YTYunfei Teng

Yunfei Teng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yunfei Teng has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A generalizable codesigned platform for solid-state nanopore sensing beyond the capacitive-noise constraints

    by Nianduo Cai, Wei Guo, Yunfei Teng, Yameng Lou, Siu-Ho Wong, Akhil Sai Naidu, Filippo Cona, Federico Thei, Tzu-Heng Chen, Maartje Bastings, et al.

    Solid-state nanopores offer label-free, real-time single-molecule sensing, yet resolving rapidly translocating biomolecules requires high-bandwidth data acquisition, where increased high-frequency noise fundamentally limits reliable recovery of informative events. Here we establish a hardware-software co-designed nanopore sensing platform that overcomes this bandwidth-noise limitation by integrating scalable low-noise device engineering with deep learning-based signal reconstruction. A wafer-scale dielectric-engineering strategy using low-dielectric SU8 photoresist reduces total device capacitance to the picofarad regime and suppresses high-frequency noise by up to fivefold while maintaining facile, controllable and reproducible fabrication. This extends usable acquisition rate to 40 MHz and enables capture of fast molecular features. Combined with a reconstruction neural network trained on synthetic translocation signals embedded in experimentally measured noise, the platform recovers transient blockade sublevels while preserving temporal fidelity. Using engineered DNA molecules carrying dumbbell-like barcodes, we resolve nanometer-scale structural features on sub-microsecond timescales, and experimentally measure translocation velocity within the sub-5 nm regime. Dual-channel measurement on a single nanopore device further demonstrates transferability of the platform by showing robust cross-channel signal reconstruction across distinct baseline noise levels. This platform provides a general route for reliable recovery of previously inaccessible molecular information from high-bandwidth nanopore measurements.

  • Open Access

    All-water supercapacitor enabled by 1-nm clay channels

    by Vasily Artemov, Svetlana Babiy, Yunfei Teng, Jiaming Ma, Alexander Ryzhov, Tzu-Heng Chen, Lucie Navratilova, Victor Boureau, Pascal Schouwink, Mariia Liseanskaia, et al.

    Water confined to channels one nanometer thick exhibits electrochemical behavior distinct from bulk water, including enhanced protonic conductivity and large dielectric anisotropy. Here, we exploit these characteristics to design a scalable electrochemical energy storage system-a “blue capacitor”-constructed entirely from naturally abundant materials. By assembling layered clays and conductive graphene, we produce 1-nm-thick channels in which confined water acts as the sole electrolyte. We systematically study different clay types, the electrode composition, and separator thickness using complementary physicochemical and electrochemical techniques. The device operates stably up to 1.6 ± 0.1 V, achieves specific capacitances of 40 F g −1 , 97 ± 2% coulombic efficiency, and stable performance over more than 60,000 charge-discharge cycles at a voltage window of 1 V and a scan rate of 10 mA. Structural and dynamic analyses validate the device architecture, water purity, and proton transport in the nanopores. These results demonstrate that nanoconfined water can function as an electrolyte in a macroscopic electrochemical device, providing a platform for exploring sustainable aqueous energy storage systems.


  • Open Access

    Charge and slip-length optimization in lipid-bilayer-coated nanofluidics for enhanced osmotic energy harvesting

    by Yunfei Teng, Tzu-Heng Chen, Nianduo Cai, Pratik Saud, Peiyue Li, Akhil Sai Naidu, Victor Boureau, Aleksandra Radenovic

    Osmotic energy, also known as blue energy, is a promising renewable power source that can harness natural salinity gradients. Emerging nanofluidic systems realize direct conversion of this energy to electricity via the reversed electrodialysis process. However, achieving precise structural control, solid–liquid interface regulation and scalable demonstration for enhanced osmotic conversion in a nanofluidic system simultaneously remains a challenge. Here we develop a liquidized coating-functionalized nanofluidic system by combining scalable semiconductor microfabrication with a self-assembled lipid bilayer in nanoconfined environments. This hybrid platform enables precise structural control and interfacial regulation by coupling hydration lubrication with ultrahigh surface charge density. A numerical framework shows that the synergy between surface charge and slip length enhances ion transport and charge separation. Extending this strategy to a membrane-scale system (108 cm−2 porosity, 314 µm2) yields an osmotic power density of ~51.4 kW m−2. This work outlines a promising framework for next-generation nanofluidic energy harvesting.


  • Open Access

    Nanopore Trap for Label‐Free Fingerprinting of Surface‐modified Single Nanoparticles

    by Nianduo Cai, Tzu‐Heng Chen, Yunfei Teng, Akhil Sai Naidu, Aleksandra Radenovic

    Label‐free characterization of nanoparticle surface functionalization at single‐particle resolution is essential for a wide range of applications. Solid‐state nanopore sensing provides a direct electrical readout that is intrinsically sensitive to the size, surface layer, and interfacial chemistry of single particles in liquid environments. The trapping‐based nanopore sensing regime further enables probing surface‐dependent particle‐pore interactions with extended observation time. Here, a solid‐state nanopore trap‐based fingerprinting method is presented to differentiate single nanoparticles with distinct surface modifications. The method combines a “trap‐release” measurement protocol with a multi‐metric analysis workflow that extracts blockade distributions, sub‐level statistics and frequency‐domain signatures from trapping events, and constructs a unique fingerprint for each particle species. Applied to silica cores (≈25–30 nm) functionalized with APTES, NHS‐PEG 4 ‐Biotin and Tween‐20, the approach generates distinct fingerprints that map to surface charge, coating conformation and configuration heterogeneity. Moreover, in situ detection of surface chemical transformation via specific streptavidin binding is demonstrated, with stoichiometry‐dependent progression of the fingerprints. This platform provides a complementary tool to optical, spectral and ensemble assays for characterizing engineered nanoparticle surfaces and tracking interfacial molecular interactions in solution with label‐free and single‐particle sensitivity.


  • Top Cited Papers
    Open Access

    Nanofluidic logic with mechano–ionic memristive switches

    by Theo Emmerich, Yunfei Teng, Nathan Ronceray, Edoardo Lopriore, Riccardo Chiesa, Andrey Chernev, Vasily Artemov, Massimiliano Di Ventra, Andras Kis, Aleksandra Radenovic

    Neuromorphic systems are typically based on nanoscale electronic devices, but nature relies on ions for energy-efficient information processing. Nanofluidic memristive devices could thus potentially be used to construct electrolytic computers that mimic the brain down to its basic principles of operation. Here we report a nanofluidic device that is designed for circuit-scale in-memory processing. The device, which is fabricated using a scalable process, combines single-digit nanometric confinement and large entrance asymmetry and operates on the second timescale with a conductance ratio in the range of 9 to 60. In operando optical microscopy shows that the memory capabilities are due to the reversible formation of liquid blisters that modulate the conductance of the device. We use these mechano–ionic memristive switches to assemble logic circuits composed of two interactive devices and an ohmic resistor.


  • Open Access

    Nature‐Inspired Stalactite Nanopores for Biosensing and Energy Harvesting

    by Andrey Chernev, Yunfei Teng, Mukeshchand Thakur, Victor Boureau, Lucie Navratilova, Nianduo Cai, Tzu‐Heng Chen, Liping Wen, Vasily Artemov, Aleksandra Radenovic

    Nature provides a wide range of self‐assembled structures from the nanoscale to the macroscale. Under the right thermodynamic conditions and with the appropriate material supply, structures like stalactites, icicles, and corals can grow. However, the natural growth process is time‐consuming. This work demonstrates a fast, nature‐inspired method for growing stalactite nanopores using heterogeneous atomic deposition of hafnium dioxide at the orifice of templated silicon nitride apertures. The stalactite nanostructures combine the benefits of reduced sensing region typically for 2‐dimensional material nanopores with the asymmetric geometry of capillaries, resulting in ionic selectivity, stability, and scalability. The proposed growing method provides an adaptable nanopore platform for basic and applied nanofluidic research, including biosensing, energy science, and filtration technologies.


  • Open Access

    High durability and stability of 2D nanofluidic devices for long-term single-molecule sensing

    by Mukeshchand Thakur, Nianduo Cai, Miao Zhang, Yunfei Teng, Andrey Chernev, Mukesh Tripathi, Yanfei Zhao, Michal Macha, Farida Elharouni, Martina Lihter, et al.

    Nanopores in two-dimensional (2D) membranes hold immense potential in single-molecule sensing, osmotic power generation, and information storage. Recent advances in 2D nanopores, especially on single-layer MoS2, focus on the scalable growth and manufacturing of nanopore devices. However, there still remains a bottleneck in controlling the nanopore stability in atomically thin membranes. Here, we evaluate the major factors responsible for the instability of the monolayer MoS2 nanopores. We identify chemical oxidation and delamination of monolayers from their underlying substrates as the major reasons for the instability of MoS2 nanopores. Surface modification of the substrate and reducing the oxygen from the measurement solution improves nanopore stability and dramatically increases their shelf-life. Understanding nanopore growth and stability can provide insights into controlling the pore size, shape and can enable long-term measurements with a high signal-to-noise ratio and engineering durable nanopore devices.


  • Synergy of light and acid–base reaction in energy conversion based on cellulose nanofiber intercalated titanium carbide composite nanofluidics

    by Pei Liu, Teng Zhou, Linsen Yang, Congcong Zhu, Yunfei Teng, Xiang-Yu Kong, Liping Wen

    Employing chemical-potential with reverse electrodialysis is a sustainable way to generate electricity. Based on this observation, efforts have been made to utilize this energy, such as the development of nanomaterials and the introduction of external fields. However, the reported systems mainly focus on a single type of physical field on the enhancement of energy conversion but ignore the synergy between cross-factor types. Here, we report a light and acid–base reaction enhanced energy conversion system based on 1D/2D composite nanofluidics. The contributions of light (physical) and acid–base reaction (chemical) in a chemical-potential-driven ionic generation system are studied separately and jointly. With the synergistic effect of the joint system, the output power density increases to 87.23 W m−2, exceeding the output power density of the state-of-the-art membrane-based systems. Both experimental and theoretical results indicate that the physical–chemical synergistic effect can significantly improve the magnitude of ionic migration. Hence, our work demonstrates the vast potential of a physical–chemical synergistic assistant factor in the enhancement of chemical-potential-driven energy conversion.


  • Open Access

    Inside Front Cover: Ultra‐Sensitive and Selective Electrochemical Bio‐Fluid Biopsy for Oral Cancer Screening (Small Methods 5/2021)

    by Zuohui Xiao, Chenyan Huang, Shengjie Jiang, Xiangyu Kong, Yunfei Teng, Bo Niu, CongCong Zhu, Weiwen Xin, Xiaohui Chen, Liping Wen, et al.

  • Open Access

    Bioinspired nervous signal transmission system based on two-dimensional laminar nanofluidics: From electronics to ionics

    by Yunfei Teng, Pei Liu, Lin Fu, Xiang-Yu Kong, Lei Jiang, Liping Wen

    Significance: Mammalian nervous systems, as natural ionic circuitries, have interested researchers with their powerful abilities in environmental perceptions and information transmission, which triggered booming development in artificial prototypes such as biomimetic ionic nanochannels. Most studied artificial ionic systems are more focused on their functions of perception, whereas the ionic information transmission system is rarely reported. Here, two-dimensional laminar nanofluidics are fabricated from MXene nanosheets and the noncontact external electrostatic potential applied patterns to generate and transmit alternating signals, from basic sine to frequency-modulated binary information. This work demonstrates the potentiality of bioinspired nervous signal transmission to simulate the neural ion-carried information system, which might lead to the avenue of alternating current ionics.