Abdulaziz Alqahtani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdulaziz Alqahtani has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ali Aldrees
Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia
2 shared publications - Muhammad Faisal Javed
University of Tabuk
2 shared publications - Muhammad Izhar Shah
Department of Civil Engineering, COMSATS University Islamabad, Abbottabad Campus, Abbottabad 22060, Pakistan
2 shared publications Ali Aldrees
1 shared publicationCourtney Hemenway
Hemenway Groundwater Engineering, Inc, Parker, USA
1 shared publicationMichael J. Ronayne
Department of Geosciences, Colorado State University, Fort Collins, USA
1 shared publication
Latest Publications
- Open Access
- 21 January 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (3) , 1183
Comparative Assessment of Individual and Ensemble Machine Learning Models for Efficient Analysis of River Water Quality
The prediction accuracies of machine learning (ML) models may not only be dependent on the input parameters and training dataset, but also on whether an ensemble or individual learning model is selected. The present study is based on the comparison of individual supervised ML models, such as gene expression programming (GEP) and artificial neural network (ANN), with that of an ensemble learning model, i.e., random forest (RF), for predicting river water salinity in terms of electrical conductivity (EC) and dissolved solids (TDS) in the Upper Indus River basin, Pakistan. The projected models were trained and tested by using a dataset of seven input parameters chosen on the basis of significant correlation. Optimization of the ensemble RF model was achieved by producing 20 sub-models in order to choose the accurate one. The goodness-of-fit of the models was assessed through well-known statistical indicators, such as the coefficient of determination (R2), mean absolute error (MAE), root mean squared error (RMSE), and Nash–Sutcliffe efficiency (NSE). The results demonstrated a strong association between inputs and modeling outputs, where R2 value was found to be 0.96, 0.98, and 0.92 for the GEP, RF, and ANN models, respectively. The comparative performance of the proposed methods showed the relative superiority of the RF compared to GEP and ANN. Among the 20 RF sub-models, the most accurate model yielded the R2 equal to 0.941 and 0.938, with 70 and 160 numbers of corresponding estimators. The lowest RMSE values of 1.37 and 3.1 were yielded by the ensemble RF model on training and testing data, respectively. The results of the sensitivity analysis demonstrated that HCO3− is the most effective variable followed by Cl− and SO42− for both the EC and TDS. The assessment of the models on external criteria ensured the generalized results of all the aforementioned techniques. Conclusively, the outcome of the present research indicated that the RF model with selected key parameters could be prioritized for water quality assessment and management.
- 21 January 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (3) , 1183
Open AccessComparative Assessment of Individual and Ensemble Machine Learning Models for Efficient Analysis of River Water Quality
The prediction accuracies of machine learning (ML) models may not only be dependent on the input parameters and training dataset, but also on whether an ensemble or individual learning model is selected. The present study is based on the comparison of individual supervised ML models, such as gene expression programming (GEP) and artificial neural network (ANN), with that of an ensemble learning model, i.e., random forest (RF), for predicting river water salinity in terms of electrical conductivity (EC) and dissolved solids (TDS) in the Upper Indus River basin, Pakistan. The projected models were trained and tested by using a dataset of seven input parameters chosen on the basis of significant correlation. Optimization of the ensemble RF model was achieved by producing 20 sub-models in order to choose the accurate one. The goodness-of-fit of the models was assessed through well-known statistical indicators, such as the coefficient of determination (R2), mean absolute error (MAE), root mean squared error (RMSE), and Nash–Sutcliffe efficiency (NSE). The results demonstrated a strong association between inputs and modeling outputs, where R2 value was found to be 0.96, 0.98, and 0.92 for the GEP, RF, and ANN models, respectively. The comparative performance of the proposed methods showed the relative superiority of the RF compared to GEP and ANN. Among the 20 RF sub-models, the most accurate model yielded the R2 equal to 0.941 and 0.938, with 70 and 160 numbers of corresponding estimators. The lowest RMSE values of 1.37 and 3.1 were yielded by the ensemble RF model on training and testing data, respectively. The results of the sensitivity analysis demonstrated that HCO3− is the most effective variable followed by Cl− and SO42− for both the EC and TDS. The assessment of the models on external criteria ensured the generalized results of all the aforementioned techniques. Conclusively, the outcome of the present research indicated that the RF model with selected key parameters could be prioritized for water quality assessment and management.
- Open Access
- 6 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (14) , 7515
Predictive Modeling Approach for Surface Water Quality: Development and Comparison of Machine Learning Models
Water pollution is an increasing global issue that societies are facing and is threating human health, ecosystem functions and agriculture production. The distinguished features of artificial intelligence (AI) based modeling can deliver a deep insight pertaining to rising water quality concerns. The current study investigates the predictive performance of gene expression programming (GEP), artificial neural network (ANN) and linear regression model (LRM) for modeling monthly total dissolved solids (TDS) and specific conductivity (EC) in the upper Indus River at two outlet stations. In total, 30 years of historical water quality data, comprising 360 TDS and EC monthly records, were used for models training and testing. Based on a significant correlation, the TDS and EC modeling were correlated with seven input parameters. Results were evaluated using various performance measure indicators, error assessment and external criteria. The simulated outcome of the models indicated a strong association with actual data where the correlation coefficient above 0.9 was observed for both TDS and EC. Both the GEP and ANN models remained the reliable techniques in predicting TDS and EC. The formulated GEP mathematical equations depict its novelty as compared to ANN and LRM. The results of sensitivity analysis indicated the increasing trend of input variables affecting TDS as HCO3− (22.33%) > Cl− (21.66%) > Mg2+ (16.98%) > Na+ (14.55%) > Ca2+ (12.92%) > SO42− (11.55%) > pH (0%), while, in the case of EC, it followed the trend as HCO3− (42.36%) > SO42−(25.63%) > Ca2+ (13.59%) > Cl− (12.8%) > Na+ (5.01%) > pH (0.61%) > Mg2+ (0%). The parametric analysis revealed that models have incorporated the effect of all the input parameters in the modeling process. The external assessment criteria confirmed the generalized outcome and robustness of the proposed approaches. Conclusively, the outcomes of this study demonstrated that the formulation of AI based models are cost effective and helpful for river water quality assessment, management and policy making.
- 6 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (14) , 7515
Open AccessPredictive Modeling Approach for Surface Water Quality: Development and Comparison of Machine Learning Models
Water pollution is an increasing global issue that societies are facing and is threating human health, ecosystem functions and agriculture production. The distinguished features of artificial intelligence (AI) based modeling can deliver a deep insight pertaining to rising water quality concerns. The current study investigates the predictive performance of gene expression programming (GEP), artificial neural network (ANN) and linear regression model (LRM) for modeling monthly total dissolved solids (TDS) and specific conductivity (EC) in the upper Indus River at two outlet stations. In total, 30 years of historical water quality data, comprising 360 TDS and EC monthly records, were used for models training and testing. Based on a significant correlation, the TDS and EC modeling were correlated with seven input parameters. Results were evaluated using various performance measure indicators, error assessment and external criteria. The simulated outcome of the models indicated a strong association with actual data where the correlation coefficient above 0.9 was observed for both TDS and EC. Both the GEP and ANN models remained the reliable techniques in predicting TDS and EC. The formulated GEP mathematical equations depict its novelty as compared to ANN and LRM. The results of sensitivity analysis indicated the increasing trend of input variables affecting TDS as HCO3− (22.33%) > Cl− (21.66%) > Mg2+ (16.98%) > Na+ (14.55%) > Ca2+ (12.92%) > SO42− (11.55%) > pH (0%), while, in the case of EC, it followed the trend as HCO3− (42.36%) > SO42−(25.63%) > Ca2+ (13.59%) > Cl− (12.8%) > Na+ (5.01%) > pH (0.61%) > Mg2+ (0%). The parametric analysis revealed that models have incorporated the effect of all the input parameters in the modeling process. The external assessment criteria confirmed the generalized outcome and robustness of the proposed approaches. Conclusively, the outcomes of this study demonstrated that the formulation of AI based models are cost effective and helpful for river water quality assessment, management and policy making.
- 6 January 2021
- Published by Springer Nature in Water Resources Management
- Vol. 35 (2) , 429-445
Demonstration of Sustainable Development of Groundwater through Aquifer Storage and Recovery (ASR)
- 6 January 2021
- Published by Springer Nature in Water Resources Management
- Vol. 35 (2) , 429-445
Demonstration of Sustainable Development of Groundwater through Aquifer Storage and Recovery (ASR)
- 1 August 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Water Resources Planning and Management
- Vol. 146 (8) , 04020069
Optimizing Aquifer Storage and Recovery Wellfield Operations to Minimize Energy Consumption
In a world that is ever more focused on energy efficiency and climate change mitigation, minimizing energy consumption associated with pumping groundwater is a growing concern. In this study, a aquifer storage and recovery simulation-optimization model (ASRSOM) is developed to optimize aquifer storage and recovery (ASR) wellfield operations. ASRSOM combines an analytical hydraulic model and a numerical optimization model to optimize wellfield operations. The objective function used to minimize energy consumption is the temporal integral of the products of temporally varying total dynamic head values and pumping rates. Comparison of ASRSOM results with work by others for idealized aquifer operations supports the validity of ASRSOM. Four scenarios were simulated to evaluate the role that optimization of operations and aquifer recharge plays in reducing the energy required to pump groundwater out of the aquifer. The operations of a municipal ASR wellfield located in the Denver Basin, Colorado, were simulated for a 10-year period. Optimization decreased energy consumption by of power ( compared with historical scenario) and 1,541 t of atmospheric carbon. For the conditions considered, managed aquifer recharge reduced power consumption by 1%. The limited benefit of recharge is attributed to the small recharge volume in the case study, the short duration of the analysis, and the depth of water levels in the aquifer. Additional opportunities to address economic and environmental impacts associated with groundwater pumping include optimal position of wells and factors controlling total pumping head.- 1 August 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Water Resources Planning and Management
- Vol. 146 (8) , 04020069
Optimizing Aquifer Storage and Recovery Wellfield Operations to Minimize Energy Consumption
In a world that is ever more focused on energy efficiency and climate change mitigation, minimizing energy consumption associated with pumping groundwater is a growing concern. In this study, a aquifer storage and recovery simulation-optimization model (ASRSOM) is developed to optimize aquifer storage and recovery (ASR) wellfield operations. ASRSOM combines an analytical hydraulic model and a numerical optimization model to optimize wellfield operations. The objective function used to minimize energy consumption is the temporal integral of the products of temporally varying total dynamic head values and pumping rates. Comparison of ASRSOM results with work by others for idealized aquifer operations supports the validity of ASRSOM. Four scenarios were simulated to evaluate the role that optimization of operations and aquifer recharge plays in reducing the energy required to pump groundwater out of the aquifer. The operations of a municipal ASR wellfield located in the Denver Basin, Colorado, were simulated for a 10-year period. Optimization decreased energy consumption by of power ( compared with historical scenario) and 1,541 t of atmospheric carbon. For the conditions considered, managed aquifer recharge reduced power consumption by 1%. The limited benefit of recharge is attributed to the small recharge volume in the case study, the short duration of the analysis, and the depth of water levels in the aquifer. Additional opportunities to address economic and environmental impacts associated with groundwater pumping include optimal position of wells and factors controlling total pumping head.