Mei Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mei Lin has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Hao Ying
School of Civil Engineering, Northwest Minzu University, Lanzhou 730124, China
1 shared publication - Jing Wang
School of Civil Engineering, Northwest Minzu University, Lanzhou 730124, China
1 shared publication - Leilei Li
School of Civil Engineering, Northwest Minzu University, Lanzhou 730030, China
1 shared publication - Liang Hua
School of Civil Engineering, Northwest Minzu University, Lanzhou 730124, China
1 shared publication Ping Li
1 shared publicationPing Wen Yang
1 shared publication
Latest Publications
- Open Access
Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics
ZrB2-SiC-Zr2Al4C5 multi-phase ceramics with uniform structure and high density were successfully prepared through the introduction of in situ synthesized Zr2Al4C5 into ZrB2-SiC ceramic via SPS at 1800 °C. A systematic analysis and discussion of the experimental results and proposed mechanisms were carried out to demonstrate the composition-dependent sintering properties, mechanical properties and oxidation behavior. The results showed that the in situ synthesized Zr2Al4C5 could be evenly distributed in the ZrB2-SiC ceramic matrix and inhibited the growth of ZrB2 grains, which played a positive role in the sintering densification of the composite ceramics. With increasing Zr2Al4C5 content, the Vickers hardness and Young’s modulus of composite ceramics gradually decreased. The fracture toughness showed a trend that first increased and then decreased, and was increased by about 30% compared with ZrB2-SiC ceramics. The major phases resulting from the oxidation of samples were ZrO2, ZrSiO4, aluminosilicate and SiO2 glass. With increasing Zr2Al4C5 content, the oxidative weight showed a trend that first increased then decreased; the composite ceramic with 30 vol.% Zr2Al4C5 showed the smallest oxidative weight gain. We believe that the presence of Zr2Al4C5 results in the formation of Al2O3 during the oxidation process, subsequently resulting in a lowering of the viscosity of the glassy silica scale, which in turn intensifies the oxidation of the composite ceramics. This would also increase oxygen permeation through the scale, adversely affecting the oxidation resistance of the composites with high Zr2Al4C5 content.
Open AccessEffect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics
ZrB2-SiC-Zr2Al4C5 multi-phase ceramics with uniform structure and high density were successfully prepared through the introduction of in situ synthesized Zr2Al4C5 into ZrB2-SiC ceramic via SPS at 1800 °C. A systematic analysis and discussion of the experimental results and proposed mechanisms were carried out to demonstrate the composition-dependent sintering properties, mechanical properties and oxidation behavior. The results showed that the in situ synthesized Zr2Al4C5 could be evenly distributed in the ZrB2-SiC ceramic matrix and inhibited the growth of ZrB2 grains, which played a positive role in the sintering densification of the composite ceramics. With increasing Zr2Al4C5 content, the Vickers hardness and Young’s modulus of composite ceramics gradually decreased. The fracture toughness showed a trend that first increased and then decreased, and was increased by about 30% compared with ZrB2-SiC ceramics. The major phases resulting from the oxidation of samples were ZrO2, ZrSiO4, aluminosilicate and SiO2 glass. With increasing Zr2Al4C5 content, the oxidative weight showed a trend that first increased then decreased; the composite ceramic with 30 vol.% Zr2Al4C5 showed the smallest oxidative weight gain. We believe that the presence of Zr2Al4C5 results in the formation of Al2O3 during the oxidation process, subsequently resulting in a lowering of the viscosity of the glassy silica scale, which in turn intensifies the oxidation of the composite ceramics. This would also increase oxygen permeation through the scale, adversely affecting the oxidation resistance of the composites with high Zr2Al4C5 content.
- Open Access
- 12 November 2019
- Published by Walter de Gruyter GmbH in Nanotechnology Reviews
- Vol. 8 (1) , 227-235
Micro- structure and rheological properties of graphene oxide rubber asphalt
Compared with traditional materials, nanomaterial has rich and excellent performance due to the size advantages. If nanotechnology is combined with pavement materials, it is foreseeable that it will have a profound impact on the development of the road. In the study, graphene oxide nanomaterial was added as modifiers to rubber asphalt and its microstructure was characterized. The rheological properties of graphene oxide rubber asphalt and the road performance of asphalt mixture were studied in accordance with the SHRP test. The results showed that graphene oxide could form a dense and stable microstructure with rubber powder and asphalt polymer. As a modifier, it could improve the anti-rutting performance of rubber modified asphalt and was more suitable for heavy traffic. Moreover, it had low sensitivity to temperature and was more suitable for areas with large temperature difference between day and night. The pavement performance of the graphene oxide rubber asphalt mixture had also been greatly improved.
- 12 November 2019
- Published by Walter de Gruyter GmbH in Nanotechnology Reviews
- Vol. 8 (1) , 227-235
Open AccessMicro- structure and rheological properties of graphene oxide rubber asphalt
Compared with traditional materials, nanomaterial has rich and excellent performance due to the size advantages. If nanotechnology is combined with pavement materials, it is foreseeable that it will have a profound impact on the development of the road. In the study, graphene oxide nanomaterial was added as modifiers to rubber asphalt and its microstructure was characterized. The rheological properties of graphene oxide rubber asphalt and the road performance of asphalt mixture were studied in accordance with the SHRP test. The results showed that graphene oxide could form a dense and stable microstructure with rubber powder and asphalt polymer. As a modifier, it could improve the anti-rutting performance of rubber modified asphalt and was more suitable for heavy traffic. Moreover, it had low sensitivity to temperature and was more suitable for areas with large temperature difference between day and night. The pavement performance of the graphene oxide rubber asphalt mixture had also been greatly improved.