Daiki Okazaki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daiki Okazaki has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Satoshi Ashihara
The University of Tokyo
11 shared publications - Ikki Morichika
Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan
6 shared publications Shigeki Tokita
Kyoto University
3 shared publications- Shigeo Maruyama
State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical Engineering Zhejiang University Hangzhou China
3 shared publications Anton Anisimov
Canatu, Ltd., Konalankuja 5, FI-00390 Helsinki, Finland
2 shared publications- Esko I. Kauppinen
Department of Applied Physics School of Science Aalto University Espoo Finland
2 shared publications
Latest Publications
- 10 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 28928
1-THz-to-mid-infrared field-resolved spectrometer driven by a Cr:ZnS oscillator
The mid-infrared (MIR) and terahertz (THz) spectral regions provide complementary insights into molecular structure and dynamics, with the MIR probing intramolecular vibrations and the THz region probing intermolecular interactions, lattice vibrations, and collective motions. Comprehensive molecular spectroscopy therefore requires broadband, gap-free access spanning both regimes. Here, we present a compact platform for broadband THz generation and detection driven by 2.3- μ m-centered, near-single-cycle (13-fs) pulses from a mode-locked Cr:ZnS oscillator. Leveraging the wide transparency windows and large nonlinear coefficients of organic crystals, we achieve efficient THz generation up to 39 THz with pump energies of only a few nanojoules, and observe no degradation over months of operation. Using a pump pulse energy of 3.0 nJ, a THz output of 1.1 pJ was achieved. Highly reproducible THz waveform generation and detection with a time-domain peak-to-peak electric-field signal-to-noise ratio exceeding 2000 (35 min acquisition with 8.6 kHz modulation) was demonstrated over 10 hours. As an application, we demonstrate broadband absorption spectroscopy of polymer films, resolving characteristic resonances across the 1–30 THz range. These results establish a robust and efficient approach for field-resolved molecular spectroscopy across the THz-to-MIR domain, based on newly emerged few-cycle mode-locked Cr:ZnS oscillator technology, paving the way toward ultra-broadband coverage from 1–100 THz with table-top systems.
- 10 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 28928
1-THz-to-mid-infrared field-resolved spectrometer driven by a Cr:ZnS oscillator
The mid-infrared (MIR) and terahertz (THz) spectral regions provide complementary insights into molecular structure and dynamics, with the MIR probing intramolecular vibrations and the THz region probing intermolecular interactions, lattice vibrations, and collective motions. Comprehensive molecular spectroscopy therefore requires broadband, gap-free access spanning both regimes. Here, we present a compact platform for broadband THz generation and detection driven by 2.3- μ m-centered, near-single-cycle (13-fs) pulses from a mode-locked Cr:ZnS oscillator. Leveraging the wide transparency windows and large nonlinear coefficients of organic crystals, we achieve efficient THz generation up to 39 THz with pump energies of only a few nanojoules, and observe no degradation over months of operation. Using a pump pulse energy of 3.0 nJ, a THz output of 1.1 pJ was achieved. Highly reproducible THz waveform generation and detection with a time-domain peak-to-peak electric-field signal-to-noise ratio exceeding 2000 (35 min acquisition with 8.6 kHz modulation) was demonstrated over 10 hours. As an application, we demonstrate broadband absorption spectroscopy of polymer films, resolving characteristic resonances across the 1–30 THz range. These results establish a robust and efficient approach for field-resolved molecular spectroscopy across the THz-to-MIR domain, based on newly emerged few-cycle mode-locked Cr:ZnS oscillator technology, paving the way toward ultra-broadband coverage from 1–100 THz with table-top systems.
- 1 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (12) , 21243
Two-stage, triple-pass 5-mJ-level Fe:ZnSe chirped-pulse amplifier with a KTA-based OPA frontend and flashlamp-pumped erbium lasers
The development of Fe:ZnSe-based mid-infrared laser amplification as an alternative to optical parametric chirped-pulse amplification has become increasingly important in high-intensity laser science, especially for high-harmonic generation toward higher photon energies. Here, we demonstrate a Fe:ZnSe chirped-pulse amplification architecture that combines a KTiOAsO 4 -based optical parametric amplifier (OPA) frontend providing 29- μ J, 4- μ m seed pulses, flashlamp-pumped erbium lasers as high-pulse-energy 3- μ m-class pump sources, and cladding-assisted suppression of transverse parasitic oscillation in the Fe:ZnSe crystals. The system delivers 4.1- μ m pulses at 5 Hz with an amplified energy of 6.7 mJ, a compressed energy of 4.7 mJ, and a pulse duration of 240 fs, while maintaining good beam quality and preserving an energy contrast of approximately 5000 in the amplified output. These results show that high-contrast, millijoule-level femtosecond Fe:ZnSe amplification can be achieved even with free-running flashlamp-pumped erbium lasers by reducing the required gain and number of passes through high-energy seeding. The demonstrated architecture provides a practical route toward further energy scaling of Fe:ZnSe-based 4- μ m femtosecond lasers, ultimately aiming at terawatt-class peak powers with larger-aperture homogeneous crystals.
- 1 June 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (12) , 21243
Two-stage, triple-pass 5-mJ-level Fe:ZnSe chirped-pulse amplifier with a KTA-based OPA frontend and flashlamp-pumped erbium lasers
The development of Fe:ZnSe-based mid-infrared laser amplification as an alternative to optical parametric chirped-pulse amplification has become increasingly important in high-intensity laser science, especially for high-harmonic generation toward higher photon energies. Here, we demonstrate a Fe:ZnSe chirped-pulse amplification architecture that combines a KTiOAsO 4 -based optical parametric amplifier (OPA) frontend providing 29- μ J, 4- μ m seed pulses, flashlamp-pumped erbium lasers as high-pulse-energy 3- μ m-class pump sources, and cladding-assisted suppression of transverse parasitic oscillation in the Fe:ZnSe crystals. The system delivers 4.1- μ m pulses at 5 Hz with an amplified energy of 6.7 mJ, a compressed energy of 4.7 mJ, and a pulse duration of 240 fs, while maintaining good beam quality and preserving an energy contrast of approximately 5000 in the amplified output. These results show that high-contrast, millijoule-level femtosecond Fe:ZnSe amplification can be achieved even with free-running flashlamp-pumped erbium lasers by reducing the required gain and number of passes through high-energy seeding. The demonstrated architecture provides a practical route toward further energy scaling of Fe:ZnSe-based 4- μ m femtosecond lasers, ultimately aiming at terawatt-class peak powers with larger-aperture homogeneous crystals.
- 28 May 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (11) , 3225-3228
Carbon-nanotube-assisted self-starting dispersion-managed Kerr-lens mode-locked Cr:ZnS laser delivering 0.7-MW peak power
Self-starting operation is highly desirable for practical Kerr-lens mode-locked oscillators, but it is difficult to combine with high-energy few-cycle performance. Here, we demonstrate a self-starting dispersion-managed Kerr-lens mode-locked Cr:ZnS oscillator at 2.3 µm and 25.6 MHz using a single-walled carbon nanotube (SWCNT) saturable absorber. The SWCNT enables reliable self-starting while preserving Kerr-lens-driven spectral broadening, yielding 30-fs pulses. Dispersion-managed operation reduces nonlinear phase accumulation in the gain crystal and increases the maximum pulse energy to above 20 nJ. After external dispersion compensation, the oscillator delivers peak powers of ∼0.7 MW. The output further drives octave-spanning spectral broadening in rutile, establishing a practical self-starting Cr:ZnS platform toward mid-infrared laser science.
- 28 May 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (11) , 3225-3228
Carbon-nanotube-assisted self-starting dispersion-managed Kerr-lens mode-locked Cr:ZnS laser delivering 0.7-MW peak power
Self-starting operation is highly desirable for practical Kerr-lens mode-locked oscillators, but it is difficult to combine with high-energy few-cycle performance. Here, we demonstrate a self-starting dispersion-managed Kerr-lens mode-locked Cr:ZnS oscillator at 2.3 µm and 25.6 MHz using a single-walled carbon nanotube (SWCNT) saturable absorber. The SWCNT enables reliable self-starting while preserving Kerr-lens-driven spectral broadening, yielding 30-fs pulses. Dispersion-managed operation reduces nonlinear phase accumulation in the gain crystal and increases the maximum pulse energy to above 20 nJ. After external dispersion compensation, the oscillator delivers peak powers of ∼0.7 MW. The output further drives octave-spanning spectral broadening in rutile, establishing a practical self-starting Cr:ZnS platform toward mid-infrared laser science.
- Open Access
- 3 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (5)
Tunable mode-locked laser in the 2.0–2.6 μ m range with GHz-level spectral width and sub-nanosecond pulse duration
Mode-locked lasers with narrow spectral bandwidths and high power spectral density are valuable for various applications that require selective and efficient light–matter interactions. However, mode-locked lasers in the mid-infrared (MIR) region so far face significant challenges in both narrowing the spectral width and expanding the tunable range. In this work, we demonstrate a Fourier transform-limited pulsed laser with ultra-narrow bandwidth by utilizing the frequency-modulated (FM) mode-locking technique in a Cr:ZnS laser. The proposed laser achieves a spectral width of ∼2 GHz (∼40 pm) and a pulse duration of ∼200 ps within a wide tunable range from 1966 to 2572 nm. By incorporating an etalon into the cavity, the spectral width is further narrowed to ∼500 MHz (∼8 pm), and the pulse duration is extended to ∼1 ns. We also find unique detuning characteristics of the FM mode-locked laser in that the narrowband mode-locked state is maintained over a large detuning frequency of ∼20 kHz, while its operating wavelength varies linearly with detuning. This property indicates a significantly better resistance to cavity length fluctuations compared to other active mode-locking schemes as well as a promising way to achieve precise wavelength fine-tuning through electronic control. The demonstrated laser, featuring an ultra-narrow spectral width at a desired mid-infrared wavelength, offers a powerful tool for high-resolution and high-sensitivity spectroscopy and coherent control of molecular vibrations.
- 3 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (5)
Open AccessTunable mode-locked laser in the 2.0–2.6 μ m range with GHz-level spectral width and sub-nanosecond pulse duration
Mode-locked lasers with narrow spectral bandwidths and high power spectral density are valuable for various applications that require selective and efficient light–matter interactions. However, mode-locked lasers in the mid-infrared (MIR) region so far face significant challenges in both narrowing the spectral width and expanding the tunable range. In this work, we demonstrate a Fourier transform-limited pulsed laser with ultra-narrow bandwidth by utilizing the frequency-modulated (FM) mode-locking technique in a Cr:ZnS laser. The proposed laser achieves a spectral width of ∼2 GHz (∼40 pm) and a pulse duration of ∼200 ps within a wide tunable range from 1966 to 2572 nm. By incorporating an etalon into the cavity, the spectral width is further narrowed to ∼500 MHz (∼8 pm), and the pulse duration is extended to ∼1 ns. We also find unique detuning characteristics of the FM mode-locked laser in that the narrowband mode-locked state is maintained over a large detuning frequency of ∼20 kHz, while its operating wavelength varies linearly with detuning. This property indicates a significantly better resistance to cavity length fluctuations compared to other active mode-locking schemes as well as a promising way to achieve precise wavelength fine-tuning through electronic control. The demonstrated laser, featuring an ultra-narrow spectral width at a desired mid-infrared wavelength, offers a powerful tool for high-resolution and high-sensitivity spectroscopy and coherent control of molecular vibrations.
- 9 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (6) , 1702-1707
All-Solid-State Optical-Field-Sensitive Detector for Sub-Nanojoule Pulses Using Metal–Insulator Hybrid Nanostructure
- 9 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (6) , 1702-1707
All-Solid-State Optical-Field-Sensitive Detector for Sub-Nanojoule Pulses Using Metal–Insulator Hybrid Nanostructure
- 15 November 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (23) , 6077-6080
Mode-locked laser oscillation with spectral peaks at molecular rovibrational transition lines
We demonstrate spectral peak formation in a mode-locked solid-state laser that contains a gas cell inside the cavity. Symmetric spectral peaks appear in the course of sequential spectral shaping through resonant interaction with molecular rovibrational transitions and nonlinear phase modulation in the gain medium. The spectral peak formation is explained as that narrowband molecular emissions triggered by an impulsive rovibrational excitation are superposed on the broadband spectrum of the soliton pulse by constructive interference. The demonstrated laser, which exhibits comb-like spectral peaks at molecular resonances, potentially provides novel tools for ultrasensitive molecular detection, vibration-mediated chemical reaction control, and infrared frequency standards.
- 15 November 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (23) , 6077-6080
Mode-locked laser oscillation with spectral peaks at molecular rovibrational transition lines
We demonstrate spectral peak formation in a mode-locked solid-state laser that contains a gas cell inside the cavity. Symmetric spectral peaks appear in the course of sequential spectral shaping through resonant interaction with molecular rovibrational transitions and nonlinear phase modulation in the gain medium. The spectral peak formation is explained as that narrowband molecular emissions triggered by an impulsive rovibrational excitation are superposed on the broadband spectrum of the soliton pulse by constructive interference. The demonstrated laser, which exhibits comb-like spectral peaks at molecular resonances, potentially provides novel tools for ultrasensitive molecular detection, vibration-mediated chemical reaction control, and infrared frequency standards.
- 4 October 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (21) , 38674-38683
Broadband background-free vibrational spectroscopy using a mode-locked Cr:ZnS laser
We demonstrate high-sensitivity vibrational absorption spectroscopy in the 2-micron wavelength range by using a mode-locked Cr:ZnS laser. Interferometric subtraction and multichannel detection across the broad laser spectrum realize simultaneous background-free detection of multiple vibrational modes over a spectral span of >380 cm−1. Importantly, we achieve detection of small absorbance on the order of 10−4, which is well below the detection limit of conventional absorption spectroscopy set by the detector dynamic range. The results indicate the promising potential of the background-free method for ultrasensitive and rapid detection of trace gases and chemicals.
- 4 October 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (21) , 38674-38683
Broadband background-free vibrational spectroscopy using a mode-locked Cr:ZnS laser
We demonstrate high-sensitivity vibrational absorption spectroscopy in the 2-micron wavelength range by using a mode-locked Cr:ZnS laser. Interferometric subtraction and multichannel detection across the broad laser spectrum realize simultaneous background-free detection of multiple vibrational modes over a spectral span of >380 cm−1. Importantly, we achieve detection of small absorbance on the order of 10−4, which is well below the detection limit of conventional absorption spectroscopy set by the detector dynamic range. The results indicate the promising potential of the background-free method for ultrasensitive and rapid detection of trace gases and chemicals.
- 28 February 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (6) , 8517-8525
Inherent intensity noise suppression in a mode-locked polycrystalline Cr:ZnS oscillator
We developed a diode-pumped, mode-locked polycrystalline Cr:ZnS oscillator using single-walled carbon nanotubes as a saturable absorber. The oscillator exhibits self-start mode-locking operation, generating sub-100 fs pulses with an average power of 300 mW. We found a unique feature in which the intensity noise originating from relaxation oscillation is suppressed by inherent second harmonic generation in polycrystalline Cr:ZnS. The observed noise suppression is reproduced by a theoretical model that includes an instantaneous nonlinear loss.
- 28 February 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (6) , 8517-8525
Inherent intensity noise suppression in a mode-locked polycrystalline Cr:ZnS oscillator
We developed a diode-pumped, mode-locked polycrystalline Cr:ZnS oscillator using single-walled carbon nanotubes as a saturable absorber. The oscillator exhibits self-start mode-locking operation, generating sub-100 fs pulses with an average power of 300 mW. We found a unique feature in which the intensity noise originating from relaxation oscillation is suppressed by inherent second harmonic generation in polycrystalline Cr:ZnS. The observed noise suppression is reproduced by a theoretical model that includes an instantaneous nonlinear loss.
- 1 February 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (4) , 1076-1081
Direct electric-field reconstruction of few-cycle mid-infrared pulses in the nanojoule energy range
Amid the increasing potential of ultrafast mid-infrared (mid-IR) laser sources based on transition metal doped chalcogenides such as Cr:ZnS, Cr:ZnSe, and Fe:ZnSe lasers, there is a need for direct and sensitive characterization of mid-IR mode-locked laser pulses that work in the nanojoule energy range. We developed a two-dimensional spectral shearing interferometry (2DSI) setup to successfully demonstrate the direct electric-field reconstruction of Cr:ZnS mode-locked laser pulses with a central wavelength of 2.3 µm, temporal duration of 30.3 fs, and energies of 3 nJ. The reconstructed electric field is in reasonable agreement with an independently measured intensity autocorrelation trace, and the quantitative reliability of the 2DSI measurement is verified from a material dispersion evaluation. The presented implementation of 2DSI, including a choice of nonlinear crystal as well as the use of high-throughput dispersive elements and a high signal-to-noise ratio near-IR spectrometer, would benefit future development of ultrafast mid-IR lasers and their applications.
- 1 February 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (4) , 1076-1081
Direct electric-field reconstruction of few-cycle mid-infrared pulses in the nanojoule energy range
Amid the increasing potential of ultrafast mid-infrared (mid-IR) laser sources based on transition metal doped chalcogenides such as Cr:ZnS, Cr:ZnSe, and Fe:ZnSe lasers, there is a need for direct and sensitive characterization of mid-IR mode-locked laser pulses that work in the nanojoule energy range. We developed a two-dimensional spectral shearing interferometry (2DSI) setup to successfully demonstrate the direct electric-field reconstruction of Cr:ZnS mode-locked laser pulses with a central wavelength of 2.3 µm, temporal duration of 30.3 fs, and energies of 3 nJ. The reconstructed electric field is in reasonable agreement with an independently measured intensity autocorrelation trace, and the quantitative reliability of the 2DSI measurement is verified from a material dispersion evaluation. The presented implementation of 2DSI, including a choice of nonlinear crystal as well as the use of high-throughput dispersive elements and a high signal-to-noise ratio near-IR spectrometer, would benefit future development of ultrafast mid-IR lasers and their applications.
- 1 January 2022
- Published by Optica Publishing Group
- Vol. 91, Th1A.3
All-Solid-State Optical Field Detector using Metal-Insulator Hybrid Nanostructures
We developed an optical field detector based on plasmon-enhanced field-induced tunneling at a metal-insulator interface. By completely encapsulating metal nanoantennas with dielectric materials, both high photoelectric conversion efficiency and high damage tolerance are achieved.
- 1 January 2022
- Published by Optica Publishing Group
- Vol. 91, Th1A.3
All-Solid-State Optical Field Detector using Metal-Insulator Hybrid Nanostructures
We developed an optical field detector based on plasmon-enhanced field-induced tunneling at a metal-insulator interface. By completely encapsulating metal nanoantennas with dielectric materials, both high photoelectric conversion efficiency and high damage tolerance are achieved.