DBDong-Hyun Baek

Dong-Hyun Baek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dong-Hyun Baek has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simple Process for Flexible Light-Extracting QD Film and White OLED

    by Eun Jeong Bae, Tae Jeong Hwang, Geun Su Choi, Yong-Min Lee, Byeong-Kwon Ju, Young Wook Park, Dong-Hyun Baek

    Quantum dots (QDs) have tremendous potential for next-generation displays due to their high color purity, photoluminescence efficiency, and power efficiency. In this work, we present a simple and cost-effective method for fabricating flexible single- and multiple-layer films, and they can be detached and attached to the outside of OLEDs as a light-scattering and color-conversion layer. Light extraction efficiency is enhanced by forming low-density structures by using the reactive ion etching (RIE) process. As a result, the QD/PDMS composite film allowed for color conversion and achieved an excellent light extraction efficiency of up to 9.2%. Furthermore, the QD/PDMS composite film and greenish-blue OLED produced white light (CIEx,y = 0.28, 0.41), demonstrating the potential for application in broad areas, from flexible displays to lighting. The method provides a simple and cost-effective alternative to conventional processes.

  • Open Access

    Fabrication of Flexible PDMS Films with Micro-Convex Structure for Light Extraction from Organic Light-Emitting Diodes

    by Eun-Jeong Bae, Yeon-Sik Kim, Geun-Su Choi, Byeong-Kwon Ju, Dong-Hyun Baek, Young-Wook Park

    In this study, we demonstrated organic light-emitting diodes (OLEDs) outcoupling with a flexible polydimethylsiloxane (PDMS) film with a micro-convex structure using the breath figure (BF) method. We can easily control the micro-convex pattern by adjusting the concentration of polystyrene and the humidity during the BF process. As process conditions to fabricate the micro-convex structure, polymer concentrations of 10, 20, 40, and 80 mg/mL and 60, 70, and 80% relative humidity were used. To evaluate the optical properties, we analyzed the transmission, diffusion, and electroluminescence with or without the micro-convex structure on the OLEDs. The shape and density of the micro-convex structure are related to its optical properties and outcoupling and we have experimentally demonstrated this. By applying a micro-convex structure, it achieved up to a 42% improvement in the external quantum efficiency compared to bare OLEDs (without any light extraction film). We expect the fabricated flexible light extraction film to be effective for outcoupling and applicable to flexible devices.


  • Open Access

    Micro-Sphere PDMS for Enhancing Light Extraction in Organic Light-Emitting Devices

    by Eun-Jeong Bae, Hyeong-Kyu Maeng, Ji-Soo Shin, Dong-Wook Park, Young-Wook Park, Dong-Hyun Baek

    We present a micro-sphere PDMS film to improve the external quantum efficiency (EQE) in OLEDs. The micro-sphere PDMS film was fabricated with the breath figure (BF) and replica molding process. The polymer template was prepared through stabilization of the water droplets at the polymer/water interface. The micro-sphere PDMS film was fabricated by pouring PDMS on the polymer template. At a 45 mg/mL concentration, the size of the spheres was approximately 12.3 µm and they had the most circular shape, so this condition yielded the best performance, with an improvement of 33% in the EQE and the widest viewing angle ranging from 0° to 50°. As a result, the sphere film’s size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.


  • Open Access

    A Simple Method for Fabricating an External Light Extraction Composite Layer with RNS to Improve the Optical Properties of OLEDs

    by Geun-Su Choi, Shin-Woo Kang, Eun-Jeong Bae, Eun-Bi Jang, Dong-Hyun Baek, Byeong-Kwon Ju, Young-Wook Park

    In this study, we fabricated a random nanostructure (RNS) external light extraction composite layer containing high-refractive-index nanoparticles through a simple and inexpensive solution process and a low-temperature mask-free process. We focused on varying the shape and density of the RNSs and adjusted the concentration of the high-refractive-index nanoparticles to control the optical properties. The RNSs fabricated using a low-temperature mask-free process can use the distance between the nanostructures and various forms to control the diffraction and scattering effects in the visible light wavelength range. Consequently, our film exhibited a direct transmittance of ~85% at a wavelength of 550 nm. Furthermore, when the RNSs’ composite film, manufactured using the low-temperature mask-free process, was applied to organic light-emitting diodes (OLEDs), it exhibited an external quantum efficiency improvement of 32.2% compared with the OLEDs without the RNSs. Therefore, the randomly distributed high-refractive-index nanoparticles on the polymer film can reduce the waveguide mode and total reflection at the substrate/air interface. These films can be used as a scattering layer to reduce the loss of the OLED substrate mode.


  • Open Access

    Enhanced Light Extraction from Organic Light-Emitting Diodes with Micro-Nano Hybrid Structure

    by Eun-Jeong Bae, Shin-Woo Kang, Geun-Su Choi, Eun-Bi Jang, Dong-Hyun Baek, Byeong-Kwon Ju, Young-Wook Park

    In this study, an external light extraction layer with a micro-nano hybrid structure was applied to improve the external light extraction efficiency of organic light-emitting diodes (OLEDs). A reactive ion-etching (RIE) process, using O2 and CHF3 plasma, was performed on the surface of the micro-scale pattern to form micro-nano hybrid structures. According to the results of this study, the nanostructures formed by the treatment of O2 and CHF3 were different, and the efficiency according to the structures was analyzed experimentally and theoretically. As a result, the OLED, to which the micro-nano hybrid structure, manufactured through a simple process, is applied, improved the external light extraction efficiency by up to 38%, and an extended viewing angle profile was obtained. Additionally, an effective method for enhancing the out-coupling efficiency of OLEDs was presented by optimizing the micro-nano hybrid structure according to process conditions.


  • Open Access

    Raman Scattering Study on the Influence of E-Beam Bombardment on Si Electron Lens

    by Geon-Woo Lee, Young-Bok Lee, Dong-Hyun Baek, Jung-Gon Kim, Ho-Seob Kim

    Microcolumns have a stacked structure composed of an electron emitter, electron lens (source lens), einzel lens, and a deflector manufactured using a micro electro-mechanical system process. The electrons emitted from the tungsten field emitter mostly pass through the aperture holes. However, other electrons fail to pass through because of collisions around the aperture hole. We used Raman scattering measurements and X-ray photoelectron spectroscopy analyses to investigate the influence of electron beam bombardment on a Si electron lens irradiated by acceleration voltages of 0, 20, and 30 keV. We confirmed that the crystallinity was degraded, and carbon-related contamination was detected at the surface and edge of the aperture hole of the Si electron lens after electron bombardment for 24 h. Carbon-related contamination on the surface of the Si electron lens was verified by analyzing the Raman spectra of the carbon-deposited Si substrate using DC sputtering and a carbon rod sample. We report the crystallinity and the origin of the carbon-related contamination of electron Si lenses after electron beam bombardment by non-destructive Raman scattering and XPS analysis methods.


  • Open Access

    Effect of Viscosity on the Formation of Porous Polydimethylsiloxane for Wearable Device Applications

    by Dong-Hyun Baek, Hachul Jung, Jeong Hun Kim, Young Wook Park, Dae Wook Kim, Ho Seob Kim, Seungjoon Ahn, Young-Jin Kim

    Medical devices, which enhance the quality of life, have experienced a gradual increase in demand. Various research groups have attempted to incorporate soft materials such as skin into wearable devices. We developed a stretchable substrate with high elasticity by forming a porous structure on polydimethylsiloxane (PDMS). To optimize the porous structure, we propose a manufacturing process that utilizes a high-pressure steam with different viscosities (400, 800, 2100, and 3000 cP) of an uncured PDMS solution. The proposed method simplifies the manufacturing of porous structures and is cost-effective compared to other technologies. Porous structures of various viscosities were formed, and their electrical and mechanical properties evaluated. Porous PDMS (3000 cP) was formed in a sponge-like three-dimensional porous structure, compared to PDMS formed by other viscosities. The elongation of porous PDMS (3000 cP) was increased by up to 30%, and the relative resistance changed to less than 1000 times with the maximum strain test. The relative resistance increased the initial resistance (R0) by approximately 10 times during the 1500-times repeated cycling tests with 30% strain. As a result, patch-type wearable devices based on soft materials can provide an innovative platform that can connect with the human skin for robotics applications and for continuous health monitoring.