RZRichard G. Zytner

Richard G. Zytner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Richard G. Zytner has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Life cycle assessment for the land application of food processing wash‐water and solid residuals

    by Connor Dunlop, Bassim Abbassi, Richard G. Zytner

    A life cycle assessment (LCA) study was completed to understand the environmental impacts associated with the land application of wastes produced from rural food‐processing operations for final disposal. The system boundaries for the two comprised scenarios included the storage of the produced non‐agriculture source material (NASM), transportation to an applicable location, land application of the NASM, and the impacts of the final emissions to the soil and groundwater for a full year. The Tool for the Reduction and Assessment of Chemicals and Other Environmental Impacts (TRACI) v2.1 was selected as the impact assessment method. Furthermore, SimaPro 8.0.4.26 was the LCA model version that was used with all the databases included. Overall, the LCA study showed that the most significant environmental impacts associated with the disposal process resulted from carcinogenic and eutrophication emissions. The component that contributed the most to carcinogenic impacts was found to be from the material required to create the concrete storage tank. Additionally, eutrophication was identified to be a potential significant impact, if proper setback requirements are not followed for the NASM material. Results of the study look to inform stakeholders about the benefits and risks encountered from NASM disposal.Practitioner Points: Life cycle assessment was completed on a representative NASM disposal system using land application. Concrete tank used for storage of NASM had the most significant impact in carcinogenic emissions. Eutrophication impacts were the second most significant impact behind carcinogenic emissions.

  • Open Access

    Three-Dimensional Model for Bioventing: Mathematical Solution, Calibration and Validation

    by Mohammad Khodabakhshi Soureshjani, Hermann J. Eberl, Richard G. Zytner

    Bioventing is an established technique extensively employed in the remediation of soil contaminated with petroleum hydrocarbons. In this study, the objective was to develop an improved foundational bioventing model that characterizes gas flow in vadose zones where aqueous and non-aqueous phase liquid (NAPL) are present and immobile, accounting for interphase mass transfer and first order biodegradation kinetics. By incorporating a correlation for the biodegradation rate constant, which is a function of soil properties including initial population of petroleum degrader microorganisms in soil, sand content, clay content, water content, and soil organic matter content, this model offers the ability to integrate a specific biodegradation rate constant tailored to the soil properties for each site. The governing equations were solved using the finite volume method in OpenFOAM employing the “porousMultiphaseFoam v2107” (PMF) toolbox. The equation describing gas flow in unsaturated soil was solved using a mixed pressure-saturation method, where calculated values were employed to solve the component transport equations. Calibration was done against a set of experimental data for a meso-scale reactor considering contaminant volatilization rate as the pre-calibration parameter and the mass transfer coefficient between aqueous and NAPL phase as the main calibration parameter. The calibrated model then was validated by simulating a large-scale reactor. The modelling results showed an error of 2.9% for calibrated case and 4.7% error for validation case which present the fitness to the experimental data, proving that the enhanced bioventing model holds the potential to improve predictions of bioventing and facilitate the development of efficient strategies to remediate soil contaminated with petroleum hydrocarbons.

  • Improved NASM framework for the land application of food processing wash-water and solid residuals

    by Connor Dunlop, Bassim Abbassi, Richard G. Zytner

    The land application of food-processing wash-waters provides valuable nutrients and soil organic matter to agriculture lands if properly applied. Many jurisdictions have processes in place to ensure that land application provides positive benefits while protecting the environment. However, Ontario food processors have indicated that the land application regulations for wastes are overly burdensome and hindering economic opportunities. Therefore, research was completed to identify potential improvements to Ontario’s land application framework. The research revealed that Ontario has one of the best regulatory frameworks for land application compared to other North American jurisdictions. Ontario’s documents are easy to find and navigate, but the standards are overly burdensome for lower risk sources of waste. For example, high-risk sources for pathogens and heavy metals such as sewage wastewater are grouped with lower risk sources such as food-processing wash-waters. Potential improvements are presented, including decreased sampling frequencies.

  • Improved NASM Framework for Food Processing Wash-Water and Solid Residuals

    by Richard G. Zytner, Connor Dunlop, Bassim Abbassi

  • Open Access

    Developing a Robust Bioventing Model

    by Mohammad Khodabakhshi Soureshjani, Richard G. Zytner

    Bioventing is a widely recognized technique for the remediation of petroleum hydrocarbon-contaminated soil. In this study, the objective was to identify an optimal mathematical model that balances accuracy and ease of implementation. A comprehensive review of various models developed for bioventing was conducted wherein the advantages and disadvantages of each model were evaluated and compared regarding the different numerical methods used to solve relevant bioventing equations. After investigating the various assumptions and methods from the literature, an improved foundational bioventing model was developed that characterizes gas flow in unsaturated zones where water and non-aqueous phase liquid (NAPL) are present and immobile, accounting for interphase mass transfer and biodegradation, incorporating soil properties through a rate constant correlation. The proposed model was solved using the finite volume method in OpenFOAM, an independent dimensional open-source coding toolbox. The preliminary simulation results of a simple case indicate good agreement with the exact analytical solution of the same equations. This improved bioventing model has the potential to enhance predictions of the remediation process and support the development of efficient remediation strategies for petroleum hydrocarbon-contaminated soil.


  • Open Access

    Recovery and Reuse of Valuable Chemicals Derived from Hydrothermal Carbonization Process Liquid

    by Abu-Taher Jamal-Uddin, M. Toufiq Reza, Omid Norouzi, Shakirudeen A. Salaudeen, Animesh Dutta, Richard G. Zytner

    Recovery and reuse of valuable chemicals from hydrothermal carbonization process liquid (HTC-PL) from tomato plant biomass (TPB) was conducted. Different HTC-PLs were characterized with FTIR and Py-GC-MS analyses revealing the presence of low molecular weight linear, cyclic, and aromatics compounds in the HTC-PL. Separation of these valuable chemicals by fractional distillation resulted in eutectic constrains. Solvent extraction separation followed by solvent recovery and reuse provided encouraging results. The non-polar portion of HTC-PLs were extracted by using n-hexane (C6H14), and diethyl ether (C2H5)2O solvents with 8.5 and 4.3% recoveries, respectively. Characterization by FTIR and Py-GC-MS revealed petrol fuel like materials in the extracts of C6H14 and (C2H5)2O, irrespective of higher boiling components. Blends of both non-polar extracts were flame tested revealing good burning characteristics with minimal smoke and residue. Bench scale spirit lamp tests showed the blend would be very useful for greenhouse winter heating. The polar extracts using methylene chloride (CH2Cl2) resulted in about 55% recovery. Py-GC-MS analysis revealed acetic acid and 5-Hydroxymethyl furfural (5HMF) majors in the extract along with related derivatives. 5HMF is a valued chemical and demonstrated to be a useful building block for many industrial applications, and flatform chemical for various synthesis. Other identified minor components of HTC-PL were vanillin, divinyl terephthalate, and syringol. After the extractions of polar and non-polar components in three steps, the HTC-PL residue was applied as nutrient source after maintaining pH (5.6) and concentration (TOC, 100–200 mg/L) to typical greenhouse plants. Plant growth was encouraging. The paper discusses all the potential valued reuse applications of HTC-PL in greenhouses without discharges, which contributes to environmental protection and economic benefits.


  • Open Access

    Treatment and Recycle of Greenhouse Nutrient Feed Water Applying Hydrochar and Activated Carbon Followed by Reverse Osmosis

    by Abu-Taher Jamal-Uddin, Takashi Matsuura, Fadi Al-Daoud, Richard G. Zytner

    Leached greenhouse nutrient feed (GNF) water is a great challenge for greenhouse (GH) producers. Unbalanced higher micronutrient metal’s phytotoxicity impact GH plant growth, and the high phosphorous levels can cause lake eutrophication if not treated. The analytical results of three GNFs revealed no microbial contamination in any of the GNFs, but the potassium, calcium, magnesium levels, and pH range were above the target level for root zone conditions. Both higher and lower limit concentrations are phytotoxic, causing poor or non-developed roots, leaves, and stems. Sodium was also not in the balanced range. Phosphate and nitrate nutrients were above the measurable range, showing that it would be a threat to lake eutrophication if disposed of. Due to uptake by plants at varied rates, nutrient ion imbalance in GNF is usual, but proper control or treatment is essential as GNF is not a waste but a resource providing fertilization to plants. Potential treatment options investigated include coagulation filtration, sorption with hydrochar (HC), and activated carbon (AC), followed by reverse osmosis (RO) membrane filtration. The HC and AC were produced from waste tomato plants biomass (TPB) of the same GHs to enhance the recycle–reuse of wastes. Neither metals nor nutrient concentrations were reduced to the desired levels by coagulation treatments. The HC and AC treatment provided the recycle–reuse possibility of GNF. RO membrane filtration provided about 97–99% reduction of metals and 99% reduction of nutrients, allowing GNF preparation by adding new fertilizer to the RO permeate. In such a case, the RO reject needs to be reused as feed for TPB carbonization. Different options for GHs to manage TPB and GNF are provided. As RO is an energy-expensive process, an assessment of technical know-how to provide an energy economic process is demonstrated.


  • Mitigating Fugitive Methane Emissions from Closed Landfills: A Pilot-Scale Field Study

    by B. R. Nelson, R. G. Zytner, Z. L. Kanmacher, A. Yochim, R. Vaillancourt, B. Boss, Y. Dulac, A. R. Cabral

  • Mitigating fugitive methane emissions from closed landfills: A pilot-scale field study

    by Brienne Nelson, Richard G. Zytner, Yohan Dulac, Alexandre R. Cabral