WUWu-Yih Uen

Wu-Yih Uen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wu-Yih Uen has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pixel level anomaly detection in second harmonic generation microscopy for non destructive defect inspection of AlGaN/GaN heterostructures

    by Chen-Fang Kang, Chih-Chang Hung, Che-Hsuan Huang, Ting-Chuan Li, Wu-Yih Uen, Ching-Hsueh Chiu

    In this study, we present a semi-supervised inspection framework that integrates second harmonic generation (SHG) microscopy with pixel-level anomaly detection (PLAD) for high-sensitivity defect mapping in AlGaN/GaN heterostructures grown on Si (111). SHG is intrinsically sensitive to local inversion symmetry breaking and modulation of the effective second-order nonlinear susceptibility. As a result, spatial variations in the nonlinear optical response serve as a physical contrast mechanism for detecting structural inhomogeneities. The SHG-derived defect features are further supported by correlation with cathodoluminescence (CL) based R DE/NBE defect metrics. Complementary to conventional supervised object-centric detectors such as YOLOv8 and Mask R-CNN, the PLAD approach statistically models nominal lattice patterns without manual annotations. This strategy enables improved sensitivity to weak and spatially diffuse crystalline irregularities. Quantitative evaluation demonstrates substantially improved spatial overlap and detection sensitivity compared with object-based models, resolving more than 5,000 micron-scale defect-affected regions within a single field of view that are largely inaccessible to bounding-box or mask-based architectures. By bridging nonlinear optical microscopy with pixel-level anomaly modeling, the SHG-PLAD framework provides a non-contact strategy for defect-sensitive inspection and offers a useful approach for crystalline defect characterization and quality assessment in AlGaN/GaN heterostructures.

  • Open Access

    UV-sensitive MoS₂ photodetector with enhanced detectivity via graphene quantum dots heterostructures

    by Ching Hsueh Chiu, Chuan-Hsien Li Li, Yuh-Jen Cheng, Zi-Ran You, Wu-Yih Uen, Chen-Fang Kang, Chiashain Chuang, Ji-Lin Shen, Jo-Wen Ting, Chih-Chang Hung, et al.

    In this study, we report the construction of a high-performance ultraviolet (UV) photodetector (PD) based on a zero-dimensional (0D) graphene quantum dots (GQDs) / two-dimensional (2D) molybdenum disulfide (MoS2) heterojunction. First, the MoS2 crystals were prepared directly on c-plane sapphire substrates by chemical vapor deposition (CVD) technique. Then, Raman spectroscopy and atomic force microscopy (AFM) were conducted to confirm the high quality of the grown MoS2 monolayers. After that, GQDs were synthesized via pulsed laser ablation (PLA) in a cost-effective manner. Compared with the monolayer MoS2-based PD, the GQDs/monolayer MoS2-based PD exhibited 83-fold improvement in responsivity (from 9.9× 102 to 8.5 × 104 A/W) and 106-fold improvement in detectivity (from 3.4 × 1014 to 3.6 × 1016 cm × Hz1/2/W) under UV light illumination. This improved photoresponse is mainly attributed to GQDs induced interfacial charge transfer modulation and trap state engineering, which suppress deep trap mediated persistent photocurrent and facilitate more efficient carrier relaxation. In addition, the monolayer MoS2-based device displayed asymmetric kinetics with a short rise time of 0.54 s and a long fall time of 6.08 s, dominated by deep trap assisted relaxation. After GQDs decoration, the rise time extended to 1.48 s while the fall time decreased to 1.43 s, demonstrating that GQDs could effectively passivate deep traps and reshape the photogating-driven response. These findings show that the GQDs interface engineering presents a viable approach to improving UV photoresponse and tuning carrier dynamics in MoS₂ PD, paving the way for advancing UV sensing and next-generation semiconductor optoelectronic applications.

  • Modulations for Quantum Electronic Material Transports by Vacuum Annealing Methods

    by Ji-Wei Ci, Bo-Yu Chen, Yuan-Chih Hung, Huan-Chien Wang, Dung-Sheng Tsai, Wu-Yih Uen, Yuan-Liang Zhong, Jyh-Shyang Wang, Chi-Te Liang, Chiashain Chuang

    Gapless linear band structure quantum electronic materials play important roles in quantum computing developments due to their novel superb electronic transport properties and two-dimensional (2D) gateable device possibility. However, the sensitive surface of quantum electronic materials easily reacted with ambient air molecules so as to change their intrinsic transport properties. We review a series of our works to show the importance of surface reactions in quantum electronic materials, such as graphene. By using different electronic transport facilities and in situ vacuum annealing methods, we are able to gently clean the absorbed air molecules on graphene so as to change the carrier densities and the electronic transport properties, which is a great improvement for 2D-quantum material-based quantum chips and computing devices.


  • Low‐Power Photodetectors Based on PVA‐Modified Reduced Graphene Oxide Hybrid Solutions

    by Yi‐Shan Shih, Wei‐Chen Li, Jun‐Hao Shen, Shao‐Yu Chu, Wu‐Yih Uen, Hsin‐Ying Lee, Gong‐Ru Lin, Yu‐Cheng Chen, Wei‐Chen Tu

    Photodetectors based on reduced graphene oxide (rGO) have attracted much attention owing to their simple and low‐cost fabrication process. However, the aggregation and defects of rGO flakes still limit the performance of rGO photodetectors. Controlling the composition of rGO has become a vital factor for its prospective applications. For example, the interconnection between rGO and polymers for modified morphologies of rGO films leads to an enhanced performance of devices. In this work, a practical approach to engineer surface uniformity and enhance the performance of a photodetector by modifying the rGO film with hydrophilic polymers poly(vinyl alcohol) (PVA) is reported. Compared with the rGO photodetector, the on/off ratio for the PVA/rGO photodetector shows 3.5 times improvement, and the detectivity shows 53% enhancement even when the photodetector is operated at a low bias of 0.3 V. This study provides an effective route to realize PVA/rGO photodetectors with a low‐power operation which shows promising opportunities for the future development of green systems.


  • Open Access

    Camphor-Based CVD Bilayer Graphene/Si Heterostructures for Self-Powered and Broadband Photodetection

    by Dung-Sheng Tsai, Ping-Yu Chiang, Meng-Lin Tsai, Wei-Chen Tu, Chi Chen, Shih-Lun Chen, Ching-Hsueh Chiu, Chen-Yu Li, Wu-Yih Uen

    This work demonstrates a self-powered and broadband photodetector using a heterojunction formed by camphor-based chemical vaper deposition (CVD) bilayer graphene on p-Si substrates. Here, graphene/p-Si heterostructures and graphene layers serve as ultra-shallow junctions for UV absorption and zero bandgap junction materials (95% coverage bilayer and high-uniformity graphene were successfully obtained by camphor-based CVD processes. Furthermore, the carrier mobility of the camphor-based CVD bilayer graphene at room temperature is 1.8 × 103 cm2/V·s. Due to the incorporation of camphor-based CVD graphene, the graphene/p-Si Schottky junctions show a good rectification property (rectification ratio of ~110 at ± 2 V) and good performance as a self-powered (under zero bias) photodetector from UV to LWNIR. The photocurrent to dark current ratio (PDCR) value is up to 230 at 0 V under white light illumination, and the detectivity (D*) is 8 × 1012 cmHz1/2/W at 560 nm. Furthermore, the photodetector (PD) response/decay time (i.e., rise/fall time) is ~118/120 μs. These results support the camphor-based CVD bilayer graphene/Si Schottky PDs for use in self-powered and ultra-broadband light detection in the future.


  • Open Access

    White-Light Photosensors Based on Ag Nanoparticle-Reduced Graphene Oxide Hybrid Materials

    by Wei-Chen Tu, Xiang-Sheng Liu, Shih-Lun Chen, Ming-Yi Lin, Wu-Yih Uen, Yu-Cheng Chen, Yu-Chiang Chao

    The unique and outstanding electrical and optical properties of graphene make it a potential material to be used in the construction of high-performance photosensors. However, the fabrication process of a graphene photosensor is usually complicated and the size of the device also is restricted to micrometer scale. In this work, we report large-area photosensors based on reduced graphene oxide (rGO) implemented with Ag nanoparticles (AgNPs) via a simple and cost-effective method. To further optimize the performance of photosensors, the absorbance and distribution of the electrical field intensity of graphene with AgNPs was simulated using the finite-difference time-domain (FDTD) method through use of the surface plasmon resonance effect. Based on the simulated results, we constructed photosensors using rGO with 60–80 nm AgNPs and analyzed the characteristics at room temperature under white-light illumination for outdoor environment applications. The on/off ratio of the photosensor with AgNPs was improved from 1.166 to 9.699 at the bias voltage of −1.5 V, which was compared as a sample without AgNPs. The proposed photosensor affords a new strategy to construct cost-effective and large-area graphene films which raises opportunities in the field of next-generation optoelectronic devices operated in an outdoor environment.


  • Open Access

    Enhanced Performance of Mg0.1Zn0.9O UV Photodetectors Using Photoelectrochemical Treatment and Silica Nanospheres

    by Hsinying Lee, Yuchang Lin, Mengju Lee, Wuyih Uen, Kondepudy Sreenivas

    The Mg0.1Zn0.9O films were grown using atomic layer deposition (ALD) system and applied to metal‐semiconductor‐metal ultraviolet photodetectors (MSM‐UPDs) as an active layer. To suppress the dangling bonds on the Mg0.1Zn0.9O surface, the photoelectrochemical (PEC) treatment was used to passivate the Mg0.1Zn0.9O surface, which could reduce the dark current of the MSM‐UPDs about one order. Beside, to increase more incident light into the Mg0.1Zn0.9O active layer of the MSM‐UPDs, the 500‐nm‐diameter silica nanospheres were spin‐coated on the Mg0.1Zn0.9O active layer to improve the antireflection capability at the wavelength of 340 nm. The reflectivity of the Mg0.1Zn0.9O films with silica nanospheres antireflection layer decreased about 7.0% in comparison with the Mg0.1Zn0.9O films without silica nanospheres. The photocurrent and UV‐visible ratio of the passivated Mg0.1Zn0.9O MSM‐UPDs with antireflection layer were enhanced to 5.85 μA and 1.44 × 104, respectively, at the bias voltage of 5 V. Moreover, the noise equivalent power and the specific detectivity of the passivated Mg0.1Zn0.9O MSM‐UPDs with antireflection layer were decreased to 2.60 × 10−13 W and increased to 1.21 × 1012 cmHz1/2W−1, respectively, at the bias voltage of 5 V. According to the above mentions, the PEC treatment and silica nanospheres antireflection layer could effectively enhance the performance of Mg0.1Zn0.9O MSM‐UPDs.


  • Growth of γ-In2Se3 films on Si substrates by metal-organic chemical vapor deposition with different temperatures

    by Yen-Chin Huang, Zhen-Yu Li, Wu-Yih Uen, Shan-Ming Lan, K.J. Chang, Zhi-Jay Xie, J.Y. Chang, Shing-Chung Wang, Ji-Lin Shen


  • Observation of persistent photoconductivity in quaternary InGaAsP epitaxial layers

    by J L Shen, Y C Lee, G W Shu, W C Chou, W Y Uen

    We report the first observation of persistent photoconductivity (PPC) in In1−xGaxAsyP1−y epilayers. The decay behaviour of PPC is similar to that in AlxGa1−xAs and can be well described by a stretch-exponential function. The origin of PPC is discussed in terms of several models. Under the excitation-energy, temperature and alloy-composition dependence of the PPC effects, it is found the lattice relaxation of DX-like impurity is responsible for PPC in In1−xGaxAsyP1−y. Our results indicate that PPC in In1−xGaxAsyP1−y has a similar origin as that in AlxGa1−xAs. However, the decay-time constant and electron-capture barrier in In1−xGaxAsyP1−y are about 11 orders of magnitude and 46% smaller than those in AlxGa1−xAs, respectively.