Emanuel Rodrigo de Oliveira Rossetto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emanuel Rodrigo de Oliveira Rossetto has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Leandro Galon
Laboratory of Sustainable Management of Agricultural Systems, Federal University of Fronteira Sul (UFFS), Erechim, RS, Brazil
10 shared publications - César Tiago Forte
Universidade Federal de Santa Maria
5 shared publications - Gismael Francisco Perin
Universidade Federal da Fronteira Sul (UFFS), Campus Erechim, Erechim, RS, Brazil
5 shared publications - Daiani Brandler
Universidade Federal da Fronteira Sul, Erechim, RS, Brasil
4 shared publications - Milena Barretta Franceschetti
Universidade Federal da Fronteira Sul, Brazil
4 shared publications - Caroline Müller
Universidade Federal da Fronteira Sul, Brazil
3 shared publications
Latest Publications
- Open Access
- 2 August 2024
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 19 (3) , 1-11
Selectivity of 2,4-D salts applied at different phenological stages of wheat cultivars
The selectivity of the herbicide 2,4-D depends on the plant species, the formulations produced and/or the developmental stages of the plants to which it is applied. The objective of this study was to assess the best stage of development of wheat cultivars for the application of 2,4-D salt formulations. The experimental design consisted of randomized blocks arranged in a factorial scheme (2 × 2 × 4 + 1) with four replicates. The treatments evaluated were wheat cultivars (OR 1403 and TBio Toruk), 2,4-D formulations (amine and choline salts) and crop development stages (before tillering start, at full tillering, first node and booting), another control without herbicides. 2,4-D choline and amine cause greater phytotoxicity when applied at the phenological stage of the first node of the cultivar OR 1403 and less at TBio Toruk. The highest number and length of ears, number of full grains, thousand grain weight, hectoliter weight, grain productivity and lowest number of sterile grains generally occurred when 2,4-D-choline was applied at the first node of the cultivar OR 1403 and when 2,4-D-amine was applied at the rubberization of TBio Toruk. The highest grain yields occurred when 2,4-D-choline and amine were applied to varieties in wheat booting. A seletividade do herbicida 2,4-D depende das espécies de plantas, das formulações que é produzido e/ou dos estádios de desenvolvimento das culturas em que é aplicado. O objetivo deste estudo foi avaliar o melhor estádio de desenvolvimento de cultivares de trigo para aplicação de formulações de sais de 2,4-D. O delineamento utilizado foi de blocos casualizados, arranjado em esquema fatorial (2 × 2 × 4 + 1), com quatro repetições. Os tratamentos avaliados foram, cultivares de trigo (OR 1403 e TBIO Toruk), formulações de 2,4-D (sal amina e colina) e estádios de desenvolvimento da cultura (antes do perfilhamento, no perfilhamento, no primeiro nó e emborrachamento), mais uma testemunha sem herbicidas. O 2,4-D colina e amina ocasionam maior fitotoxicidade ao serem aplicados no estádio fenológico de primeiro nó da cultivar OR 1403 e menor na TBIO Toruk. O maior número e comprimento de espigas, número de grãos cheios, peso de mil grãos, peso hectolitro, produtividade de grãos e menor número de grãos estéreis, em geral, ocorreu ao se aplicar o 2,4-D colina no primeiro nó da cultivar OR 1403 e no emborrachamento da TBIO Toruk ao se usar o 2,4-D amina. As maiores produtividades de grãos do trigo ocorreram ao se usar o 2,4-D colina e amina, nas cultivares OR 1403 e TBIO Toruk, no emborrachamento.
- 2 August 2024
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 19 (3) , 1-11
Open AccessSelectivity of 2,4-D salts applied at different phenological stages of wheat cultivars
The selectivity of the herbicide 2,4-D depends on the plant species, the formulations produced and/or the developmental stages of the plants to which it is applied. The objective of this study was to assess the best stage of development of wheat cultivars for the application of 2,4-D salt formulations. The experimental design consisted of randomized blocks arranged in a factorial scheme (2 × 2 × 4 + 1) with four replicates. The treatments evaluated were wheat cultivars (OR 1403 and TBio Toruk), 2,4-D formulations (amine and choline salts) and crop development stages (before tillering start, at full tillering, first node and booting), another control without herbicides. 2,4-D choline and amine cause greater phytotoxicity when applied at the phenological stage of the first node of the cultivar OR 1403 and less at TBio Toruk. The highest number and length of ears, number of full grains, thousand grain weight, hectoliter weight, grain productivity and lowest number of sterile grains generally occurred when 2,4-D-choline was applied at the first node of the cultivar OR 1403 and when 2,4-D-amine was applied at the rubberization of TBio Toruk. The highest grain yields occurred when 2,4-D-choline and amine were applied to varieties in wheat booting. A seletividade do herbicida 2,4-D depende das espécies de plantas, das formulações que é produzido e/ou dos estádios de desenvolvimento das culturas em que é aplicado. O objetivo deste estudo foi avaliar o melhor estádio de desenvolvimento de cultivares de trigo para aplicação de formulações de sais de 2,4-D. O delineamento utilizado foi de blocos casualizados, arranjado em esquema fatorial (2 × 2 × 4 + 1), com quatro repetições. Os tratamentos avaliados foram, cultivares de trigo (OR 1403 e TBIO Toruk), formulações de 2,4-D (sal amina e colina) e estádios de desenvolvimento da cultura (antes do perfilhamento, no perfilhamento, no primeiro nó e emborrachamento), mais uma testemunha sem herbicidas. O 2,4-D colina e amina ocasionam maior fitotoxicidade ao serem aplicados no estádio fenológico de primeiro nó da cultivar OR 1403 e menor na TBIO Toruk. O maior número e comprimento de espigas, número de grãos cheios, peso de mil grãos, peso hectolitro, produtividade de grãos e menor número de grãos estéreis, em geral, ocorreu ao se aplicar o 2,4-D colina no primeiro nó da cultivar OR 1403 e no emborrachamento da TBIO Toruk ao se usar o 2,4-D amina. As maiores produtividades de grãos do trigo ocorreram ao se usar o 2,4-D colina e amina, nas cultivares OR 1403 e TBIO Toruk, no emborrachamento.
- 30 April 2022
- Published by Springer Nature in Journal of Plant Diseases and Protection
- Vol. 129 (4) , 993-1003
Morphophysiological changes in clearfield oilseed rape as a result of the application of ALS-herbicides and weed competition
- 30 April 2022
- Published by Springer Nature in Journal of Plant Diseases and Protection
- Vol. 129 (4) , 993-1003
Morphophysiological changes in clearfield oilseed rape as a result of the application of ALS-herbicides and weed competition
- Open Access
- 8 December 2021
- Published by Universidade do Estado de Santa Catarina in Revista de Ciências Agroveterinárias
- Vol. 20 (3) , 199-212
Seletividade e eficácia de herbicidas aplicados à cultura do trigo
As plantas daninhas ocasionam efeitos negativos na produtividade e na qualidade dos grãos da cultura do trigo quando não controladas de modo eficiente. Assim sendo, objetivou-se com os trabalhos avaliar a seletividade e a eficácia de herbicidas aplicados para o manejo de plantas daninhas infestante da cultivar de trigo TBIO Sinuelo. Foram instalados dois experimentos, um para avaliar a seletividade e outro a eficácia de herbicidas aplicados em trigo, em blocos casualizados, com quatro repetições. Os tratamentos testados foram: iodosulfuron, pyroxsulam, metsulfuron-methyl, 2,4-D, clodinafope-propargil, [bentazon + imazamox], saflufenacil, bentazon, carfentrazone-ethyl, imazamox, pendimethalin, [sulfentrazone + diuron], mais duas testemunhas uma capinada e outra infestada. Os herbicidas que ocasionaram as maiores injúrias ao trigo foram o imazamox e a mistura comercial de [bentazon + imazamox] com fitotoxicidade próxima a 50%. A aplicação da mistura comercial de [sulfentrazone + diuron] demonstrou a maior produtividade de grãos do trigo. O uso de clodinafope-propargil e pyroxsulam apresentaram os melhores controles de Lolium multiflorum, com 100 e 98,25%, aos 21 dias após a aplicação dos tratamentos, respectivamente. Ocorreu controle acima de 90% de Raphanus raphanistrum com uso de iodosulfuron, pyroxsulam, metsulfuron-methyl, 2,4-D, [bentazon + imazamox], saflufenacil, bentazon e carfentrazone. O clodinafope-propargil demonstra o maior controle para o azevém e o iodosulfuron-ethyl, pyroxsulam, metsulfurom-metílico, 2,4-D, saflufenacil e carfentrazone para o nabo. O pyroxsulam foi o tratamento que demonstrou, nos dois experimentos, os melhores resultados para os componentes da produção, especialmente para a produtividade da cultura.
- 8 December 2021
- Published by Universidade do Estado de Santa Catarina in Revista de Ciências Agroveterinárias
- Vol. 20 (3) , 199-212
Open AccessSeletividade e eficácia de herbicidas aplicados à cultura do trigo
As plantas daninhas ocasionam efeitos negativos na produtividade e na qualidade dos grãos da cultura do trigo quando não controladas de modo eficiente. Assim sendo, objetivou-se com os trabalhos avaliar a seletividade e a eficácia de herbicidas aplicados para o manejo de plantas daninhas infestante da cultivar de trigo TBIO Sinuelo. Foram instalados dois experimentos, um para avaliar a seletividade e outro a eficácia de herbicidas aplicados em trigo, em blocos casualizados, com quatro repetições. Os tratamentos testados foram: iodosulfuron, pyroxsulam, metsulfuron-methyl, 2,4-D, clodinafope-propargil, [bentazon + imazamox], saflufenacil, bentazon, carfentrazone-ethyl, imazamox, pendimethalin, [sulfentrazone + diuron], mais duas testemunhas uma capinada e outra infestada. Os herbicidas que ocasionaram as maiores injúrias ao trigo foram o imazamox e a mistura comercial de [bentazon + imazamox] com fitotoxicidade próxima a 50%. A aplicação da mistura comercial de [sulfentrazone + diuron] demonstrou a maior produtividade de grãos do trigo. O uso de clodinafope-propargil e pyroxsulam apresentaram os melhores controles de Lolium multiflorum, com 100 e 98,25%, aos 21 dias após a aplicação dos tratamentos, respectivamente. Ocorreu controle acima de 90% de Raphanus raphanistrum com uso de iodosulfuron, pyroxsulam, metsulfuron-methyl, 2,4-D, [bentazon + imazamox], saflufenacil, bentazon e carfentrazone. O clodinafope-propargil demonstra o maior controle para o azevém e o iodosulfuron-ethyl, pyroxsulam, metsulfurom-metílico, 2,4-D, saflufenacil e carfentrazone para o nabo. O pyroxsulam foi o tratamento que demonstrou, nos dois experimentos, os melhores resultados para os componentes da produção, especialmente para a produtividade da cultura.
- 2 November 2021
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part B
- Vol. 56 (11) , 986-993
Interaction between pesticides applied alone or in mixtures in corn
The objective of this work was to evaluate the selectivity of herbicides applied alone or in tank mix, and also of combinations of different classes of pesticides (fungicides, herbicides and insecticides) on corn. An experiment was installed in the 2017/18 crop to assess herbicide selectivity, and repeated in 2018/19. The second experiment aimed to assess the selectivity of mixtures of different classes of pesticides, and was installed only in 2017/18. The experimental design adopted in the tests was randomized blocks, with four replicates. In each trial, a total of 16 treatments were evaluated, plus a control. At 7, 14 and 21 days after the application of treatments the phytotoxicity to corn was evaluated and the yield components and grain yield were determined. Herbicides caused low levels of injury to the corn plants, with small variations in yield components, and affected crop yield differently. The mixtures of pesticides promoted low phytotoxicity, affected yield components inconsistently and caused changes in corn yield. Although these herbicides and other pesticides are registered for use in corn crops, application alone or in tank mix of certain molecules can cause losses in grain yield.
- 2 November 2021
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part B
- Vol. 56 (11) , 986-993
Interaction between pesticides applied alone or in mixtures in corn
The objective of this work was to evaluate the selectivity of herbicides applied alone or in tank mix, and also of combinations of different classes of pesticides (fungicides, herbicides and insecticides) on corn. An experiment was installed in the 2017/18 crop to assess herbicide selectivity, and repeated in 2018/19. The second experiment aimed to assess the selectivity of mixtures of different classes of pesticides, and was installed only in 2017/18. The experimental design adopted in the tests was randomized blocks, with four replicates. In each trial, a total of 16 treatments were evaluated, plus a control. At 7, 14 and 21 days after the application of treatments the phytotoxicity to corn was evaluated and the yield components and grain yield were determined. Herbicides caused low levels of injury to the corn plants, with small variations in yield components, and affected crop yield differently. The mixtures of pesticides promoted low phytotoxicity, affected yield components inconsistently and caused changes in corn yield. Although these herbicides and other pesticides are registered for use in corn crops, application alone or in tank mix of certain molecules can cause losses in grain yield.
- 1 September 2021
- Published by Revista Agraria Academica in Revista Agraria Academica
- Vol. 4 (5)
Interference and level of economic damage of turnip in canola
The weeds if not properly controlled have great ability to settle in agricultural systems, affecting crop production. The objective of this work was to determine the interference and level of economic damage in different density of crop. The treatments were composed of canola hybrids (Hyola 50, Hyola 76, Hyola 433, Hyola 571 CL, Hyola 575 CL and Diamond) and twelve infestation turnip density in crop. The variables evaluated to estimate the competitiveness of the hybrids were plant density, leaf area, soil cover and dry mass of the turnip. Grain yield, canola price, herbicide efficiency, and control cost were used to determine the weed's level of economic damage on the crop. The canola hybrids Hyola 575 CL, Hyola 50, Hyola 76 and Hyola 571 CL are more competitive with turnip. The values of economic damage levels range from 2.86 to 5.95, 2.43 to 5.05, 2.22 to 5.43 and 2.99 to 6.22 turnip plants m-2 for hybrids Hyola 50, Hyola 76, Hyola 571 CL and Hyola 575 CL, respectively, as a function of simulated variables. The increased grain yield, canola price, herbicide efficiency and lower control costs reduce the level of economic damage, justifying the adoption of control.
- 1 September 2021
- Published by Revista Agraria Academica in Revista Agraria Academica
- Vol. 4 (5)
Interference and level of economic damage of turnip in canola
The weeds if not properly controlled have great ability to settle in agricultural systems, affecting crop production. The objective of this work was to determine the interference and level of economic damage in different density of crop. The treatments were composed of canola hybrids (Hyola 50, Hyola 76, Hyola 433, Hyola 571 CL, Hyola 575 CL and Diamond) and twelve infestation turnip density in crop. The variables evaluated to estimate the competitiveness of the hybrids were plant density, leaf area, soil cover and dry mass of the turnip. Grain yield, canola price, herbicide efficiency, and control cost were used to determine the weed's level of economic damage on the crop. The canola hybrids Hyola 575 CL, Hyola 50, Hyola 76 and Hyola 571 CL are more competitive with turnip. The values of economic damage levels range from 2.86 to 5.95, 2.43 to 5.05, 2.22 to 5.43 and 2.99 to 6.22 turnip plants m-2 for hybrids Hyola 50, Hyola 76, Hyola 571 CL and Hyola 575 CL, respectively, as a function of simulated variables. The increased grain yield, canola price, herbicide efficiency and lower control costs reduce the level of economic damage, justifying the adoption of control.
- 19 January 2021
- Published by Taylor & Francis in International Journal of Pest Management
- Vol. 69 (3) , 232-240
Allelopathic potential of winter and summer cover crops on the germination and seedling growth of Solanum americanum
Sustainable weed management strategies are important for reducing chemical inputs and development of weed resistance. This study aimed to evaluate the effect of extracts from winter cover crops (cereal rye, black oat, forage turnip, and common vetch) and summer cover crops (jack bean, velvet bean, and brown hemp) on seed germination and seedling growth of glossy nightshade (Solanum americanum Mill), under controlled conditions. The aqueous extracts were produced from the shoot biomass of cover crops at concentrations of 0%, 25%, 50%, 75%, and 100%. Fifty S. americanum seeds were placed on Germitest paper moistened with 15 mL of each extract concentration. Cereal rye extract at the highest concentration reduced total germination to 43% and caused a 62% reduction in the germination rate index (GRI) of S. americanum. Velvet bean extract reduced germination, GRI, and seedling growth of S. americanum from the lowest concentration applied, while concentrations of 75% and 100% completely suppressed seedling development. Decomposing cereal rye and velvet bean cover crops have potential to suppress germination and growth of S. americanum. Efficient cover crops could reduce herbicide applications, and thus improve herbicide resistance management.
- 19 January 2021
- Published by Taylor & Francis in International Journal of Pest Management
- Vol. 69 (3) , 232-240
Allelopathic potential of winter and summer cover crops on the germination and seedling growth of Solanum americanum
Sustainable weed management strategies are important for reducing chemical inputs and development of weed resistance. This study aimed to evaluate the effect of extracts from winter cover crops (cereal rye, black oat, forage turnip, and common vetch) and summer cover crops (jack bean, velvet bean, and brown hemp) on seed germination and seedling growth of glossy nightshade (Solanum americanum Mill), under controlled conditions. The aqueous extracts were produced from the shoot biomass of cover crops at concentrations of 0%, 25%, 50%, 75%, and 100%. Fifty S. americanum seeds were placed on Germitest paper moistened with 15 mL of each extract concentration. Cereal rye extract at the highest concentration reduced total germination to 43% and caused a 62% reduction in the germination rate index (GRI) of S. americanum. Velvet bean extract reduced germination, GRI, and seedling growth of S. americanum from the lowest concentration applied, while concentrations of 75% and 100% completely suppressed seedling development. Decomposing cereal rye and velvet bean cover crops have potential to suppress germination and growth of S. americanum. Efficient cover crops could reduce herbicide applications, and thus improve herbicide resistance management.
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 56
Physiological and productive traits of soybean with metsulfuron-methyl application at early desiccation
The objective of this work was to evaluate the effects of metsulfuron-methyl rates, applied at different times, on the physiological and productive traits of soybean (Glycine max) in two crop years, in field conditions, using cucumber (Cucumis sativus) as a bioindicator plant, in greenhouse conditions. The experiments were conducted in a randomized complete block, in a 4x5 factorial arrangement, with four replicates. Factor A was the herbicide application time (45, 30, 15, and 0 days before soybean sowing, DBS), and factor B was the metsulfuron-methyl rate (0, 3.6, 5.4, 7.2, and 9.0 g ha-1 a.i.). The following variables were evaluated: phytotoxicity, gas exchange, chlorophyll a fluorescence, and yield components. The highest phytotoxicity in soybean plants is observed after the use of the highest rate of metsulfuron-methyl and with sowing at 0 DBS. The electron transport rate drastically reduces with an increasing metsulfuron-methyl rate and sowing proximity, whereas non-photochemical quenching, acting as a defense mechanism, increases in soybean plants exposed to a herbicide carryover of up to 5.4 g ha-1. Metsulfuron-methyl carryover reduces soybean 1,000-grain weight and productivity as a function of application rate and sowing period. For the cucumber plants, negative effects on physiological traits were also verified. An interval of more than 45 days is recommended for sowing soybean after metsulfuron-methyl application for desiccation.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 56
Open AccessPhysiological and productive traits of soybean with metsulfuron-methyl application at early desiccation
The objective of this work was to evaluate the effects of metsulfuron-methyl rates, applied at different times, on the physiological and productive traits of soybean (Glycine max) in two crop years, in field conditions, using cucumber (Cucumis sativus) as a bioindicator plant, in greenhouse conditions. The experiments were conducted in a randomized complete block, in a 4x5 factorial arrangement, with four replicates. Factor A was the herbicide application time (45, 30, 15, and 0 days before soybean sowing, DBS), and factor B was the metsulfuron-methyl rate (0, 3.6, 5.4, 7.2, and 9.0 g ha-1 a.i.). The following variables were evaluated: phytotoxicity, gas exchange, chlorophyll a fluorescence, and yield components. The highest phytotoxicity in soybean plants is observed after the use of the highest rate of metsulfuron-methyl and with sowing at 0 DBS. The electron transport rate drastically reduces with an increasing metsulfuron-methyl rate and sowing proximity, whereas non-photochemical quenching, acting as a defense mechanism, increases in soybean plants exposed to a herbicide carryover of up to 5.4 g ha-1. Metsulfuron-methyl carryover reduces soybean 1,000-grain weight and productivity as a function of application rate and sowing period. For the cucumber plants, negative effects on physiological traits were also verified. An interval of more than 45 days is recommended for sowing soybean after metsulfuron-methyl application for desiccation.
- Open Access
- 2 March 2020
- Published by Macrothink Institute, Inc. in Journal of Agricultural Studies
- Vol. 8 (3) , 775-787
Selectivity of Saflufenacil Applied Alone or Mixed to Glyphosate in Maize
The use of selective herbicides is important for weed management in agricultural crops. Selectivity studies of new molecules are really important to expand the control options of glyphosate-resistant and -tolerant eudicotyledons in corn. The objective of this work was to evaluate the selectivity of the herbicide saflufenacil applied alone in different doses in post-emergence of corn and in a mixture with glyphosate. The design used was randomized blocks, with four replications, with treatments consisting of five doses of saflufenacil, applied alone and in a mixture with a fixed dose of glyphosate, in addition to the weeded control and only glyphosate. At 7, 14, 21 and 28 days after application (DAT), the phytotoxicity of the herbicides to the crop was evaluated. The physiological variables were measured at 35 DAT. At harvest, yield components were determined, in addition to the mass of 1,000 grains and grain yield. The application of the mixture of glyphosate with saflufenacil increases phytotoxicity symptoms and yield losses. Doses of up to 70 g ha-1, applied alone, caused low phytotoxicity to corn and did not interfere in yield. The use of glyphosate + saflufenacil tank mixtures caused decreases in yield of 43.96 and 40.81% when compared, respectively, with the weeded control and the averages of the applications of the herbicides alone. Saflufenacil has the potential to be used in the management of eudicotyledonous weeds, as long as it is not mixed with glyphosate and the dose limit is respected.
- 2 March 2020
- Published by Macrothink Institute, Inc. in Journal of Agricultural Studies
- Vol. 8 (3) , 775-787
Open AccessSelectivity of Saflufenacil Applied Alone or Mixed to Glyphosate in Maize
The use of selective herbicides is important for weed management in agricultural crops. Selectivity studies of new molecules are really important to expand the control options of glyphosate-resistant and -tolerant eudicotyledons in corn. The objective of this work was to evaluate the selectivity of the herbicide saflufenacil applied alone in different doses in post-emergence of corn and in a mixture with glyphosate. The design used was randomized blocks, with four replications, with treatments consisting of five doses of saflufenacil, applied alone and in a mixture with a fixed dose of glyphosate, in addition to the weeded control and only glyphosate. At 7, 14, 21 and 28 days after application (DAT), the phytotoxicity of the herbicides to the crop was evaluated. The physiological variables were measured at 35 DAT. At harvest, yield components were determined, in addition to the mass of 1,000 grains and grain yield. The application of the mixture of glyphosate with saflufenacil increases phytotoxicity symptoms and yield losses. Doses of up to 70 g ha-1, applied alone, caused low phytotoxicity to corn and did not interfere in yield. The use of glyphosate + saflufenacil tank mixtures caused decreases in yield of 43.96 and 40.81% when compared, respectively, with the weeded control and the averages of the applications of the herbicides alone. Saflufenacil has the potential to be used in the management of eudicotyledonous weeds, as long as it is not mixed with glyphosate and the dose limit is respected.
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Arquivos do Instituto Biológico
- Vol. 87
Weed management in glyphosate-resistant maize
The application of glyphosate associated with other herbicides is an important alternative for weed control in maize, to increase control spectrum and to minimize problems with resistance and tolerance from some species to the product. The objective of this work was to evaluate the efficacy, selectivity and effects on the grain yield components of glyphosate-resistant maize as a function of its application, associated or not with other pre- and postemergence herbicides. The design used was randomized blocks with four replications. Treatments consisted in the use of glyphosate combined with the herbicides: atrazine, [atrazine + simazine], [atrazine + oil], [atrazine + S-metolachlor], applied pre- and/or postemergence and [nicosulfuron + mesotrione] only postemergence, plus two controls, one weeded and one infested. The evaluated variables were maize phytotoxicity, weed control, ear insertion height, number of rows per ear, number of grains per row, one thousand grain mass and grain yield. Herbicide treatments caused low phytotoxicity to maize, less than 6%; control greater than 88, 95 and 95% for alexandergrass, turnip and sunflower, respectively, and did not affect grain yield components. The tested herbicides are selective to the hybrid Forseed 2A521 PW and effective in weed control. Weed control with weeding or herbicide increased maize Forseed 2A521 PW yield by 43%. The association of glyphosate with pre- or postemergence herbicides increased maize grain yield by approximately 14%.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Arquivos do Instituto Biológico
- Vol. 87
Open AccessWeed management in glyphosate-resistant maize
The application of glyphosate associated with other herbicides is an important alternative for weed control in maize, to increase control spectrum and to minimize problems with resistance and tolerance from some species to the product. The objective of this work was to evaluate the efficacy, selectivity and effects on the grain yield components of glyphosate-resistant maize as a function of its application, associated or not with other pre- and postemergence herbicides. The design used was randomized blocks with four replications. Treatments consisted in the use of glyphosate combined with the herbicides: atrazine, [atrazine + simazine], [atrazine + oil], [atrazine + S-metolachlor], applied pre- and/or postemergence and [nicosulfuron + mesotrione] only postemergence, plus two controls, one weeded and one infested. The evaluated variables were maize phytotoxicity, weed control, ear insertion height, number of rows per ear, number of grains per row, one thousand grain mass and grain yield. Herbicide treatments caused low phytotoxicity to maize, less than 6%; control greater than 88, 95 and 95% for alexandergrass, turnip and sunflower, respectively, and did not affect grain yield components. The tested herbicides are selective to the hybrid Forseed 2A521 PW and effective in weed control. Weed control with weeding or herbicide increased maize Forseed 2A521 PW yield by 43%. The association of glyphosate with pre- or postemergence herbicides increased maize grain yield by approximately 14%.
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Advances in Weed Science
- Vol. 38
Interference and Level of Economic Damage of Alexandergrass on Corn
The objective of this work was to evaluate the interference and to determine the level of economic damage (NDE) of the weed when infesting the corn crop. Treatments were composed by corn densities (2.60, 3.10, 3.65, 4.00 and 4.80 plants m-1) and 10 Alexandergrass populations for each crop seeding density. The population of plants, leaf area, soil cover and shoot dry mass of Alexandergrass were evaluated as indicator of infestation. Shoot dry mass of Alexandergrass presents better adjustment to the model of rectangular hyperbole, and losses of grain yield due to interference of the weed were satisfactorily estimated by this model. Corn sowing densities of 2.60; 3.10 and 3.65 plants m-1 in average, were more competitive of all evaluated variables in the presence of Alexandergrass. Corn densities of 2.60; 3.10 and 3.65 plants m-1 increase the level of economic damage, justifying the adoption of control measures of Alexandergrass when in higher populations. NDE values ranged from 1.58 to 9.37 plants m-2 at the densities of 4.00 and 4.80 maize plants m-1, which were less competitive with Alexandergrass.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Advances in Weed Science
- Vol. 38
Open AccessInterference and Level of Economic Damage of Alexandergrass on Corn
The objective of this work was to evaluate the interference and to determine the level of economic damage (NDE) of the weed when infesting the corn crop. Treatments were composed by corn densities (2.60, 3.10, 3.65, 4.00 and 4.80 plants m-1) and 10 Alexandergrass populations for each crop seeding density. The population of plants, leaf area, soil cover and shoot dry mass of Alexandergrass were evaluated as indicator of infestation. Shoot dry mass of Alexandergrass presents better adjustment to the model of rectangular hyperbole, and losses of grain yield due to interference of the weed were satisfactorily estimated by this model. Corn sowing densities of 2.60; 3.10 and 3.65 plants m-1 in average, were more competitive of all evaluated variables in the presence of Alexandergrass. Corn densities of 2.60; 3.10 and 3.65 plants m-1 increase the level of economic damage, justifying the adoption of control measures of Alexandergrass when in higher populations. NDE values ranged from 1.58 to 9.37 plants m-2 at the densities of 4.00 and 4.80 maize plants m-1, which were less competitive with Alexandergrass.