Yanyi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yanyi Wang has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Jianjun Yu
Fudan University
23 shared publications - Wen Zhou
Fudan University
19 shared publications - Junjie Ding
Purple Mountain Laboratories, Nanjing, Jiangsu, China
18 shared publications - Weiping Li
Fudan University
15 shared publications - Feng Zhao
School of Electronic Engineering, Xian University of Posts and Telecommunications, Xian, China
13 shared publications - Kaihui Wang
Fudan University
11 shared publications
Latest Publications
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 364-376
Beyond 500 GHz THz Wireless Links Based on Heterodyne Photomixing and Absolute Operation Pruned Two-Stage MIMO–Volterra
Compared to the traditional Volterra nonlinear equalizer (VNE), the multi-input, multi-output (MIMO) VNE is capable of addressing the signal degradation caused by higher-order crosstalk. Naturally, the gains from the MIMO architecture are at the cost of doubling the amount of computation. To reduce the calculation workload, based on the two-stage serial-parallel MIMO architecture, the absolute operation of the cross-beating terms and the pruning technique, an extremely low-complexity MIMO VNE, namely absolute-term pruned two-stage (AT-P-2S) MIMO VNE, has been proposed in this research. With the proposed AT-P-2S MIMO VNE and optical mixing technique, terahertz wave transmission over 500 GHz is successfully demonstrated. The experimental results show that the AT-P-2S-MIMO VNE demonstrates very comparable BER performance to the MIMO VNE, and can achieve more than 4% capacity improvement in the beyond-500 GHz band. Meanwhile, in contrast to MIMO VNE, AT-P-2S MIMO VNE can reduce the equalizer real multiplication operation by more than 94%. By striking a balance between performance and complexity, the proposed AT-P-2S- MIMO VNE offers an appealing solution to enhance the efficiency and effectiveness of future communication systems.
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 364-376
Beyond 500 GHz THz Wireless Links Based on Heterodyne Photomixing and Absolute Operation Pruned Two-Stage MIMO–Volterra
Compared to the traditional Volterra nonlinear equalizer (VNE), the multi-input, multi-output (MIMO) VNE is capable of addressing the signal degradation caused by higher-order crosstalk. Naturally, the gains from the MIMO architecture are at the cost of doubling the amount of computation. To reduce the calculation workload, based on the two-stage serial-parallel MIMO architecture, the absolute operation of the cross-beating terms and the pruning technique, an extremely low-complexity MIMO VNE, namely absolute-term pruned two-stage (AT-P-2S) MIMO VNE, has been proposed in this research. With the proposed AT-P-2S MIMO VNE and optical mixing technique, terahertz wave transmission over 500 GHz is successfully demonstrated. The experimental results show that the AT-P-2S-MIMO VNE demonstrates very comparable BER performance to the MIMO VNE, and can achieve more than 4% capacity improvement in the beyond-500 GHz band. Meanwhile, in contrast to MIMO VNE, AT-P-2S MIMO VNE can reduce the equalizer real multiplication operation by more than 94%. By striking a balance between performance and complexity, the proposed AT-P-2S- MIMO VNE offers an appealing solution to enhance the efficiency and effectiveness of future communication systems.
- Open Access
- 1 June 2023
- Published by KEAI Publishing in Digital Communications and Networks
- Vol. 9 (3) , 717-722
352-Gbit/s single line rate THz wired transmission based on PS-4096QAM employing hollow-core fiber
- 1 June 2023
- Published by KEAI Publishing in Digital Communications and Networks
- Vol. 9 (3) , 717-722
Open Access352-Gbit/s single line rate THz wired transmission based on PS-4096QAM employing hollow-core fiber
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 5004-5018
23.1-Gb/s 135-GHz Wireless Transmission Over 4.6-Km and Effect of Rain Attenuation
In this article, we have experimentally demonstrated a fiber-wireless-integration $D$ -band (110–170 GHz) transmission system. To extend the wireless transmission distance while maintaining the wireless bit rate as high as possible, we designed high-gain lens horn antenna modules consisting of a pair of dielectric plano-convex lenses and horn antennas for long-haul wireless links. In addition, we employ the Volterra nonlinear equalization (VNE) algorithm based on the multiple-input–multiple-output (MIMO) structure to precisely compensate for the in-phase/quadrature (I/Q) imbalance and nonlinear impairment of quadrature amplitude modulation (QAM) signals mainly caused by photoelectric (O-E) conversion and electric-photo (E-O) conversion. Meanwhile, one of the methods adopted in our experiment to decrease the influence of nonlinearity on high-order QAM signals is coupling the high-order modulation format with the probabilistic shaping (PS) technology. As a result of outdoor field experimental verification, the demonstration at 135 GHz carrier with a net rate of 23.1 Gb/s over 10 km optic-fiber and 4.6 km wireless transmission distance has been successfully carried out. It is, as we know, the first time that a record-breaking product of net bit rate and wireless transmission distance, i.e., 23.1 Gb/s $\times$ 4.6 km $=$ 106.3 Gb/s $\cdot$ km, has been accomplished based on a fiber-wireless-integration system. Also, for the first time, we have measured the effect of rain attenuation for the 135 GHz millimeter-wave (mm-wave) wireless link and established more accurate rainfall models for the Shanghai region of China by comparing them with multiple rainfall models. This work can be used as a complement to the International Telecommunication Union-Radiocommunication sector (ITU-R) recommendations.
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 5004-5018
23.1-Gb/s 135-GHz Wireless Transmission Over 4.6-Km and Effect of Rain Attenuation
In this article, we have experimentally demonstrated a fiber-wireless-integration $D$ -band (110–170 GHz) transmission system. To extend the wireless transmission distance while maintaining the wireless bit rate as high as possible, we designed high-gain lens horn antenna modules consisting of a pair of dielectric plano-convex lenses and horn antennas for long-haul wireless links. In addition, we employ the Volterra nonlinear equalization (VNE) algorithm based on the multiple-input–multiple-output (MIMO) structure to precisely compensate for the in-phase/quadrature (I/Q) imbalance and nonlinear impairment of quadrature amplitude modulation (QAM) signals mainly caused by photoelectric (O-E) conversion and electric-photo (E-O) conversion. Meanwhile, one of the methods adopted in our experiment to decrease the influence of nonlinearity on high-order QAM signals is coupling the high-order modulation format with the probabilistic shaping (PS) technology. As a result of outdoor field experimental verification, the demonstration at 135 GHz carrier with a net rate of 23.1 Gb/s over 10 km optic-fiber and 4.6 km wireless transmission distance has been successfully carried out. It is, as we know, the first time that a record-breaking product of net bit rate and wireless transmission distance, i.e., 23.1 Gb/s $\times$ 4.6 km $=$ 106.3 Gb/s $\cdot$ km, has been accomplished based on a fiber-wireless-integration system. Also, for the first time, we have measured the effect of rain attenuation for the 135 GHz millimeter-wave (mm-wave) wireless link and established more accurate rainfall models for the Shanghai region of China by comparing them with multiple rainfall models. This work can be used as a complement to the International Telecommunication Union-Radiocommunication sector (ITU-R) recommendations.
- Top Cited Papers
- 6 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (11) , 3332-3349
Broadband Photon-Assisted Terahertz Communication and Sensing
Terahertz band (0.1 to 10 THz) with high carrier frequency and large available bandwidth has become a promising candidate to meet the 100 Gbit/s or even 1 Tbit/s data rate required by the future six-generation (6G) mobile communication networks. Compared with the all-electrical methods to generate terahertz signals, the photon-assisted technology can break the bottleneck of the bandwidth limit of the electronics devices, and generate the terahertz signal with high frequency, large bandwidth, flexible tunability and easy integration with the large capacity fiber link. In this paper, we introduce the typical methods to generate terahertz signals based on the photon-assisted technology, and review the representative achievements in different areas of terahertz communication, such as the large capacity terahertz transmission, the long distance terahertz transmission, the real-time terahertz communication, and the integrated terahertz sensing and communication. Based on the photon-assisted technology and various key techniques, devices and advanced digital signal processing (DSP) algorithms, we have obtained many great achievements in broadband terahertz communication and sensing, and the experimental setups and results have also been demonstrated in detail.
- 6 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (11) , 3332-3349
Top Cited PapersBroadband Photon-Assisted Terahertz Communication and Sensing
Terahertz band (0.1 to 10 THz) with high carrier frequency and large available bandwidth has become a promising candidate to meet the 100 Gbit/s or even 1 Tbit/s data rate required by the future six-generation (6G) mobile communication networks. Compared with the all-electrical methods to generate terahertz signals, the photon-assisted technology can break the bottleneck of the bandwidth limit of the electronics devices, and generate the terahertz signal with high frequency, large bandwidth, flexible tunability and easy integration with the large capacity fiber link. In this paper, we introduce the typical methods to generate terahertz signals based on the photon-assisted technology, and review the representative achievements in different areas of terahertz communication, such as the large capacity terahertz transmission, the long distance terahertz transmission, the real-time terahertz communication, and the integrated terahertz sensing and communication. Based on the photon-assisted technology and various key techniques, devices and advanced digital signal processing (DSP) algorithms, we have obtained many great achievements in broadband terahertz communication and sensing, and the experimental setups and results have also been demonstrated in detail.
- 28 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 4010-4016
High Spectral Efficiency Photonics-Based Polarization Multiplexing OFDM Signal Delivery at W-Band
We have implemented a large-capacity, long-haul, and high spectral efficiency photonics-based polarization multiplexing communication system at W-band. The signal delivery up to 119.1 Gb/s with spectral efficiency of 9.9 bit/s/Hz is achieved over a 10 km optic-fiber link and 4600 m wireless link. In our study, we utilize an orthogonal frequency division multiplexing (OFDM) scheme to compensate for the signal impairments caused by the dispersion effect and the wireless multipath effect. Based on a pair of antennas, the antenna polarization multiplexing technique is used to realize the polarization-multiplexed mm-wave signal delivery. Also, only one communication link is required, instead of the complex 2×2 line-of-sight multiple-input multiple-output (MIMO) link. Instead of Cassegrain antennas, the combination of plano-convex lens and horn antenna greatly extends the wireless distance. For increasing the spectral efficiency and throughput of the communication system, we employ higher-order modulation formats, probabilistic shaping (PS) techniques, and a series of equalization algorithms. Based on photonics technology, we have created a record-setting distance-rate product of 547.9 Gb/s•km (119.1 Gb/s × 4.6 km) for an independent channel at W-band.
- 28 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (12) , 4010-4016
High Spectral Efficiency Photonics-Based Polarization Multiplexing OFDM Signal Delivery at W-Band
We have implemented a large-capacity, long-haul, and high spectral efficiency photonics-based polarization multiplexing communication system at W-band. The signal delivery up to 119.1 Gb/s with spectral efficiency of 9.9 bit/s/Hz is achieved over a 10 km optic-fiber link and 4600 m wireless link. In our study, we utilize an orthogonal frequency division multiplexing (OFDM) scheme to compensate for the signal impairments caused by the dispersion effect and the wireless multipath effect. Based on a pair of antennas, the antenna polarization multiplexing technique is used to realize the polarization-multiplexed mm-wave signal delivery. Also, only one communication link is required, instead of the complex 2×2 line-of-sight multiple-input multiple-output (MIMO) link. Instead of Cassegrain antennas, the combination of plano-convex lens and horn antenna greatly extends the wireless distance. For increasing the spectral efficiency and throughput of the communication system, we employ higher-order modulation formats, probabilistic shaping (PS) techniques, and a series of equalization algorithms. Based on photonics technology, we have created a record-setting distance-rate product of 547.9 Gb/s•km (119.1 Gb/s × 4.6 km) for an independent channel at W-band.
- 8 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (5) , 1278-1285
Echo State Network Based Nonlinear Equalization for 4.6 km 135 GHz D-Band Wireless Transmission
Reservoir computing (RC) is a novel computational framework derived from recurrent neural networks (RNN). It can reduce the training complexity of RNN and is suitable for time-series learning tasks. The echo state network (ESN) is one of the most popular forms of RC. In this paper, an ESN-based equalizer is applied to perform signal equalization in a wireless D-band communication system to compensate for the nonlinear distortion. Based on the photonics-based technology and multiple amplifiers, a long-range wireless transmission system is successfully established at D-band. We experimentally demonstrated that our proposed wireless transmission link can realize up to 4.6-km wireless delivery of over 8 Gbit/s quadrature phase shift keying (QPSK) millimeter-wave signal at 135 GHz with a bit-error-rate (BER) less than the hard decision forward error correction (HD-FEC) threshold of 3.8×10 −3 . Compared with the traditional CMA equalizer and the Volterra equalizer, the experimental results show that the ESN-based equalizer can achieve a better balance between the BER performance and the computational complexity.
- 8 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (5) , 1278-1285
Echo State Network Based Nonlinear Equalization for 4.6 km 135 GHz D-Band Wireless Transmission
Reservoir computing (RC) is a novel computational framework derived from recurrent neural networks (RNN). It can reduce the training complexity of RNN and is suitable for time-series learning tasks. The echo state network (ESN) is one of the most popular forms of RC. In this paper, an ESN-based equalizer is applied to perform signal equalization in a wireless D-band communication system to compensate for the nonlinear distortion. Based on the photonics-based technology and multiple amplifiers, a long-range wireless transmission system is successfully established at D-band. We experimentally demonstrated that our proposed wireless transmission link can realize up to 4.6-km wireless delivery of over 8 Gbit/s quadrature phase shift keying (QPSK) millimeter-wave signal at 135 GHz with a bit-error-rate (BER) less than the hard decision forward error correction (HD-FEC) threshold of 3.8×10 −3 . Compared with the traditional CMA equalizer and the Volterra equalizer, the experimental results show that the ESN-based equalizer can achieve a better balance between the BER performance and the computational complexity.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (23) , 1269-1272
Photonics-Aided Terahertz-Wave Wireless Communication Employing Advanced Post-Equalizer
In this letter, a novel MIMO linear and Volterra nonlinear equalizer (MIMOL-VNLE) is proposed for signal recovery in the photonics-aided terahertz wave (THz-wave) wireless communication system, which is proven to compensate for linear impairments, nonlinear impairments, and I/Q mixing effects simultaneously. Adopting the proposed algorithm, we experimentally demonstrated the single-channel transmission of 20-Gbaud 16-ary quadrature amplitude modulation (16QAM) THz-wave signal at 440-GHz over 1-m wireless distance.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (23) , 1269-1272
Photonics-Aided Terahertz-Wave Wireless Communication Employing Advanced Post-Equalizer
In this letter, a novel MIMO linear and Volterra nonlinear equalizer (MIMOL-VNLE) is proposed for signal recovery in the photonics-aided terahertz wave (THz-wave) wireless communication system, which is proven to compensate for linear impairments, nonlinear impairments, and I/Q mixing effects simultaneously. Adopting the proposed algorithm, we experimentally demonstrated the single-channel transmission of 20-Gbaud 16-ary quadrature amplitude modulation (16QAM) THz-wave signal at 440-GHz over 1-m wireless distance.
- Open Access
Reflection Characteristics Measurements of Indoor Wireless Link in D-Band
For the millimeter wave (mm-Wave) and terahertz (THz) indoor wireless communication system, the reflection channels need to be characterized and modeled. In this paper, the reflection measurements of the parallel polarized wave are carried out under multiple incident angles and five kinds of materials in the D-band (110–170 GHz). A modified reflection model with two parameters estimated by the minimum mean square error (MMSE) criterion is proposed. The results show that the measurements are in good agreement with the proposed model. Furthermore, a set of measured properties is demonstrated and it can be concluded that both the reflection coefficients and relative permittivity gradually decrease, whereas the surface roughness increases slightly with the increasing frequency, indicating a weak frequency dependence. Interestingly, the concrete board with high surface roughness, which means more power loss in a specular direction, has the lowest reflection loss at a certain frequency and incident angle. It implies that the reflection characteristics of indoor building materials are determined not only by surface roughness, but also by many other factors, such as relative permittivity, frequency, and incident angle. Our work suggests that the reflection measurements of indoor D-band wireless links have a prospective application for future indoor wireless communication systems.
Open AccessReflection Characteristics Measurements of Indoor Wireless Link in D-Band
For the millimeter wave (mm-Wave) and terahertz (THz) indoor wireless communication system, the reflection channels need to be characterized and modeled. In this paper, the reflection measurements of the parallel polarized wave are carried out under multiple incident angles and five kinds of materials in the D-band (110–170 GHz). A modified reflection model with two parameters estimated by the minimum mean square error (MMSE) criterion is proposed. The results show that the measurements are in good agreement with the proposed model. Furthermore, a set of measured properties is demonstrated and it can be concluded that both the reflection coefficients and relative permittivity gradually decrease, whereas the surface roughness increases slightly with the increasing frequency, indicating a weak frequency dependence. Interestingly, the concrete board with high surface roughness, which means more power loss in a specular direction, has the lowest reflection loss at a certain frequency and incident angle. It implies that the reflection characteristics of indoor building materials are determined not only by surface roughness, but also by many other factors, such as relative permittivity, frequency, and incident angle. Our work suggests that the reflection measurements of indoor D-band wireless links have a prospective application for future indoor wireless communication systems.
- 5 August 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (16) , 4072-4075
OFDM-PS-256QAM signal delivery at 47.45 Gb/s over 4.6-kilometers wireless distance at the W band
Photonics technology is a promising way to generate high-frequency millimeter waves, which is also a key technology to realize the convergence of fiber-optic and wireless communication. To meet the actual application requirements, kilometer-level wireless distance, large-capacity, and high-spectral-efficiency systems are urgent requirements. Based on the photonics-aided system at the W band, we achieve a net rate of 47.45-Gb/s signal delivery over a 10-km single-mode fiber-28 (SMF-28) and 4.6-km wireless free-space link. The spectral efficiency of the system is 4.97 bit/s/Hz. To the best of our knowledge, this is the first demonstration at more than a 4-km wireless distance level at the W band based on a photonics-aided system, and we achieve a record product of the single-channel transmission rate and wireless distance, i.e., 47.45 Gb/s × 4.6 km = 218.27 Gb/s km. The experimental results provide a good reference value for improving the transmission distance and data rate of the radio-over-fiber (ROF) system, and will play an important role in the future beyond the 5G era.
- 5 August 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (16) , 4072-4075
OFDM-PS-256QAM signal delivery at 47.45 Gb/s over 4.6-kilometers wireless distance at the W band
Photonics technology is a promising way to generate high-frequency millimeter waves, which is also a key technology to realize the convergence of fiber-optic and wireless communication. To meet the actual application requirements, kilometer-level wireless distance, large-capacity, and high-spectral-efficiency systems are urgent requirements. Based on the photonics-aided system at the W band, we achieve a net rate of 47.45-Gb/s signal delivery over a 10-km single-mode fiber-28 (SMF-28) and 4.6-km wireless free-space link. The spectral efficiency of the system is 4.97 bit/s/Hz. To the best of our knowledge, this is the first demonstration at more than a 4-km wireless distance level at the W band based on a photonics-aided system, and we achieve a record product of the single-channel transmission rate and wireless distance, i.e., 47.45 Gb/s × 4.6 km = 218.27 Gb/s km. The experimental results provide a good reference value for improving the transmission distance and data rate of the radio-over-fiber (ROF) system, and will play an important role in the future beyond the 5G era.
- 1 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (07338724) , 1-8
Delivery of Polarization-Division-Multiplexing Wireless Millimeter-Wave Signal over 4.6-km at W-Band
We proposed and established a large-capacity, long-distance wireless millimeter-wave (mm-wave) signal delivery system at W-band based on photonics-aided mm-wave generation technology, polarization-division-multiplexing (PDM), and advanced devices. We demonstrated the wireless transmission of 10-Gbaud PDM-QPSK, PDM-16QAM, and PDM-PS-64QAM mm-wave signals in the W-band up to 4.6-km, respectively. The multiple-input multiple-output (MIMO) Volterra equalizer (VE) is employed during the Rx offline digital signal processing (DSP) to compensate for impairments and further improve the system transmission performance. Our demonstrated system can generate and deliver 10-Gbaud (110 Gb/s) PDM-PS-64QAM (5.5 bits/symbol/polarization) mm-wave signal at 88.5-GHz over 4.6-km wireless distance with a bit-error-rate (BER) below the soft-decision forward error correction (SD-FEC) threshold of 2.4 × 10 −2 . Considering the SD-FEC threshold of 2.4×10 −2 with 20% overhead, the maximum net rate of 91.6 Gb/s in this system can be achieved. To the best of the authors’ knowledge, it's the first time to demonstrate single-carrier PDM-PS-64QAM (91.6 Gb/s) wireless mm-wave signal delivery over 4.6 km at W-band.
- 1 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (07338724) , 1-8
Delivery of Polarization-Division-Multiplexing Wireless Millimeter-Wave Signal over 4.6-km at W-Band
We proposed and established a large-capacity, long-distance wireless millimeter-wave (mm-wave) signal delivery system at W-band based on photonics-aided mm-wave generation technology, polarization-division-multiplexing (PDM), and advanced devices. We demonstrated the wireless transmission of 10-Gbaud PDM-QPSK, PDM-16QAM, and PDM-PS-64QAM mm-wave signals in the W-band up to 4.6-km, respectively. The multiple-input multiple-output (MIMO) Volterra equalizer (VE) is employed during the Rx offline digital signal processing (DSP) to compensate for impairments and further improve the system transmission performance. Our demonstrated system can generate and deliver 10-Gbaud (110 Gb/s) PDM-PS-64QAM (5.5 bits/symbol/polarization) mm-wave signal at 88.5-GHz over 4.6-km wireless distance with a bit-error-rate (BER) below the soft-decision forward error correction (SD-FEC) threshold of 2.4 × 10 −2 . Considering the SD-FEC threshold of 2.4×10 −2 with 20% overhead, the maximum net rate of 91.6 Gb/s in this system can be achieved. To the best of the authors’ knowledge, it's the first time to demonstrate single-carrier PDM-PS-64QAM (91.6 Gb/s) wireless mm-wave signal delivery over 4.6 km at W-band.