Vijay Paidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vijay Paidi has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Roger G. Nyberg
School of Information and Engineering, Dalarna University, Borlänge, Sweden
4 shared publications - Johan Håkansson
Dalarna University, Sweden
3 shared publications - Abid Hussain
Department of Digitaflization, Copenhagen Business School, 2000 Copenhagen, Denmark
2 shared publications - Hasan Fleyeh
Dalarna University
2 shared publications - Ravi Vatrapu
Copenhagen Business School
2 shared publications - Teja Hanumolu
Department of Mathematics, University of Chicago, Chicago, IL 60637, USA
2 shared publications
Latest Publications
- Open Access
From Agrivoltaics Design to Energy-System Planning: A Critical Integrative Review
Agrivoltaics (AV) integrates photovoltaic electricity generation with continued agricultural production on the same land. This critical integrative review examines AV as solar-energy infrastructure, focusing on configuration trade-offs, the translation of land and crop outcomes into energy-system variables, techno-economic boundary conditions, and policy and ownership arrangements for scalable deployment. The review covers the literature from the foundational agrivoltaics work published in 1982 onward and combines searches across multiple academic databases with authoritative institutional sources and backward and forward citation chaining. Eligible sources were English-language studies addressing active agricultural production combined with PV, together with relevant authoritative policy, legal, spatial, and energy-planning sources; conventional PV without continued agricultural activity, duplicate reports, non-verifiable commentary, and studies lacking evidence relevant to the review questions were excluded. Selected studies report land equivalent ratios above 1, although differences in crop type, PV configuration, reference systems, land-area accounting, and temporal boundaries preclude interpretation as a pooled effect estimate. The evidence shows that no AV configuration is universally superior: elevated and tracking systems can preserve machinery access and enable dynamic light management but increase structural and operational burden; spaced systems simplify integration but reduce PV capacity density; and vertical-bifacial systems provide distinct generation profiles and potential rear-side gains that depend strongly on site and design conditions. Land-use and economic outcomes are similarly context-dependent, with reported performance sensitive to crop type, climate, reference system, project scale, market conditions, financing, and policy support. The review proposes model-ready AV archetypes that combine geometry, hourly generation, capacity density, crop-retention constraints, costs, policy and ownership conditions. Limitations of this review paper include heterogeneous study designs, uneven geographic coverage, and non-exhaustive database-level tracking.
Open AccessFrom Agrivoltaics Design to Energy-System Planning: A Critical Integrative Review
Agrivoltaics (AV) integrates photovoltaic electricity generation with continued agricultural production on the same land. This critical integrative review examines AV as solar-energy infrastructure, focusing on configuration trade-offs, the translation of land and crop outcomes into energy-system variables, techno-economic boundary conditions, and policy and ownership arrangements for scalable deployment. The review covers the literature from the foundational agrivoltaics work published in 1982 onward and combines searches across multiple academic databases with authoritative institutional sources and backward and forward citation chaining. Eligible sources were English-language studies addressing active agricultural production combined with PV, together with relevant authoritative policy, legal, spatial, and energy-planning sources; conventional PV without continued agricultural activity, duplicate reports, non-verifiable commentary, and studies lacking evidence relevant to the review questions were excluded. Selected studies report land equivalent ratios above 1, although differences in crop type, PV configuration, reference systems, land-area accounting, and temporal boundaries preclude interpretation as a pooled effect estimate. The evidence shows that no AV configuration is universally superior: elevated and tracking systems can preserve machinery access and enable dynamic light management but increase structural and operational burden; spaced systems simplify integration but reduce PV capacity density; and vertical-bifacial systems provide distinct generation profiles and potential rear-side gains that depend strongly on site and design conditions. Land-use and economic outcomes are similarly context-dependent, with reported performance sensitive to crop type, climate, reference system, project scale, market conditions, financing, and policy support. The review proposes model-ready AV archetypes that combine geometry, hourly generation, capacity density, crop-retention constraints, costs, policy and ownership conditions. Limitations of this review paper include heterogeneous study designs, uneven geographic coverage, and non-exhaustive database-level tracking.
- Open Access
- 21 August 2026
- Published by MDPI AG in Preprints.org
Agrivoltaic Systems for Scalable Dual-Use Solar: Configurations, Performance Trade-Offs, Economics, and Policy Pathways
Agrivoltaics (AV) integrates photovoltaic electricity generation with continued agricultural production on the same land. This critical integrative review evaluates AV as solar-energy infrastructure rather than solely as an agronomic intervention. The review was conducted using explicit search terms, eligibility criteria, and a structured appraisal of study design, reporting completeness, representativeness, and uncertainty. This paper’s contribution is a configuration- and context-sensitive synthesis that connects engineering design, land-use performance, techno-economic viability, policy, and equity within a unified energy-systems framework. Across the retained sources, no configuration is universally superior: elevated and tracking systems preserve machinery access but increase structural costs; spaced arrays reduce PV density; and vertical bifacial systems can improve temporal generation profiles, although performance depends strongly on latitude, row spacing, rear-side irradiance, and seasonal albedo. Land equivalent ratios frequently exceed unity, but inconsistent baselines prevent pooled interpretation. Likewise, reported cost premiums and payback periods are not transferable without specifying system configuration, project scale, crop type, electricity price, financing conditions, and policy support. The review identifies four priority gaps: standardized joint PV–crop testing protocols, long-term matched field data, multi-output economic valuation, and explicit representation of AV archetypes and equity constraints in spatial and capacity-expansion models. Scalable deployment requires configuration-specific engineering, measurable agricultural safeguards, coordinated energy and land-use policy, and ownership structures that retain value within farming communities.
- 21 August 2026
- Published by MDPI AG in Preprints.org
Open AccessAgrivoltaic Systems for Scalable Dual-Use Solar: Configurations, Performance Trade-Offs, Economics, and Policy Pathways
Agrivoltaics (AV) integrates photovoltaic electricity generation with continued agricultural production on the same land. This critical integrative review evaluates AV as solar-energy infrastructure rather than solely as an agronomic intervention. The review was conducted using explicit search terms, eligibility criteria, and a structured appraisal of study design, reporting completeness, representativeness, and uncertainty. This paper’s contribution is a configuration- and context-sensitive synthesis that connects engineering design, land-use performance, techno-economic viability, policy, and equity within a unified energy-systems framework. Across the retained sources, no configuration is universally superior: elevated and tracking systems preserve machinery access but increase structural costs; spaced arrays reduce PV density; and vertical bifacial systems can improve temporal generation profiles, although performance depends strongly on latitude, row spacing, rear-side irradiance, and seasonal albedo. Land equivalent ratios frequently exceed unity, but inconsistent baselines prevent pooled interpretation. Likewise, reported cost premiums and payback periods are not transferable without specifying system configuration, project scale, crop type, electricity price, financing conditions, and policy support. The review identifies four priority gaps: standardized joint PV–crop testing protocols, long-term matched field data, multi-output economic valuation, and explicit representation of AV archetypes and equity constraints in spatial and capacity-expansion models. Scalable deployment requires configuration-specific engineering, measurable agricultural safeguards, coordinated energy and land-use policy, and ownership structures that retain value within farming communities.
- Open Access
- 1 July 2025
- Published by SAGE Publications in International Journal of Engineering Business Management
- Vol. 17
On deploying eCOmpass: A decision support tool for environmentally friendly retail locations
Much focus in the joint retailing and transportation domain has been on the transition to e-tailing and the reformation of supply-chain logistics. However, traditional retailing, where consumers visit stores for shopping still dominates and will continue to do so for the foreseeable future. Retailers continuously expand, contract, and reconfigure their store network for strategic reasons. This paper reports on a project aiming to facilitate the incorporation of environmental consequences into the retailer’s reconfiguration decision process. The paper contributes by providing insights and implementation strategies for deploying eCOmpass, leveraging high resolution spatial data to quantify emissions and optimize facility locations. It describes the design and deployment process of eCOmpass, an online decision support tool that enables retailers to estimate the change in transportation-related CO 2 emissions caused by a reconfiguration of their store network. This description encompasses the judgmental choices of data acquisition, optimization technology, and user interface.
- 1 July 2025
- Published by SAGE Publications in International Journal of Engineering Business Management
- Vol. 17
Open AccessOn deploying eCOmpass: A decision support tool for environmentally friendly retail locations
Much focus in the joint retailing and transportation domain has been on the transition to e-tailing and the reformation of supply-chain logistics. However, traditional retailing, where consumers visit stores for shopping still dominates and will continue to do so for the foreseeable future. Retailers continuously expand, contract, and reconfigure their store network for strategic reasons. This paper reports on a project aiming to facilitate the incorporation of environmental consequences into the retailer’s reconfiguration decision process. The paper contributes by providing insights and implementation strategies for deploying eCOmpass, leveraging high resolution spatial data to quantify emissions and optimize facility locations. It describes the design and deployment process of eCOmpass, an online decision support tool that enables retailers to estimate the change in transportation-related CO 2 emissions caused by a reconfiguration of their store network. This description encompasses the judgmental choices of data acquisition, optimization technology, and user interface.
- Open Access
- 22 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 3742
CO2 Emissions Induced by Vehicles Cruising for Empty Parking Spaces in an Open Parking Lot
Parking lots are places of high air pollution as numerous vehicles cruise to find vacant parking places. Open parking lots receive high vehicle traffic, and when limited empty spaces are available it leads to problems, such as congestion, pollution, and driver frustration. Due to lack of return on investment, open parking lots are little studied, and there is a research gap in understanding the magnitude of CO2 emissions and cruising observed at open parking lots. Thus, this paper aims to estimate CO2 emissions and cruising distances observed at an open parking lot. A thermal camera was utilized to collect videos during peak and non-peak hours. The resulting videos were utilized to collect cruising trajectories of drivers searching for empty parking spaces. These trajectories were analyzed to identify optimal and non-optimal cruising, time to park, and walking distances of drivers. A new CO2 model was proposed to estimate emissions in smaller geographical regions, such as open parking lots. The majority of drivers tend to choose parking spaces near a shopping center, and they prefer to cruise non-optimal distances to find an empty parking space near the shopping center. The observed mean non-optimal cruising distance is 2.7 times higher than the mean optimal cruising distance. Excess CO2 emissions and non-optimal cruising were mainly observed during visitor peak hours when there were limited or no empty parking spaces. During visitor peak hours, several vehicles could not find an empty parking space in the region of interest, which also leads to excess cruising.
- 22 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 3742
Open AccessCO2 Emissions Induced by Vehicles Cruising for Empty Parking Spaces in an Open Parking Lot
Parking lots are places of high air pollution as numerous vehicles cruise to find vacant parking places. Open parking lots receive high vehicle traffic, and when limited empty spaces are available it leads to problems, such as congestion, pollution, and driver frustration. Due to lack of return on investment, open parking lots are little studied, and there is a research gap in understanding the magnitude of CO2 emissions and cruising observed at open parking lots. Thus, this paper aims to estimate CO2 emissions and cruising distances observed at an open parking lot. A thermal camera was utilized to collect videos during peak and non-peak hours. The resulting videos were utilized to collect cruising trajectories of drivers searching for empty parking spaces. These trajectories were analyzed to identify optimal and non-optimal cruising, time to park, and walking distances of drivers. A new CO2 model was proposed to estimate emissions in smaller geographical regions, such as open parking lots. The majority of drivers tend to choose parking spaces near a shopping center, and they prefer to cruise non-optimal distances to find an empty parking space near the shopping center. The observed mean non-optimal cruising distance is 2.7 times higher than the mean optimal cruising distance. Excess CO2 emissions and non-optimal cruising were mainly observed during visitor peak hours when there were limited or no empty parking spaces. During visitor peak hours, several vehicles could not find an empty parking space in the region of interest, which also leads to excess cruising.
- Open Access
- 1 January 2022
- Published by Walter de Gruyter GmbH in Journal of Intelligent Systems
- Vol. 31 (1) , 541-554
Short-term prediction of parking availability in an open parking lot
The parking of cars is a globally recognized problem, especially at locations where there is a high demand for empty parking spaces. Drivers tend to cruise additional distances while searching for empty parking spaces during peak hours leading to problems, such as pollution, congestion, and driver frustration. Providing short-term predictions of parking availability would facilitate the driver in making informed decisions and planning their arrival to be able to choose parking locations with higher availability. Therefore, the aim of this study is to provide short-term predictions of available parking spaces with a low volume of data. The open parking lot provides parking spaces free of charge and one such parking lot, located beside a shopping center, was selected for this study. Parking availability data for 21 days were collected where 19 days were used for training, while multiple periods of the remaining 2 days were used to test and evaluate the prediction methods. The test dataset consists of data from a weekday and a weekend. Based on the reviewed literature, three prediction methods suitable for short-term prediction were selected, namely, long short-term memory (LSTM), seasonal autoregressive integrated moving average with exogenous variables (SARIMAX), and the Ensemble-based method. The LSTM method is a deep learning-based method, while SARIMAX is a regression-based method, and the Ensemble method is based on decision trees and random forest to provide predictions. The performance of the three prediction methods with a low volume of data and the use of visitor trends data as an exogenous variable was evaluated. Based on the test prediction results, the LSTM and Ensemble-based methods provided better short-term predictions at multiple times on a weekday, while the Ensemble-based method provided better predictions over the weekend. However, the use of visitor trend data did not facilitate improving the predictions of SARIMAX and the Ensemble-based method, while it improved the LSTM prediction for the weekend.
- 1 January 2022
- Published by Walter de Gruyter GmbH in Journal of Intelligent Systems
- Vol. 31 (1) , 541-554
Open AccessShort-term prediction of parking availability in an open parking lot
The parking of cars is a globally recognized problem, especially at locations where there is a high demand for empty parking spaces. Drivers tend to cruise additional distances while searching for empty parking spaces during peak hours leading to problems, such as pollution, congestion, and driver frustration. Providing short-term predictions of parking availability would facilitate the driver in making informed decisions and planning their arrival to be able to choose parking locations with higher availability. Therefore, the aim of this study is to provide short-term predictions of available parking spaces with a low volume of data. The open parking lot provides parking spaces free of charge and one such parking lot, located beside a shopping center, was selected for this study. Parking availability data for 21 days were collected where 19 days were used for training, while multiple periods of the remaining 2 days were used to test and evaluate the prediction methods. The test dataset consists of data from a weekday and a weekend. Based on the reviewed literature, three prediction methods suitable for short-term prediction were selected, namely, long short-term memory (LSTM), seasonal autoregressive integrated moving average with exogenous variables (SARIMAX), and the Ensemble-based method. The LSTM method is a deep learning-based method, while SARIMAX is a regression-based method, and the Ensemble method is based on decision trees and random forest to provide predictions. The performance of the three prediction methods with a low volume of data and the use of visitor trends data as an exogenous variable was evaluated. Based on the test prediction results, the LSTM and Ensemble-based methods provided better short-term predictions at multiple times on a weekday, while the Ensemble-based method provided better predictions over the weekend. However, the use of visitor trend data did not facilitate improving the predictions of SARIMAX and the Ensemble-based method, while it improved the LSTM prediction for the weekend.
- Open Access
- 23 August 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-12
Tracking Vehicle Cruising in an Open Parking Lot Using Deep Learning and Kalman Filter
Due to the lack of wide availability of parking assisting applications, vehicles tend to cruise more than necessary to find an empty parking space. This problem is evident globally and the intensity of the problem varies based on the demand of parking spaces. It is a well-known hypothesis that the amount of cruising by a vehicle is dependent on the availability of parking spaces. However, the amount of cruising that takes place in search of parking spaces within a parking lot is not researched. This lack of research can be due to privacy and illumination concerns with suitable sensors like visual cameras. The use of thermal cameras offers an alternative to avoid privacy and illumination problems. Therefore, this paper aims to develop and demonstrate a methodology to detect and track the cruising patterns of multiple moving vehicles in an open parking lot. The vehicle is detected using Yolov3, modified Yolo, and custom Yolo deep learning architectures. The detected vehicles are tracked using Kalman filter and the trajectory of multiple vehicles is calculated on an image. The accuracy of modified Yolo achieved a positive detection rate of 91% while custom Yolo and Yolov3 achieved 83% and 75%, respectively. The performance of Kalman filter is dependent on the efficiency of the detector and the utilized Kalman filter facilitates maintaining data association during moving, stationary, and missed detection. Therefore, the use of deep learning algorithms and Kalman filter facilitates detecting and tracking multiple vehicles in an open parking lot.
- 23 August 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-12
Open AccessTracking Vehicle Cruising in an Open Parking Lot Using Deep Learning and Kalman Filter
Due to the lack of wide availability of parking assisting applications, vehicles tend to cruise more than necessary to find an empty parking space. This problem is evident globally and the intensity of the problem varies based on the demand of parking spaces. It is a well-known hypothesis that the amount of cruising by a vehicle is dependent on the availability of parking spaces. However, the amount of cruising that takes place in search of parking spaces within a parking lot is not researched. This lack of research can be due to privacy and illumination concerns with suitable sensors like visual cameras. The use of thermal cameras offers an alternative to avoid privacy and illumination problems. Therefore, this paper aims to develop and demonstrate a methodology to detect and track the cruising patterns of multiple moving vehicles in an open parking lot. The vehicle is detected using Yolov3, modified Yolo, and custom Yolo deep learning architectures. The detected vehicles are tracked using Kalman filter and the trajectory of multiple vehicles is calculated on an image. The accuracy of modified Yolo achieved a positive detection rate of 91% while custom Yolo and Yolov3 achieved 83% and 75%, respectively. The performance of Kalman filter is dependent on the efficiency of the detector and the utilized Kalman filter facilitates maintaining data association during moving, stationary, and missed detection. Therefore, the use of deep learning algorithms and Kalman filter facilitates detecting and tracking multiple vehicles in an open parking lot.
- Open Access
- 2 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Intelligent Transport Systems
- Vol. 14 (10) , 1295-1302
Deep learning‐based vehicle occupancy detection in an open parking lot using thermal camera
Parking has been a common problem over several years in many cities around the globe. The search for parking space leads to congestion, frustration and increased air pollution. Information of vacant parking space would facilitate to reduce congestion and subsequent air pollution. Therefore, the aim of the study is to acquire vehicle occupancy in an open parking lot using deep learning. Thermal camera was used to collect videos during varying environmental conditions and frames from these videos were extracted to prepare the dataset. The frames in the dataset were manually labelled as there were no pre‐labelled thermal images available. Vehicle detection with deep learning algorithms was implemented to perform multi‐object detection. Multiple deep learning networks such as Yolo, Yolo‐conv, GoogleNet, ReNet18 and ResNet50 with varying layers and architectures were evaluated on vehicle detection. ResNet18 performed better than other detectors which had an average precision of 96.16 and log‐average miss rate of 19.40. The detected results were compared with a template of parking spaces to identify vehicle occupancy information. Yolo, Yolo‐conv, GoogleNet and ResNet18 are computationally efficient detectors which took less processing time and are suitable for real‐time detection while Resnet50 was computationally expensive.
- 2 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Intelligent Transport Systems
- Vol. 14 (10) , 1295-1302
Open AccessDeep learning‐based vehicle occupancy detection in an open parking lot using thermal camera
Parking has been a common problem over several years in many cities around the globe. The search for parking space leads to congestion, frustration and increased air pollution. Information of vacant parking space would facilitate to reduce congestion and subsequent air pollution. Therefore, the aim of the study is to acquire vehicle occupancy in an open parking lot using deep learning. Thermal camera was used to collect videos during varying environmental conditions and frames from these videos were extracted to prepare the dataset. The frames in the dataset were manually labelled as there were no pre‐labelled thermal images available. Vehicle detection with deep learning algorithms was implemented to perform multi‐object detection. Multiple deep learning networks such as Yolo, Yolo‐conv, GoogleNet, ReNet18 and ResNet50 with varying layers and architectures were evaluated on vehicle detection. ResNet18 performed better than other detectors which had an average precision of 96.16 and log‐average miss rate of 19.40. The detected results were compared with a template of parking spaces to identify vehicle occupancy information. Yolo, Yolo‐conv, GoogleNet and ResNet18 are computationally efficient detectors which took less processing time and are suitable for real‐time detection while Resnet50 was computationally expensive.
- Open Access
Dynamic Scheduling and Communication System to Manage Last Mile Handovers
Last mile handover is the most problematic phase in the delivery process, while real-time communication and dynamic scheduling are major problem areas associated with attended last mile handovers. These problem areas need to be addressed holistically to facilitate efficient last mile handovers. The aim of this paper is to report the design and functionalities of a decision-support system which holistically addresses these problem areas. The functionalities of decision-support system which addresses dynamic scheduling and real-time communication problem areas are discussed using case studies. We conclude that a holistic decision-support system with multiparty communication among the stakeholders facilitates improving customer satisfaction, business opportunities and reducing operational costs for logistics companies.
Open AccessDynamic Scheduling and Communication System to Manage Last Mile Handovers
Last mile handover is the most problematic phase in the delivery process, while real-time communication and dynamic scheduling are major problem areas associated with attended last mile handovers. These problem areas need to be addressed holistically to facilitate efficient last mile handovers. The aim of this paper is to report the design and functionalities of a decision-support system which holistically addresses these problem areas. The functionalities of decision-support system which addresses dynamic scheduling and real-time communication problem areas are discussed using case studies. We conclude that a holistic decision-support system with multiparty communication among the stakeholders facilitates improving customer satisfaction, business opportunities and reducing operational costs for logistics companies.