FBFrancesco Bonaldi

Francesco Bonaldi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francesco Bonaldi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Gradient discretization of two-phase poro-mechanical models with discontinuous pressures at matrix fracture interfaces

    by Francesco Bonaldi, Konstantin Brenner, Jérôme Droniou, Roland Masson, Antoine Pasteau, Laurent Trenty

    We consider a two-phase Darcy flow in a fractured and deformable porous medium for which the fractures are described as a network of planar surfaces leading to so-called hybrid-dimensional models. The fractures are assumed open and filled by the fluids and small deformations with a linear elastic constitutive law are considered in the matrix. As opposed to [F. Bonaldi, K. Brenner, J. Droniou and R. Masson, Comput. Math. with Appl. 98 (2021)], the phase pressures are not assumed continuous at matrix fracture interfaces, which raises new challenges in the convergence analysis related to the additional interfacial equations and unknowns for the flow. As shown in [K. Brenner, J. Hennicker, R. Masson and P. Samier, J. Comput. Phys. 357 (2018)], [J. Aghili, K. Brenner, J. Hennicker, R. Masson and L. Trenty, GEM – Int. J. Geomath. 10, (2019)], unlike single-phase flow, discontinuous pressure models for two-phase flows provide a better accuracy than continuous pressure models even for highly permeable fractures. This is due to the fact that fractures fully filled by one phase can act as barriers for the other phase, resulting in a pressure discontinuity at the matrix fracture interface. The model is discretized using the gradient discretization method [J. Droniou, R. Eymard, T. Gallouët, C. Guichard, and R. Herbin, Springer, Mathematics & Applications, 82 (2018)], which covers a large class of conforming and non conforming schemes. This framework allows for a generic convergence analysis of the coupled model using a combination of discrete functional tools. In this work, the gradient discretization of [F. Bonaldi, K. Brenner, J. Droniou and R. Masson, Comput. Math. with Appl. 98 (2021)] is extended to the discontinuous pressure model and the convergence to a weak solution is proved. Numerical solutions provided by the continuous and discontinuous pressure models are compared on gas injection and suction test cases using a Two-Point Flux Approximation (TPFA) finite volume scheme for the flows and ℙ2 finite elements for the mechanics.


  • Open Access

    Gradient discretization of two-phase poro-mechanical models with discontinuous pressures at matrix fracture interfaces

    by Francesco Bonaldi, Konstantin Brenner, Jérôme Droniou, Roland Masson, Antoine Pasteau, Laurent Trenty

    We consider a two-phase Darcy flow in a fractured and deformable porous medium for which the fractures are described as a network of planar surfaces leading to so-called hybrid-dimensional models. The fractures are assumed open and filled by the fluids and small deformations with a linear elastic constitutive law are considered in the matrix. As opposed to [10], the phase pressures are not assumed continuous at matrix fracture interfaces, which raises new challenges in the convergence analysis related to the additional interfacial equations and unknowns for the flow. As shown in [16, 2], unlike single phase flow, discontinuous pressure models for two-phase flows provide a better accuracy than continuous pressure models even for highly permeable fractures. This is due to the fact that fractures fully filled by one phase can act as barriers for the other phase, resulting in a pressure discontinuity at the matrix fracture interface. The model is discretized using the gradient discretization method [22], which covers a large class of conforming and non conforming schemes. This framework allows for a generic convergence analysis of the coupled model using a combination of discrete functional tools. In this work, the gradient discretization of [10] is extended to the discontinuous pressure model and the convergence to a weak solution is proved. Numerical solutions provided by the continuous and discontinuous pressure models are compared on gas injection and suction test cases using a Two-Point Flux Approximation (TPFA) finite volume scheme for the flows and $P_2$ finite elements for the mechanics.

  • Open Access

    Gradient discretization of two-phase flows coupled with mechanical deformation in fractured porous media

    by Francesco Bonaldi, Konstantin Brenner, Jérôme Droniou, Roland Masson

    We consider a two-phase Darcy flow in a fractured porous medium consisting in a matrix flow coupled with a tangential flow in the fractures, described as a network of planar surfaces. This flow model is also coupled with the mechanical deformation of the matrix assuming that the fractures are open and filled by the fluids, as well as small deformations and a linear elastic constitutive law. The model is discretized using the gradient discretization method [26], which covers a large class of conforming and non conforming schemes. This framework allows for a generic convergence analysis of the coupled model using a combination of discrete functional tools. Here, we describe the model together with its numerical discretization, and we prove a convergence result assuming the non-degeneracy of the phase mobilities and that the discrete solutions remain physical in the sense that, roughly speaking, the porosity does not vanish and the fractures remain open. This is, to our knowledge, the first convergence result for this type of models taking into account two-phase flows in fractured porous media and the non-linear poromechanical coupling. Previous related works consider a linear approximation obtained for a single phase flow by freezing the fracture conductivity [36, 37]. Numerical tests employing the Two-Point Flux Approximation (TPFA) finite volume scheme for the flows and $\mathbb P_2$ finite elements for the mechanical deformation are also provided to illustrate the behavior of the solution to the model.

    • 11 November 2020
    • Published by HAL in HAL
    Open Access

    Gradient discretization of two-phase poro-mechanical models with discontinuous pressures at matrix fracture interfaces

    by Francesco Bonaldi, Konstantin Brenner, Jérôme Droniou, Roland Masson, Antoine Pasteau, Laurent Trenty

    We consider a two-phase Darcy flow in a fractured and deformable porous medium for which the fractures are described as a network of planar surfaces leading to so-called hybrid-dimensional models. The fractures are assumed open and filled by the fluids and small deformations with a linear elastic constitutive law are considered in the matrix. As opposed to [10], the phase pressures are not assumed continuous at matrix fracture interfaces, which raises new challenges in the convergence analysis related to the additional interfacial equations and unknowns for the flow. As shown in [16, 2], unlike single phase flow, discontinuous pressure models for two-phase flows provide a better accuracy than continuous pressure models even for highly permeable fractures. This is due to the fact that fractures fully filled by one phase can act as barriers for the other phase, resulting in a pressure discontinuity at the matrix fracture interface. The model is discretized using the gradient discretization method [22], which covers a large class of conforming and non conforming schemes. This framework allows for a generic convergence analysis of the coupled model using a combination of discrete functional tools. In this work, the gradient discretization of [10] is extended to the discontinuous pressure model and the convergence to a weak solution is proved. Numerical solutions provided by the continuous and discontinuous pressure models are compared on gas injection and suction test cases using a Two-Point Flux Approximation (TPFA) finite volume scheme for the flows and P2 finite elements for the mechanics.

    • 11 March 2020
    • Published by HAL in HAL
    Open Access

    The Gradient Discretisation Method for Two-phase Discrete Fracture Matrix Models in Deformable Porous Media

    by Francesco Bonaldi, Konstantin Brenner, Jerome Droniou, Roland Masson, J Droniou, Jérôme Droniou

    We consider a two-phase Darcy flow in a fractured porous medium consisting in a matrix flow coupled with a tangential flow in the fractures, described as a network of planar surfaces. This flow model is also coupled with the mechanical deformation of the matrix assuming that the fractures are open and filled by the fluids, as well as small deformations and a linear elastic constitutive law. The model is discretized using the gradient discretization method [3], which covers a large class of conforming and non conforming discretizations. This framework allows a generic convergence analysis of the coupled model using a combination of discrete functional tools. Here, we describe the model together with its numerical discretisation, and we state the convergence result, whose proof will be detailed in a forthcoming paper. This is, to our knowledge, the first convergence result for this type of models taking into account two-phase flows and the nonlinear poro-mechanical coupling. Previous related works consider a linear approximation obtained for a single phase flow by freezing the fracture conductivity [4].