Ashish Kaushal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ashish Kaushal has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
Vishal Singh
Department of Materials Science and Engineering National Institute of Technology Hamirpur India
3 shared publications- Vishal Singh
Department of Materials Science and Engineering, National Institute of Technology, Hamirpur, India
3 shared publications
Latest Publications
- 16 April 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (6) , 3708-3715
Excellent electromagnetic interference shielding performance of polypropylene/carbon fiber/multiwalled carbon nanotube nanocomposites
In this study, we investigated the mechanical, DC conductivity, and electromagnetic interference (EMI) shielding properties of multiwalled carbon nanotubes (MWCNTs) and carbon fiber reinforced polypropylene (CNC) nanocomposites. The nanocomposites were prepared by melt processing technique using a twin‐screw extruder followed by injection molding. This combination of CF and MWCNT improved the tensile strength and modulus of the nanocomposites by up to 31.14% and 60.14%. The percolation behavior helped to improve the DC electrical conductivity from 2.07 × 10−10 to 9.58 × 10−2 s/cm. The CNC nanocomposites exhibited shielding effectiveness of 51.9 dB at maximum filler loading in the X‐band (8.2–12.4 GHz) for a 2 mm thick sample. In addition, efforts have been made to develop a compatible EMI shielding material using multiple fillers.
- 16 April 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (6) , 3708-3715
Excellent electromagnetic interference shielding performance of polypropylene/carbon fiber/multiwalled carbon nanotube nanocomposites
In this study, we investigated the mechanical, DC conductivity, and electromagnetic interference (EMI) shielding properties of multiwalled carbon nanotubes (MWCNTs) and carbon fiber reinforced polypropylene (CNC) nanocomposites. The nanocomposites were prepared by melt processing technique using a twin‐screw extruder followed by injection molding. This combination of CF and MWCNT improved the tensile strength and modulus of the nanocomposites by up to 31.14% and 60.14%. The percolation behavior helped to improve the DC electrical conductivity from 2.07 × 10−10 to 9.58 × 10−2 s/cm. The CNC nanocomposites exhibited shielding effectiveness of 51.9 dB at maximum filler loading in the X‐band (8.2–12.4 GHz) for a 2 mm thick sample. In addition, efforts have been made to develop a compatible EMI shielding material using multiple fillers.
- 27 July 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (1) , 51444
Analysis of mechanical, thermal, electrical andEMIshielding properties of graphite/carbon fiber reinforced polypropylene composites prepared via a twin screw extruder
The present research focuses on the preparation of an efficient material that acts as a deterrent to electromagnetic pollution. In this study, graphite and carbon fiber (CF) reinforced polypropylene (PP) composites (GCF) are prepared using a melt processing technique via a twin‐screw extruder. The prepared composites were evaluated for mechanical, thermal, DC conductivity, and EMI shielding properties. There is a rise in the tensile strength (4.32%) and thermal stability (6.57%) of composites were recorded as compared to pure PP. The fractured morphology of the composites showed the breakdown of CF, leading to the improvement in the tensile strength of the composites. An increase in electrical conductivity was seen at maximum (GCF4) filler loading indicating 2.31 × 10−4 S/cm which is much better than the pure PP value (2.07 × 10−10 S/cm). The maximum value of shielding effectiveness is achieved at the maximum weight percentage of filler loading which is −44.43 dB with a thickness of 2 mm covering the X‐band (8.2–12.4 GHz).
- 27 July 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (1) , 51444
Analysis of mechanical, thermal, electrical andEMIshielding properties of graphite/carbon fiber reinforced polypropylene composites prepared via a twin screw extruder
The present research focuses on the preparation of an efficient material that acts as a deterrent to electromagnetic pollution. In this study, graphite and carbon fiber (CF) reinforced polypropylene (PP) composites (GCF) are prepared using a melt processing technique via a twin‐screw extruder. The prepared composites were evaluated for mechanical, thermal, DC conductivity, and EMI shielding properties. There is a rise in the tensile strength (4.32%) and thermal stability (6.57%) of composites were recorded as compared to pure PP. The fractured morphology of the composites showed the breakdown of CF, leading to the improvement in the tensile strength of the composites. An increase in electrical conductivity was seen at maximum (GCF4) filler loading indicating 2.31 × 10−4 S/cm which is much better than the pure PP value (2.07 × 10−10 S/cm). The maximum value of shielding effectiveness is achieved at the maximum weight percentage of filler loading which is −44.43 dB with a thickness of 2 mm covering the X‐band (8.2–12.4 GHz).
- 26 November 2020
- Published by Wiley in Polymer Composites
- Vol. 42 (3) , 1148-1154
Electromagnetic interference shielding response of multiwall carbon nanotube/polypropylene nanocomposites prepared via melt processing technique
The present study tells about dc conductivity, mechanical, and electromagnetic interference (EMI) shielding response of multiwall carbon nanotubes (MWCNT) reinforced polypropylene nanocomposites prepared via melt processing technique using a twin‐screw extruder. The tensile strength of the nanocomposites shows improvement by 27% compared to the sample with no filler added (PCN0). The incorporation of MWCNT leads to a boost in electrical conductivity from 2.07 × 10−10 to 4.21 × 10−6 S/cm. The maximum EMI shielding effectiveness obtained at 5 wt% of MWCNT load valued −21.07 in the X‐band (8.2‐12.4 GHz) frequency range, measured using the vector network analyzer. The results concluded that the prepared nanocomposite is suitable to be used as a mechanically durable shielding material to fulfill the industrial needs of shielding.
- 26 November 2020
- Published by Wiley in Polymer Composites
- Vol. 42 (3) , 1148-1154
Electromagnetic interference shielding response of multiwall carbon nanotube/polypropylene nanocomposites prepared via melt processing technique
The present study tells about dc conductivity, mechanical, and electromagnetic interference (EMI) shielding response of multiwall carbon nanotubes (MWCNT) reinforced polypropylene nanocomposites prepared via melt processing technique using a twin‐screw extruder. The tensile strength of the nanocomposites shows improvement by 27% compared to the sample with no filler added (PCN0). The incorporation of MWCNT leads to a boost in electrical conductivity from 2.07 × 10−10 to 4.21 × 10−6 S/cm. The maximum EMI shielding effectiveness obtained at 5 wt% of MWCNT load valued −21.07 in the X‐band (8.2‐12.4 GHz) frequency range, measured using the vector network analyzer. The results concluded that the prepared nanocomposite is suitable to be used as a mechanically durable shielding material to fulfill the industrial needs of shielding.
- 31 October 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (24) , 22162-22170
Effect of filler loading on the shielding of electromagnetic interference of reduced graphene oxide reinforced polypropylene nanocomposites prepared via a twin-screw extruder
- 31 October 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (24) , 22162-22170
Effect of filler loading on the shielding of electromagnetic interference of reduced graphene oxide reinforced polypropylene nanocomposites prepared via a twin-screw extruder
- 24 July 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (17) , 14088-14100
Development of lightweight polypropylene/carbon fiber composites for its application in shielding of electromagnetic interference in X-band
- 24 July 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (17) , 14088-14100
Development of lightweight polypropylene/carbon fiber composites for its application in shielding of electromagnetic interference in X-band
- 15 June 2020
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 49 (9) , 5293-5301
Melt-Processed Graphite-Polypropylene Composites for EMI Shielding Applications
- 15 June 2020
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 49 (9) , 5293-5301
Melt-Processed Graphite-Polypropylene Composites for EMI Shielding Applications