Yi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yi Wang has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Shuqin Song
The Key Lab of Low‐carbon Chemistry & Energy Conservation of Guangdong Province, PCMF Laboratory, School of Chemical Engineering and Technology, School of Materials Science and Engineering Sun Yat‐Sen University Guangzhou P. R. China
21 shared publications Kun Wang
Sun Yat-sen University
9 shared publicationsRuchun Li
The Key Lab of Low-Carbon Chemistry & Energy Conservation of Guangdong Province, PCFM Lab, School of Chemical Engineering and Technology, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, China
6 shared publicationsShipeng Geng
Hebei University of Science and Technology
6 shared publicationsDandan Cai
The Key Lab of Low-Carbon Chemistry & Energy Conservation of Guangdong Province, PCFM Laboratory, School of Chemical Engineering and Technology
3 shared publicationsHaixin Chen
The Key Lab of Low-carbon Chemistry & Energy Conservation of Guangdong Province, PCFM Lab, School of Materials Science and Engineering, School of Chemical Engineering and Technology, Sun Yat-sen University, Guangzhou 510275, P.R. China
3 shared publications
Latest Publications
- 31 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Lattice-Mismatched RuNi Alloy Nanoparticles with Enhanced Bifunctional Hydrogen Electrocatalysis for Nickel-H2 Batteries
Nickel-hydrogen gas (Ni-H2) batteries exhibit ultra-long cycle life, promising excellent prospects for applications in large-scale energy storage. However, traditional Pt-based catalysts face challenges in achieving both high activity and long-term stability in alkaline media, rendering the development of electrocatalysts with enhanced performanced for both hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) a significant challenge. In this work, through a combination of rotary evaporation and thermal treatment, the optimized carbon-supported RuNi alloy nanoparticles (RuNi-1/C) have been synthesized, which enables to successfully realize a large lattice mismatch of up to 13.47%. This high lattice mismatch induces change in the interplanar spacing of Ru and Ni, thereby exposing more active sites and resulting in excellent bifunctional HER/HOR performance: it achieves an ultra-low overpotential of just 14.4 mV at a current density of 10 mA/cm2 for the HER and a high exchange current density of 2.13 mA/cm2 at an overpotential of 50 mV for the HOR. Furthermore, when employed as the bifunctional catalyst in a Ni-H2 battery, RuNi-1/C delivers a coulombic efficiency of 92% and outstanding cycling stability. This work offers a promising synthesis route toward the development of highly active and durable bifunctional catalysts by regulating the lattice mismatch.
- 31 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
Lattice-Mismatched RuNi Alloy Nanoparticles with Enhanced Bifunctional Hydrogen Electrocatalysis for Nickel-H2 Batteries
Nickel-hydrogen gas (Ni-H2) batteries exhibit ultra-long cycle life, promising excellent prospects for applications in large-scale energy storage. However, traditional Pt-based catalysts face challenges in achieving both high activity and long-term stability in alkaline media, rendering the development of electrocatalysts with enhanced performanced for both hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) a significant challenge. In this work, through a combination of rotary evaporation and thermal treatment, the optimized carbon-supported RuNi alloy nanoparticles (RuNi-1/C) have been synthesized, which enables to successfully realize a large lattice mismatch of up to 13.47%. This high lattice mismatch induces change in the interplanar spacing of Ru and Ni, thereby exposing more active sites and resulting in excellent bifunctional HER/HOR performance: it achieves an ultra-low overpotential of just 14.4 mV at a current density of 10 mA/cm2 for the HER and a high exchange current density of 2.13 mA/cm2 at an overpotential of 50 mV for the HOR. Furthermore, when employed as the bifunctional catalyst in a Ni-H2 battery, RuNi-1/C delivers a coulombic efficiency of 92% and outstanding cycling stability. This work offers a promising synthesis route toward the development of highly active and durable bifunctional catalysts by regulating the lattice mismatch.
- 22 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Main-Group Potassium-Assisted Dual-Site Relay Breaks the Activity–Stability Trade-Off in Acidic Oxygen Reduction
Fe–N–C catalysts are promising platinum-group-metal-free cathodes for proton-exchange membrane fuel cells. However, O2 activation on isolated FeN4 sites typically follows a single-center associative pathway, which limits (oxygen reduction reaction) ORR kinetics and is associated with peroxide formation and Fe demetalation under acidic operation conditions. Herein, an atomically dispersed Fe–K dual-site catalyst, FeN4–KN6/C, is reported for the first time, in which the N6-coordinated s-block K site (KN6) is introduced as a main-group auxiliary site to regulate FeN4 rather than as an isolated active center. The neighboring KN6 unit modulates the local electronic structure of FeN4 through K s/p-state-mediated perturbation, enabling bridge-type O2 activation and facilitating Fe-bound *OH desorption. Consequently, *OOH accumulation and H2O2 formation are suppressed, reactive oxygen species mediated degradation is mitigated, and Fe–N coordination is reinforced for improved Fe-site retention. FeN4–KN6/C exhibits an ORR half-wave potential of 0.850 V with a low H2O2 yield. Membrane electrode assemblies using FeN4–KN6/C cathodes deliver 47.0 mA cm–2 at 0.9 V under H2–O2 and 101 mA cm–2 at 0.8 V under H2–air conditions, with corresponding peak power densities of 1.30 W cm–2 and 0.71 W cm–2, respectively. Moreover, after 30,000 voltage cycles, the peak power density retention reaches 90.1% under H2–air and 92.3% under H2–O2 conditions. This work establishes an s-block alkali-metal-assisted Fe dual-site mechanism for acidic ORR and expands Fe-based dual-atom catalyst design beyond conventional transition-metal combinations.
- 22 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Main-Group Potassium-Assisted Dual-Site Relay Breaks the Activity–Stability Trade-Off in Acidic Oxygen Reduction
Fe–N–C catalysts are promising platinum-group-metal-free cathodes for proton-exchange membrane fuel cells. However, O2 activation on isolated FeN4 sites typically follows a single-center associative pathway, which limits (oxygen reduction reaction) ORR kinetics and is associated with peroxide formation and Fe demetalation under acidic operation conditions. Herein, an atomically dispersed Fe–K dual-site catalyst, FeN4–KN6/C, is reported for the first time, in which the N6-coordinated s-block K site (KN6) is introduced as a main-group auxiliary site to regulate FeN4 rather than as an isolated active center. The neighboring KN6 unit modulates the local electronic structure of FeN4 through K s/p-state-mediated perturbation, enabling bridge-type O2 activation and facilitating Fe-bound *OH desorption. Consequently, *OOH accumulation and H2O2 formation are suppressed, reactive oxygen species mediated degradation is mitigated, and Fe–N coordination is reinforced for improved Fe-site retention. FeN4–KN6/C exhibits an ORR half-wave potential of 0.850 V with a low H2O2 yield. Membrane electrode assemblies using FeN4–KN6/C cathodes deliver 47.0 mA cm–2 at 0.9 V under H2–O2 and 101 mA cm–2 at 0.8 V under H2–air conditions, with corresponding peak power densities of 1.30 W cm–2 and 0.71 W cm–2, respectively. Moreover, after 30,000 voltage cycles, the peak power density retention reaches 90.1% under H2–air and 92.3% under H2–O2 conditions. This work establishes an s-block alkali-metal-assisted Fe dual-site mechanism for acidic ORR and expands Fe-based dual-atom catalyst design beyond conventional transition-metal combinations.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9340-9350
Lattice Oxygen Redox Engineering in Mn/Ni-Coordinated Spinel Cobalt Oxides for Robust Acidic Oxygen Evolution
Developing highly active and durable nonprecious-metal catalysts for acidic oxygen evolution reaction (OER) is crucial for optimizing hydrogen production in proton exchange membrane water electrolysis. However, substantial challenges remain in achieving this goal. In this study, a synergistic Mn/Ni codoping strategy is proposed to fabricate a spinel-type Co2Mn0.5Ni0.5O4 (CMN) catalyst, which requires a low OER overpotential of 273 mV to reach 10 mA cm−2 and demonstrates an excellent stability for over 430 h in 0.5 M H2SO4, outperforming pristine Co3O4. This superb performance could be attributed to Mn/Ni codoping in Co3O4, which introduces structural defects, generates oxygen vacancies, and increases the Co3+/Co2+ ratio. Furthermore, differential electrochemical mass spectrometry and in situ Raman studies reveal that CMN activates an additional lattice oxygen mechanism (LOM) pathway, thus accelerating the OER rate, with quantitative analysis showing that LOM contributes approximately 22.4% to the overall reaction. Partial density of states analysis confirms that Ni effectively narrows the energy-level separation between Co 3d and O 2p orbitals, strengthens their electronic coupling, and thereby facilitates lattice oxygen activation. Additionally, Bader charge analysis confirms that Mn enhances the Mn–O bond, thereby stabilizing the crystal structure and preventing structural collapse. These findings demonstrate the potential of Mn/Ni coregulation for balancing lattice oxygen activity and structural stability in Co-based spinel catalysts.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9340-9350
Lattice Oxygen Redox Engineering in Mn/Ni-Coordinated Spinel Cobalt Oxides for Robust Acidic Oxygen Evolution
Developing highly active and durable nonprecious-metal catalysts for acidic oxygen evolution reaction (OER) is crucial for optimizing hydrogen production in proton exchange membrane water electrolysis. However, substantial challenges remain in achieving this goal. In this study, a synergistic Mn/Ni codoping strategy is proposed to fabricate a spinel-type Co2Mn0.5Ni0.5O4 (CMN) catalyst, which requires a low OER overpotential of 273 mV to reach 10 mA cm−2 and demonstrates an excellent stability for over 430 h in 0.5 M H2SO4, outperforming pristine Co3O4. This superb performance could be attributed to Mn/Ni codoping in Co3O4, which introduces structural defects, generates oxygen vacancies, and increases the Co3+/Co2+ ratio. Furthermore, differential electrochemical mass spectrometry and in situ Raman studies reveal that CMN activates an additional lattice oxygen mechanism (LOM) pathway, thus accelerating the OER rate, with quantitative analysis showing that LOM contributes approximately 22.4% to the overall reaction. Partial density of states analysis confirms that Ni effectively narrows the energy-level separation between Co 3d and O 2p orbitals, strengthens their electronic coupling, and thereby facilitates lattice oxygen activation. Additionally, Bader charge analysis confirms that Mn enhances the Mn–O bond, thereby stabilizing the crystal structure and preventing structural collapse. These findings demonstrate the potential of Mn/Ni coregulation for balancing lattice oxygen activity and structural stability in Co-based spinel catalysts.
- 2 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9223-9233
Low-Volatility and High-Stability Solvents for Stabilizing Lithium-Mediated Electrochemical Ammonia Synthesis
Lithium-mediated electrochemical ammonia synthesis (Li-MEAS) is a promising green route for ammonia production. However, the widely used tetrahydrofuran (THF)-based electrolytes exhibit intrinsic drawbacks of high volatility and poor anodic stability, which necessitate frequent and excessive electrolyte replenishment, further resulting in increased operating costs and environmental risks. Therefore, developing electrolytes with low/nonvolatility and high electrochemical stability is critical to enable lean-electrolyte operation of Li-MEAS systems. In this work, we systematically evaluated ethylene carbonate (EC)-, propylene carbonate (PC)-, and 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4])-based electrolytes for Li-MEAS. All three solvents show significantly lower volatility and higher anodic stability than the THF-based electrolyte. When employed in a Li-MEAS reactor, EC-based and PC-based electrolytes achieve Faradaic efficiencies (FE) of 83.05 and 74.76%, respectively, which are comparable to that of the THF-based benchmark electrolyte (85.91%). Owing to their low volatility, high electrochemical stability, and favorable solid electrolyte interphase (SEI) formation capability, the cyclic carbonate-based electrolytes enable stable Li-MEAS operation for over 40 min under lean-electrolyte conditions. In contrast, the [EMIM][BF4]-based electrolyte yields ammonia primarily from cation degradation rather than selective N2 reduction under the tested conditions, leading to false positive results. This study confirms the great potential of EC and PC as THF substitutes, and provides experimental insights and practical guidance for optimizing Li-MEAS electrolytes in flow reactors.
- 2 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9223-9233
Low-Volatility and High-Stability Solvents for Stabilizing Lithium-Mediated Electrochemical Ammonia Synthesis
Lithium-mediated electrochemical ammonia synthesis (Li-MEAS) is a promising green route for ammonia production. However, the widely used tetrahydrofuran (THF)-based electrolytes exhibit intrinsic drawbacks of high volatility and poor anodic stability, which necessitate frequent and excessive electrolyte replenishment, further resulting in increased operating costs and environmental risks. Therefore, developing electrolytes with low/nonvolatility and high electrochemical stability is critical to enable lean-electrolyte operation of Li-MEAS systems. In this work, we systematically evaluated ethylene carbonate (EC)-, propylene carbonate (PC)-, and 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4])-based electrolytes for Li-MEAS. All three solvents show significantly lower volatility and higher anodic stability than the THF-based electrolyte. When employed in a Li-MEAS reactor, EC-based and PC-based electrolytes achieve Faradaic efficiencies (FE) of 83.05 and 74.76%, respectively, which are comparable to that of the THF-based benchmark electrolyte (85.91%). Owing to their low volatility, high electrochemical stability, and favorable solid electrolyte interphase (SEI) formation capability, the cyclic carbonate-based electrolytes enable stable Li-MEAS operation for over 40 min under lean-electrolyte conditions. In contrast, the [EMIM][BF4]-based electrolyte yields ammonia primarily from cation degradation rather than selective N2 reduction under the tested conditions, leading to false positive results. This study confirms the great potential of EC and PC as THF substitutes, and provides experimental insights and practical guidance for optimizing Li-MEAS electrolytes in flow reactors.
- 23 April 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (18) , 8612-8625
Improved Activity and Corrosion Resistance in Seawater Oxidation: Harnessing the Synergy between the Phosphide Layer and Nickel–Iron Hydroxide
- 23 April 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (18) , 8612-8625
Improved Activity and Corrosion Resistance in Seawater Oxidation: Harnessing the Synergy between the Phosphide Layer and Nickel–Iron Hydroxide
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (49) , 33602-33613
In Situ Phase Transformation-Enabled Metal–Organic Frameworks for Efficient CO2 Electroreduction to Multicarbon Products in Strong Acidic Media
The electrochemical CO2 reduction reaction (CO2RR) has been acknowledged as a promising strategy to relieve carbon emissions by converting CO2 to essential chemicals. Despite significant progresses that have been made in neutral and alkaline media, the implementation of CO2RR in acidic conditions remains challenging due to the harsh conditions, especially in producing high-value multicarbon products. Here, we report that Cu-btca (btca = benzotriazole-5-carboxylic acid) metal-organic framework (MOF) nanostructures can act as a stable catalyst for the CO2RR in an acidic environment. The Cu-btca MOF undergoes phase transformation and morphology evolution during electrolysis, forming a stable porous Cu-btca MOF network. The resultant MOF network exhibits excellent selectivity toward ethylene and multicarbon products with Faradaic efficiencies of 51.2% and 81.9%, respectively, in a strong acidic electrolyte with a flow cell at 300 mA/cm2. Mechanism studies uncover that the Cu-btca MOF network can limit the proton reduction to suppress hydrogen evolution and maintain high local *CO concentration to promote CO2RR. Theoretical calculations suggest that two adjacent Cu sites in the Cu-btca MOF provide a favorable microenvironment for carbon-carbon coupling, facilitating the multicarbon production. This work reveals that rational structure control of MOFs can enable highly selective and efficient CO2 electroreduction to multicarbon products in strong acidic conditions toward practical applications.
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (49) , 33602-33613
In Situ Phase Transformation-Enabled Metal–Organic Frameworks for Efficient CO2 Electroreduction to Multicarbon Products in Strong Acidic Media
The electrochemical CO2 reduction reaction (CO2RR) has been acknowledged as a promising strategy to relieve carbon emissions by converting CO2 to essential chemicals. Despite significant progresses that have been made in neutral and alkaline media, the implementation of CO2RR in acidic conditions remains challenging due to the harsh conditions, especially in producing high-value multicarbon products. Here, we report that Cu-btca (btca = benzotriazole-5-carboxylic acid) metal-organic framework (MOF) nanostructures can act as a stable catalyst for the CO2RR in an acidic environment. The Cu-btca MOF undergoes phase transformation and morphology evolution during electrolysis, forming a stable porous Cu-btca MOF network. The resultant MOF network exhibits excellent selectivity toward ethylene and multicarbon products with Faradaic efficiencies of 51.2% and 81.9%, respectively, in a strong acidic electrolyte with a flow cell at 300 mA/cm2. Mechanism studies uncover that the Cu-btca MOF network can limit the proton reduction to suppress hydrogen evolution and maintain high local *CO concentration to promote CO2RR. Theoretical calculations suggest that two adjacent Cu sites in the Cu-btca MOF provide a favorable microenvironment for carbon-carbon coupling, facilitating the multicarbon production. This work reveals that rational structure control of MOFs can enable highly selective and efficient CO2 electroreduction to multicarbon products in strong acidic conditions toward practical applications.
- 7 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (39)
Rational Design of Ultrafine Pt Nanoparticles with Strong Metal‐Support Interaction for Efficient Hydrogen Evolution
Hydrogen evolution reaction (HER) plays an indispensable role in hydrogen economy. However, the development of highly active and durable Pt catalysts remains a great challenge. A homogenously‐dispersed, ultrafine and chemically anchored Pt‐based catalyst is successfully synthesized with the regulation of ‐SH groups tethered to SBA‐15 template. The ‐SH not only regulates the particle size of Pt, but also modifies the chemical environment of the carbon support by converting itself into heteroatom—S. The obtained catalyst (Pt/OMCSH) exhibits superior HER catalytic activity (15.4 mV at 10 mA cm−2; 28.4 mV dec−1; 1.0 M KOH) and stability to benchmark samples and most of the previously reported Pt‐based electrocatalysts. First‐principles calculations reveal that the presence of S in the carbon support regulates the electronic structure of Pt and strengthens the metal‐support interaction, thus boosting the reaction kinetics and enhancing the stability of Pt/OMCSH catalyst for HER.
- 7 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (39)
Rational Design of Ultrafine Pt Nanoparticles with Strong Metal‐Support Interaction for Efficient Hydrogen Evolution
Hydrogen evolution reaction (HER) plays an indispensable role in hydrogen economy. However, the development of highly active and durable Pt catalysts remains a great challenge. A homogenously‐dispersed, ultrafine and chemically anchored Pt‐based catalyst is successfully synthesized with the regulation of ‐SH groups tethered to SBA‐15 template. The ‐SH not only regulates the particle size of Pt, but also modifies the chemical environment of the carbon support by converting itself into heteroatom—S. The obtained catalyst (Pt/OMCSH) exhibits superior HER catalytic activity (15.4 mV at 10 mA cm−2; 28.4 mV dec−1; 1.0 M KOH) and stability to benchmark samples and most of the previously reported Pt‐based electrocatalysts. First‐principles calculations reveal that the presence of S in the carbon support regulates the electronic structure of Pt and strengthens the metal‐support interaction, thus boosting the reaction kinetics and enhancing the stability of Pt/OMCSH catalyst for HER.
- 14 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (38) , 45465-45474
Quasi-In Situ XPS Insights into the Surface Chemistry of Garnet-Type Li6.4La3Zr1.4Ta0.6O12 Solid-State Electrolytes: The Overlooked Impact of Pretreatments and a Direct Observation of the Formation of LiOH
Garnet-type Li6.4La3Zr1.4Ta0.6O12 (LLZTO) is a highly promising solid-state lithium metal battery electrolyte due to its exceptional ionic conductivity and electrochemical stability. However, when exposed to air, a passivation layer can be spontaneously formed on the garnet-type electrolyte, deteriorating its wettability with metallic lithium (Li) and impeding the lithium ion transfer at the Li-garnet electrolyte interface. The passivation layer is considered a critical issue for garnet-type solid electrolytes. Despite intensive research, the formation mechanism of the passivation film remains poorly understood. The key to elucidating the formation mechanism is to obtain a pristine garnet electrolyte surface and study how the pristine garnet electrolyte interacts with air. In this study, different passivation layer removal pretreatments were performed to expose pristine garnet electrolytes, and their impacts on the samples were systematically studied. The results reveal the overlooked negative impacts of vacuum annealing and acid treatment on LLZTO, which are indicated by the severe loss of Li and O and the formation of additional Li-depleted metal oxides. It was confirmed that argon annealing is the only viable approach to remove the passivation layer without introducing concomitant contaminations to LLZTO. Based on this method, we directly evidenced the formation of LiOH on LLZTO under rarefied air using quasi-in situ X-ray photoelectron spectroscopy. It was confirmed that the loss of Li and O ions, rather than Li+/H+ exchange, drives the formation of LiOH in the passivation layer. These results not only provide a better understanding of the surface and interface chemistry of LLZTO but also reveal a reliable surface treatment for the LLZTO sample.
- 14 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (38) , 45465-45474
Quasi-In Situ XPS Insights into the Surface Chemistry of Garnet-Type Li6.4La3Zr1.4Ta0.6O12 Solid-State Electrolytes: The Overlooked Impact of Pretreatments and a Direct Observation of the Formation of LiOH
Garnet-type Li6.4La3Zr1.4Ta0.6O12 (LLZTO) is a highly promising solid-state lithium metal battery electrolyte due to its exceptional ionic conductivity and electrochemical stability. However, when exposed to air, a passivation layer can be spontaneously formed on the garnet-type electrolyte, deteriorating its wettability with metallic lithium (Li) and impeding the lithium ion transfer at the Li-garnet electrolyte interface. The passivation layer is considered a critical issue for garnet-type solid electrolytes. Despite intensive research, the formation mechanism of the passivation film remains poorly understood. The key to elucidating the formation mechanism is to obtain a pristine garnet electrolyte surface and study how the pristine garnet electrolyte interacts with air. In this study, different passivation layer removal pretreatments were performed to expose pristine garnet electrolytes, and their impacts on the samples were systematically studied. The results reveal the overlooked negative impacts of vacuum annealing and acid treatment on LLZTO, which are indicated by the severe loss of Li and O and the formation of additional Li-depleted metal oxides. It was confirmed that argon annealing is the only viable approach to remove the passivation layer without introducing concomitant contaminations to LLZTO. Based on this method, we directly evidenced the formation of LiOH on LLZTO under rarefied air using quasi-in situ X-ray photoelectron spectroscopy. It was confirmed that the loss of Li and O ions, rather than Li+/H+ exchange, drives the formation of LiOH in the passivation layer. These results not only provide a better understanding of the surface and interface chemistry of LLZTO but also reveal a reliable surface treatment for the LLZTO sample.
- 19 July 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 650 (Pt B) , 1715-1724
Ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites accelerating alkaline H2O dissociation for efficient hydrogen evolution
- 19 July 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 650 (Pt B) , 1715-1724
Ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites accelerating alkaline H2O dissociation for efficient hydrogen evolution