Artem Sopilniak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Artem Sopilniak has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Pereginets
Academy of Construction of Ukraine
2 shared publications - Mykola Savytskyi
Ukrainian State University of Science and Technologies
2 shared publications - Victor Kolokhov
Ukrainian State University of Science and Technologies Educational and Scientific Institute "Prydniprovska State Academy of Civil Engineering and Architecture
2 shared publications - Yevhenii Yurchenko
Ukrainian State University of Science and Technologies
2 shared publications - Grygorii Gasii
National Aviation University
1 shared publication - Kostiantyn Dikarev
Prydniprovs’ka State Academy of Civil Engineering and Architecture
1 shared publication
Latest Publications
- 16 November 2026
- Published by Lviv Polytechnic National University in Theory and Building Practice
- Vol. 8 (2) , 18-26
METHOD FOR QUANTITATIVE ASSESSMENT OF LOCAL DEFORMATION ZONES OF A BRICK FACADE FROM TERRESTRIAL LASER SCANNING DATA
Design documentation for old buildings has largely been lost, so the facade slope measured by terrestrial laser scanning cannot be separated into initial construction deviation, accumulated deformation and local damage. A procedure of internal geometric referencing of point clouds is proposed for assessing local deformations of brick facades without design documentation. Lines in undamaged masonry of the same facade form the reference, and the slope of the studied zones is expressed as a dimensionless localisation coefficient, a multiple of the background level. On a two-storey brick building, the background level was 2.79 mm/m against 28.32–32.01 mm/m in zones adjacent to masonry discontinuities, i.e. a coefficient of 10.1–11.5. For this object, the classification remained stable under the adopted error assumptions. The procedure helps prioritise zones for subsequent opening-up inspection.
- 16 November 2026
- Published by Lviv Polytechnic National University in Theory and Building Practice
- Vol. 8 (2) , 18-26
METHOD FOR QUANTITATIVE ASSESSMENT OF LOCAL DEFORMATION ZONES OF A BRICK FACADE FROM TERRESTRIAL LASER SCANNING DATA
Design documentation for old buildings has largely been lost, so the facade slope measured by terrestrial laser scanning cannot be separated into initial construction deviation, accumulated deformation and local damage. A procedure of internal geometric referencing of point clouds is proposed for assessing local deformations of brick facades without design documentation. Lines in undamaged masonry of the same facade form the reference, and the slope of the studied zones is expressed as a dimensionless localisation coefficient, a multiple of the background level. On a two-storey brick building, the background level was 2.79 mm/m against 28.32–32.01 mm/m in zones adjacent to masonry discontinuities, i.e. a coefficient of 10.1–11.5. For this object, the classification remained stable under the adopted error assumptions. The procedure helps prioritise zones for subsequent opening-up inspection.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
Study of the stress-strain state of floor structures manufactured by construction 3D printing
This paper presents the results of experimental studies of floor slab structures fabricated using construction 3D printing technology, with an emphasis on the specifics of their manufacturing and reinforcement. The current state of development of construction 3D printing technology is summarized, particularly in terms of materials and research directions. The main scientific approaches in this field are highlighted, the materials used are analyzed, and existing reinforcement concepts applicable to 3D-printed structures are considered. A beam-type structural element in the form of a planar truss is proposed, which improves material efficiency and reduces self-weight. The paper also describes the manufacturing process of specimens using a gantry-type 3D printer with a concrete mixture and conventional reinforcement with steel bars, which was integrated into the printing process by manual placement between layers. The methodology and results of experimental tests to determine the load-bearing capacity of the specimens are presented. The characteristic stages of structural behavior are identified, including crack initiation, crack propagation, and failure, as well as the zones of crack localization. The presence of a load-bearing capacity reserve after crack initiation up to ultimate failure is observed, along with the overall stability of the experimental results. The obtained results confirm the effectiveness of the proposed structural solution and the feasibility of using conventional reinforcement methods in structures produced by additive manufacturing technologies. Furthermore, the obtained data can be used for further structural calculations and for predicting structural behavior under varying initial design parameters. This work is of practical importance for the development of construction 3D printing technologies and their application in the restoration of structures damaged due to the full-scale aggression of the russian federation.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
Open AccessStudy of the stress-strain state of floor structures manufactured by construction 3D printing
This paper presents the results of experimental studies of floor slab structures fabricated using construction 3D printing technology, with an emphasis on the specifics of their manufacturing and reinforcement. The current state of development of construction 3D printing technology is summarized, particularly in terms of materials and research directions. The main scientific approaches in this field are highlighted, the materials used are analyzed, and existing reinforcement concepts applicable to 3D-printed structures are considered. A beam-type structural element in the form of a planar truss is proposed, which improves material efficiency and reduces self-weight. The paper also describes the manufacturing process of specimens using a gantry-type 3D printer with a concrete mixture and conventional reinforcement with steel bars, which was integrated into the printing process by manual placement between layers. The methodology and results of experimental tests to determine the load-bearing capacity of the specimens are presented. The characteristic stages of structural behavior are identified, including crack initiation, crack propagation, and failure, as well as the zones of crack localization. The presence of a load-bearing capacity reserve after crack initiation up to ultimate failure is observed, along with the overall stability of the experimental results. The obtained results confirm the effectiveness of the proposed structural solution and the feasibility of using conventional reinforcement methods in structures produced by additive manufacturing technologies. Furthermore, the obtained data can be used for further structural calculations and for predicting structural behavior under varying initial design parameters. This work is of practical importance for the development of construction 3D printing technologies and their application in the restoration of structures damaged due to the full-scale aggression of the russian federation.
- Open Access
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 14
INSTITUTIONAL AND BEHAVIORAL ASPECTS OF INCREASING ENERGY EFFICIENCY IN CONSTRUCTION PROCESSES
The article examines a complex of institutional and behavioral aspects that affect the increase in energy efficiency in construction production processes. Based on a systematic analysis of modern scientific sources, practices of European countries and the results of the author's content analysis of interviews with representatives of Ukrainian construction companies, key barriers and drivers of the implementation of energy-efficient solutions at construction sites were identified. It was found that, despite the availability of technical solutions and the potential for reducing energy consumption in the process of construction and installation work, domestic practice is characterized by a low level of institutional consolidation of energy saving, limited motivation of construction participants, lack of internal standards and control. Particular attention is paid to the analysis of behavioral models of participants in the construction process, including foremen, engineers and project managers. A significant impact of corporate culture, leadership and social practices (e.g. internal competitions for reducing energy consumption) on the level of efficiency was revealed. It was established that institutional support from management, the availability of energy checklists, energy consumption accounting and tracking systems, as well as internal transparency and competition can become effective mechanisms for increasing the energy efficiency of construction production. The article proposes a classification of typical barriers (financial, informational, organizational, regulatory, technological) and drivers (leadership, internal motivation, customer support, participation in certification programs) that should be taken into account when designing a sustainable construction policy. Practical recommendations are developed for integrating energy efficiency into construction production management systems in Ukraine, in particular through the creation of internal energy monitoring procedures, training programs for employees, digital templates and databases, strengthening tender requirements, as well as stimulating a culture of responsible energy consumption. Thus, the article substantiates that it is the combination of institutional changes and the transformation of behavioral practices that is critically important for ensuring energy efficiency at all stages of the construction process in the context of the transition to climate-neutral construction.
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 14
Open AccessINSTITUTIONAL AND BEHAVIORAL ASPECTS OF INCREASING ENERGY EFFICIENCY IN CONSTRUCTION PROCESSES
The article examines a complex of institutional and behavioral aspects that affect the increase in energy efficiency in construction production processes. Based on a systematic analysis of modern scientific sources, practices of European countries and the results of the author's content analysis of interviews with representatives of Ukrainian construction companies, key barriers and drivers of the implementation of energy-efficient solutions at construction sites were identified. It was found that, despite the availability of technical solutions and the potential for reducing energy consumption in the process of construction and installation work, domestic practice is characterized by a low level of institutional consolidation of energy saving, limited motivation of construction participants, lack of internal standards and control. Particular attention is paid to the analysis of behavioral models of participants in the construction process, including foremen, engineers and project managers. A significant impact of corporate culture, leadership and social practices (e.g. internal competitions for reducing energy consumption) on the level of efficiency was revealed. It was established that institutional support from management, the availability of energy checklists, energy consumption accounting and tracking systems, as well as internal transparency and competition can become effective mechanisms for increasing the energy efficiency of construction production. The article proposes a classification of typical barriers (financial, informational, organizational, regulatory, technological) and drivers (leadership, internal motivation, customer support, participation in certification programs) that should be taken into account when designing a sustainable construction policy. Practical recommendations are developed for integrating energy efficiency into construction production management systems in Ukraine, in particular through the creation of internal energy monitoring procedures, training programs for employees, digital templates and databases, strengthening tender requirements, as well as stimulating a culture of responsible energy consumption. Thus, the article substantiates that it is the combination of institutional changes and the transformation of behavioral practices that is critically important for ensuring energy efficiency at all stages of the construction process in the context of the transition to climate-neutral construction.
- Open Access
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Current problems of architecture and urban planning
- No. 74
Methodology of organizing logistics systems of reconstruction facilities on the basis of specialized mobile mechanized columns
This scientific work reveals the essence of logistics systems, their classification and role in crisis situations during the implementation of infrastructure and housing restoration projects. The use of the structure of specialized mobile mechanized columns (SMMC) proved to be an effective tool in organizing: logistical support; ensuring timely delivery of materials; performing dismantling, construction work and coordinating actions in the destruction zone. Scientific, theoretical and applied research on logistics systems by Ukrainian and foreign scientists on this topic was analyzed. Particular attention was paid to the use of military techniques in the deployment of the repair and construction front, in particular a hierarchical structure similar to a military brigade. This ensures a clear division of functions between units and their interaction with the column headquarters. A management model adapted to the command style of the construction industry is proposed, in which the headquarters acts as a central coordinator, and the units perform specialized tasks (engineering, transport, logistics, security). The effectiveness of integrating aerial reconnaissance for immediate planning of the construction mission and monitoring is analyzed. Aerial reconnaissance is used to create three-dimensional maps of the terrain, determine the extent of damage, and optimize transportation routes. This allows you to significantly reduce time and resource costs and increase the accuracy of task performance. This work provides model examples of the use of logistics systems based on the SMMC, which demonstrate their effectiveness in ensuring the timely delivery of resources, dismantling destroyed facilities, waste disposal, and construction of new facilities. The interaction of the SMMC units is studied, where each structural element performs a specific role, and the headquarters coordinates their activities, ensuring the integration of all processes into a single logistics chain. Thus, the approach to organizing logistics systems based on the SPMC has shown high efficiency in the context of housing and infrastructure restoration. The integration of military management principles allows you to create an adaptive system that can quickly respond to changes, optimize the use of resources and ensure cost minimization while maintaining high quality task performance.
- 24 September 2025
- Published by Kyiv National University of Construction and Architecture in Current problems of architecture and urban planning
- No. 74
Open AccessMethodology of organizing logistics systems of reconstruction facilities on the basis of specialized mobile mechanized columns
This scientific work reveals the essence of logistics systems, their classification and role in crisis situations during the implementation of infrastructure and housing restoration projects. The use of the structure of specialized mobile mechanized columns (SMMC) proved to be an effective tool in organizing: logistical support; ensuring timely delivery of materials; performing dismantling, construction work and coordinating actions in the destruction zone. Scientific, theoretical and applied research on logistics systems by Ukrainian and foreign scientists on this topic was analyzed. Particular attention was paid to the use of military techniques in the deployment of the repair and construction front, in particular a hierarchical structure similar to a military brigade. This ensures a clear division of functions between units and their interaction with the column headquarters. A management model adapted to the command style of the construction industry is proposed, in which the headquarters acts as a central coordinator, and the units perform specialized tasks (engineering, transport, logistics, security). The effectiveness of integrating aerial reconnaissance for immediate planning of the construction mission and monitoring is analyzed. Aerial reconnaissance is used to create three-dimensional maps of the terrain, determine the extent of damage, and optimize transportation routes. This allows you to significantly reduce time and resource costs and increase the accuracy of task performance. This work provides model examples of the use of logistics systems based on the SMMC, which demonstrate their effectiveness in ensuring the timely delivery of resources, dismantling destroyed facilities, waste disposal, and construction of new facilities. The interaction of the SMMC units is studied, where each structural element performs a specific role, and the headquarters coordinates their activities, ensuring the integration of all processes into a single logistics chain. Thus, the approach to organizing logistics systems based on the SPMC has shown high efficiency in the context of housing and infrastructure restoration. The integration of military management principles allows you to create an adaptive system that can quickly respond to changes, optimize the use of resources and ensure cost minimization while maintaining high quality task performance.
- Open Access
- 30 June 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Scientific Bulletin of Civil Engineering
- No. 112,p. 286-293
ЕКОЛОГІЧНО СТІЙКІ ГІБРИДНІ СИСТЕМИ ДЛЯ СУЧАСНОГО БУДІВНИЦТВА
The article addresses the issue of implementing environmentally sustainable technologies in modern construction, considering the context of global climate change, natural resource scarcity, and the significant amount of construction waste generated due to military aggression against Ukraine. The authors propose an innovative approach to developing resource-efficient hybrid timber-concrete architectural and structural systems based on the use of prefabricated elements from industrial production. These systems are designed for the construction of multi-story buildings with various functional purposes, such as residential, public, educational, and social facilities. The main focus of the research is the combination of properties of different materials, particularly timber as a natural renewable resource and concrete with recycled aggregates, which helps reduce the environmental impact of the construction. The use of secondary raw materials obtained from construction waste promotes the creation of a closed lifecycle for construction products and reduces waste volumes. A distinctive feature of the proposed system is its adaptability to various architectural and planning solutions. The use of prefabricated elements ensures high-speed assembly, geometric precision, and the ability to construct buildings under various conditions. The authors provide recommendations for designing buildings using the proposed system, particularly for educational institutions, youth centers, and residential buildings. The system was tested through the development of an architectural and planning solution for a multifunctional youth center. The project incorporates modern architectural solutions, such as glass facades that provide natural lighting and energy efficiency, as well as the integration of safety capsules to protect the population in case of emergencies. The research results confirm the effectiveness of the proposed hybrid system for modern construction, aligning with the requirements of sustainable development and environmental standards. The implementation of such technologies will contribute to the efficient reconstruction of Ukraine's infrastructure, reduction of construction waste, and the creation of a comfortable and safe environment.
- 30 June 2025
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Scientific Bulletin of Civil Engineering
- No. 112,p. 286-293
Open AccessЕКОЛОГІЧНО СТІЙКІ ГІБРИДНІ СИСТЕМИ ДЛЯ СУЧАСНОГО БУДІВНИЦТВА
The article addresses the issue of implementing environmentally sustainable technologies in modern construction, considering the context of global climate change, natural resource scarcity, and the significant amount of construction waste generated due to military aggression against Ukraine. The authors propose an innovative approach to developing resource-efficient hybrid timber-concrete architectural and structural systems based on the use of prefabricated elements from industrial production. These systems are designed for the construction of multi-story buildings with various functional purposes, such as residential, public, educational, and social facilities. The main focus of the research is the combination of properties of different materials, particularly timber as a natural renewable resource and concrete with recycled aggregates, which helps reduce the environmental impact of the construction. The use of secondary raw materials obtained from construction waste promotes the creation of a closed lifecycle for construction products and reduces waste volumes. A distinctive feature of the proposed system is its adaptability to various architectural and planning solutions. The use of prefabricated elements ensures high-speed assembly, geometric precision, and the ability to construct buildings under various conditions. The authors provide recommendations for designing buildings using the proposed system, particularly for educational institutions, youth centers, and residential buildings. The system was tested through the development of an architectural and planning solution for a multifunctional youth center. The project incorporates modern architectural solutions, such as glass facades that provide natural lighting and energy efficiency, as well as the integration of safety capsules to protect the population in case of emergencies. The research results confirm the effectiveness of the proposed hybrid system for modern construction, aligning with the requirements of sustainable development and environmental standards. The implementation of such technologies will contribute to the efficient reconstruction of Ukraine's infrastructure, reduction of construction waste, and the creation of a comfortable and safe environment.
- 1 April 2021
- Published by Technical University of Moldova in Journal of Engineering Science
- Vol. 28 (1)
STRESS - STRAIN STATE OF THE LOCAL AREA IN THE BUILDING ELEMENT WITH STRUCTURAL DEFECT
Evaluation of the building element technical state relies on verification calculations using estimated construction material properties. Physical and mechanical properties are estimated predominately by using non-destructive test methods. The accuracy of these methods is affected by the level of stress-strain state of the structural element and present structural defects. The variability of the concrete properties over time under constant loads is a determining factor for the durability and reliability of the structural element. The influence of the physical and mechanical characteristics of a construction material on the deformation process of the local area of the structural element adjacent to the structural defect has been investigated. The research has been performed on structural models using software systems "LIRA SAPR" and "SOLIDWORKS". A structural model having dimensions of 100 x 100 x 400 mm was used for the study. Materials of concrete grades C12/15 through C25/30 with corresponding properties have been used. Load parameters for modeling of the deformation process varied from 0.1 to 0.5 of the ultimate loads. Performed calculations made it possible to obtain fields of stress, deformation and displacement under different model parameters and stress levels.
- 1 April 2021
- Published by Technical University of Moldova in Journal of Engineering Science
- Vol. 28 (1)
STRESS - STRAIN STATE OF THE LOCAL AREA IN THE BUILDING ELEMENT WITH STRUCTURAL DEFECT
Evaluation of the building element technical state relies on verification calculations using estimated construction material properties. Physical and mechanical properties are estimated predominately by using non-destructive test methods. The accuracy of these methods is affected by the level of stress-strain state of the structural element and present structural defects. The variability of the concrete properties over time under constant loads is a determining factor for the durability and reliability of the structural element. The influence of the physical and mechanical characteristics of a construction material on the deformation process of the local area of the structural element adjacent to the structural defect has been investigated. The research has been performed on structural models using software systems "LIRA SAPR" and "SOLIDWORKS". A structural model having dimensions of 100 x 100 x 400 mm was used for the study. Materials of concrete grades C12/15 through C25/30 with corresponding properties have been used. Load parameters for modeling of the deformation process varied from 0.1 to 0.5 of the ultimate loads. Performed calculations made it possible to obtain fields of stress, deformation and displacement under different model parameters and stress levels.
- 14 June 2020
- Published by Springer Nature
- p. 95-102
Time Measurement of Ultrasonic Vibrations Extension in Concrete of Different Compositions
- 14 June 2020
- Published by Springer Nature
- p. 95-102
Time Measurement of Ultrasonic Vibrations Extension in Concrete of Different Compositions