YQYujie Qian

Yujie Qian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yujie Qian has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nonlinear regression-based method for determining the effective length of complex folded acoustic cavities for enhanced low-frequency sound absorption

    by Yujie Qian, Zhengyuan Gao, Feng Zhu, Yi Mao

    Increasingly intricate folded cavity absorbers are being proposed to minimize the thickness of metamaterials. Nevertheless, there has been scant research on determining the effective length of complex folded cavities. In this work, a new method for calculating the effective length of a complex folded cavity is established based on nonlinear regression analysis, and the effect of folding on the effective length of the cavity is evaluated. It is found that any complex folded cavity can typically be divided into multiple separate 90-degree and 180-degree folded cavities. The overall effect of folding on the entire absorber can be determined by calculating the individual fold’s actual change in effective length and then combining these changes. In addition, the actual effective length of the folded cavity is determined by using the resonant frequency obtained from the numerical simulation. The total cavity length, cross-sectional dimensions, and folding ratio of the cavity (the ratio of length before and after the folding location) are selected as variables for numerical simulation to create the data set to derive the nonlinear regression equations of the effective length of 90-degree and 180-degree folded cavities, respectively. The accuracy of the derived mathematical expressions is demonstrated through simulation verification and experimental validations.

  • Open Access

    Experimental investigation of a biomimetic propeller coupled with owl-inspired leading and trailing edges serrations

    by Yuliang Wei, Yujie Qian, Zhengguo Su, Xianyuan Xu, Deyi Kong, Junkui Zhong, Huanqin Wang

    In unmanned aerial vehicle (UAV) propulsion systems, the aerodynamic noise generated by high-speed rotating propellers presents critical challenges for both operational stealth and environmental compliance. While biomimetic designs, such as leading-edge (LE) and trailing-edge (TE) serrations, have shown promise in mitigating noise, the synergistic effects and underlying mechanisms of LE-TE coupled serrations remain poorly understood. This study proposes a bio-inspired coupled propeller (BCP) design that integrates both LE and TE serrations, demonstrating its ability to reduce noise and enhance aerodynamic performance compared to single-structure serrated designs. Using a combination of numerical simulations and experimental validation, we show that the single BCP achieves a maximum noise reduction of 3.1 dB under laboratory conditions, along with a 7.9% improvement in thrust efficiency. When implemented on a quad-rotor UAV for outdoor hovering noise measurements, BCP consistently exhibited superior noise mitigation, attaining a reduction of 2.6–3.8 dB across altitudes ranging from 3 to 12 m, outperforming both LE and TE propellers with single-structure serrations. Spectral analysis reveals that the LE-TE serration structure effectively suppresses both tonal noise at blade passing frequencies (BPF), particularly at 1 BPF, and broadband noise, especially in the range above 2 kHz. The optimized flow control in the coupled-structure design results from the complex interactions between the LE and TE serrations, which induce vortex formation, turbulent modulation, and shedding dissipation. These findings offer new insights into passive flow control mechanisms and pave the way for quieter, more efficient UAV propulsion systems, with broader implications for bio-inspired aircraft design.


  • Dual-gradient multilayer ultra-microperforated panel composite for ultra-broadband and quasi-perfect sound absorption

    by Yujie Qian, Bingxu Li, Jie Zhang

    This study proposes and experimentally validates a multilayer composite acoustic absorber based on ultra-microperforated panels with a dual-gradient configuration, incorporating decreasing pore diameters and perforation ratios across multiple layers. The innovative design achieves ultra-broadband, wide-angle, and near-perfect sound absorption, with absorption coefficients exceeding 0.98 over a wide frequency range from 2 to 20 kHz. Comprehensive performance evaluation model based on the factor Qα is established, which accounts for both the average absorption coefficient and absorption curve smoothness and demonstrates the superiority of the dual-gradient configuration compared to single-gradient or uniform designs. Simulation and experimental results reveal that the dual-gradient distribution significantly enhances acoustic impedance matching and promotes internal resonances, facilitating efficient energy dissipation. This work represents a significant advancement in the development of thin, high-performance acoustic absorbers for applications requiring broadband and wide-angle noise control.


  • Open Access

    Low-Frequency Sound Absorption Potential of Subwavelength Absorbers Based on Coupled Micro-Slit Panels

    by Yujie Qian, Zhengyuan Gao, Jie Zhang

    Due to space limitations during installation, reducing low-frequency noise has always been a challenging area. Sub-wavelength structures are typically favored in such scenarios for noise reduction. This paper explores the potential of micro-slit panels (MSP) for low-frequency sound absorption. To further optimize the panel thickness, coupled MSPs (CMSP) with a distance between two MSPs of less than 1 mm are proposed. Firstly, the low-frequency absorption performances of a single MSP based on two optimized schemes – the cavity-depth optimal scheme (COS) and the panel thickness optimal scheme (TOS) – are examined and compared with those of existing ultrathin metamaterials. The results demonstrate that MSP has significant potential for low frequency sound absorption, and COS allows for a smaller overall structural thickness but a larger panel thickness than TOS. Secondly, to reduce the panel thickness, the CMSP is developed and the theoretical model of its acoustic impedance is established and validated by experiments. Then, based on the theoretical model, the low-frequency absorption potential of CMSP is optimized using COS. The results show that both the overall thickness and the panel thickness of the CMSP absorber are reduced while maintaining better performance. Furthermore, the proposed absorber achieves a subwavelength scale since its total thickness can be as small as 0.138λ.


  • Open Access

    Heuristic Surface Path Planning Method for AMV-Assisted Internet of Underwater Things

    by Jie Zhang, Zhengxin Wang, Guangjie Han, Yujie Qian

    Ocean exploration is one of the fundamental issues for the sustainable development of human society, which is also the basis for realizing the concept of the Internet of Underwater Things (IoUT) applications, such as the smart ocean city. The collaboration of heterogeneous autonomous marine vehicles (AMVs) based on underwater wireless communication is known as a practical approach to ocean exploration, typically with the autonomous surface vehicle (ASV) and the autonomous underwater glider (AUG). However, the difference in their specifications and movements makes the following problems for collaborative work. First, when an AUG floats to a certain depth, and an ASV interacts via underwater wireless communication, the interaction has a certain time limit and their movements to an interaction position have to be synchronized; secondly, in the case where multiple AUGs are exploring underwater, the ASV needs to plan the sequence of surface interactions to ensure timely and efficient data collection. Accordingly, this paper proposes a heuristic surface path planning method for data collection with heterogeneous AMVs (HSPP-HA). The HSPP-HA optimizes the interaction schedule between ASV and multiple AUGs through a modified shuffled frog-leaping algorithm (SFLA). It applies a spatial-temporal k-means clustering in initializing the memeplex group of SFLA to adapt time-sensitive interactions by weighting their spatial and temporal proximities and adopts an adaptive convergence factor which varies by algorithm iterations to balance the local and global searches and to minimize the potential local optimum problem in each local search. Through simulations, the proposed HSPP-HA shows advantages in terms of access rate, path length and data collection rate compared to recent and classic path planning methods.


  • Full-duplex acoustic communication method for high-traffic multi-hop UACNs

    by Guang Yang, Jie Zhang, Guangjie Han, Yujie Qian

    Multi-hop underwater acoustic communication networks (UACNs) are introduced in recent years due to the growing interests of resource developments in the deep ocean. Compare to the terrestrial wireless networks, the UACNs have features of long signal propagation delay and dynamic network topology. Hence, the studies on multi-hop UACNs in recent years usually insist relaying data with dynamic and opportunistic routes to adapt the complex underwater communication structures. However, the studies are difficult to meet the high-traffic underwater applications because the data forwarding with dynamic route requires external time cost in selecting the forwarders, which results in decreasing network performance. Accordingly in this paper, we propose a design of high-speed UACNs to approach the underwater applications with high-traffic and time-critical requirements. The proposed method is based on the underwater full-duplex communication technology, and uses different interference-free channels in relaying data that enables simultaneous sending/receiving in multi-hop UACNs. Different with conventional design of UACNs, the proposed method applies the fixed routes in relaying data on the multi-hop path for the continuous and stable full-duplex communications, and integrates an elimination-based channel evaluation scheme for the route discovery of multi-channel path. Simulation results show that the proposed method has superior performances in adopting high-traffic communications compare to the classic data transmission method of UACNs.

  • Research on measurement of underwater vehicle noise with single vector hydrophone

    by He Xu, Yujie Qian, D. Y. Kong, Xiaoning Tang

    This paper focuses on the error of measuring underwater vehicle radiation noise by using a single vector hydrophone based on the waveguide environment. Firstly, the underwater vehicle and ocean waveguide environment are simulated, and then, the effects of receiving distance, sound source depth and water depth on the measurement results are studied separately based on the waveguide environment. Studies have shown that when the underwater vehicle and measuring equipment are at different distances, the sound source level error will be within 1.5dB by using a single vector hydrophone to measure the noise of underwater vehicle in the simulated measurement environment; when the underwater vehicle is located at the different depths of water, the sound source level of the wideband signal radiated by underwater vehicle is quite different; when the range of water depth from 100m to 800m, the sound source level error measured by single vector hydrophone is less than 1dB.

  • Top Cited Papers

    Cellular Clustering-Based Interference-Aware Data Transmission Protocol for Underwater Acoustic Sensor Networks

    by Jie Zhang, Mengying Cai, Guangjie Han, Yujie Qian, Lei Shu

    Recently, the development of three-dimensional interference-aware data transmission methods has attracted the attention of scholars due to the increased interest in exploiting and studying the underwater acoustic sensor networks (UASNs). In this paper, an interference aware data transmission protocol based on cellular clustering architecture is proposed. The protocol involves two steps. The first one is an inter-cell time division multiple access (TDMA) scheduling, which reduces acoustic interference by restricting simultaneous data transmission via adjacent routing paths; and the second one is an intra-cell hierarchical routing, which targets efficient data collection in the submarine and reliable data transmission from the seabed to the surface. Moreover, a novel Ekman spiral-based low-cost location prediction method and a void hole recovery scheme are adopted in each step to support the practicability of proposed protocol. Theoretical analysis and simulations indicate that the proposed protocol has advantages related to the quality of service (QoS) of UASNs because the signal interference is significantly mitigated.