Shaowei Zhu
Research Subjects
Shaowei Zhu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Wenping Mou
3 shared publicationsZhenxi Jiang
2 shared publications- Debiao Zeng
Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu 610092, China
1 shared publication Elssawi Yahya
Institute of Advanced Design and Manufacturing, School of Mechanical Engineering, Southwest Jiaotong University, Chengdu, China
1 shared publication- Fuji Wang
School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China
1 shared publication Ge Song
1 shared publication
Latest Publications
- Open Access
- 1 February 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1881
In-Process Tool Condition Forecasting of Drilling CFRP/Ti Stacks Based on ResNet and LSTM Network
Tool condition forecasting (TCF) is a key technology for continuous drilling of CFRP/Ti stacks, as the tool wear is always rapid and severe, which may further induce unexpected drilling quality issues. However, for drilling CFRP/Ti stacks, the cutting spindle power and vibration signals change are complex, influenced by many factors due to the different materials properties. The TCF for drilling CFRP/Ti stacks remains challenging, as the sensitive features are difficult to extract, which decide the accuracy and robustness. Aiming to monitor and forecast tool wear of drilling CFRP/Ti stacks, an in-process TCF method based on residual neural network (ResNet) and long short-term memory (LSTM) network has been proposed in this paper. Using the cutting spindle power and vibration signals preprocessed by the proposed method, the LSTM network with the ResNet-based model integrated can forecast tool-wear values of the next drilling holes. A case study demonstrated the effectiveness of TCF, where the results using raw measured signals and preprocessed datasets are tested for comparison. The mean absolute error (MAE) using raw signals is 45.01 μm, which is 2.20 times bigger than that using preprocess signals. With the proposed method, the data preprocessing for drilling CFRP/Ti stacks can improve the tool-wear forecasting accuracy to MAE 20.43μm level, which meets the demand for online TCF.
- 1 February 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1881
Open AccessIn-Process Tool Condition Forecasting of Drilling CFRP/Ti Stacks Based on ResNet and LSTM Network
Tool condition forecasting (TCF) is a key technology for continuous drilling of CFRP/Ti stacks, as the tool wear is always rapid and severe, which may further induce unexpected drilling quality issues. However, for drilling CFRP/Ti stacks, the cutting spindle power and vibration signals change are complex, influenced by many factors due to the different materials properties. The TCF for drilling CFRP/Ti stacks remains challenging, as the sensitive features are difficult to extract, which decide the accuracy and robustness. Aiming to monitor and forecast tool wear of drilling CFRP/Ti stacks, an in-process TCF method based on residual neural network (ResNet) and long short-term memory (LSTM) network has been proposed in this paper. Using the cutting spindle power and vibration signals preprocessed by the proposed method, the LSTM network with the ResNet-based model integrated can forecast tool-wear values of the next drilling holes. A case study demonstrated the effectiveness of TCF, where the results using raw measured signals and preprocessed datasets are tested for comparison. The mean absolute error (MAE) using raw signals is 45.01 μm, which is 2.20 times bigger than that using preprocess signals. With the proposed method, the data preprocessing for drilling CFRP/Ti stacks can improve the tool-wear forecasting accuracy to MAE 20.43μm level, which meets the demand for online TCF.
- Open Access
- 1 January 2022
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 35 (1) , 204-214
Vibration signal-based chatter identification for milling of thin-walled structure
- 1 January 2022
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 35 (1) , 204-214
Open AccessVibration signal-based chatter identification for milling of thin-walled structure
- Open Access
- 11 March 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-15
A Prediction Model of Cutting Force about Ball End Milling for Sculptured Surface
Cutting force prediction is very important to optimize machining parameters and monitor machining state. In order to predict cutting force of sculptured surface machining with ball end mill accurately, tool posture, cutting edge, contact state between cutter, and workpiece are studied. Firstly, an instantaneous motion model of ball end mill for sculptured surface is established. The instantaneous milling coordinate system and instantaneous tool coordinate system are defined to describe the position and orientation of tool, and the transformation matrix between coordinate systems is derived. Secondly, by solving three boundaries around engagement of cutter and workpiece, a cutter-workpiece engagement model related to tool posture, milling parameters, and tool path is established. It has good adaptability to the variable tool axis relative to the machining surface. Finally, an algorithm of thickness about an instantaneous undeformed chip is researched, and a prediction model of cutting force is realized with microelement cutting theory. Also, the model is suitable for sculptured surface machining with arbitrary tool posture and feed direction. The accuracy of the proposed prediction model was verified by a series of experiments.
- 11 March 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-15
Open AccessA Prediction Model of Cutting Force about Ball End Milling for Sculptured Surface
Cutting force prediction is very important to optimize machining parameters and monitor machining state. In order to predict cutting force of sculptured surface machining with ball end mill accurately, tool posture, cutting edge, contact state between cutter, and workpiece are studied. Firstly, an instantaneous motion model of ball end mill for sculptured surface is established. The instantaneous milling coordinate system and instantaneous tool coordinate system are defined to describe the position and orientation of tool, and the transformation matrix between coordinate systems is derived. Secondly, by solving three boundaries around engagement of cutter and workpiece, a cutter-workpiece engagement model related to tool posture, milling parameters, and tool path is established. It has good adaptability to the variable tool axis relative to the machining surface. Finally, an algorithm of thickness about an instantaneous undeformed chip is researched, and a prediction model of cutting force is realized with microelement cutting theory. Also, the model is suitable for sculptured surface machining with arbitrary tool posture and feed direction. The accuracy of the proposed prediction model was verified by a series of experiments.
- 8 July 2019
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 104 (9-12) , 3457-3471
A study of tool tipping monitoring for titanium milling based on cutting vibration
- 8 July 2019
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 104 (9-12) , 3457-3471
A study of tool tipping monitoring for titanium milling based on cutting vibration
- 9 January 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 228 (10) , 1226-1236
Prediction of machining accuracy based on a geometric error model in five-axis peripheral milling process
Machining accuracy is the most critical indicator to evaluate the machining quality of parts in metal cutting industry. However, it is difficult to be identified before real cutting, because of a variety of error sources presented in a machining process system, such as assembly inaccuracy of machine tool, deformation caused by temperature variation and dynamic cutting force, tool wear, servo lag and so on. Consequently, it is difficult to determine whether a new machining process can satisfy accuracy requirements beforehand. Traditionally, a machining process is validated through the “trial and error” approach, which is time consuming and costly. If machining accuracy can be predicted to a large extent, a rational process can be planned to ensure the precision of parts and even to maximize resource utilization without trial cuts. For this purpose, this work focuses on machining accuracy prediction for five-axis peripheral milling based on the geometric errors. An error synthesis modeling method is proposed to integrate the geometric errors of the process system, including machine tool geometric error, workpiece locating error, cutting tool dimension error and setup error. From a multi-body system point of view, all these errors are synthesized to generate position error of the cutting contact point in the workpiece coordinate system. Then the machining error is obtained by projecting the position error to the workpiece normal vector, which can be measured by a coordinate measuring machine. The prediction model has been evaluated by a cutting test with our in-house-developed prototype software. The result shows that the proposed method is feasible and effective.
- 9 January 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 228 (10) , 1226-1236
Prediction of machining accuracy based on a geometric error model in five-axis peripheral milling process
Machining accuracy is the most critical indicator to evaluate the machining quality of parts in metal cutting industry. However, it is difficult to be identified before real cutting, because of a variety of error sources presented in a machining process system, such as assembly inaccuracy of machine tool, deformation caused by temperature variation and dynamic cutting force, tool wear, servo lag and so on. Consequently, it is difficult to determine whether a new machining process can satisfy accuracy requirements beforehand. Traditionally, a machining process is validated through the “trial and error” approach, which is time consuming and costly. If machining accuracy can be predicted to a large extent, a rational process can be planned to ensure the precision of parts and even to maximize resource utilization without trial cuts. For this purpose, this work focuses on machining accuracy prediction for five-axis peripheral milling based on the geometric errors. An error synthesis modeling method is proposed to integrate the geometric errors of the process system, including machine tool geometric error, workpiece locating error, cutting tool dimension error and setup error. From a multi-body system point of view, all these errors are synthesized to generate position error of the cutting contact point in the workpiece coordinate system. Then the machining error is obtained by projecting the position error to the workpiece normal vector, which can be measured by a coordinate measuring machine. The prediction model has been evaluated by a cutting test with our in-house-developed prototype software. The result shows that the proposed method is feasible and effective.