Hua Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hua Yu has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
Rui Liu
School of New Energy and Materials Southwest Petroleum University Chengdu 610500 China
16 shared publicationsYue Yu
The Center of Functional Materials for Working Fluids of Oil and Gas Field, School of New Energy and Materials, Southwest Petroleum University, Chengdu 610500, China
15 shared publicationsMaoxia Xu
9 shared publicationsQiaofeng Wu
School of New Energy and Materials Southwest Petroleum University Chengdu 610500 China
9 shared publicationsChang Liu
Institute of Photovoltaics Southwest Petroleum University Chengdu 610500 China
8 shared publicationsHaorong Ren
8 shared publications
Latest Publications
- Open Access
- 29 May 2026
- Published by IOP Publishing in Materials Futures
- Vol. 5 (4) , 042101
Steady-State and Time-Resolved Spectroscopic Techniques for Investigating Defect States in Perovskite Photovoltaics
Perovskite solar cells (PSCs) have gained substantial attention due to rapidly increasing efficiencies and potential advantages like tunable bandgaps and low processing costs. However, the presence of defect states, originating from factors such as ionic vacancies, imperfect interfaces, and grain boundaries, currently limits their performance potential and operational stability. Mitigating these defects is therefore critical for advancing PSC technology towards commercial viability. Both conventional and advanced implementations of photoluminescence and absorption spectroscopies-ranging from steady-state measurements to time-resolved techniques-have become indispensable tools for probing these defect states with high sensitivity, providing crucial insights into their nature, energetic distribution, and dynamics. Understanding defects through spectroscopy is key to developing effective passivation strategies. This perspective reviews the most widely adopted steady-state and time-resolved spectroscopic methods for investigating defect density and their impacts on carrier recombination in perovskite materials and devices. We emphasize recent advancements in techniques relevant to understanding and improving defect passivation, aiming to provide guidance for continued progress in the field of perovskite photovoltaics.
- 29 May 2026
- Published by IOP Publishing in Materials Futures
- Vol. 5 (4) , 042101
Open AccessSteady-State and Time-Resolved Spectroscopic Techniques for Investigating Defect States in Perovskite Photovoltaics
Perovskite solar cells (PSCs) have gained substantial attention due to rapidly increasing efficiencies and potential advantages like tunable bandgaps and low processing costs. However, the presence of defect states, originating from factors such as ionic vacancies, imperfect interfaces, and grain boundaries, currently limits their performance potential and operational stability. Mitigating these defects is therefore critical for advancing PSC technology towards commercial viability. Both conventional and advanced implementations of photoluminescence and absorption spectroscopies-ranging from steady-state measurements to time-resolved techniques-have become indispensable tools for probing these defect states with high sensitivity, providing crucial insights into their nature, energetic distribution, and dynamics. Understanding defects through spectroscopy is key to developing effective passivation strategies. This perspective reviews the most widely adopted steady-state and time-resolved spectroscopic methods for investigating defect density and their impacts on carrier recombination in perovskite materials and devices. We emphasize recent advancements in techniques relevant to understanding and improving defect passivation, aiming to provide guidance for continued progress in the field of perovskite photovoltaics.
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (3) , 1529-1537
Synergistic Engineering of Ni-Decorated Composite Current Collector and Hollow CoS Nanocages for Ultrahigh Areal Capacity Lithium-Ion Battery Anodes
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (3) , 1529-1537
Synergistic Engineering of Ni-Decorated Composite Current Collector and Hollow CoS Nanocages for Ultrahigh Areal Capacity Lithium-Ion Battery Anodes
- 3 November 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (23)
Electron‐Deficient Defects Repair and Residual PbI 2 Management toward Air‐Processed High‐Performance Perovskite Solar Cells
Addressing abundant undercoordinated Sn 4+ /Pb 2+ defects and residual PbI 2 in perovskite solar cells (PSCs) is the crux to implement high‐performance regular (n‐i‐p) PSCs in ambient air and driving commercialization. Herein, a chemical bridging agent between SnO 2 and perovskite, namely 1‐ethyl‐3‐methylimidazole mesysulfonate (EMIMS), is introduced. The oxygen‐rich functional group in EMIMS not only reduces the surface hydroxide (─OH) defects on the SnO 2 layer, but also chelates the undercoordinated Pb 2+ on the perovskite film. The reduction of these electron‐deficient defects minimizes the loss of nonradiative combination of carriers and accelerates electron extraction/transfer at the buried interface. Notably, the all‐air prepared n‐i‐p PSCs modified by EMIMS achieve a high efficiency of 25.20%, and the unencapsulated device retains initial efficiency of above 90% after 2000 h in high temperature or humid environment. This study supplies a valid strategy for the application of oxygen‐rich functional groups in the preparation of high‐quality PSCs in ambient air.
- 3 November 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (23)
Electron‐Deficient Defects Repair and Residual PbI 2 Management toward Air‐Processed High‐Performance Perovskite Solar Cells
Addressing abundant undercoordinated Sn 4+ /Pb 2+ defects and residual PbI 2 in perovskite solar cells (PSCs) is the crux to implement high‐performance regular (n‐i‐p) PSCs in ambient air and driving commercialization. Herein, a chemical bridging agent between SnO 2 and perovskite, namely 1‐ethyl‐3‐methylimidazole mesysulfonate (EMIMS), is introduced. The oxygen‐rich functional group in EMIMS not only reduces the surface hydroxide (─OH) defects on the SnO 2 layer, but also chelates the undercoordinated Pb 2+ on the perovskite film. The reduction of these electron‐deficient defects minimizes the loss of nonradiative combination of carriers and accelerates electron extraction/transfer at the buried interface. Notably, the all‐air prepared n‐i‐p PSCs modified by EMIMS achieve a high efficiency of 25.20%, and the unencapsulated device retains initial efficiency of above 90% after 2000 h in high temperature or humid environment. This study supplies a valid strategy for the application of oxygen‐rich functional groups in the preparation of high‐quality PSCs in ambient air.
- 21 August 2025
- Published by Wiley in Small Methods
- Vol. 9 (9) , e01052
Bifacial Defect Management of Buried Interface for Enhanced Photovoltaic Performance of Inverted‐Perovskite Devices with Precise Regulation of Charge Transport
The intrinsic aggregation behavior of self‐assembled molecules (SAMs) leads to severe heterogeneity or even blankness in the perovskite substrate layer. The direct contact between the bottom surface of perovskite and nickel oxide undergoes a redox reaction, which inevitably leads to perovskite degradation and strengthens the charge transport barrier. Herein, a 1‐propenyl‐2,3‐dimethylimidazole hexafluorophosphate (PDMIMPF 6 ) molecule with bidirectional defect regulation has been developed. PDMIMPF 6 binds SAMs and perovskite bilayers to modulate defects of the two as well as to blur the interfacial space. The work function of the SAM layer increases due to repair of the aggregation defect in organic functional molecules, contributing to rapid charge transport and reducing the degradation rate of the perovskite. In addition, the PDMIMPF 6 with multifunctional groups has been shown to inhibit FA + migration and passivate the uncoordinated lead defects through hydrogen bonding and coordination interactions. This molecular adhesive strategy achieves a power conversion efficiency of 25.61% for the PDMIMPF 6 ‐treated device. Noticeably, the unencapsulated‐device maintaines an initial efficiency of 83.0% at 1200 h under maximum power point tracking, and outstanding humidity stability (91.4%) over 2000 h.
- 21 August 2025
- Published by Wiley in Small Methods
- Vol. 9 (9) , e01052
Bifacial Defect Management of Buried Interface for Enhanced Photovoltaic Performance of Inverted‐Perovskite Devices with Precise Regulation of Charge Transport
The intrinsic aggregation behavior of self‐assembled molecules (SAMs) leads to severe heterogeneity or even blankness in the perovskite substrate layer. The direct contact between the bottom surface of perovskite and nickel oxide undergoes a redox reaction, which inevitably leads to perovskite degradation and strengthens the charge transport barrier. Herein, a 1‐propenyl‐2,3‐dimethylimidazole hexafluorophosphate (PDMIMPF 6 ) molecule with bidirectional defect regulation has been developed. PDMIMPF 6 binds SAMs and perovskite bilayers to modulate defects of the two as well as to blur the interfacial space. The work function of the SAM layer increases due to repair of the aggregation defect in organic functional molecules, contributing to rapid charge transport and reducing the degradation rate of the perovskite. In addition, the PDMIMPF 6 with multifunctional groups has been shown to inhibit FA + migration and passivate the uncoordinated lead defects through hydrogen bonding and coordination interactions. This molecular adhesive strategy achieves a power conversion efficiency of 25.61% for the PDMIMPF 6 ‐treated device. Noticeably, the unencapsulated‐device maintaines an initial efficiency of 83.0% at 1200 h under maximum power point tracking, and outstanding humidity stability (91.4%) over 2000 h.
- 28 April 2025
- Published by Wiley in Chempluschem
- Vol. 90 (7) , e202500169
Cooperation of Dual Organic Spacers and A Site Cations for High‐Performance Quasi‐2D Ruddlesden–Popper Perovskite Solar Cells
Ruddlesden–Popper (RP) quasi‐two‐dimensional (2D) perovskites exhibit enhanced stability compared to their three‐dimensional (3D) counterparts due to the incorporation of bulky organic spacers. However, their efficiency is relatively low owing to the large exciton binding energy and quantum confinement effects associated with these organic spacers. Herein, a diversified cation regulation strategy is developed by adjusting both the spacers and A‐site cations, achieving the fabrication of mixed 4‐fluoro‐phenethylammonium (F‐PEA+)/n‐butylammonium (BA+) and formamidinium (FA+)/methylammonium (MA+) n = 4 quasi‐2D RP perovskite solar cells. Primarily, the introduction of F‐PEA+ induces an ordered distribution of the film from low‐n to high‐n phases, resulting in enhanced crystallinity, larger grain size, fewer cracks, and voids as well as high‐quality perovskite films with preferred orientation. Furthermore, the incorporation of FA+ reduces the bandgap of the perovskite, facilitating exciton dissociation and enhancing carrier transport capabilities. Ultimately, under the cooperation effect, the obvious elevation in the efficiency of NiOx‐based (BA0.9F‐PEA0.1)2(MA0.8FA0.2)3Pb4I13 n = 4 quasi‐2D RP perovskite solar cells from 12.51 to 15.68% is achieved. Additionally, the unencapsulated devices retain 80.4% of initial efficiency after 1100 h of heating at 60 °C in ambient air with 40% relative humidity, demonstrating excellent thermal and moisture stability.
- 28 April 2025
- Published by Wiley in Chempluschem
- Vol. 90 (7) , e202500169
Cooperation of Dual Organic Spacers and A Site Cations for High‐Performance Quasi‐2D Ruddlesden–Popper Perovskite Solar Cells
Ruddlesden–Popper (RP) quasi‐two‐dimensional (2D) perovskites exhibit enhanced stability compared to their three‐dimensional (3D) counterparts due to the incorporation of bulky organic spacers. However, their efficiency is relatively low owing to the large exciton binding energy and quantum confinement effects associated with these organic spacers. Herein, a diversified cation regulation strategy is developed by adjusting both the spacers and A‐site cations, achieving the fabrication of mixed 4‐fluoro‐phenethylammonium (F‐PEA+)/n‐butylammonium (BA+) and formamidinium (FA+)/methylammonium (MA+) n = 4 quasi‐2D RP perovskite solar cells. Primarily, the introduction of F‐PEA+ induces an ordered distribution of the film from low‐n to high‐n phases, resulting in enhanced crystallinity, larger grain size, fewer cracks, and voids as well as high‐quality perovskite films with preferred orientation. Furthermore, the incorporation of FA+ reduces the bandgap of the perovskite, facilitating exciton dissociation and enhancing carrier transport capabilities. Ultimately, under the cooperation effect, the obvious elevation in the efficiency of NiOx‐based (BA0.9F‐PEA0.1)2(MA0.8FA0.2)3Pb4I13 n = 4 quasi‐2D RP perovskite solar cells from 12.51 to 15.68% is achieved. Additionally, the unencapsulated devices retain 80.4% of initial efficiency after 1100 h of heating at 60 °C in ambient air with 40% relative humidity, demonstrating excellent thermal and moisture stability.
Optimized Crystallization via Ionic Liquid Engineering for Air‐Fabricated Perovskite Solar Cells with Efficiency of 25.11%
The premature reaction of PbI2 with organic cations in perovskite (PVK) precursor solutions often leads to compromised film quality. To mitigate this, the ionic liquid (IL) pyridinium trifluoromethanesulfonate is introduced into the precursor solution. The strong interaction between pyridinium trifluoromethanesulfonate and PbI2 promotes the formation of nucleation clusters, effectively lowering the nucleation barrier and regulating the crystallization of perovskite, resulting in high‐quality, homogeneous PVK films. In situ characterization shows that the prenucleation strategy yields PVK films with an average grain size exceeding 1 μm. The hydrophobicity of the trifluoromethyl group modulates humidity, facilitating perovskite crystallization in moist environments. This is in contrast to the typical negative effects of moisture, which can induce defects in perovskite structures. As a result, IL‐modified perovskite solar cells (PSCs) achieved a remarkable power conversion efficiency (PCE) of 25.11% under ambient conditions. These PSCs retained 80.43% of their initial PCE after 820 h of continuous maximum power point (MPP) tracking. Furthermore, after 1000 h of exposure to air with 30%–50% relative humidity (RH) at room temperature, the devices maintained 87% of their initial efficiency, demonstrating excellent air stability for long‐term PSC applications.
Optimized Crystallization via Ionic Liquid Engineering for Air‐Fabricated Perovskite Solar Cells with Efficiency of 25.11%
The premature reaction of PbI2 with organic cations in perovskite (PVK) precursor solutions often leads to compromised film quality. To mitigate this, the ionic liquid (IL) pyridinium trifluoromethanesulfonate is introduced into the precursor solution. The strong interaction between pyridinium trifluoromethanesulfonate and PbI2 promotes the formation of nucleation clusters, effectively lowering the nucleation barrier and regulating the crystallization of perovskite, resulting in high‐quality, homogeneous PVK films. In situ characterization shows that the prenucleation strategy yields PVK films with an average grain size exceeding 1 μm. The hydrophobicity of the trifluoromethyl group modulates humidity, facilitating perovskite crystallization in moist environments. This is in contrast to the typical negative effects of moisture, which can induce defects in perovskite structures. As a result, IL‐modified perovskite solar cells (PSCs) achieved a remarkable power conversion efficiency (PCE) of 25.11% under ambient conditions. These PSCs retained 80.43% of their initial PCE after 820 h of continuous maximum power point (MPP) tracking. Furthermore, after 1000 h of exposure to air with 30%–50% relative humidity (RH) at room temperature, the devices maintained 87% of their initial efficiency, demonstrating excellent air stability for long‐term PSC applications.
Carboxymethyl‐Based Ionic Liquid Engineering for Efficient and Stable Inverted Perovskite Solar Cells
Perovskite solar cells (PSCs) have garnered significant attention due to their tunable bandgap, superior charge carrier properties, and easy fabrication processes, making them highly efficient energy conversion devices. Despite these advantages, nonradiative recombination due to defects in the perovskite layer continues to limit performance. This study addresses this issue by introducing 1‐CarboxyMethyl‐3‐MethylImidazolium chloride (ImAcCl) into precursor solution to enhance film quality and suppress defect‐induced recombination. The carboxylate groups (CO) and hydrogen donors (NH) in ImAcCl form coordination and hydrogen bonds, helping to reduce defect density of the perovskite film. Additive ImAcCl improves crystallinity, reduces surface roughness, and enhances charge carrier transport, leading to higher photovoltaic performance. With the ImAcCl additive, the power conversion efficiency and short‐circuit current of PSCs significantly improve by 23.92% and 25.35 mA cm−2, with a notable reduction in nonradiative recombination losses. This study highlights the significant potential of ImAcCl as an effective additive for defect passivation in PSCs, offering a promising pathway toward further efficiency improvements in next‐generation solar cells.
Carboxymethyl‐Based Ionic Liquid Engineering for Efficient and Stable Inverted Perovskite Solar Cells
Perovskite solar cells (PSCs) have garnered significant attention due to their tunable bandgap, superior charge carrier properties, and easy fabrication processes, making them highly efficient energy conversion devices. Despite these advantages, nonradiative recombination due to defects in the perovskite layer continues to limit performance. This study addresses this issue by introducing 1‐CarboxyMethyl‐3‐MethylImidazolium chloride (ImAcCl) into precursor solution to enhance film quality and suppress defect‐induced recombination. The carboxylate groups (CO) and hydrogen donors (NH) in ImAcCl form coordination and hydrogen bonds, helping to reduce defect density of the perovskite film. Additive ImAcCl improves crystallinity, reduces surface roughness, and enhances charge carrier transport, leading to higher photovoltaic performance. With the ImAcCl additive, the power conversion efficiency and short‐circuit current of PSCs significantly improve by 23.92% and 25.35 mA cm−2, with a notable reduction in nonradiative recombination losses. This study highlights the significant potential of ImAcCl as an effective additive for defect passivation in PSCs, offering a promising pathway toward further efficiency improvements in next‐generation solar cells.
- 3 May 2024
- Published by Wiley in Energy Technology
- Vol. 12 (7)
Development of Superior Nickel Oxide Layer for Boosted Hole‐Transport Performance in Perovskite Solar Cells
Although revolutionary power conversion efficiency progress has been realized for inverted perovskite solar cells (PSCs), the selection and optimization of the hole‐transporting materials (HTMs) are still crucial for fabricating high‐efficiency, stable, and low‐cost PSCs. Nickel oxide (NiOx) is widely used in the PSCs community for material design and modification. However, various NiOx synthesis processes lead to kinds of NiOx, and it is difficult to determine which NiOx is suitable for application in PSCs. Herein, two kinds of NiOx HTMs are synthesized using sol–gel processed and chemical‐calcination‐processed (CCP) routes for the preparation of PSCs. Based on the physical properties of two kinds of NiOx HTMs as well as the corresponding photovoltaic parameters of PSCs, it is demonstrated that superior NiOx HTMs is obtained by the CCP method with the following properties: high transmittance to ensure sufficient sunlight capture of perovskite, appropriate energy levels to promote hole extraction and transfer, high conductivity to support charge transfer, and a good wetting surface to boost perovskite spreading and film formation. Thus, in this study, the direction for the reasonable selection of HTMs is pointed out to prepare efficient PSCs.
- 3 May 2024
- Published by Wiley in Energy Technology
- Vol. 12 (7)
Development of Superior Nickel Oxide Layer for Boosted Hole‐Transport Performance in Perovskite Solar Cells
Although revolutionary power conversion efficiency progress has been realized for inverted perovskite solar cells (PSCs), the selection and optimization of the hole‐transporting materials (HTMs) are still crucial for fabricating high‐efficiency, stable, and low‐cost PSCs. Nickel oxide (NiOx) is widely used in the PSCs community for material design and modification. However, various NiOx synthesis processes lead to kinds of NiOx, and it is difficult to determine which NiOx is suitable for application in PSCs. Herein, two kinds of NiOx HTMs are synthesized using sol–gel processed and chemical‐calcination‐processed (CCP) routes for the preparation of PSCs. Based on the physical properties of two kinds of NiOx HTMs as well as the corresponding photovoltaic parameters of PSCs, it is demonstrated that superior NiOx HTMs is obtained by the CCP method with the following properties: high transmittance to ensure sufficient sunlight capture of perovskite, appropriate energy levels to promote hole extraction and transfer, high conductivity to support charge transfer, and a good wetting surface to boost perovskite spreading and film formation. Thus, in this study, the direction for the reasonable selection of HTMs is pointed out to prepare efficient PSCs.
- Open Access
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 11 (15) , 3465-3481
Research progress of green antisolvent for perovskite solar cells
This review primarily discusses the effects of green antisolvent treatment on crystal growth and the nucleation crystallization mechanism on the device performance and stability of perovskite solar cells.
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 11 (15) , 3465-3481
Open AccessResearch progress of green antisolvent for perovskite solar cells
This review primarily discusses the effects of green antisolvent treatment on crystal growth and the nucleation crystallization mechanism on the device performance and stability of perovskite solar cells.