview of all applications.
- 19 July 2025
- Published by Springer Nature
- p. 25-32
Open AccessApplications
Radars in the millimeter wave range are used today in a variety of different applications that were unthinkable ten or more years ago. Radar circuits are now available highly integrated in silicon, very robust and mass-produced assembly and interconnect technologies are available and frequency regulation allows many new applications, especially in the ISM bands. The main fields of application are briefly presented in this chapter. However, as development in the field of radar sensor technology is currently progressing very rapidly, it is hardly possible to provide a complete overview of all applications.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 117-131
Fundamentals of Antennas and Antenna Arrays
In many modern radar applications in the millimeter wave range, the radar must determine not only the range and velocity of a target, but also its angle at which it is located in relation to the radar. For this purpose, antenna arrays are required, i.e. a group of antennas. By evaluating and comparing the signals at different receiving antennas, the angle of incidence, i.e. the angle of the target, is determined. The larger an antenna array is in relation to the wavelength, the better its angular resolution and separation capability. For this reason, the millimeter wave range is interesting for angle estimation due to its small wavelengths. The absolute size of the sensors remains in the range of a few centimeters for most applications, even with high demands on angular resolution. While in the past, radars often employed mechanically rotating antennas with strong beam focusing to determine the angle of incidence, nowadays only electronically scanning systems are used in the millimeter wave range. Thus, a mechanical scanning system for the antenna is no longer required. The electronic approaches, known as beamforming, can be realized in both analog and digital domains. In this chapter antenna arrays are described both from the point of view of an antenna engineer and from the point of view of signal processing to show the duality and differences of both approaches. Additionally, hardware influences on array signal processing and calibration are discussed and the concept of a beamformer is presented. Finally, the achievable resolution and separability of one- and two-dimensional arrays are derived.
- 19 July 2025
- Published by Springer Nature
- p. 117-131
Open AccessFundamentals of Antennas and Antenna Arrays
In many modern radar applications in the millimeter wave range, the radar must determine not only the range and velocity of a target, but also its angle at which it is located in relation to the radar. For this purpose, antenna arrays are required, i.e. a group of antennas. By evaluating and comparing the signals at different receiving antennas, the angle of incidence, i.e. the angle of the target, is determined. The larger an antenna array is in relation to the wavelength, the better its angular resolution and separation capability. For this reason, the millimeter wave range is interesting for angle estimation due to its small wavelengths. The absolute size of the sensors remains in the range of a few centimeters for most applications, even with high demands on angular resolution. While in the past, radars often employed mechanically rotating antennas with strong beam focusing to determine the angle of incidence, nowadays only electronically scanning systems are used in the millimeter wave range. Thus, a mechanical scanning system for the antenna is no longer required. The electronic approaches, known as beamforming, can be realized in both analog and digital domains. In this chapter antenna arrays are described both from the point of view of an antenna engineer and from the point of view of signal processing to show the duality and differences of both approaches. Additionally, hardware influences on array signal processing and calibration are discussed and the concept of a beamformer is presented. Finally, the achievable resolution and separability of one- and two-dimensional arrays are derived.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 133-142
Methods for Angle Estimation
Nowadays, only digital angle estimation methods are used in modern radar sensors in the millimeter wave range. The most important approaches to digital angle estimation are therefore presented in this chapter. First, the two basic approaches to angle determination by correlation or alternatively by a Fourier transform are discussed. These two approaches have an high practical relevance, as they are used very often. These approaches are often combined with more powerful but also more complex approaches to achieve high-resolution and at the same time robust, i.e. reliable, angle estimation. Here, Bartlett and Capon Beamformer as well as MUSIC are discussed.
- 19 July 2025
- Published by Springer Nature
- p. 133-142
Open AccessMethods for Angle Estimation
Nowadays, only digital angle estimation methods are used in modern radar sensors in the millimeter wave range. The most important approaches to digital angle estimation are therefore presented in this chapter. First, the two basic approaches to angle determination by correlation or alternatively by a Fourier transform are discussed. These two approaches have an high practical relevance, as they are used very often. These approaches are often combined with more powerful but also more complex approaches to achieve high-resolution and at the same time robust, i.e. reliable, angle estimation. Here, Bartlett and Capon Beamformer as well as MUSIC are discussed.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 177-181
Hardware Effects on System Level
The implementation of a sensor in the millimeter wave range entails not only the hardware-related challenges described in Chap. 9, but also affects the overall system design. Selected topics are therefore discussed in this chapter which illustrate the impact of hardware on system level and play a crucial role in the millimeter wave range.
- 19 July 2025
- Published by Springer Nature
- p. 177-181
Open AccessHardware Effects on System Level
The implementation of a sensor in the millimeter wave range entails not only the hardware-related challenges described in Chap. 9, but also affects the overall system design. Selected topics are therefore discussed in this chapter which illustrate the impact of hardware on system level and play a crucial role in the millimeter wave range.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 213-222
Coexistence and Interference of Radar Sensors
Due to the widespread use of radar sensors in the millimeter wave range, multiple sensors are often used in close proximity or in the same application scenario. This can lead to interference between the sensors. In road traffic in particular, many vehicles are nowadays equipped with one or more radar sensors, so that in dense traffic scenarios, interference can occur between sensors on different vehicles. This chapter first presents an overview on interfered signals in radar applications and then provides a more specific description of the impact of interference on analog and digital radars. Additionally, a selection of countermeasures is presented.
- 19 July 2025
- Published by Springer Nature
- p. 213-222
Open AccessCoexistence and Interference of Radar Sensors
Due to the widespread use of radar sensors in the millimeter wave range, multiple sensors are often used in close proximity or in the same application scenario. This can lead to interference between the sensors. In road traffic in particular, many vehicles are nowadays equipped with one or more radar sensors, so that in dense traffic scenarios, interference can occur between sensors on different vehicles. This chapter first presents an overview on interfered signals in radar applications and then provides a more specific description of the impact of interference on analog and digital radars. Additionally, a selection of countermeasures is presented.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 143-160
MIMO Radars and Antenna Array Design
MIMO radars have multiple transmit and receive channels. Such multichannel radars have been used in different configurations for many decades. On the one hand, the detection probability can be increased compared to a single channel if the antenna spacing is very large and many receivers are used. The fusion of many channels leads to a lower probability of failure than a single channel if the channels have different fading characteristics. On the other hand, especially with small antenna spacings, in the range of $$\lambda /2$$ , many channels can be used for classical transmit or receive beamforming. This approach leads to so-called phased arrays. However, the MIMO systems presented in this chapter address a completely different mode of operation where the numerous channels are used to make the receive aperture appear larger than it actually is. In this context this is called a virtual aperture. Since the virtual aperture is larger than the real aperture, this approach leads to radars with an improved angular resolution. An important requirement for MIMO radars is that all transmit channels and all receive channels must be coherent, i.e. phase-locked to each other. This is the only way to create the virtual aperture, since the phase relationships between the antennas are evaluated. In addition, all transmit signals of each transmit channel must be orthogonal to each other to guarantee that the transmitted signals can be separated at the receiver. This chapter begins with an introduction of the virtual aperture and the creation of orthogonal signals. This is followed by a performance analysis of MIMO radars, along with a description of how to design and evaluate MIMO radars. Finally, the compensation of near field effects of large antenna arrays in the millimeter wave range is addressed.- 19 July 2025
- Published by Springer Nature
- p. 143-160
Open AccessMIMO Radars and Antenna Array Design
MIMO radars have multiple transmit and receive channels. Such multichannel radars have been used in different configurations for many decades. On the one hand, the detection probability can be increased compared to a single channel if the antenna spacing is very large and many receivers are used. The fusion of many channels leads to a lower probability of failure than a single channel if the channels have different fading characteristics. On the other hand, especially with small antenna spacings, in the range of $$\lambda /2$$ , many channels can be used for classical transmit or receive beamforming. This approach leads to so-called phased arrays. However, the MIMO systems presented in this chapter address a completely different mode of operation where the numerous channels are used to make the receive aperture appear larger than it actually is. In this context this is called a virtual aperture. Since the virtual aperture is larger than the real aperture, this approach leads to radars with an improved angular resolution. An important requirement for MIMO radars is that all transmit channels and all receive channels must be coherent, i.e. phase-locked to each other. This is the only way to create the virtual aperture, since the phase relationships between the antennas are evaluated. In addition, all transmit signals of each transmit channel must be orthogonal to each other to guarantee that the transmitted signals can be separated at the receiver. This chapter begins with an introduction of the virtual aperture and the creation of orthogonal signals. This is followed by a performance analysis of MIMO radars, along with a description of how to design and evaluate MIMO radars. Finally, the compensation of near field effects of large antenna arrays in the millimeter wave range is addressed. - Open Access
- 19 July 2025
- Published by Springer Nature
- p. 185-202
Radar-Based Grid Maps
In this chapter, radar-based mapping of the environment for robotic applications or for automated driving is presented. The generation of a map of the environment is the basis for a wide range of applications in the field of robotics and autonomous systems, including the planning of driving trajectories, obstacle avoidance, or finding parking spaces. Grid maps have been known since the 1980s and provide a simple and effective method for storing, processing, merging and presenting information about the environment. The two-dimensional visualization of a grid map from a bird’s eye view allows an intuitive interpretation of the maps without in-depth technical knowledge. The efficient generation of grid maps makes them a fundamental basis for a wide range of applications. Grid maps segment a map into a uniform grid, either in two-dimensional or three-dimensional space, in order to create a corresponding image of the environment. In this chapter, amplitude grid maps (AGMs) as well as probabilistic occupancy grid maps (OGMs) are presented, and compared. Subsequently, the SLAM method is presented, which enables self-localization within the global map.
- 19 July 2025
- Published by Springer Nature
- p. 185-202
Open AccessRadar-Based Grid Maps
In this chapter, radar-based mapping of the environment for robotic applications or for automated driving is presented. The generation of a map of the environment is the basis for a wide range of applications in the field of robotics and autonomous systems, including the planning of driving trajectories, obstacle avoidance, or finding parking spaces. Grid maps have been known since the 1980s and provide a simple and effective method for storing, processing, merging and presenting information about the environment. The two-dimensional visualization of a grid map from a bird’s eye view allows an intuitive interpretation of the maps without in-depth technical knowledge. The efficient generation of grid maps makes them a fundamental basis for a wide range of applications. Grid maps segment a map into a uniform grid, either in two-dimensional or three-dimensional space, in order to create a corresponding image of the environment. In this chapter, amplitude grid maps (AGMs) as well as probabilistic occupancy grid maps (OGMs) are presented, and compared. Subsequently, the SLAM method is presented, which enables self-localization within the global map.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 33-47
Resolution, Separability, Accuracy and Unambiguity of a Radar
Properties such as resolution, separability, accuracy, and unambiguity are important for describing the performance of a radar sensor. These properties are introduced and explained in this chapter. They form the basis for the following chapters, in which different implementation concepts for radar sensors are discussed.
- 19 July 2025
- Published by Springer Nature
- p. 33-47
Open AccessResolution, Separability, Accuracy and Unambiguity of a Radar
Properties such as resolution, separability, accuracy, and unambiguity are important for describing the performance of a radar sensor. These properties are introduced and explained in this chapter. They form the basis for the following chapters, in which different implementation concepts for radar sensors are discussed.
- Open Access
- 19 July 2025
- Published by Springer Nature
- p. 203-212
Synthetic Aperture Radar (SAR) for Millimeter Wave Applications
If an application requires angular resolution capabilities, radar images or environment models that have a significantly better resolution than what is possible with MIMO radars or grid mapping approaches, the principle of the synthetic aperture radar (SAR) can be utilized. In many applications in robotics and autonomous driving, very accurate environment models or radar images with resolutions in the range of a few centimeters are required. Radar images with millimeter-range resolutions are also used in automation and safety engineering applications. In all these applications, the SAR principle is used. SAR enables the generation of a synthetically enlarged aperture with high angular resolution by sequential spatial sampling the beat signal. This is done by utilizing the motion of the transmitter and receiver of a radar platform that, for example, is attached to a moving vehicle or robot and moves along a known trajectory. Alternatively, radar sensors are mounted on linear rails, for example in automation technology, so that the movement of the radar sensor allows a spatial synthesis of the aperture.SAR improves the quality of the angle estimation without using additional hardware channels.
- 19 July 2025
- Published by Springer Nature
- p. 203-212
Open AccessSynthetic Aperture Radar (SAR) for Millimeter Wave Applications
If an application requires angular resolution capabilities, radar images or environment models that have a significantly better resolution than what is possible with MIMO radars or grid mapping approaches, the principle of the synthetic aperture radar (SAR) can be utilized. In many applications in robotics and autonomous driving, very accurate environment models or radar images with resolutions in the range of a few centimeters are required. Radar images with millimeter-range resolutions are also used in automation and safety engineering applications. In all these applications, the SAR principle is used. SAR enables the generation of a synthetically enlarged aperture with high angular resolution by sequential spatial sampling the beat signal. This is done by utilizing the motion of the transmitter and receiver of a radar platform that, for example, is attached to a moving vehicle or robot and moves along a known trajectory. Alternatively, radar sensors are mounted on linear rails, for example in automation technology, so that the movement of the radar sensor allows a spatial synthesis of the aperture.SAR improves the quality of the angle estimation without using additional hardware channels.